Develop Reference

C# check if ip address matches adapter ip address settings

I'm totally out of C# hence hanging a little here. I stole the code from https://stackoverflow.com/a/13175574 to read out all adapter settings available on the pc. So far so good.
What I need now is a way to check, which of the adapters are able to connect to an attached device with a given ip address.
I'd like to have a function like "bool CheckIfValidIP(IPAddress adapter, IPAddress IPv4Mask, IPAddress address)".
Can you help me here? I know it's pretty trivial :-/
Edit:
public static class IPAddressExtensions
{
public static IPAddress GetNetworkAddress(this IPAddress address, IPAddress subnetMask)
{
byte[] ipAdressBytes = address.GetAddressBytes();
byte[] subnetMaskBytes = subnetMask.GetAddressBytes();
if (ipAdressBytes.Length != subnetMaskBytes.Length)
throw new ArgumentException("Lengths of IP address and subnet mask do not match.");
byte[] broadcastAddress = new byte[ipAdressBytes.Length];
for (int i = 0; i < broadcastAddress.Length; i++)
{
broadcastAddress[i] = (byte)(ipAdressBytes[i] & (subnetMaskBytes[i]));
}
return new IPAddress(broadcastAddress);
}
public static bool IsInSameSubnet(IPAddress address2, IPAddress address, IPAddress subnetMask)
{
IPAddress network1 = address.GetNetworkAddress(subnetMask);
IPAddress network2 = address2.GetNetworkAddress(subnetMask);
return network1.Equals(network2);
}
}
This code shall do it. Is it safe to use?

A very simple example to get you in the right direction, this is created in .Net core 6:
using System.Net.NetworkInformation;
using System.Net.Sockets;
NetworkInterface[] interfaces = NetworkInterface.GetAllNetworkInterfaces();
var adaptertList = new List<NetworkInterface>();
const string IpAddressToValidate = "192.168.1.1"; //Both of these values can be retrieved from appsetting.json file
const string IpV4MaskToValidate = "255.255.255.0";
adaptertList = GetValidAdapterList(interfaces);
List<NetworkInterface> GetValidAdapterList(NetworkInterface[] interfaces) {
var adaptertList = new List<NetworkInterface>();
foreach (var adapter in interfaces) {
var ipProps = adapter.GetIPProperties();
foreach (var ip in ipProps.UnicastAddresses) {
if ((adapter.OperationalStatus == OperationalStatus.Up)//Check for any conditions appropriate to your case
&& (ip.Address.AddressFamily == AddressFamily.InterNetwork)) {
if (CheckIsValidIP(ip.Address.ToString(), ip.IPv4Mask.ToString(), IpAddressToValidate, IpV4MaskToValidate)) {
adaptertList.Add(adapter);
continue;//If IP found exit the loop, as the adapter is already added
}
}
}
}
return adaptertList;
}
bool CheckIsValidIP(string ipAddress, string ipV4Mask, string validIpAddress, string validIpV4Mask) {
return (ipAddress == validIpAddress && ipV4Mask == validIpV4Mask);
}
This code will return a list of all the adapter in the machine that meet the Ip address and ipv4mask criteria.

Retrieve IP address of device

I am using Xamarin.Android and wrote the following code:
public TextView text;
text = FindViewById<TextView>(Resource.Id.viewIP);
foreach (IPAddress adress in Dns.GetHostAddresses(Dns.GetHostName()))
{
text.Text = "IP Adress: " + adress;
}
However, when I open the application it shuts down immediately. Am I using the correct way of getting the IP address' of the device?

From the Xamarin forums
Java.Util.IEnumeration networkInterfaces = NetworkInterface.NetworkInterfaces;
while(networkInterfaces.HasMoreElements)
{
Java.Net.NetworkInterface netInterface =
(Java.Net.NetworkInterface)networkInterfaces.NextElement();
Console.WriteLine(netInterface.ToString());
}

added to mainifest:
<uses-permission android:name="android.permission.ACCESS_WIFI_STATE" />
<uses-permission android:name="android.permission.INTERNET" />
for get local ip:
public static string GetLocalIPAddress()
{
var host = Dns.GetHostEntry(Dns.GetHostName());
foreach (var ip in host.AddressList)
{
if (ip.AddressFamily == AddressFamily.InterNetwork)
{
return ip.ToString();
}
}
throw new Exception("Local IP Address Not Found!");
}
See this answer : https://stackoverflow.com/a/6803109/4349342

For me this worked in PCL Xamarin:
public static string GetIPAddress()
{
var AllNetworkInterfaces = Collections.List(Java.Net.NetworkInterface.NetworkInterfaces);
var IPAddres = "";
foreach (var interfaces in AllNetworkInterfaces)
{
if (!(interfaces as Java.Net.NetworkInterface).Name.Contains("eth0")) continue;
var AddressInterface = (interfaces as Java.Net.NetworkInterface).InterfaceAddresses;
foreach (var AInterface in AddressInterface)
{
if(AInterface.Broadcast != null)
IPAddres = AInterface.Address.HostAddress;
}
}
return IPAddres;
}

