CRM Dynamics 2013 SDK Update Current Accounts With 2 Values - c#

I have a scenario in CRM where I need to update existing accounts with their Vat and Registration number. There is well over 30 thousand accounts in the system. I am trying to update using the CRM SDK API but I am battling to figure out how to perform the actual update. The vat number and reg have been provided to me in a spreadsheet with their corresponding number, please note that the accounts are already in CRM so I just need to update the correct account with its Vat and Reg number, How can I do this in CRM, please advice on my code below:
public static void UpdateAllCRMAccountsWithVATAndRegistrationNumber(IOrganizationService service)
{
QueryExpression qe = new QueryExpression();
qe.EntityName = "account";
qe.ColumnSet = new ColumnSet("account", "new_vatno", "new_registrationnumber");
qe.Criteria.AddCondition("accountnumber", ConditionOperator.In,"TA10024846", "TA10028471", "TA20014015", "TA4011652", "TA4011557");
EntityCollection response = service.RetrieveMultiple(qe);
foreach (var acc in response.Entities)
{
acc.Attributes["new_vatno"] = //this is where I am struggling to figure out how I am gong to match the records up,
acc.Attributes["new_registrationnumber"] = //this is where I am struggling to figure out how I am gong to match the records up,
service.Update(acc);
}
}
How am I going to ensure that I update the correct records. I have the vat and reg numbers for the accounts in a spreadsheet, please see example image below. Can I please get advised here. Thanks.


I would load the list of VAT updates from the spreadsheet into a dictionary and then load the 30k record from CRM into memory. Then I would match them up and use ExecuteMultipleRequest to do the updates. Alternatively, you could query CRM using the account numbers (if the list is small enough.) I made the assumption you had thousands of updates to do across the record set of 30k. Note, if the Account record size was very large and couldn't be loaded into memory you would need to do account number queries.
Here is the rough code for the basic solution (I haven't tested, method should be split up, and there is minimal error handling):
public class VatInfo
{
public string RegistrationNumber;
public string TaxNumber;
public static Dictionary<string, VatInfo> GetVatList()
{
//TODO: Implement logic to load CSV file into a list. Dictionary key value should be Account Number
throw new NotImplementedException();
}
}
public class UpdateVatDemo
{
public const int maxBatchSize = 100;
public static void RunVatUpdate(IOrganizationService conn)
{
var vats = VatInfo.GetVatList();
var pagingQuery = new QueryExpression("account");
pagingQuery.ColumnSet = new ColumnSet("accountnumber");
Queue<Entity> allEnts = new Queue<Entity>();
while (true)
{
var results = conn.RetrieveMultiple(pagingQuery);
if (results.Entities != null && results.Entities.Any())
results.Entities.ToList().ForEach(allEnts.Enqueue);
if (!results.MoreRecords) break;
pagingQuery.PageInfo.PageNumber++;
pagingQuery.PageInfo.PagingCookie = results.PagingCookie;
}
ExecuteMultipleRequest emr = null;
while (allEnts.Any())
{
if (emr == null)
emr = new ExecuteMultipleRequest()
{
Settings = new ExecuteMultipleSettings()
{
ContinueOnError = true,
ReturnResponses = true
},
Requests = new OrganizationRequestCollection()
};
var ent = allEnts.Dequeue();
if (vats.ContainsKey(ent.GetAttributeValue<string>("accountnumber")))
{
var newEnt = new Entity("account", ent.Id);
newEnt.Attributes.Add("new_vatno", vats[ent.GetAttributeValue<string>("accountnumber")].TaxNumber);
newEnt.Attributes.Add("new_registrationnumber", vats[ent.GetAttributeValue<string>("accountnumber")].RegistrationNumber);
emr.Requests.Add(new UpdateRequest() { Target = newEnt });
}
if (emr.Requests.Count >= maxBatchSize)
{
try
{
var emResponse = (ExecuteMultipleResponse) conn.Execute(emr);
foreach (
var responseItem in emResponse.Responses.Where(responseItem => responseItem.Fault != null))
DisplayFault(emr.Requests[responseItem.RequestIndex],
responseItem.RequestIndex, responseItem.Fault);
}
catch (Exception ex)
{
Console.WriteLine($"Exception during ExecuteMultiple: {ex.Message}");
throw;
}
emr = null;
}
}
}
private static void DisplayFault(OrganizationRequest organizationRequest, int count,
OrganizationServiceFault organizationServiceFault)
{
Console.WriteLine(
"A fault occurred when processing {1} request, at index {0} in the request collection with a fault message: {2}",
count + 1,
organizationRequest.RequestName,
organizationServiceFault.Message);
}
}


