Develop Reference

Factory CreateInstance argument method not necessary for a specific subtype

I have a factory class and CreateInstance method
CreateInstance(EntityModel.TipoEntitaTipoParametroEntita tipoParametroEntita, IParametroEntitaMultiValoreDataSourceProvider parametroEntitaMultiValoreDataSourceProvider)
The factory can instantiate two differents subtypes depending on the value of tipoParametroEntita.TipoCampo.IdTipoCampo
The point is the second argument of CreateInstance (parametroEntitaMultiValoreDataSourceProvider) is used only for creating instance of TipoEntitaTipoParametroEntitaMultiValore
whereas is not used in creating instance of TipoEntitaTipoParametroEntitaSingoloValore
public class TipoEntitaTipoParametroEntitaFactory : ITipoEntitaTipoParametroEntitaFactory
{
/// <summary>
/// Creates an instance of TipoEntitaTipoParametroEntitaSingoloValore or TipoEntitaTipoParametroEntitaMultiValore
/// </summary>
public TipoEntitaTipoParametroEntita CreateInstance(EntityModel.TipoEntitaTipoParametroEntita tipoParametroEntita, IParametroEntitaMultiValoreDataSourceProvider parametroEntitaMultiValoreDataSourceProvider)
{
if (tipoParametroEntita.TipoCampo.IdTipoCampo == (int)EntityModel.Enum.TipoCampo.CampoLibero ||
tipoParametroEntita.TipoCampo.IdTipoCampo == (int)EntityModel.Enum.TipoCampo.CampoLiberoMultiLinea)
{
return new TipoEntitaTipoParametroEntitaSingoloValore(tipoParametroEntita);
}
if (tipoParametroEntita.TipoCampo.IdTipoCampo ==
(int)EntityModel.Enum.TipoCampo.DropdownListQueryDataSource ||
tipoParametroEntita.TipoCampo.IdTipoCampo ==
(int)EntityModel.Enum.TipoCampo.DropdownListTableDataSource)
{
return new TipoEntitaTipoParametroEntitaMultiValore(tipoParametroEntita,
parametroEntitaMultiValoreDataSourceProvider);
}
return null;
}
}
I'm doubtful about this adopted pattern as I always need to pass an instance of IParametroEntitaMultiValoreDataSourceProvider even when it is not necessary and moreover someone reading the signature of the method might be led to think that for creating any type of TipoEntitaTipoParametroEntita an instance of IParametroEntitaMultiValoreDataSourceProvider is required.
What would be a better approach? Two distinct factories? Only one factory and two CreateInstance (one returning TipoEntitaTipoParametroEntitaSingoloValore and the other TipoEntitaTipoParametroEntitaMultiValore)?
I both of the cases I should already know which factory or which CreateInstance to call so I should check tipoParametroEntita.TipoCampo.IdTipoCampo every time in advance. But I'd like to keep this logic only in one place.

From a functional programming perspective, I use to look at the Visitor pattern when dealing with the so called "algebraic data types" i.e. different subtypes. Anyway I'm not always a fan of this approach, since it can be difficult at the beginning.
Therefore I'll give only the basic idea, so that you can quickly decide if you're interested. Also notice that the goal here is to write a code with function signatures such that errors can be spot at compile time, as opposite to runtime.
Now in a nutshell the classical way to achieve this, by leveraging a C# language type check feature, is to define a new visitor including all the different overrides of your CreateInstance with signatures:
public IEntitaTipoParametroEntita CreateInstance(SubType1 subType1)
{
// ...
}
public IEntitaTipoParametroEntita CreateInstance(SubType2 subType2)
{
// ...
}
where each subtype should have its own
IEntitaTipoParametroEntita accept(CreateVisitor visitor)
{
visitor.CreateInstance(this);
}
So that you can avoid if and switch and similar error prone subtype checking syntaxes and simply instantiate the specific visitor instead and just pass it to any subtype to be processed.
DB tables
If there is significant commonality between subtypes, then splitting the subtypes out into separate physical tables is probably of little value.
Therefore, as far as DB design is concerned, "table per hierarchy" (which utilizes a type discriminator column to hold type information) seems to better fit your example: it enables polymorphism by denormalizing the SQL schema. To instruct Entity Framework to use this strategy, all that is required is to derive a class from the DbContext class, and add a DBSet property for the supertype, whilst not adding DBSet properties for subtypes.
Reading links
The Visitor Pattern - A Better Implementation
Correcting the Visitor pattern
Inheritance Modelling Patterns with Entity Framework 6 Code First
Supertype/Subtype deciding between category

What is the purpose of declaring a type different to the type you are instantiating? [duplicate]

I have seen this mentioned a few times and I am not clear on what it means. When and why would you do this?
I know what interfaces do, but the fact I am not clear on this makes me think I am missing out on using them correctly.
Is it just so if you were to do:
IInterface classRef = new ObjectWhatever()
You could use any class that implements IInterface? When would you need to do that? The only thing I can think of is if you have a method and you are unsure of what object will be passed except for it implementing IInterface. I cannot think how often you would need to do that.
Also, how could you write a method that takes in an object that implements an interface? Is that possible?

There are some wonderful answers on here to this questions that get into all sorts of great detail about interfaces and loosely coupling code, inversion of control and so on. There are some fairly heady discussions, so I'd like to take the opportunity to break things down a bit for understanding why an interface is useful.
When I first started getting exposed to interfaces, I too was confused about their relevance. I didn't understand why you needed them. If we're using a language like Java or C#, we already have inheritance and I viewed interfaces as a weaker form of inheritance and thought, "why bother?" In a sense I was right, you can think of interfaces as sort of a weak form of inheritance, but beyond that I finally understood their use as a language construct by thinking of them as a means of classifying common traits or behaviors that were exhibited by potentially many non-related classes of objects.
For example -- say you have a SIM game and have the following classes:
class HouseFly inherits Insect {
void FlyAroundYourHead(){}
void LandOnThings(){}
}
class Telemarketer inherits Person {
void CallDuringDinner(){}
void ContinueTalkingWhenYouSayNo(){}
}
Clearly, these two objects have nothing in common in terms of direct inheritance. But, you could say they are both annoying.
Let's say our game needs to have some sort of random thing that annoys the game player when they eat dinner. This could be a HouseFly or a Telemarketer or both -- but how do you allow for both with a single function? And how do you ask each different type of object to "do their annoying thing" in the same way?
The key to realize is that both a Telemarketer and HouseFly share a common loosely interpreted behavior even though they are nothing alike in terms of modeling them. So, let's make an interface that both can implement:
interface IPest {
void BeAnnoying();
}
class HouseFly inherits Insect implements IPest {
void FlyAroundYourHead(){}
void LandOnThings(){}
void BeAnnoying() {
FlyAroundYourHead();
LandOnThings();
}
}
class Telemarketer inherits Person implements IPest {
void CallDuringDinner(){}
void ContinueTalkingWhenYouSayNo(){}
void BeAnnoying() {
CallDuringDinner();
ContinueTalkingWhenYouSayNo();
}
}
We now have two classes that can each be annoying in their own way. And they do not need to derive from the same base class and share common inherent characteristics -- they simply need to satisfy the contract of IPest -- that contract is simple. You just have to BeAnnoying. In this regard, we can model the following:
class DiningRoom {
DiningRoom(Person[] diningPeople, IPest[] pests) { ... }
void ServeDinner() {
when diningPeople are eating,
foreach pest in pests
pest.BeAnnoying();
}
}
Here we have a dining room that accepts a number of diners and a number of pests -- note the use of the interface. This means that in our little world, a member of the pests array could actually be a Telemarketer object or a HouseFly object.
The ServeDinner method is called when dinner is served and our people in the dining room are supposed to eat. In our little game, that's when our pests do their work -- each pest is instructed to be annoying by way of the IPest interface. In this way, we can easily have both Telemarketers and HouseFlys be annoying in each of their own ways -- we care only that we have something in the DiningRoom object that is a pest, we don't really care what it is and they could have nothing in common with other.
This very contrived pseudo-code example (that dragged on a lot longer than I anticipated) is simply meant to illustrate the kind of thing that finally turned the light on for me in terms of when we might use an interface. I apologize in advance for the silliness of the example, but hope that it helps in your understanding. And, to be sure, the other posted answers you've received here really cover the gamut of the use of interfaces today in design patterns and development methodologies.