All the answers I've seen to this question have only gotten the internal IP address of my device while on my home network (198.162.#.#). So I took a slightly different approach, and ask the internet more directly. ipify.org has a nice and simple endpoint for getting your IP address, that can be executed in your shared code. For example...
var client = new HttpClient();
var response = await client.GetAsync("https://api.ipify.org/?format=json");
var resultString = await response.Content.ReadAsStringAsync();
var result = JsonConvert.DeserializeObject<IpResult>(resultString);
var yourIp = result.Ip;
Where "IpResult" is a POCO with a single string property named "Ip" (that you need to create, in addition to this code.)

How to get the public IP address of a user in C#

I want the public IP address of the client who is using my website.
The code below is showing the local IP in the LAN, but I want the public IP of the client.
//get mac address
NetworkInterface[] nics = NetworkInterface.GetAllNetworkInterfaces();
String sMacAddress = string.Empty;
foreach (NetworkInterface adapter in nics)
{
if (sMacAddress == String.Empty)// only return MAC Address from first card
{
IPInterfaceProperties properties = adapter.GetIPProperties();
sMacAddress = adapter.GetPhysicalAddress().ToString();
}
}
// To Get IP Address
string IPHost = Dns.GetHostName();
string IP = Dns.GetHostByName(IPHost).AddressList[0].ToString();
Output:
Ip Address : 192.168.1.7
Please help me to get the public IP address.

This is what I use:
protected void GetUser_IP()
{
string VisitorsIPAddr = string.Empty;
if (HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"] != null)
{
VisitorsIPAddr = HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"].ToString();
}
else if (HttpContext.Current.Request.UserHostAddress.Length != 0)
{
VisitorsIPAddr = HttpContext.Current.Request.UserHostAddress;
}
uip.Text = "Your IP is: " + VisitorsIPAddr;
}
"uip" is the name of the label in the aspx page that shows the user IP.

You can use "HTTP_X_FORWARDED_FOR" or "REMOTE_ADDR" header attribute.
Refer method GetVisitorIPAddress from Machine Syntax blog .
/// <summary>
/// method to get Client ip address
/// </summary>
/// <param name="GetLan"> set to true if want to get local(LAN) Connected ip address</param>
/// <returns></returns>
public static string GetVisitorIPAddress(bool GetLan = false)
{
string visitorIPAddress = HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if (String.IsNullOrEmpty(visitorIPAddress))
visitorIPAddress = HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"];
if (string.IsNullOrEmpty(visitorIPAddress))
visitorIPAddress = HttpContext.Current.Request.UserHostAddress;
if (string.IsNullOrEmpty(visitorIPAddress) || visitorIPAddress.Trim() == "::1")
{
GetLan = true;
visitorIPAddress = string.Empty;
}
if (GetLan && string.IsNullOrEmpty(visitorIPAddress))
{
//This is for Local(LAN) Connected ID Address
string stringHostName = Dns.GetHostName();
//Get Ip Host Entry
IPHostEntry ipHostEntries = Dns.GetHostEntry(stringHostName);
//Get Ip Address From The Ip Host Entry Address List
IPAddress[] arrIpAddress = ipHostEntries.AddressList;
try
{
visitorIPAddress = arrIpAddress[arrIpAddress.Length - 2].ToString();
}
catch
{
try
{
visitorIPAddress = arrIpAddress[0].ToString();
}
catch
{
try
{
arrIpAddress = Dns.GetHostAddresses(stringHostName);
visitorIPAddress = arrIpAddress[0].ToString();
}
catch
{
visitorIPAddress = "127.0.0.1";
}
}
}
}
return visitorIPAddress;
}

Combination of all of these suggestions, and the reasons behind them. Feel free to add more test cases too. If getting the client IP is of utmost importance, than you might wan to get all of theses are run some comparisons on which result might be more accurate.
Simple check of all suggestions in this thread plus some of my own code...
using System.IO;
using System.Net;
public string GetUserIP()
{
string strIP = String.Empty;
HttpRequest httpReq = HttpContext.Current.Request;
//test for non-standard proxy server designations of client's IP
if (httpReq.ServerVariables["HTTP_CLIENT_IP"] != null)
{
strIP = httpReq.ServerVariables["HTTP_CLIENT_IP"].ToString();
}
else if (httpReq.ServerVariables["HTTP_X_FORWARDED_FOR"] != null)
{
strIP = httpReq.ServerVariables["HTTP_X_FORWARDED_FOR"].ToString();
}
//test for host address reported by the server
else if
(
//if exists
(httpReq.UserHostAddress.Length != 0)
&&
//and if not localhost IPV6 or localhost name
((httpReq.UserHostAddress != "::1") || (httpReq.UserHostAddress != "localhost"))
)
{
strIP = httpReq.UserHostAddress;
}
//finally, if all else fails, get the IP from a web scrape of another server
else
{
WebRequest request = WebRequest.Create("http://checkip.dyndns.org/");
using (WebResponse response = request.GetResponse())
using (StreamReader sr = new StreamReader(response.GetResponseStream()))
{
strIP = sr.ReadToEnd();
}
//scrape ip from the html
int i1 = strIP.IndexOf("Address: ") + 9;
int i2 = strIP.LastIndexOf("</body>");
strIP = strIP.Substring(i1, i2 - i1);
}
return strIP;
}