Updating the fetched entity is bound to fail because of its entity state, which would not be null.
To update the fetched entities, you need to new up the entity:
foreach (var acc in response.Entities)
{
var updateAccount = new Entity("account") { Id = acc.Id };
updateAccount .Attributes["new_vatno"] = null; //using null as an example.
updateAccount .Attributes["new_registrationnumber"] = null;
service.Update(acc);
}


Code below shows how I managed to get it righy. forst let me explain. I imported my records into a seperate SQL table, in my code I read that table into a list in memory, I then query CRM accounts that need to be updated, I then loop though each account and check if the account number in CRM matches the account number from my sql database, if it matches, I then update the relevant Reg no and Vat no, See code below:
List<Sheet1_> crmAccountList = new List<Sheet1_>();
//var crmAccount = db.Sheet1_.Select(x => x).ToList().Take(2);
var crmAccounts = db.Sheet1_.Select(x => x).ToList();
foreach (var dbAccount in crmAccounts)
{
CRMDataObject modelObject = new CRMDataObject()
{
ID = dbAccount.ID,
Account_No = dbAccount.Account_No,
Tax_No = dbAccount.Tax_No.ToString(),
Reg_No = dbAccount.Reg_No
//Tarsus_Country = dbAccount.Main_Phone
};
}
var officialDatabaseList = crmAccounts;
foreach (var crmAcc in officialDatabaseList)
{
QueryExpression qe = new QueryExpression();
qe.EntityName = "account";
qe.ColumnSet = new ColumnSet("accountnumber", "new_vatno", "new_registrationnumber");
qe.Criteria.AddCondition("accountnumber", ConditionOperator.In,'list of account numbers go here'
EntityCollection response = service.RetrieveMultiple(qe);
foreach (var acc in response.Entities)
{
if (crmAcc.Account_No == acc.Attributes["accountnumber"].ToString())
{
//acc.Attributes["new_vatno"] = crmAcc.VAT_No.ToString();
acc.Attributes["new_registrationnumber"] = crmAcc.Reg_No.ToString();
service.Update(acc);
}
}
}

Related

Dynamics Crm Bulk Update records in a transaction

Requirement
I have the requirement where I want to update few fields on account
and create contact for it reading data from an API.
The number of records to be updated is around 100,000 so I want to
use either ExecuteTransactionRequest or ExecuteMultipleRequest so that I can execute all in batches.
Since I want the contact record to be created for the account updated I used the ExecuteTransactionRequest.
Problem -
The problem is batch size.
I have added the condition if request batch size count equals 500 then execute all the requests. However my batch can include
Update request for account and
Create request for contact
So it may happen that the batch may not be exact 500 and it would skip the execute request. How can I do this and make sure that contact record is created for each Updated Account correctly.
Any help would be appreciated. Thanks in Advance
Below is my code --
var requests = new ExecuteTransactionRequest
{
Requests = new OrganizationRequestCollection(),
ReturnResponses = returnResponses
};
foreach (var customer in customerList)
{
string custNo = customer.GetAttributeValue<string>("customernumber");
// Gets customer details from another api
var custInfo = await CustomerService.Get(custNo);
// Update the values on customer table
Entity cust = new Entity("account");
cust.Id = customer.Id;
cust["companytypecode"] = custInfo.EntityTypeCode;
cust["companytypedescription"] = custInfo .EntityTypeDescription;
var roles = custInfo.Roles.Where(c => c.RoleStatus == "ACTIVE").ToArray();
//create contact for each account
foreach(var role in roles)
{
Entity contact = new Entity("contact");
contact["FirstName"] = role.RolePerson?.FirstName;
contact["MiddleName"] = role.RolePerson?.MiddleNames;
contact["LastName"] = role.RolePerson?.LastName;
contact["AccountId"] = new EntityReference("account", customer.Id);
CreateRequest createRequest = new CreateRequest { Target = contact };
requests.Requests.Add(createRequest);
}
UpdateRequest updateRequest = new UpdateRequest { Target = cust };
requests.Requests.Add(updateRequest);
if (requests.Requests.Count == 500) // Problem is the batch size will not execute per account since it also has create request of contact. How can i make sure that each request is executed correctly
{
service.Execute(requests);
requests.Requests.Clear();
}
}
// For the last remaining accounts
if (requests.Requests.Count > 0)
{
service.Execute(requests);
}