The specific example I used to give to students is that they should write
List myList = new ArrayList(); // programming to the List interface
instead of
ArrayList myList = new ArrayList(); // this is bad
These look exactly the same in a short program, but if you go on to use myList 100 times in your program you can start to see a difference. The first declaration ensures that you only call methods on myList that are defined by the List interface (so no ArrayList specific methods). If you've programmed to the interface this way, later on you can decide that you really need
List myList = new TreeList();
and you only have to change your code in that one spot. You already know that the rest of your code doesn't do anything that will be broken by changing the implementation because you programmed to the interface.
The benefits are even more obvious (I think) when you're talking about method parameters and return values. Take this for example:
public ArrayList doSomething(HashMap map);
That method declaration ties you to two concrete implementations (ArrayList and HashMap). As soon as that method is called from other code, any changes to those types probably mean you're going to have to change the calling code as well. It would be better to program to the interfaces.
public List doSomething(Map map);
Now it doesn't matter what kind of List you return, or what kind of Map is passed in as a parameter. Changes that you make inside the doSomething method won't force you to change the calling code.

Programming to an interface is saying, "I need this functionality and I don't care where it comes from."
Consider (in Java), the List interface versus the ArrayList and LinkedList concrete classes. If all I care about is that I have a data structure containing multiple data items that I should access via iteration, I'd pick a List (and that's 99% of the time). If I know that I need constant-time insert/delete from either end of the list, I might pick the LinkedList concrete implementation (or more likely, use the Queue interface). If I know I need random access by index, I'd pick the ArrayList concrete class.

Programming to an interface has absolutely nothing to do with abstract interfaces like we see in Java or .NET. It isn't even an OOP concept.
What it means is don't go messing around with the internals of an object or data structure. Use the Abstract Program Interface, or API, to interact with your data. In Java or C# that means using public properties and methods instead of raw field access. For C that means using functions instead of raw pointers.
EDIT: And with databases it means using views and stored procedures instead of direct table access.

Using interfaces is a key factor in making your code easily testable in addition to removing unnecessary couplings between your classes. By creating an interface that defines the operations on your class, you allow classes that want to use that functionality the ability to use it without depending on your implementing class directly. If later on you decide to change and use a different implementation, you need only change the part of the code where the implementation is instantiated. The rest of the code need not change because it depends on the interface, not the implementing class.
This is very useful in creating unit tests. In the class under test you have it depend on the interface and inject an instance of the interface into the class (or a factory that allows it to build instances of the interface as needed) via the constructor or a property settor. The class uses the provided (or created) interface in its methods. When you go to write your tests, you can mock or fake the interface and provide an interface that responds with data configured in your unit test. You can do this because your class under test deals only with the interface, not your concrete implementation. Any class implementing the interface, including your mock or fake class, will do.
EDIT: Below is a link to an article where Erich Gamma discusses his quote, "Program to an interface, not an implementation."
http://www.artima.com/lejava/articles/designprinciples.html

You should look into Inversion of Control:
Martin Fowler: Inversion of Control Containers and the Dependency Injection pattern
Wikipedia: Inversion of Control
In such a scenario, you wouldn't write this:
IInterface classRef = new ObjectWhatever();
You would write something like this:
IInterface classRef = container.Resolve<IInterface>();
This would go into a rule-based setup in the container object, and construct the actual object for you, which could be ObjectWhatever. The important thing is that you could replace this rule with something that used another type of object altogether, and your code would still work.
If we leave IoC off the table, you can write code that knows that it can talk to an object that does something specific, but not which type of object or how it does it.
This would come in handy when passing parameters.
As for your parenthesized question "Also, how could you write a method that takes in an object that implements an Interface? Is that possible?", in C# you would simply use the interface type for the parameter type, like this:
public void DoSomethingToAnObject(IInterface whatever) { ... }
This plugs right into the "talk to an object that does something specific." The method defined above knows what to expect from the object, that it implements everything in IInterface, but it doesn't care which type of object it is, only that it adheres to the contract, which is what an interface is.
For instance, you're probably familiar with calculators and have probably used quite a few in your days, but most of the time they're all different. You, on the other hand, knows how a standard calculator should work, so you're able to use them all, even if you can't use the specific features that each calculator has that none of the other has.
This is the beauty of interfaces. You can write a piece of code, that knows that it will get objects passed to it that it can expect certain behavior from. It doesn't care one hoot what kind of object it is, only that it supports the behavior needed.
Let me give you a concrete example.
We have a custom-built translation system for windows forms. This system loops through controls on a form and translate text in each. The system knows how to handle basic controls, like the-type-of-control-that-has-a-Text-property, and similar basic stuff, but for anything basic, it falls short.
Now, since controls inherit from pre-defined classes that we have no control over, we could do one of three things:
Build support for our translation system to detect specifically which type of control it is working with, and translate the correct bits (maintenance nightmare)
Build support into base classes (impossible, since all the controls inherit from different pre-defined classes)
Add interface support
So we did nr. 3. All our controls implement ILocalizable, which is an interface that gives us one method, the ability to translate "itself" into a container of translation text/rules. As such, the form doesn't need to know which kind of control it has found, only that it implements the specific interface, and knows that there is a method where it can call to localize the control.

Code to the Interface Not the Implementation has NOTHING to do with Java, nor its Interface construct.
This concept was brought to prominence in the Patterns / Gang of Four books but was most probably around well before that. The concept certainly existed well before Java ever existed.
The Java Interface construct was created to aid in this idea (among other things), and people have become too focused on the construct as the centre of the meaning rather than the original intent. However, it is the reason we have public and private methods and attributes in Java, C++, C#, etc.
It means just interact with an object or system's public interface. Don't worry or even anticipate how it does what it does internally. Don't worry about how it is implemented. In object-oriented code, it is why we have public vs. private methods/attributes. We are intended to use the public methods because the private methods are there only for use internally, within the class. They make up the implementation of the class and can be changed as required without changing the public interface. Assume that regarding functionality, a method on a class will perform the same operation with the same expected result every time you call it with the same parameters. It allows the author to change how the class works, its implementation, without breaking how people interact with it.
And you can program to the interface, not the implementation without ever using an Interface construct. You can program to the interface not the implementation in C++, which does not have an Interface construct. You can integrate two massive enterprise systems much more robustly as long as they interact through public interfaces (contracts) rather than calling methods on objects internal to the systems. The interfaces are expected to always react the same expected way given the same input parameters; if implemented to the interface and not the implementation. The concept works in many places.
Shake the thought that Java Interfaces have anything what-so-ever to do with the concept of 'Program to the Interface, Not the Implementation'. They can help apply the concept, but they are not the concept.

