Develop Reference

How to make an "if" based on value retrieved from Query?

I need to insert into a table "pass" or "fail", if from the query done there is a single fail instead of 'RProva' I have to put "fail" if the query can't find a single fail instead of 'RProva' I have to insert "pass", the query is working but I can't figure out how to do the if with the results of a query, maybe I have to use a "for"? Don't know. It is the attempt to make it, the second is the query where I have to insert the result of the possbile "IF"
1.
SqlCommand cmdRD = new SqlCommand("SELECT ResItem AS RD FROM tSE JOIN tL ON tSE.idSE=tL.idL WHERE tL.Selection=1");
var RD = cmdRD.ExecuteScalar();
var values = new List<string>();
using (cmdRD,sqliteCon)
{
using (SqlDataReader reader = cmdRD.ExecuteReader())
{
while (reader.Read())
{
values.Add(reader[0].ToString());
}
}
}
2.
SqlCommand cmd1 = new SqlCommand("INSERT INTO tSD(NomeItem,ResItemDet,DateStartDet,DateEndDet) OUTPUT inserted.Id VALUES (#NI,#RProva,#DATESE,#DATEED)");
cmd1.Parameters.AddWithValue("#DATESE", DATESE);
cmd1.Parameters.AddWithValue("#DATEED", DATEED);
cmd1.Parameters.AddWithValue("#NI", NI);
using (cmd1,sqliteCon)
{
foreach (var value in values)
{
if (value.Equals(pass))
{
cmd1.Parameters.AddWithValue("#RProva", value);
}
else
{
cmd1.Parameters.AddWithValue("#RProva", fail);
}
cmd1.ExecuteNonQuery();
}
}
int generatedId = Convert.ToInt32(cmd1.ExecuteScalar());
cmd1.Parameters.Clear();
SqlCommand cmd2 = new SqlCommand("UPDATE tSE SET FK_TSD_id = #tsdId FROM tL JOIN tSE ON tL.idL = tSE.idSE WHERE tL.Selection=1 ", sqliteCon);
cmd2.Parameters.AddWithValue("#tsdId", generatedId);
cmd2.ExecuteNonQuery();
MessageBox.Show("Dato Aggiunto");
}
sqliteCon.Close();
1.1
SqlCommand cmdRD = new SqlCommand("SELECT ResItem AS RD FROM tSE JOIN tL ON tSE.idSE=tL.idL WHERE tL.Selection=1", sqliteCon);
var RD = cmdRD.ExecuteScalar();
var tot =pass;
using (cmdRD)
{
using (SqlDataReader reader = cmdRD.ExecuteReader())
{
while (reader.Read())
{
if(reader[0].ToString()==fail)
{
tot = fail;
break;
}
}
MessageBox.Show(tot);
}
}
i'm arrived to that(1.1) it works but i've to insert the TOT into RProva