Thank you for helping out. I resolved this with below solution. Happy to be corrected.
EntityCollection requestsCollection = new EntityCollection();
foreach (var customer in customerList)
{
string custNo= customer.GetAttributeValue<string>("customernumber");
var custInfo = await businessService.Get(custNo);
Entity cust = new Entity("account");
cust.Id = customer.Id;
cust["companytypecode"] = custInfo.EntityTypeCode;
cust["companytypedescription"] = custInfo .EntityTypeDescription;
requestsCollection.Entities.Add(cust);
var roles = custInfo.Roles.Where(c => c.RoleStatus == "ACTIVE").ToArray();
foreach(var role in roles)
{
Entity contact = new Entity("contact");
contact["FirstName"] = role.RolePerson?.FirstName;
contact["MiddleName"] = role.RolePerson?.MiddleNames;
contact["LastName"] = role.RolePerson?.LastName;
contact["AccountId"] = new EntityReference("account", customer.Id);
requests.Entities.Add(contact);
}
if (requestsCollection.Entities.Count > 500)
{
ExecuteBulkUpdate(requestsCollection);
requestsCollection = new EntityCollection();
}
}
private void ExecuteBulkUpdate(EntityCollection requestsCollection)
{
var requests = new ExecuteTransactionRequest
{
Requests = new OrganizationRequestCollection(),
ReturnResponses = returnResponses
};
foreach (var request in requestsCollection.Entities)
{
if (request.Id != Guid.Empty)
{
UpdateRequest updateRequest = new UpdateRequest { Target = request };
requests.Requests.Add(updateRequest);
}
else
{
CreateRequest createRequest = new CreateRequest { Target = request };
requests.Requests.Add(createRequest);
}
}
try
{
var responseForCreateRecords = (ExecuteTransactionResponse)service.Execute(requests);
int i = 0;
// Display the results returned in the responses.
foreach (var responseItem in responseForCreateRecords.Responses)
{
if (responseItem != null)
log.LogInformation(responseItem.Results["id"].ToString());
i++;
}
requests.Requests.Clear();
}
catch (FaultException<OrganizationServiceFault> ex)
{
log.LogInformation("Request failed for the {0} and the reason being: {1}",
((ExecuteTransactionFault)(ex.Detail)).FaultedRequestIndex + 1, ex.Detail.Message);
throw;
}
}