It sounds like you understand how interfaces work but are unsure of when to use them and what advantages they offer. Here are a few examples of when an interface would make sense:
// if I want to add search capabilities to my application and support multiple search
// engines such as Google, Yahoo, Live, etc.
interface ISearchProvider
{
string Search(string keywords);
}
then I could create GoogleSearchProvider, YahooSearchProvider, LiveSearchProvider, etc.
// if I want to support multiple downloads using different protocols
// HTTP, HTTPS, FTP, FTPS, etc.
interface IUrlDownload
{
void Download(string url)
}
// how about an image loader for different kinds of images JPG, GIF, PNG, etc.
interface IImageLoader
{
Bitmap LoadImage(string filename)
}
then create JpegImageLoader, GifImageLoader, PngImageLoader, etc.
Most add-ins and plugin systems work off interfaces.
Another popular use is for the Repository pattern. Say I want to load a list of zip codes from different sources
interface IZipCodeRepository
{
IList<ZipCode> GetZipCodes(string state);
}
then I could create an XMLZipCodeRepository, SQLZipCodeRepository, CSVZipCodeRepository, etc. For my web applications, I often create XML repositories early on so I can get something up and running before the SQL Database is ready. Once the database is ready I write an SQLRepository to replace the XML version. The rest of my code remains unchanged since it runs solely off of interfaces.
Methods can accept interfaces such as:
PrintZipCodes(IZipCodeRepository zipCodeRepository, string state)
{
foreach (ZipCode zipCode in zipCodeRepository.GetZipCodes(state))
{
Console.WriteLine(zipCode.ToString());
}
}

It makes your code a lot more extensible and easier to maintain when you have sets of similar classes. I am a junior programmer, so I am no expert, but I just finished a project that required something similar.
I work on client side software that talks to a server running a medical device. We are developing a new version of this device that has some new components that the customer must configure at times. There are two types of new components, and they are different, but they are also very similar. Basically, I had to create two config forms, two lists classes, two of everything.
I decided that it would be best to create an abstract base class for each control type that would hold almost all of the real logic, and then derived types to take care of the differences between the two components. However, the base classes would not have been able to perform operations on these components if I had to worry about types all of the time (well, they could have, but there would have been an "if" statement or switch in every method).
I defined a simple interface for these components and all of the base classes talk to this interface. Now when I change something, it pretty much 'just works' everywhere and I have no code duplication.

A lot of explanation out there, but to make it even more simpler. Take for instance a List. One can implement a list with as:
An internal array
A linked list
Other implementations
By building to an interface, say a List. You only code as to definition of List or what List means in reality.
You could use any type of implementation internally say an array implementation. But suppose you wish to change the implementation for some reason say a bug or performance. Then you just have to change the declaration List<String> ls = new ArrayList<String>() to List<String> ls = new LinkedList<String>().
Nowhere else in code, will you have to change anything else; Because everything else was built on the definition of List.

If you program in Java, JDBC is a good example. JDBC defines a set of interfaces but says nothing about the implementation. Your applications can be written against this set of interfaces. In theory, you pick some JDBC driver and your application would just work. If you discover there's a faster or "better" or cheaper JDBC driver or for whatever reason, you can again in theory re-configure your property file, and without having to make any change in your application, your application would still work.

I am a late comer to this question, but I want to mention here that the line "Program to an interface, not an implementation" had some good discussion in the GoF (Gang of Four) Design Patterns book.
It stated, on p. 18:
Program to an interface, not an implementation
Don't declare variables to be instances of particular concrete classes. Instead, commit only to an interface defined by an abstract class. You will find this to be a common theme of the design patterns in this book.
and above that, it began with:
There are two benefits to manipulating objects solely in terms of the interface defined by abstract classes:
Clients remain unaware of the specific types of objects they use, as long as the objects adhere to the interface that clients expect.
Clients remain unaware of the classes that implement these objects. Clients only know about the abstract class(es) defining the interface.
So in other words, don't write it your classes so that it has a quack() method for ducks, and then a bark() method for dogs, because they are too specific for a particular implementation of a class (or subclass). Instead, write the method using names that are general enough to be used in the base class, such as giveSound() or move(), so that they can be used for ducks, dogs, or even cars, and then the client of your classes can just say .giveSound() rather than thinking about whether to use quack() or bark() or even determine the type before issuing the correct message to be sent to the object.

Programming to Interfaces is awesome, it promotes loose coupling. As #lassevk mentioned, Inversion of Control is a great use of this.
In addition, look into SOLID principals. here is a video series
It goes through a hard coded (strongly coupled example) then looks at interfaces, finally progressing to a IoC/DI tool (NInject)

To add to the existing posts, sometimes coding to interfaces helps on large projects when developers work on separate components simultaneously. All you need is to define interfaces upfront and write code to them while other developers write code to the interface you are implementing.

It can be advantageous to program to interfaces, even when we are not depending on abstractions.
Programming to interfaces forces us to use a contextually appropriate subset of an object. That helps because it:
prevents us from doing contextually inappropriate things, and
lets us safely change the implementation in the future.
For example, consider a Person class that implements the Friend and the Employee interface.
class Person implements AbstractEmployee, AbstractFriend {
}
In the context of the person's birthday, we program to the Friend interface, to prevent treating the person like an Employee.
function party() {
const friend: Friend = new Person("Kathryn");
friend.HaveFun();
}
In the context of the person's work, we program to the Employee interface, to prevent blurring workplace boundaries.
function workplace() {
const employee: Employee = new Person("Kathryn");
employee.DoWork();
}
Great. We have behaved appropriately in different contexts, and our software is working well.
Far into the future, if our business changes to work with dogs, we can change the software fairly easily. First, we create a Dog class that implements both Friend and Employee. Then, we safely change new Person() to new Dog(). Even if both functions have thousands of lines of code, that simple edit will work because we know the following are true:
Function party uses only the Friend subset of Person.
Function workplace uses only the Employee subset of Person.
Class Dog implements both the Friend and Employee interfaces.
On the other hand, if either party or workplace were to have programmed against Person, there would be a risk of both having Person-specific code. Changing from Person to Dog would require us to comb through the code to extirpate any Person-specific code that Dog does not support.
The moral: programming to interfaces helps our code to behave appropriately and to be ready for change. It also prepares our code to depend on abstractions, which brings even more advantages.