That code gets you the IP address of your server not the address of the client who is accessing your website. Use the HttpContext.Current.Request.UserHostAddress property to the client's IP address.

For Web Applications ( ASP.NET MVC and WebForm )
/// <summary>
/// Get current user ip address.
/// </summary>
/// <returns>The IP Address</returns>
public static string GetUserIPAddress()
{
var context = System.Web.HttpContext.Current;
string ip = String.Empty;
if (context.Request.ServerVariables["HTTP_X_FORWARDED_FOR"] != null)
ip = context.Request.ServerVariables["HTTP_X_FORWARDED_FOR"].ToString();
else if (!String.IsNullOrWhiteSpace(context.Request.UserHostAddress))
ip = context.Request.UserHostAddress;
if (ip == "::1")
ip = "127.0.0.1";
return ip;
}
For Windows Applications ( Windows Form, Console, Windows Service , ... )
static void Main(string[] args)
{
HTTPGet req = new HTTPGet();
req.Request("http://checkip.dyndns.org");
string[] a = req.ResponseBody.Split(':');
string a2 = a[1].Substring(1);
string[] a3=a2.Split('<');
string a4 = a3[0];
Console.WriteLine(a4);
Console.ReadLine();
}

So many of these code snippets are really big and could confuse new programmers looking for help.
How about this simple and compact code to fetch the IP address of the visitor?
string ip = System.Web.HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if (string.IsNullOrEmpty(ip))
{
ip = System.Web.HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"];
}
Simple, short and compact.

I have an extension method:
public static string GetIp(this HttpContextBase context)
{
if (context == null || context.Request == null)
return string.Empty;
return context.Request.ServerVariables["HTTP_X_FORWARDED_FOR"]
?? context.Request.UserHostAddress;
}
Note: "HTTP_X_FORWARDED_FOR" is for ip behind proxy. context.Request.UserHostAddress is identical to "REMOTE_ADDR".
But bear in mind it is not necessary the actual IP though.
Sources:
IIS Server Variables
Link

My version handles both ASP.NET or LAN IPs:
/**
* Get visitor's ip address.
*/
public static string GetVisitorIp() {
string ip = null;
if (HttpContext.Current != null) { // ASP.NET
ip = string.IsNullOrEmpty(HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"])
? HttpContext.Current.Request.UserHostAddress
: HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
}
if (string.IsNullOrEmpty(ip) || ip.Trim() == "::1") { // still can't decide or is LAN
var lan = Dns.GetHostEntry(Dns.GetHostName()).AddressList.FirstOrDefault(r => r.AddressFamily == AddressFamily.InterNetwork);
ip = lan == null ? string.Empty : lan.ToString();
}
return ip;
}

private string GetClientIpaddress()
{
string ipAddress = string.Empty;
ipAddress = HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if (ipAddress == "" || ipAddress == null)
{
ipAddress = HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"];
return ipAddress;
}
else
{
return ipAddress;
}
}

On MVC 5 you can use this:
string cIpAddress = Request.UserHostAddress; //Gets the client ip address
or
string cIpAddress = Request.ServerVariables["REMOTE_ADDR"]; //Gets the client ip address

In MVC IP can be obtained by the following Code
string ipAddress = Request.ServerVariables["REMOTE_ADDR"];

string IP = HttpContext.Current.Request.Params["HTTP_CLIENT_IP"] ?? HttpContext.Current.Request.UserHostAddress;

just use this..................
public string GetIP()
{
string externalIP = "";
externalIP = (new WebClient()).DownloadString("http://checkip.dyndns.org/");
externalIP = (new Regex(#"\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}")).Matches(externalIP)[0].ToString();
return externalIP;
}