SharePoint CSOM not throwing expected exceptions on ExecuteQuery

Essentially what the title says, for whatever reason when I call clientContext.ExecuteQuery(); and for example the list the data is going into has a missing column, I don't get an exception, it actually just runs as expected and I have to go and investigate what might have caused the data to not appear.
The NuGet package i'm using is Microsoft.SharePoint2016.CSOM version 16.0.4690.1000
Any hints, or suggestions to point me in the right direction appreciated. It's entirely possible I'm being a bit dim here.
Here's the full code block I'm using for updating list items:
public override object UpdateEntity(object entity)
{
if (entity == null)
{
// if the definition is null throw argument null exception.
throw new ArgumentNullException(nameof(SharePointDefinition));
}
// check for incorrect type being passed in that we can still handle
if (entity is List<SharePointDefinition> definitions)
{
return UpdateEntities(definitions);
}
ExceptionHandlingScope exceptionScopeFetch = new ExceptionHandlingScope(clientContext);
ExceptionHandlingScope exceptionScopeSubmit = new ExceptionHandlingScope(clientContext);
// run single definition submit to SP.
if (entity is SharePointDefinition definition)
{
// variables.
IntegrationEventLog log = new IntegrationEventLog();
EventInformation ei = new EventInformation();
List list = null;
ListItemCollection listItemCol = null;
using (exceptionScopeFetch.StartScope())
{
using (exceptionScopeFetch.StartTry())
{
// get the required list
list = clientContext.Web.Lists.GetByTitle(definition.ListName);
// create query
listItemCol = list.GetItems(CamlQuery.CreateAllItemsQuery());
// set these items for retrieval.
clientContext.Load(listItemCol);
}
using (exceptionScopeFetch.StartCatch())
{
// Assume that if there's an exception, it can only be
// because there is no list with the specified title, so report this back.
if (exceptionScopeFetch.HasException)
{
ei = new EventInformation()
{
LoggingEventType = LoggingEventType.DataSentFailure,
LoggingSeverity = LoggingSeverity.HighSeverity,
SerialisedMessage = JsonConvert.SerializeObject(definition),
ServiceMessage = $"Hit SharePoint exception handler during list and data pull: Message: {exceptionScopeFetch.ErrorMessage}",
StackTrace = exceptionScopeFetch.ServerStackTrace,
TimeGenerated = DateTime.Now,
TimeWritten = DateTime.Now,
};
log.EventLogEntryType = EventLogEntryType.Error;
log.EventID = LoggingSeverity.HighSeverity;
log.Message = JsonConvert.SerializeObject(ei);
AddToLog(log);
}
}
using (exceptionScopeFetch.StartFinally())
{
//
}
}
// get item instances first
try
{
clientContext.ExecuteQuery();
}
catch (Exception genEx)
{
// return failure log.
ei = new EventInformation()
{
LoggingEventType = LoggingEventType.DataSentFailure,
LoggingSeverity = LoggingSeverity.HighSeverity,
SerialisedMessage = JsonConvert.SerializeObject(definition),
ServiceMessage = "Errored trying to get data from SharePoint list ready for update operation; see stacktrace for more information.",
StackTrace = genEx.StackTrace,
TimeGenerated = DateTime.Now,
TimeWritten = DateTime.Now,
};
log.EventLogEntryType = EventLogEntryType.Error;
log.EventID = LoggingSeverity.HighSeverity;
log.Message = JsonConvert.SerializeObject(ei);
AddToLog(log);
return false;
}
// this is the column we want to overwrite.
var comparisonColumn = definition.UpdateIdentifier ?? "";
//List col to dict
var listItems = listItemCol.Cast<ListItem>().ToList();
// Now we know if we were able to retrieve existing data, perform submit.
using (exceptionScopeSubmit.StartScope())
{
using (exceptionScopeSubmit.StartTry())
{
// loop through our rows
foreach (var row in definition.RowData)
{
int existingItemIndex = -1;
// see if the row exists already
if (!string.IsNullOrEmpty(comparisonColumn) && listItems.Count != 0)
{
existingItemIndex = listItems.FindIndex(x => x[comparisonColumn].ToString() == row[comparisonColumn]);
}
if (existingItemIndex != -1 && listItems.Count != 0)
{
// item exists - loop through our row columns
foreach (var keyValuePair in row)
{
// they key relates to a column, the Value to the rows colum Value.
listItems[existingItemIndex].ParseAndSetFieldValue(keyValuePair.Key, keyValuePair.Value);
}
// update this item
listItems[existingItemIndex].Update();
}
else
{
ListItemCreationInformation itemCreateInfo = new ListItemCreationInformation();
ListItem newItem = list.AddItem(itemCreateInfo);
// loop through our row columns
foreach (var keyValuePair in row)
{
// they key relates to a column, the Value to the rows colum Value.
newItem[keyValuePair.Key] = keyValuePair.Value;
}
newItem.Update();
}
}
}
using (exceptionScopeSubmit.StartCatch())
{
// Assume that if there's an exception, it can only be
// because there is no list with the specified title, so report this back.
if (exceptionScopeFetch.HasException)
{
ei = new EventInformation()
{
LoggingEventType = LoggingEventType.DataSentFailure,
LoggingSeverity = LoggingSeverity.HighSeverity,
SerialisedMessage = JsonConvert.SerializeObject(definition),
ServiceMessage = $"Error at SharePoint exception handler during submit to list: Message: {exceptionScopeFetch.ErrorMessage}",
StackTrace = exceptionScopeFetch.ServerStackTrace,
TimeGenerated = DateTime.Now,
TimeWritten = DateTime.Now,
};
log.EventLogEntryType = EventLogEntryType.Error;
log.EventID = LoggingSeverity.HighSeverity;
log.Message = JsonConvert.SerializeObject(ei);
AddToLog(log);
}
}
using (exceptionScopeSubmit.StartFinally())
{
//
}
}
// try to execute submit.
try
{
clientContext.ExecuteQuery();
ei = new EventInformation()
{
LoggingEventType = LoggingEventType.DataSentSuccess,
LoggingSeverity = LoggingSeverity.Information,
SerialisedMessage = JsonConvert.SerializeObject(definition),
ServiceMessage = "No exceptions were thrown from the Execution process.",
StackTrace = "",
TimeGenerated = DateTime.Now,
TimeWritten = DateTime.Now,
};
log.EventLogEntryType = EventLogEntryType.Information;
log.EventID = LoggingSeverity.Information;
log.Message = JsonConvert.SerializeObject(ei);
}
catch (Exception genEx)
{
ei = new EventInformation()
{
LoggingEventType = LoggingEventType.DataSentFailure,
LoggingSeverity = LoggingSeverity.HighSeverity,
SerialisedMessage = JsonConvert.SerializeObject(definition),
ServiceMessage = $"Data failed to be updated within SharePoint - {genEx.Message} - see stacktrace for more information.",
StackTrace = genEx.StackTrace,
TimeGenerated = DateTime.Now,
TimeWritten = DateTime.Now,
};
log.EventLogEntryType = EventLogEntryType.Error;
log.EventID = LoggingSeverity.HighSeverity;
log.Message = JsonConvert.SerializeObject(ei);
AddToLog(log);
return false;
}
AddToLog(log);
return true;
}
else
{
// If a different definition type is passed in throw an appropriate exception.
// This should be caught at runtime only.
throw new TypeLoadException(nameof(SharePointDefinition));
}
}