If I'm writing a new class Swimmer to add the functionality swim() and need to use an object of class say Dog, and this Dog class implements interface Animal which declares swim().
At the top of the hierarchy (Animal), it's very abstract while at the bottom (Dog) it's very concrete. The way I think about "programming to interfaces" is that, as I write Swimmer class, I want to write my code against the interface that's as far up that hierarchy which in this case is an Animal object. An interface is free from implementation details and thus makes your code loosely-coupled.
The implementation details can be changed with time, however, it would not affect the remaining code since all you are interacting with is with the interface and not the implementation. You don't care what the implementation is like... all you know is that there will be a class that would implement the interface.

It is also good for Unit Testing, you can inject your own classes (that meet the requirements of the interface) into a class that depends on it

Short story: A postman is asked to go home after home and receive the covers contains (letters, documents, cheques, gift cards, application, love letter) with the address written on it to deliver.
Suppose there is no cover and ask the postman to go home after home and receive all the things and deliver to other people, the postman can get confused.
So better wrap it with cover (in our story it is the interface) then he will do his job fine.
Now the postman's job is to receive and deliver the covers only (he wouldn't bothered what is inside in the cover).
Create a type of interface not actual type, but implement it with actual type.
To create to interface means your components get Fit into the rest of code easily
I give you an example.
you have the AirPlane interface as below.
interface Airplane{
parkPlane();
servicePlane();
}
Suppose you have methods in your Controller class of Planes like
parkPlane(Airplane plane)
and
servicePlane(Airplane plane)
implemented in your program. It will not BREAK your code.
I mean, it need not to change as long as it accepts arguments as AirPlane.
Because it will accept any Airplane despite actual type, flyer, highflyr, fighter, etc.
Also, in a collection:
List<Airplane> plane; // Will take all your planes.
The following example will clear your understanding.
You have a fighter plane that implements it, so
public class Fighter implements Airplane {
public void parkPlane(){
// Specific implementations for fighter plane to park
}
public void servicePlane(){
// Specific implementatoins for fighter plane to service.
}
}
The same thing for HighFlyer and other clasess:
public class HighFlyer implements Airplane {
public void parkPlane(){
// Specific implementations for HighFlyer plane to park
}
public void servicePlane(){
// specific implementatoins for HighFlyer plane to service.
}
}
Now think your controller classes using AirPlane several times,
Suppose your Controller class is ControlPlane like below,
public Class ControlPlane{
AirPlane plane;
// so much method with AirPlane reference are used here...
}
Here magic comes as you may make your new AirPlane type instances as many as you want and you are not changing the code of ControlPlane class.
You can add an instance...
JumboJetPlane // implementing AirPlane interface.
AirBus // implementing AirPlane interface.
You may remove instances of previously created types too.

So, just to get this right, the advantage of a interface is that I can separate the calling of a method from any particular class. Instead creating a instance of the interface, where the implementation is given from whichever class I choose that implements that interface. Thus allowing me to have many classes, which have similar but slightly different functionality and in some cases (the cases related to the intention of the interface) not care which object it is.
For example, I could have a movement interface. A method which makes something 'move' and any object (Person, Car, Cat) that implements the movement interface could be passed in and told to move. Without the method every knowing the type of class it is.

Imagine you have a product called 'Zebra' that can be extended by plugins. It finds the plugins by searching for DLLs in some directory. It loads all those DLLs and uses reflection to find any classes that implement IZebraPlugin, and then calls the methods of that interface to communicate with the plugins.
This makes it completely independent of any specific plugin class - it doesn't care what the classes are. It only cares that they fulfill the interface specification.
Interfaces are a way of defining points of extensibility like this. Code that talks to an interface is more loosely coupled - in fact it is not coupled at all to any other specific code. It can inter-operate with plugins written years later by people who have never met the original developer.
You could instead use a base class with virtual functions - all plugins would be derived from the base class. But this is much more limiting because a class can only have one base class, whereas it can implement any number of interfaces.

C++ explanation.
Think of an interface as your classes public methods.
You then could create a template that 'depends' on these public methods in order to carry out it's own function (it makes function calls defined in the classes public interface). Lets say this template is a container, like a Vector class, and the interface it depends on is a search algorithm.
Any algorithm class that defines the functions/interface Vector makes calls to will satisfy the 'contract' (as someone explained in the original reply). The algorithms don't even need to be of the same base class; the only requirement is that the functions/methods that the Vector depends on (interface) is defined in your algorithm.
The point of all of this is that you could supply any different search algorithm/class just as long as it supplied the interface that Vector depends on (bubble search, sequential search, quick search).
You might also want to design other containers (lists, queues) that would harness the same search algorithm as Vector by having them fulfill the interface/contract that your search algorithms depends on.
This saves time (OOP principle 'code reuse') as you are able to write an algorithm once instead of again and again and again specific to every new object you create without over-complicating the issue with an overgrown inheritance tree.
As for 'missing out' on how things operate; big-time (at least in C++), as this is how most of the Standard TEMPLATE Library's framework operates.
Of course when using inheritance and abstract classes the methodology of programming to an interface changes; but the principle is the same, your public functions/methods are your classes interface.
This is a huge topic and one of the the cornerstone principles of Design Patterns.

In Java these concrete classes all implement the CharSequence interface:
CharBuffer, String, StringBuffer, StringBuilder
These concrete classes do not have a common parent class other than Object, so there is nothing that relates them, other than the fact they each have something to do with arrays of characters, representing such, or manipulating such. For instance, the characters of String cannot be changed once a String object is instantiated, whereas the characters of StringBuffer or StringBuilder can be edited.
Yet each one of these classes is capable of suitably implementing the CharSequence interface methods:
char charAt(int index)
int length()
CharSequence subSequence(int start, int end)
String toString()
In some cases, Java class library classes that used to accept String have been revised to now accept the CharSequence interface. So if you have an instance of StringBuilder, instead of extracting a String object (which means instantiating a new object instance), it can instead just pass the StringBuilder itself as it implements the CharSequence interface.
The Appendable interface that some classes implement has much the same kind of benefit for any situation where characters can be appended to an instance of the underlying concrete class object instance. All of these concrete classes implement the Appendable interface:
BufferedWriter, CharArrayWriter, CharBuffer, FileWriter, FilterWriter, LogStream, OutputStreamWriter, PipedWriter, PrintStream, PrintWriter, StringBuffer, StringBuilder, StringWriter, Writer

Previous answers focus on programming to an abstraction for the sake of extensibility and loose coupling. While these are very important points,
readability is equally important. Readability allows others (and your future self) to understand the code with minimal effort. This is why readability leverages abstractions.
An abstraction is, by definition, simpler than its implementation. An abstraction omits detail in order to convey the essence or purpose of a thing, but nothing more.
Because abstractions are simpler, I can fit a lot more of them in my head at one time, compared to implementations.
As a programmer (in any language) I walk around with a general idea of a List in my head at all times. In particular, a List allows random access, duplicate elements, and maintains order. When I see a declaration like this: List myList = new ArrayList() I think, cool, this is a List that's being used in the (basic) way that I understand; and I don't have to think any more about it.
On the other hand, I do not carry around the specific implementation details of ArrayList in my head. So when I see, ArrayList myList = new ArrayList(). I think, uh-oh, this ArrayList must be used in a way that isn't covered by the List interface. Now I have to track down all the usages of this ArrayList to understand why, because otherwise I won't be able to fully understand this code. It gets even more confusing when I discover that 100% of the usages of this ArrayList do conform to the List interface. Then I'm left wondering... was there some code relying on ArrayList implementation details that got deleted? Was the programmer who instantiated it just incompetent? Is this application locked into that specific implementation in some way at runtime? A way that I don't understand?
I'm now confused and uncertain about this application, and all we're talking about is a simple List. What if this was a complex business object ignoring its interface? Then my knowledge of the business domain is insufficient to understand the purpose of the code.
So even when I need a List strictly within a private method (nothing that would break other applications if it changed, and I could easily find/replace every usage in my IDE) it still benefits readability to program to an abstraction. Because abstractions are simpler than implementation details. You could say that programming to abstractions is one way of adhering to the KISS principle.