Based on your question and comment I think you misunderstood ExecuteScalar:
ExecuteScalar executes the query, and returns the first column of the first row in the result set returned by the query. learn.microsoft.com/en-us/dotnet/api/system.data.sqlclient.sqlcommand.executescalar
I dont know the Type of "RD" or "PASS", but the IF in your example (when using ExecuteScalar) seems OK. Else when you are using ExecuteReader you should use some kind of an loop to iterate through the Items. Like this:
string pass = "abc"; // guessing types and values
string fail = "failed";
string sqliteCon = "Data Source=(localdb)\\MSSQLLocalDB;Database=BooksDb";
using (SqlConnection connection = new SqlConnection(sqliteCon))
{
connection.Open();
var queryString = #"SELECT ResItem AS RD
FROM tSE
JOIN tL ON tSE.idSE = tL.idL
WHERE tL.Selection=1";
var values = new List<string>();
using (SqlCommand command = new SqlCommand(queryString, connection))
{
using (SqlDataReader reader = command.ExecuteReader())
{
while (reader.Read())
{
values.Add(reader[0].ToString());
}
}
}
var queryInsert = #"INSERT INTO tSD (NomeItem,ResItemDet,DateStartDet,DateEndDet)
VALUES (#NI, #RProva, #DATESE, #DATEED)";
using (SqlCommand command2 = new SqlCommand(queryInsert, connection))
{
foreach(var value in values)
{
command2.Parameters.Clear();
if (value.Equals(pass))
{
command2.Parameters.AddWithValue("#RProva", value);
}
else
{
command2.Parameters.AddWithValue("#RProva", fail);
}
command2.ExecuteNonQuery();
}
}
}
Theres for sure a better way, but maybe this helps you out.
EDIT:
Here is how I would implement your code example:
using (SqlConnection sqliteCon = new SqlConnection(connection))
{
sqliteCon.Open();
var values = new List<string>();
var query = "SELECT ResItem AS RD FROM tSE JOIN tL ON tSE.idSE=tL.idL WHERE tL.Selection=1";
using (SqlCommand cmdRD = new SqlCommand(query, sqliteCon))
{
var RD = cmdRD.ExecuteScalar();
using (SqlDataReader reader = cmdRD.ExecuteReader())
{
while (reader.Read())
{
values.Add(reader[0].ToString());
}
}
}
int generatedId = 0;
var query2 = "INSERT INTO tSD(NomeItem,ResItemDet,DateStartDet,DateEndDet) OUTPUT inserted.Id VALUES (#NI,#RProva,#DATESE,#DATEED)";
using (SqlCommand cmd1 = new SqlCommand(query2, sqliteCon))
{
foreach (var value in values)
{
cmd1.Parameters.Clear();
cmd1.Parameters.AddWithValue("#DATESE", DATESE);
cmd1.Parameters.AddWithValue("#DATEED", DATEED);
cmd1.Parameters.AddWithValue("#NI", NI);
if (value.Equals(pass))
{
cmd1.Parameters.AddWithValue("#RProva", value);
}
else
{
cmd1.Parameters.AddWithValue("#RProva", fail);
}
cmd1.ExecuteNonQuery();
}
generatedId = Convert.ToInt32(cmd1.ExecuteScalar());
}
var query3 = "UPDATE tSE SET FK_TSD_id = #tsdId FROM tL JOIN tSE ON tL.idL = tSE.idSE WHERE tL.Selection=1 ";
using (SqlCommand cmd2 = new SqlCommand(query3, sqliteCon))
{
cmd2.Parameters.AddWithValue("#tsdId", generatedId);
cmd2.ExecuteNonQuery();
}
}

Using Prepare select statements in C#

I am having the below code where I am querying the MySQL database. I need to replace my select query to prepare statement
public static void ValidateName(List<Employees> EmpList, string Grp)
{
var connStr = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString;
string selectQuery;
for (int i = 0; i < EmpList.Count; i++)
{
selectQuery = "Select EmpName from Employee where group = #Grp AND #Name in (FirstName, LastName);";
using (MySqlConnection conn = new MySqlConnection(connStr))
using (MySqlCommand cmd = new MySqlCommand(selectQuery, conn))
{
cmd.Parameters.Add("#Grp", MySqlDbType.VarChar).Value = Grp;
cmd.Parameters.Add("#Name", MySqlDbType.VarChar).Value = EmpList[i].Name;
conn.Open();
var reader = cmd.ExecuteReader();
List<string> lineList = new List<string>();
while (reader.Read())
{
lineList.Add(reader.GetString(0));
}
if (lineList.Count <=0)
{
WriteValidationFailure(EmpList[i], "Name doesnot exists in the DB");
}
conn.Close();
}
}
}
This code works perfectly. But for improvement I need to use the prepare statements instead of the query I am using. Because I am having similar kinds of various validation in my code, I am not sure how to reuse the parameters effectively.

You are very close. Just call cmd.Prepare(), keep references to the parameters, and reuse the command:
public static void ValidateName(List<Employees> EmpList, string Grp)
{
var connStr = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString;
string selectQuery;
selectQuery = "Select EmpName from Employee where group = #Grp AND #Name in (FirstName, LastName);";
using (MySqlConnection conn = new MySqlConnection(connStr)) {
conn.Open();
using (MySqlCommand cmd = new MySqlCommand(selectQuery, conn))
{
var prmGrp = cmd.Parameters.Add("#Grp", MySqlDbType.VarChar);
var prmName = cmd.Parameters.Add("#Name", MySqlDbType.VarChar);
cmd.Prepare();
for (int i = 0; i < EmpList.Count; i++)
{
prmGrp.Value = Grp;
prmName.Value = EmpList[i].Name;
using (var reader = cmd.ExecuteReader()) {
List<string> lineList = new List<string>();
while (reader.Read())
{
lineList.Add(reader.GetString(0));
}
if (lineList.Count <=0)
{
WriteValidationFailure(EmpList[i], "Name doesnot exists in the DB");
}
}
}
}
conn.Close();
}
}