I checked the code you posted and I see that you are updating the list of objects, in your case listItems, instead of a ListItem in ListItemCollection, in your case listItemCol.
To be more clear, I believe you can try to replace listItems with listItemCol.
For instance, instead of:
listItems[existingItemIndex].ParseAndSetFieldValue(keyValuePair.Key, keyValuePair.Value);
use
listItemCol[existingItemIndex][keyValuePair.Key] = keyValuePair.Value;

So I went away and re-read a lot of documentation and looked over some examples, and I wondered why the exception handler never returned errors even though it's obvious there were issues with the query being executed. If you look at the Microsoft documentation and their example here you'll see that they don't show you how to use exceptionScopeSubmit.HasException component of the exception scope object. Which lead to a really stupid assumption on my part. It turns out that the exception block runs on the SharePoint server and should be used to fix issues you might have caused during an expected exception in your query.
Not only that but wrapping the ExecuteQuery in the try catch is redundant when using an exception scope as it means that method will no longer throw an exception. You actually have to assess exceptionScopeSubmit.HasException after the execution to pull back some more detailing information on errors reported by the SharePoint server side execution of your query.
So now I'm using it as below, and I can get detailed error information without having to do some stupid manual debugging which would easily take me hours to track down silly issues. So in case anyone stumbles across this having the same issues, I hope it helps.
ExceptionHandlingScope exceptionScopeFetch = new ExceptionHandlingScope(clientContext);
// variables.
IntegrationEventLog log = new IntegrationEventLog();
EventInformation ei = new EventInformation();
List list = null;
ListItemCollection listItemCol = null;
using (exceptionScopeFetch.StartScope())
{
using (exceptionScopeFetch.StartTry())
{
// get the required list
list = clientContext.Web.Lists.GetByTitle(definition.ListName);
// create query
listItemCol = list.GetItems(CamlQuery.CreateAllItemsQuery());
// set these items for retrieval.
clientContext.Load(listItemCol);
}
using (exceptionScopeFetch.StartCatch())
{
//
}
using (exceptionScopeFetch.StartFinally())
{
//
}
}
// get item instances first
clientContext.ExecuteQuery();
if (exceptionScopeSubmit.HasException)
{
ei = new EventInformation()
{
LoggingEventType = LoggingEventType.DataSentFailure,
LoggingSeverity = LoggingSeverity.HighSeverity,
SerialisedMessage = JsonConvert.SerializeObject(definition),
ServiceMessage = $"Error at SharePoint exception handler during submit to list: Message: {exceptionScopeFetch.ErrorMessage}",
StackTrace = exceptionScopeFetch.ServerStackTrace,
TimeGenerated = DateTime.Now,
TimeWritten = DateTime.Now,
};
log.EventLogEntryType = EventLogEntryType.Error;
log.EventID = LoggingSeverity.HighSeverity;
log.Message = JsonConvert.SerializeObject(ei);
AddToLog(log);
}