An interface is like a contract, where you want your implementation class to implement methods written in the contract (interface). Since Java does not provide multiple inheritance, "programming to interface" is a good way to achieve multiple inheritance.
If you have a class A that is already extending some other class B, but you want that class A to also follow certain guidelines or implement a certain contract, then you can do so by the "programming to interface" strategy.

Q: - ... "Could you use any class that implements an interface?"
A: - Yes.
Q: - ... "When would you need to do that?"
A: - Each time you need a class(es) that implements interface(s).
Note: We couldn't instantiate an interface not implemented by a class - True.
Why?
Because the interface has only method prototypes, not definitions (just functions names, not their logic)
AnIntf anInst = new Aclass();
// we could do this only if Aclass implements AnIntf.
// anInst will have Aclass reference.
Note: Now we could understand what happened if Bclass and Cclass implemented same Dintf.
Dintf bInst = new Bclass();
// now we could call all Dintf functions implemented (defined) in Bclass.
Dintf cInst = new Cclass();
// now we could call all Dintf functions implemented (defined) in Cclass.
What we have: Same interface prototypes (functions names in interface), and call different implementations.
Bibliography:
Prototypes - wikipedia

program to an interface is a term from the GOF book. i would not directly say it has to do with java interface but rather real interfaces. to achieve clean layer separation, you need to create some separation between systems for example: Let's say you had a concrete database you want to use, you would never "program to the database" , instead you would "program to the storage interface". Likewise you would never "program to a Web Service" but rather you would program to a "client interface". this is so you can easily swap things out.
i find these rules help me:
1. we use a java interface when we have multiple types of an object. if i just have single object, i dont see the point. if there are at least two concrete implementations of some idea, then i would use a java interface.
2. if as i stated above, you want to bring decoupling from an external system (storage system) to your own system (local DB) then also use a interface.
notice how there are two ways to consider when to use them.

Coding to an interface is a philosophy, rather than specific language constructs or design patterns - it instructs you what is the correct order of steps to follow in order to create better software systems (e.g. more resilient, more testable, more scalable, more extendible, and other nice traits).
What it actually means is:
===
Before jumping to implementations and coding (the HOW) - think of the WHAT:
What black boxes should make up your system,
What is each box' responsibility,
What are the ways each "client" (that is, one of those other boxes, 3rd party "boxes", or even humans) should communicate with it (the API of each box).
After you figure the above, go ahead and implement those boxes (the HOW).
Thinking first of what a box' is and what its API, leads the developer to distil the box' responsibility, and to mark for himself and future developers the difference between what is its exposed details ("API") and it's hidden details ("implementation details"), which is a very important differentiation to have.
One immediate and easily noticeable gain is the team can then change and improve implementations without affecting the general architecture. It also makes the system MUCH more testable (it goes well with the TDD approach).
===
Beyond the traits I've mentioned above, you also save A LOT OF TIME going this direction.
Micro Services and DDD, when done right, are great examples of "Coding to an interface", however the concept wins in every pattern from monoliths to "serverless", from BE to FE, from OOP to functional, etc....
I strongly recommend this approach for Software Engineering (and I basically believe it makes total sense in other fields as well).

Program to an interface allows to change implementation of contract defined by interface seamlessly. It allows loose coupling between contract and specific implementations.
IInterface classRef = new ObjectWhatever()
You could use any class that implements IInterface? When would you need to do that?
Have a look at this SE question for good example.
Why should the interface for a Java class be preferred?
does using an Interface hit performance?
if so how much?
Yes. It will have slight performance overhead in sub-seconds. But if your application has requirement to change the implementation of interface dynamically, don't worry about performance impact.
how can you avoid it without having to maintain two bits of code?
Don't try to avoid multiple implementations of interface if your application need them. In absence of tight coupling of interface with one specific implementation, you may have to deploy the patch to change one implementation to other implementation.
One good use case: Implementation of Strategy pattern:
Real World Example of the Strategy Pattern

"Program to interface" means don't provide hard code right the way, meaning your code should be extended without breaking the previous functionality. Just extensions, not editing the previous code.

Also I see a lot of good and explanatory answers here, so I want to give my point of view here, including some extra information what I noticed when using this method.
Unit testing
For the last two years, I have written a hobby project and I did not write unit tests for it. After writing about 50K lines I found out it would be really necessary to write unit tests.
I did not use interfaces (or very sparingly) ... and when I made my first unit test, I found out it was complicated. Why?
Because I had to make a lot of class instances, used for input as class variables and/or parameters. So the tests look more like integration tests (having to make a complete 'framework' of classes since all was tied together).
Fear of interfaces
So I decided to use interfaces. My fear was that I had to implement all functionality everywhere (in all used classes) multiple times. In some way this is true, however, by using inheritance it can be reduced a lot.
Combination of interfaces and inheritance
I found out the combination is very good to be used. I give a very simple example.
public interface IPricable
{
int Price { get; }
}
public interface ICar : IPricable
public abstract class Article
{
public int Price { get { return ... } }
}
public class Car : Article, ICar
{
// Price does not need to be defined here
}
This way copying code is not necessary, while still having the benefit of using a car as interface (ICar).