How to optimize SQL Server query for multiple updating of records simultaneously

I have the following code for updating text records from different tables in my SQL Server database i.e.
static void Main(string[] args)
{
try
{
List<string[]> words1 = new List<string[]>();
string[] stopWords = File.ReadAllLines(#"C:\Users\~\Desktop\stopWords_E_Unique_Spaces.txt");
using (SqlConnection con = new SqlConnection("Data Source="";Initial Catalog=subset_aminer;Integrated Security=True"))
{
con.Open();
using (SqlCommand query = con.CreateCommand())
{
query.CommandText = "select p_abstract from sub_aminer_paper where aid = 1710594";
SqlDataReader reader = query.ExecuteReader();
while (reader.Read())
{
string[] ListElements = new string[2];
ListElements[0] = reader["p_abstract"].ToString();
ListElements[1] = reader["p_abstract"].ToString();
words1.Add(ListElements);
}
reader.Close();
}
}
for (int index = 0; index < words1.Count; index++)
{
foreach (string word in stopWords)
{
var item = words1.ElementAt(index);
item[1] = item[1].ToString().ToLower().Replace(word, " ").Trim();
item[1] = Regex.Replace(item[1].ToString(), #"\s+", " ");
}
}
using (SqlConnection con = new SqlConnection("Data Source="";Initial Catalog=subset_aminer;Integrated Security=True"))
{
con.Open();
int counter = 0;
for (int i = 0; i < words1.Count; i++)
{
counter++;
var item = words1.ElementAt(i);
var itemKey = item[0].ToString();
var itemValue = item[1].ToString();
string query = "select pid from sub_aminer_paper where p_abstract LIKE #p_abstract and aid = 1710594";
using (SqlCommand cmd = new SqlCommand(query, con))
{
//string inp = input;
cmd.Parameters.AddWithValue("#p_abstract", itemKey);
int id = 0;
using (SqlDataReader reader = cmd.ExecuteReader())
{
while (reader.Read())
{
id = reader.GetInt32(0);
}
reader.Close();
}
string update_query = "update sub_aminer_paper set p_abstract_SWR = #p_abstract_SWR where pid = #pid";
int res = 0;
using (SqlCommand cmd_update = new SqlCommand(update_query, con))
{
int identity = id;
string p_abstractSWR = itemValue;
cmd_update.Parameters.AddWithValue("#pid", identity);
cmd_update.Parameters.AddWithValue("#p_abstract_SWR", p_abstractSWR);
res = cmd_update.ExecuteNonQuery();
}
} Console.WriteLine(counter);
}
con.Close();
}
}
catch (Exception e)
{
Console.WriteLine("Exception: " + e.Message);
}
}
The issue is that I want to update records for multiple aid's i.e. in the query select p_abstract from sub_aminer_paper where aid = 1710594 whereas this query return multiple records for a single aid. Similarly in the update query i.e. update sub_aminer_paper set p_abstract_SWR = #p_abstract_SWR where pid = #pid whereas I want to update multiple records for multiple aid.
Please help in improving these queries. Thanks

C# use a reader in another reader solution?

I need to get some mysql data into another mysql reader request anyway to workaround that I apparently can't have 2 readers open at the same time it will all end up in a datagrid
public void DBSelectPraktikanter(object sender)
{
string Command = "SELECT * FROM forlob WHERE firmaid = N'" + firmaid + "'";
MySqlConnection sqlConnection1 = new MySqlConnection(connectionString);
MySqlCommand command = new MySqlCommand(Command, sqlConnection1);
sqlConnection1.Open();
MySqlDataReader reader = command.ExecuteReader();
var items = new List<praktikanter>();
if (reader.HasRows)
{
while (reader.Read())
{
string praktikantid = String.Format("{0}", reader["praktikantid"]);
string Command2 = "SELECT * FROM praktikanter WHERE id = N'" + praktikantid + "'";
MySqlCommand command2 = new MySqlCommand(Command, sqlConnection1);
MySqlDataReader reader2 = command.ExecuteReader();
if (reader.HasRows)
{
while (reader2.Read())
{
Praktikant = String.Format("{0}", reader["Navn"]);
}
}
string Fra = String.Format("{0}", reader["fra"]);
string Til = String.Format("{0}", reader["til"]);
items.Add(new praktikanter(Praktikant, Fra, Til));
}
}
sqlConnection1.Close();
var grid = sender as DataGrid;
grid.ItemsSource = items;
}