Stripe API - C#/.NET List All Customers problems with pagination

this might be a simple answer due to my inexperience with C# and .NET. I have two Stripe Test Accounts. TL:DR; is I am essentially looking for a Customers.all solution.
The source account has all the customer, card, and charge data.
The destination account has the copied card and customer data done by Stripe Support.
I have code that loops through the pulls all the data from the source account. It then finds the customer data from the destination account using the collection of customer/card data from the source. After that it then recreates the charges from the source account into the destination account.
I am able to successfully copy the first 100 charges into the destination account using information from the source account but I am having the hardest time getting the rest of the customers.
This is what I have so far:
public static void GenerateDestinationChargeData()
{
// code to get collection of customer data from destination account
StripeConfiguration.SetApiKey(destinationTestKey);
var customerService = new StripeCustomerService();
IEnumerable<StripeCustomer> customerItems = customerService.List(
new StripeCustomerListOptions()
{
Limit = 100,
//this is what I cannot figure out, eventually to get all of the customers from the destination account
StartingAfter = customerItems.LastOrDefault().Id
}
);
// loop through collection of customers from destination acct to fetch customer charge data from source account
foreach (var i in customerItems)
{
bool isError = false;
var liveChargeService = new StripeChargeService();
StripeConfiguration.SetApiKey(sourceTestKey);
StripeList<StripeCharge> chargeItems = new StripeList<StripeCharge>();
chargeItems = liveChargeService.List(
new StripeChargeListOptions()
{
Limit = 100,
CustomerId = i.Id
}
);
// loop through customer charge data from source and re-create charge data on destination Acct
foreach (var c in chargeItems.Data)
{
StripeConfiguration.SetApiKey(sourceTestKey);
var emailReceipt = "";
Dictionary<string, string> chargeMetaData = new Dictionary<string, string>();
var onBehalfOf = "";
var transferGroup = "";
var chargeDescription = "";
var chargeCaptured = "";
var chargeCurrency = "";
var chargeStatementDescriptor = "";
if (c.ReceiptEmail != null)
{
emailReceipt = c.ReceiptEmail;
}
if (c.Metadata != null)
{
chargeMetaData = c.Metadata;
}
if (c.OnBehalfOf != null)
{
onBehalfOf = c.OnBehalfOf.ToString();
}
if (c.TransferGroup != null)
{
transferGroup = c.TransferGroup;
}
if (c.Description != null)
{
chargeDescription = c.Description;
}
if (c.Captured != null)
{
chargeCaptured = c.Captured.ToString();
}
if (c.Currency != null)
{
chargeCurrency = c.Currency;
}
if (c.StatementDescriptor != null)
{
chargeStatementDescriptor = c.StatementDescriptor;
}
try
{
var chargeOptions = new StripeChargeCreateOptions();
chargeOptions.CustomerId = i.Id;
chargeOptions.ReceiptEmail = emailReceipt;
chargeOptions.Metadata = chargeMetaData;
chargeOptions.Description = chargeDescription;
chargeOptions.Capture = c.Captured;
chargeOptions.Currency = chargeCurrency;
chargeOptions.Amount = c.Amount;
chargeOptions.StatementDescriptor = chargeStatementDescriptor;
StripeChargeService chargeService = new StripeChargeService(destinationTestKey);
StripeCharge stripeCharge = chargeService.Create(chargeOptions);
}
catch (Exception ex)
{
Utility.NotifyDevAdminException("test", ex);
isError = true;
}
if (isError) continue;
}
}
}
Thank you so much :)

Since we cannot do a Customers.all with this current Stripe API, the solution is to set an empty variable and assign it the last Customer ID in the first set of 100 that we get and continue the query from that last assigned value
var lastId = String.Empty;
if (String.IsNullOrEmpty(lastId))
{
StripeConfiguration.SetApiKey(sourceCustomerAccountAPIKey);
customerItems = customerService.List(
new StripeCustomerListOptions(){ Limit = 100 });
}
else
{
StripeConfiguration.SetApiKey(sourceCustomerAccountAPIKey);
customerItems = customerService.List(
new StripeCustomerListOptions() {
Limit = 100,
StartingAfter = lastId });
}
lastId = customerItems.LastOrDefault().Id;

Executing multiple requests xrm sdk [duplicate]