Understanding Interfaces

I am still having trouble understanding what interfaces are good for. I read a few tutorials and I still don't know what they really are for other then "they make your classes keep promises" and "they help with multiple inheritance".
Thats about it. I still don't know when I would even use an interface in a real work example or even when to identify when to use it.
From my limited knowledge of interfaces they can help because if something implements it then you can just pass the interface in allowing to pass in like different classes without worrying about it not being the right parameter.
But I never know what the real point of this since they usually stop short at this point from showing what the code would do after it passes the interface and if they sort of do it it seems like they don't do anything useful that I could look at and go "wow they would help in a real world example".
So what I guess I am saying is I am trying to find a real world example where I can see interfaces in action.
I also don't understand that you can do like a reference to an object like this:
ICalculator myInterface = new JustSomeClass();
So now if I would go myInterface dot and intellisense would pull up I would only see the interface methods and not the other methods in JustSomeClass. So I don't see a point to this yet.
Also I started to do unit testing where they seem to love to use interfaces but I still don't understand why.
Like for instance this example:
public AuthenticationController(IFormsAuthentication formsAuth)
{
FormsAuth = formsAuth ?? new FormsAuthenticationWrapper();
}
public class FormsAuthenticationWrapper : IFormsAuthentication
{
public void SetAuthCookie(string userName, bool createPersistentCookie)
{
FormsAuthentication.SetAuthCookie(userName, createPersistentCookie);
}
public void SignOut()
{
FormsAuthentication.SignOut();
}
}
public IFormsAuthentication FormsAuth
{
get;
set;
}
Like why bother making this interface? Why not just make FormsAuthenticationWrapper with the methods in it and call it a day? Why First make an interface then have the Wrapper implement the interface and then finally write the methods?
Then I don't get what the statement is really saying.
Like I now know that the statement is saying this
FormsAuth = formsAuth ?? new FormsAuthenticationWrapper();
if formsAuth is null then make a new FormsAuthenticationWrapper and then assign it to the property that is an Interface.
I guess it goes back to the whole point of why the reference thing. Especially in this case since all the methods are exactly the same. The Wrapper does not have any new methods that the interface does not have and I am not sure but when you do this the methods are filled right(ie they have a body) they don't get converted to stubs because that would really seem pointless to me(it it would be converted back to an interface).
Then in the testing file they have:
var formsAuthenticationMock = new Mock<AuthenticationController.IFormsAuthentication>();
So they just pass in the FormsAuthentication what I am guessing makes all the fake stubs. I am guessing the wrapper class is used when the program is actually running since it has real methods that do something(like sign a person out).
But looking at new Mock(from moq) it accepts a class or an interface. Why not just again made the wrapper class put those methods in and then in the new Mock call that?
Would that not just make the stubs for you?

Ok, I had a hard time understanding too at first, so don't worry about it.
Think about this, if you have a class, that lets say is a video game character.
public class Character
{
}
Now say I want to have the Character have a weapon. I could use an interface to determin the methods required by a weapon:
interface IWeapon
{
public Use();
}
So lets give the Character a weapon:
public class Character
{
IWeapon weapon;
public void GiveWeapon(IWeapon weapon)
{
this.weapon = weapon;
}
public void UseWeapon()
{
weapon.Use();
}
}
Now we can create weapons that use the IWeapon interface and we can give them to any character class and that class can use the item.
public class Gun : IWeapon
{
public void Use()
{
Console.Writeline("Weapon Fired");
}
}
Then you can stick it together:
Character bob = new character();
Gun pistol = new Gun();
bob.GiveWeapon(pistol);
bob.UseWeapon();
Now this is a general example, but it gives a lot of power. You can read about this more if you look up the Strategy Pattern.

Interfaces define contracts.
In the example you provide, the ?? operator just provides a default value if you pass null to the constructor and doesn't really have anything to do with interfaces.
What is more relevant is that you might use an actual FormsAuthenticationWrapper object, but you can also implement your own IFormsAuthentication type that has nothing to do with the wrapper class at all. The interface tells you what methods and properties you need to implement to fulfill the contract, and allows the compiler to verify that your object really does honor that contract (to some extent - it's simple to honor a contract in name, but not in spirit), and so you don't have to use the pre-built FormsAuthenticationWrapper if you don't want to. You can build a different class that works completely differently but still honors the required contract.
In this respect interfaces are much like normal inheritance, with one important difference. In C# a class can only inherit from one type but can implement many interfaces. So interfaces allow you to fulfill multiple contracts in one class. An object can be an IFormsAuthentication object and also be something else, like IEnumerable.
Interfaces are even more useful when you look at it from the other direction: they allow you to treat many different types as if they were all the same. A good example of this is with the various collections classes. Take this code sample:
void OutputValues(string[] values)
{
foreach (string value in values)
{
Console.Writeline(value);
}
}
This accepts an array and outputs it to the console. Now apply this simple change to use an interface:
void OutputValues(IEnumerable<string> values)
{
foreach (string value in values)
{
Console.Writeline(value);
}
}
This code still takes an array and outputs it to the console. But it also takes a List<string> or anything else you care to give it that implements IEnumerable<string>. So we've taken an interface and used it to make a simple block of code much more powerful.
Another good example is the ASP.Net membership provider. You tell ASP.Net that you honor the membership contract by implementing the required interfaces. Now you can easily customize the built-in ASP.Net authentication to use any source, and all thanks to interfaces. The data providers in the System.Data namespace work in a similar fashion.
One final note: when I see an interface with a "default" wrapper implementation like that, I consider it a bit of an anit-pattern, or at least a code smell. It indicates to me that maybe the interface is too complicated, and you either need to split it apart or consider using some combination of composition + events + delegates rather than derivation to accomplish the same thing.

Perhaps the best way to get a good understanding of interfaces is to use an example from the .NET framework.
Consider the following function:
void printValues(IEnumerable sequence)
{
foreach (var value in sequence)
Console.WriteLine(value);
}
Now I could have written this function to accept a List<T>, object[], or any other type of concrete sequence. But since I have written this function to accept a parameter of type IEnumerable that means that I can pass any concrete type into this function that implements the IEnumerable interface.
The reason this is desirable is that by using the interface type your function is more flexible than it would otherwise be. Also you are increasing the utility of this function as many different callers will be able to make use of it without requiring modification.
By using an interface type you are able to declare the type of your parameter as a contract of what you need from whatever concrete type is passed in. In my example I don't care what type you pass me, I just care that I can iterate it.

All of the answers here have been helpful and I doubt I can add anything new to the mix but in reading the answers here, two of the concepts mentioned in two different answers really meshed well in my head so I will compose my understanding here in the hopes that it might help you.
A class has methods and properties and each of the methods and properties of a class has a signature and a body
public int Add(int x, int y)
{
return x + y;
}
The signature of the Add method is everything before the first curly brace character
public int Add(int x, int y)
The purpose of the method signature is to assign a name to a method and also to describe it's protection level (public, protected, internal, private and / or virtual) which defines where a method can be accessed from in code
The signature also defines the type of the value returned by the method, the Add method above returns an int, and the arguments a method expects to have passed to it by callers
Methods are generally considered to be something an object can do, the example above implies that the class the method is defined in works with numbers
The method body describes precisly (in code) how it is that an object performs the action described by the method name. In the example above the add method works by applying the addition operator to it's parameters and returing the result.
One of the primary differences between an interface and a class in terms of language syntax is that an interface can only define the signature of a methd, never the method body.
Put another way, an interface can describe in a the actions (methods) of a class, but it must never describe how an action is to be performed.
Now that you hopefully have a better understanding of what an interface is, we can move on to the second and third parts of your question when, and why would we use an interface in a real program.
One of the main times interfaces are used in a program is when one wants to perform an action, without wanting to know, or be tied to the specifics of how those actions are performed.
That is a very abstract concept to grapsp so perhaps an example might help to firm things up in your mind
Imagine you are the author of a very popular web browser that millions of people use every day and you have thousands of feature requests from people, some big, some little, some good and some like "bring back <maquee> and <blink> support".
Because you only have a relitivly small number of developers, and an even smaller number of hours in the day, you can't possibly implement every requested feature yourself, but you still want to satisfy your customers
So you decide to allow users to develop their own plugins, so they can <blink 'till the cows come home.
To implement this you might come up with a plugin class that looks like:
public class Plugin
{
public void Run (PluginHost browser)
{
//do stuff here....
}
}
But how could you reasonably implement that method? You can't possibly know precisly how every poossible future plugin is going to work
One possible way around this is to define Plugin as an interface and have the browser refer to each plugin using that, like this:
public interface IPlugin
{
void Run(PluginHost browser);
}
public class PluginHost
{
public void RunPlugins (IPlugin[] plugins)
{
foreach plugin in plugins
{
plugin.Run(this);
}
}
}
Note that as discussed earlier the IPlugin interface describes the Run method but does not specify how Run does it's job because this is specific to each plugin, we don't want the plugin host concerned with the specifics of each individual plugin.
To demonstrate the "can-be-a" aspect of the relationship between a class and an interface I will write a plugin for the plugin host below that implements the <blink> tag.
public class BlinkPlugin: IPlugin
{
private void MakeTextBlink(string text)
{
//code to make text blink.
}
public void Run(PluginHost browser)
{
MakeTextBlink(browser.CurrentPage.ParsedHtml);
}
}
From this perspective you can see that the plugin is defined in a class named BlinkPlugin but because it also implements the IPlugin interface it can also be refered to as an IPlugin object,as the PluginHost class above does, because it doesn't know or care what type the class actually is, just that it can be an IPlugin
I hope this has helped, I really didnt intend it to be quite this long.