Instead of nesting MySqlCommands and looping the first resultset to query again the database to collect all of your data you should really use one query. Also use the using-statement to ensure that the connection gets closed even on error and use sql-parameters to avoid sql-injection issues:
var items = new List<praktikanter>();
string sql = #"SELECT p.*, f. Navn
FROM praktikanter p INNER JOIN forlob f ON p.id = f.praktikantid
WHERE f.firmaid = #firmaid";
using (var con = new MySqlConnection(connectionString))
using (var command = new MySqlCommand(sql, con))
{
command.Parameters.Add(new MySqlParameter("#firmaid", MySqlDbType.VarChar).Value = firmaid);
con.Open();
using (var rd = command.ExecuteReader())
{
while (rd.Read())
{
string praktikant = rd.GetString("Navn");
string fra = rd.GetString("Fra");
string til = rd.GetString("Til");
items.Add(new praktikanter(praktikant, fra, til));
}
}
}

How to generate List<String> from SQL query?

If I have a DbCommand defined to execute something like:
SELECT Column1 FROM Table1
What is the best way to generate a List<String> of the returned records?
No Linq etc. as I am using VS2005.

I think this is what you're looking for.
List<String> columnData = new List<String>();
using(SqlConnection connection = new SqlConnection("conn_string"))
{
connection.Open();
string query = "SELECT Column1 FROM Table1";
using(SqlCommand command = new SqlCommand(query, connection))
{
using (SqlDataReader reader = command.ExecuteReader())
{
while (reader.Read())
{
columnData.Add(reader.GetString(0));
}
}
}
}
Not tested, but this should work fine.

Loop through the Items and Add to the Collection. You can use the Add method
List<string>items=new List<string>();
using (var con= new SqlConnection("yourConnectionStringHere")
{
string qry="SELECT Column1 FROM Table1";
var cmd= new SqlCommand(qry, con);
cmd.CommandType = CommandType.Text;
con.Open();
using (SqlDataReader objReader = cmd.ExecuteReader())
{
if (objReader.HasRows)
{
while (objReader.Read())
{
//I would also check for DB.Null here before reading the value.
string item= objReader.GetString(objReader.GetOrdinal("Column1"));
items.Add(item);
}
}
}
}

Or a nested List (okay, the OP was for a single column and this is for multiple columns..):
//Base list is a list of fields, ie a data record
//Enclosing list is then a list of those records, ie the Result set
List<List<String>> ResultSet = new List<List<String>>();
using (SqlConnection connection =
new SqlConnection(connectionString))
{
// Create the Command and Parameter objects.
SqlCommand command = new SqlCommand(qString, connection);
// Create and execute the DataReader..
connection.Open();
SqlDataReader reader = command.ExecuteReader();
while (reader.Read())
{
var rec = new List<string>();
for (int i = 0; i <= reader.FieldCount-1; i++) //The mathematical formula for reading the next fields must be <=
{
rec.Add(reader.GetString(i));
}
ResultSet.Add(rec);
}
}

If you would like to query all columns
List<Users> list_users = new List<Users>();
MySqlConnection cn = new MySqlConnection("connection");
MySqlCommand cm = new MySqlCommand("select * from users",cn);
try
{
cn.Open();
MySqlDataReader dr = cm.ExecuteReader();
while (dr.Read())
{
list_users.Add(new Users(dr));
}
}
catch { /* error */ }
finally { cn.Close(); }
The User's constructor would do all the "dr.GetString(i)"

Where the data returned is a string; you could cast to a different data type:
(from DataRow row in dataTable.Rows select row["columnName"].ToString()).ToList();

This version has the same purpose of #Dave Martin but it's cleaner, getting all column, and easy to manipulate the data if you wan't to put it on Email, View, etc.
List<string> ResultSet = new List<string>();
using (SqlConnection connection = DBUtils.GetDBConnection())
{
connection.Open();
string query = "SELECT * FROM DATABASE";
using (SqlCommand command = new SqlCommand(query, connection))
{
using (SqlDataReader reader = command.ExecuteReader())
{
while (reader.Read())
{
var rec = new List<string>();
for (int i = 0; i <= reader.FieldCount - 1; i++)
{
rec.Add(reader.GetString(i));
}
string combined = string.Join("|", rec);
ResultSet.Add(combined);
}
}
}
}