I am using ExecuteMultipleResponse method to insert 10 account records at a time using SSIS.
List<Entity> _Accounts = new List<Entity>();
// Check the batch size and process
public override void InputAccount_ProcessInput(InputAccountBuffer Buffer)
{
//List<int> personIDs = new List<int>();
int index = 0;
while (Buffer.NextRow())
{
_Accounts.Add(InputAccountFromBuffer(Buffer));
//personIDs.Add(int.Parse(Buffer.sPersonID));
index++;
if (index == 10)
{
ImportBatch();
index = 0;
}
}
ImportBatch();
}
private void ImportBatch()
{
if (_Accounts.Count > 0)
{
var multipleRequest = new ExecuteMultipleRequest()
{
Settings = new ExecuteMultipleSettings()
{
ContinueOnError = true,
ReturnResponses = true
},
Requests = new OrganizationRequestCollection()
};
foreach (var profContact in _Accounts)
{
CreateRequest reqCreate = new CreateRequest();
reqCreate.Target = profContact;
reqCreate.Parameters.Add("SuppressDuplicateDetection", false);
multipleRequest.Requests.Add(reqCreate);
}
ExecuteMultipleResponse multipleResponses = (ExecuteMultipleResponse)organizationservice.Execute(multipleRequest);
var responses = (ExecuteMultipleResponseItemCollection)multipleResponses.Results["Responses"];
foreach (var response in responses)
{
if (response.Fault != null)
{
// A fault has occurred, handle it here
}
else
{
// THIS IS WHERE I KNOW THE GUID VALUE EXIST.
}
}
//IEnumerator f = multipleResponses.Responses.GetEnumerator();
_Accounts.Clear();
}
}
Above code is working fine, however, I now need to read and store Guids from response to a List. This information is essential for the next step in the package. I know, if I am creating single record I can simply say,
Guid newRecord = _service.Create(account);
I even managed to get down to check if the response have 'Fault' or not and if it doesn't have fault then Guid value should exist in the response.
Running response.Response.Results.Values in QuickWatch shows me the guid but I just can't find a way to read it directly and store it as a Guid.

The guid of a created record should be stored in the OrganizationResponse which can be found inside the ExecuteMultipleResponseItem
Try the following to get the guid as a string:
string id = response.Response.Results["id"].ToString()
If it works as expected you should also be able to instantiate a guid, if needed:
Guid guid = new Guid(id);

ExecuteMultipleResponse; How to read and store Guids from the response

I am using ExecuteMultipleResponse method to insert 10 account records at a time using SSIS.
List<Entity> _Accounts = new List<Entity>();
// Check the batch size and process
public override void InputAccount_ProcessInput(InputAccountBuffer Buffer)
{
//List<int> personIDs = new List<int>();
int index = 0;
while (Buffer.NextRow())
{
_Accounts.Add(InputAccountFromBuffer(Buffer));
//personIDs.Add(int.Parse(Buffer.sPersonID));
index++;
if (index == 10)
{
ImportBatch();
index = 0;
}
}
ImportBatch();
}
private void ImportBatch()
{
if (_Accounts.Count > 0)
{
var multipleRequest = new ExecuteMultipleRequest()
{
Settings = new ExecuteMultipleSettings()
{
ContinueOnError = true,
ReturnResponses = true
},
Requests = new OrganizationRequestCollection()
};
foreach (var profContact in _Accounts)
{
CreateRequest reqCreate = new CreateRequest();
reqCreate.Target = profContact;
reqCreate.Parameters.Add("SuppressDuplicateDetection", false);
multipleRequest.Requests.Add(reqCreate);
}
ExecuteMultipleResponse multipleResponses = (ExecuteMultipleResponse)organizationservice.Execute(multipleRequest);
var responses = (ExecuteMultipleResponseItemCollection)multipleResponses.Results["Responses"];
foreach (var response in responses)
{
if (response.Fault != null)
{
// A fault has occurred, handle it here
}
else
{
// THIS IS WHERE I KNOW THE GUID VALUE EXIST.
}
}
//IEnumerator f = multipleResponses.Responses.GetEnumerator();
_Accounts.Clear();
}
}
Above code is working fine, however, I now need to read and store Guids from response to a List. This information is essential for the next step in the package. I know, if I am creating single record I can simply say,
Guid newRecord = _service.Create(account);
I even managed to get down to check if the response have 'Fault' or not and if it doesn't have fault then Guid value should exist in the response.
Running response.Response.Results.Values in QuickWatch shows me the guid but I just can't find a way to read it directly and store it as a Guid.

The guid of a created record should be stored in the OrganizationResponse which can be found inside the ExecuteMultipleResponseItem
Try the following to get the guid as a string:
string id = response.Response.Results["id"].ToString()
If it works as expected you should also be able to instantiate a guid, if needed:
Guid guid = new Guid(id);

Categories

Resources