I'll give you an example below but let me start with one of your statements. "I don't know how to identify when to use one". to put it on edge. You don't need to identify when to use it but when not to use it. Any parameter (at least to public methods), any (public) property (and personally I would actually extend the list to and anything else) should be declared as something of an interface not a specific class. The only time I would ever declare something of a specific type would be when there was no suitable interface.
I'd go
IEnumerable<T> sequence;
when ever I can and hardly ever (the only case I can think off is if I really needed the ForEach method)
List<T> sequence;
and now an example. Let's say you are building a sytem that can compare prices on cars and computers. Each is displayed in a list.
The car prices are datamined from a set of websites and the computer prices from a set of services.
a solution could be:
create one web page, say with a datagrid and Dependency Injection of a IDataRetriever
(where IDataRetriver is some interface making data fetching available with out you having to know where the data came from (DB,XML,web services or ...) or how they were fetched (data mined, SQL Quering in house data or read from file).
Since the two scenarios we have have nothing but the usage in common a super class will make little sense. but the page using our two classes (one for cars and one for computers) needs to perform the exact same operations in both cases to make that possible we need to tell the page (compiler) which operations are possible. We do that by means of an interface and then the two classes implement that interfcae.
using dependency injection has nothing to do with when or how to use interfaces but the reason why I included it is another common scenario where interfaces makes you life easier. Testing. if you use injection and interfaces you can easily substitute a production class for a testing class when testing. (This again could be to switch data stores or to enforce an error that might be very hard to produce in release code, say a race condition)

We use interfaces (or abstract base classes) to allow polymorphism, which is a very central concept in object-oriented programming. It allows us to compose behavior in very flexible ways. If you haven't already, you should read Design Patterns - it contains numerous examples of using interfaces.
In relation to Test Doubles (such as Mock objects), we use interfaces to be able to remove functionality that we currently don't want to test, or that can't work from within a unit testing framework.
Particularly when working with web development, a lot of the services that we rely on (such as the HTTP Context) isn't available when the code executes outside of the web context, but if we hide that functionality behind an interface, we can replace it with something else during testing.

The way I understood it was:
Derivation is 'is-a' relationship e.g., A Dog is an Animal, A Cow is an Animal but an interface is never derived, it is implemented.
So, interface is a 'can-be' relationship e.g., A Dog can be a Spy Dog, A Dog can be a Circus Dog etc. But to achieve this, a dog has to learn some specific things. Which in OO terminology means that your class has to able to do some specific things (contract as they call it) if it implements an interface. e.g., if your class implements IEnumerable, it clearly means that your class has (must have) such a functionality that it's objects can be Enumerated.
So, in essence, through Interface Implementation a Class exposes a functionality to its users that it can do something and it is NOT inheritance.

With almost everything written about interfaces, let me have a shot.
In simple terms, interface is something which will relate two or more , otherwise, non related classes.
Interfaces define contract which ensures that any two or more classes, even if not completely related, happens to implement a common interface, will contain a common set of operations.
Combined with the support of polymorphism , one can use interfaces to write cleaner and dynamic code.
eg.
Interface livingBeings
-- speak() // says anybody who IS a livingBeing need to define how they speak
class dog implements livingBeings
--speak(){bark;} // implementation of speak as a dog
class bird implements livingBeings
--speak(){chirp;}// implementation of speak as a bird

ICalculator myInterface = new JustSomeClass();
JustSomeClass myObject = (JustSomeClass) myInterface;
Now you have both "interfaces" to work with on the object.
I am pretty new to this too, but I like to think of interfaces as buttons on a remote control. When using the ICalculator interface, you only have access to the buttons (functionality) intended by the interface designer. When using the JustSomeClass object reference, you have another set of buttons. But they both point to the same object.
There are many reasons to do this. The one that has been most useful to me is communication between co-workers. If they can agree on an interface (buttons which will be pushed), then one developer can work on implementing the button's functionality and another can write code that uses the buttons.
Hope this helps.

How does this "Programming to Interfaces" thing work?

I like the idea of "programming to interfaces" and avoiding the use of the "new" keyword.
However, what do I do when I have two classes that have the same interface but are fundamentally different to set up. Without going into detail about my specific code, I have an interface with a method, "DoStuff". Two classes implement this interface. One is very simple and requires no initialisation to speak of. The other has five different variables that need to be set up. When combined, they allow for literally millions of ways for the class to work when DoStuff is called.
So when do I "new" these classes? I though about using factories but I don't think they are suitable in this case because of the vast difference in setup. (BTW: there are actually about ten different classes using the interface, each allowing the formation of part of a complex pipeline and each with different configuration requirements).

I think you may be misunderstanding the concept of programming to interfaces. You always have to use the new keyword in object oriented languages to create new instances of objects. Just because you program to interfaces doesn't remove that requirement.
Programming to an interface simply means that all your concrete classes have their behavior defined in an interface instead of in the concrete class itself. So when you define the type of a variable, you define it to be the interface instead of a concrete type.
In your case, just implement DoStuff in your concrete classes as each class needs it implemented (whether doing it simply or with 10 other initialized objects and setup). For example, if you have an interface IInterface and class SomeClass which implements IInterface. You might declare an instance of SomeClass as such:
IInterface myInstance = new SomeClass();
This allows you to pass this instance around to other functions without having to have those functions worry about the implementation details of that instance's class.

Well you really have 3 options. Use new, use a factory or use an DI container. With a DI container your five variables would most likely need to be in a configuration file of some sorts.
But to be completely honest it sounds like you're making your life harder than it needs to be by forcing yourself into a corner. Instead of coding to some ideal, rather code in a manner which best facilitates solving the problem at hand. Not saying you should do a hack job of it, but really, saying you don't want to use new, that is really making your life harder than it needs to be...

Regardless of what you use, at some point you're going to have to construct instances of your classes in order to use them, there's no way around that.
How to go about doing that depends on what you want to accomplish, and the semantics of those classes.
Take the class you mention with those fields.
Can those fields be read from somewhere? A configuration file, as an example? If so, perhaps all you need is just a default constructor that initializes those fields from such a configuration file.
However, if the content of those fields really needs to be passed in from the outside world, there's no way around that.
Perhaps you should look at a IoC container and Dependency Injection?

If you are passing that many configuration parameters into your class it may have too many responsibilities. You should look into breaking it up into smaller classes that only have a single responsibility.
Avoiding the new keyword can be valuable because it creates a dependancy on the implementing class. A better solution would be to use Dependancy Injection.
for example
public interface IDoStuff
{
void DoStuff();
}
public class DoStuffService
{
private IDoStuff doer;
public DoStuffService()
{
//Class is now dependant on DoLotsOfStuff
doer = new DoLotsOfStuff(1,true, "config string");
}
}
public class DoStuffBetterService
{
private IDoStuff doer;
//inject dependancy - no longer dependant on DoLotsOfStuff
public DoStuffBetterService(IDoStuff doer)
{
this.doer = doer;
}
}
Obviously you still have to create the IDoStuff object being passed in somewhere.
An Inversion of Control (IoC) container is a good tool to help with implementing this.
Here is a good tutorial for Castle Windsor Container if you are interested in learning more. (There are many other IoC containers, I just happen to use this one.)
The example in your question was very abstract, so I hope this answer is helpful.

If I understand you correctly the problem is with different initialization. You need to provide for two classes that have the same interface. One does not need anything, and the other needs some paramaters and calls some complex initialization.
You should use have a constructor that gets InitializationParameter. Both classes should get it. One with a simple interface that does not need to get anything from it. The other that needs params and will get them from it.
If you are concerned about initialization you can use factory, just ask it for some interface providing this init parameter and factory will create, init and return to you the object according to the values you provided.
If something is not clear - please ask.

When to use Factory method pattern?

When to use Factory method pattern?
Please provide me some specific idea when to use it in project?
and how it is a better way over new keyword?

Use a factory method (not abstract factory) when you want to reuse common functionality with different components.
Example: Imagine you have an M16 rifle. Something like this:
public class M16
{
private Scope scope = new StandardScope();
private SecondaryWeapon secondary = new Bayonet();
private Camouflage camo = new DesertCamo();
public double getMass()
{
// Add the mass of the gun to the mass of all the attachments.
}
public Point2D shootAtTarget(Point2D targetPosition)
{
// Very complicated calculation taking account of lots of variables such as
// scope accuracy and gun weight.
}
}
You may be satisfied with it for a while, thinking that you wont want to change anything. But then you have to do a secret nightime stealth mission in the jungle, and you realise that your attachments are completely inappropriate. You really need a NightVision scope, JungleCamo and a GrenadeLauncher secondary weapon. You will have to copy past the code from your original M16......not good extensibility.....Factory Method to the rescue!
Rewrite your M16 class:
public abstract class M16
{
private Scope scope = getScope();
private SecondaryWeapon secondary = getSecondaryWeapon();
private Camouflage camo = getCamouflage();
public double getMass()
{
// Add the mass of the gun to the mass of all the attachments.
}
public Point2D shootAtTarget(Point2D targetPosition)
{
// Very complicated calculation taking account of lots of variables such as
// scope accuracy and gun weight.
}
// Don't have to be abstract if you want to have defaults.
protected abstract Scope getScope();
protected abstract SecondaryWeapon getSecondaryWeapon();
protected abstract Camouflage getCamouflage();
}
//Then, your new JungleM16 can be created with hardly any effort (and importantly, no code //copying):
public class JungleM16 : M16
{
public Scope getScope()
{
return new NightVisionScope();
}
public SecondaryWeapon getSecondaryWeapon()
{
return new GrenadeLauncher();
}
public Camouflage getCamouflage()
{
return new JungleCamo();
}
}
Main idea? Customise and swap out composing objects while keeping common functionality.
An actually useful place to use it:
You have just designed a really cool GUI, and it has a really complicated layout. It would be a real pain to have to layout everything again if you wanted to have different widgets. So.....use a factory method to create the widgets. Then, if you change your mind (or someone else want to use your class, but use different components) you can just subclass the GUI and override the factory methods.

I have two cases where I tend to use it:
The object needs to be initialized in some specific manner
When I want to construct a specific type based on an abstract type (an abstract class or an interface).
Examples:
First case could be that you want to have a factory creating SqlCommand objects, where you automatically attach a valid SqlConnection before returning the command object.
Second case is if you have an interface defined and determine at execution time which exact implementation of the interface to use (for instance by specifying it in a configuration file).

You can refer to section 9.5 Factories from Framework Design Guidelines 2nd Edition. Here is quoted set of guidelines with respect to using factories over constructors:
DO prefer constructors to
factories, because they are
generally more usable, consistent,
and convenient than specialized
construction mechanisms.
CONSIDER using a factory if you need
more control than can be provided by
constructors over the creation of the
instances.
DO use a factory in cases where a
developer might not know which type
to construct, such as when coding
against a base type or interface.
CONSIDER using a factory if having a
named method is the only way to make
the operation self-explanatory.
DO use a factory for conversion-style
operations.
And from section 5.3 Constructor Design
CONSIDER using a static factory method instead of a constructor if the
semantics of the desired operation do not map directly to the construc-
tion of a new instance, or if following the constructor design guidelines
feels unnatural.

Although this isn't necessarily it's primary use, it's good for something where you have specialized instances of a class:
public ITax BuildNewSalesTax()
public ITax BuildNewValueAddedTax()
You need both methods to build a tax object, but you don't want to have to depend on using "new" everytime because the constructors may be complex. This way I encapsulate all of the changes into a single method that is clear to others for future maintenance.

I am using Factory pattens when
When a class does not know which class of objects it must create.
A class specifies its sub-classes to specify which objects to create.
In programmer’s language (very raw form), you can use factory pattern where you have to create an object of any one of sub-classes depending on the data provided.

Factory method pattern can be used when there is a need to generate objects that belong to specific family. Along side this requirement, you also want to keep the decisions made regarding object instantiation in one place.
Please refer the following link for more details.
http://xeon2k.wordpress.com/2010/11/27/factory-method-pattern/

Use the Abstract Factory pattern when
a system should be independent of how its products are created, composed, and represented.
a system should be configured with one of multiple families of products.
a family of related product objects is designed to be used together, and you need to enforce this constraint.
you want to provide a class library of products, and you want to reveal just their interfaces, not their implementations.

It's better to have a factory method pattern vs new keyword. The idea is to move complete instantiation of objects outside the business logic. This principle is the crux of dependency injection. And, the work of the factory method can be delegated to a Dependency Injection Framework like Spring.net or Castle Windsor at a later point.

To answer the second part of you question from my opinion, I think the reason it's better than the 'new' keyword is that the factory method reduces the dependancy on constructors of particular classes. By using a factory method, you delegate the creation of the object in question to someone else, so the caller doesn't need teh knowledge of how to create the object.

I think its when you want your application to be loosely coupled and extensible in future without coding changes.
I have written a post on blog as to why i choose the factory pattern in my project and may be it can give you more insight. The example is in PHP but i think its applicable in general to all languages.
http://www.mixedwaves.com/2009/02/implementing-factory-design-pattern/