We connect to servers that give us our external IP address and try to parse the IP from returning HTML pages. But when servers make small changes on these pages or remove them, these methods stop working properly.
Here is a method that takes the external IP address using a server which has been alive for years and returns a simple response rapidly...
https://www.codeproject.com/Tips/452024/Getting-the-External-IP-Address
Private string getExternalIp()
{
try
{
string externalIP;
externalIP = (new
WebClient()).DownloadString("http://checkip.dyndns.org/");
externalIP = (new Regex(#"\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}"))
.Matches(externalIP)[0].ToString();
return externalIP;
}
catch { return null; }
}
VB.NET
Imports System.Net
Private Function GetExternalIp() As String
Try
Dim ExternalIP As String
ExternalIP = (New WebClient()).DownloadString("http://checkip.dyndns.org/")
ExternalIP = (New Regex("\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}")) _
.Matches(ExternalIP)(0).ToString()
Return ExternalIP
Catch
Return Nothing
End Try
End Function

lblmessage.Text =Request.ServerVariables["REMOTE_HOST"].ToString();

You can download xNet at: https://drive.google.com/open?id=1fmUosINo8hnDWY6s4IV4rDnHKLizX-Hq
First, you need import xNet, code:
using xNet;
Code:
void LoadpublicIP()
{
HttpRequest httprequest = new HttpRequest();
String HTML5 = httprequest.Get("https://whoer.net/").ToString();
MatchCollection collect = Regex.Matches(HTML5, #"<strong data-clipboard-target="".your-ip(.*?)</strong>", RegexOptions.Singleline);
foreach (Match match in collect)
{
var val = Regex.Matches(match.Value, #"(?<ip>(\d|\.)+)");
foreach (Match m in val)
{
richTextBox1.Text = m.Groups[2].Value;
}
}
}

How to get IP of all hosts in LAN?

I need to list IP addresses of all connected hosts in my LAN.
What is the simplest way to do this?

You'll have to do a ping sweep. There's a Ping class in the System.Net namespace. Example follows. Also this is only possible if your computers don't have firewalls running. If they've got a firewall enabled, there's no way to determine this information short of doing SNMP queries on your switches.
System.Net.NetworkInformation.Ping p = new System.Net.NetworkInformation.Ping();
System.Net.NetworkInformation.PingReply rep = p.Send("192.168.1.1");
if (rep.Status == System.Net.NetworkInformation.IPStatus.Success)
{
//host is active
}
The other issue is to determine how large your network is. In most home situations, your network mask will be 24 bits. This means that its set to 255.255.255.0. If your gateway is 192.168.1.1, this means that valid addresses on your network will be 192.168.1.1 to 192.168.1.254. Here's an IP Calculator to help. You'll have to loop through each address and ping the address using the Ping class and check the PingReply.
If you're just looking for the information and aren't concerned with how you get it, you can use NMap. The command would be as follows
nmap -sP 192.168.1.0/24
EDIT:
As far as speed goes, since you're on a local network, you can cut down the timeout interval considerably as your machines shouldn't take more than 100 milliseconds to reply. You can also use SendAsync to ping them all in parallel. The following program will ping 254 address in under half a second.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Net.NetworkInformation;
using System.Diagnostics;
using System.Net;
using System.Threading;
using System.Net.Sockets;
namespace ConsoleApplication1
{
class Program
{
static CountdownEvent countdown;
static int upCount = 0;
static object lockObj = new object();
const bool resolveNames = true;
static void Main(string[] args)
{
countdown = new CountdownEvent(1);
Stopwatch sw = new Stopwatch();
sw.Start();
string ipBase = "10.22.4.";
for (int i = 1; i < 255; i++)
{
string ip = ipBase + i.ToString();
Ping p = new Ping();
p.PingCompleted += new PingCompletedEventHandler(p_PingCompleted);
countdown.AddCount();
p.SendAsync(ip, 100, ip);
}
countdown.Signal();
countdown.Wait();
sw.Stop();
TimeSpan span = new TimeSpan(sw.ElapsedTicks);
Console.WriteLine("Took {0} milliseconds. {1} hosts active.", sw.ElapsedMilliseconds, upCount);
Console.ReadLine();
}
static void p_PingCompleted(object sender, PingCompletedEventArgs e)
{
string ip = (string)e.UserState;
if (e.Reply != null && e.Reply.Status == IPStatus.Success)
{
if (resolveNames)
{
string name;
try
{
IPHostEntry hostEntry = Dns.GetHostEntry(ip);
name = hostEntry.HostName;
}
catch (SocketException ex)
{
name = "?";
}
Console.WriteLine("{0} ({1}) is up: ({2} ms)", ip, name, e.Reply.RoundtripTime);
}
else
{
Console.WriteLine("{0} is up: ({1} ms)", ip, e.Reply.RoundtripTime);
}
lock(lockObj)
{
upCount++;
}
}
else if (e.Reply == null)
{
Console.WriteLine("Pinging {0} failed. (Null Reply object?)", ip);
}
countdown.Signal();
}
}
}
EDIT: After some use of it myself, I modified the program to output a count of how many IPs responded. There's a const bool that if set to true, will cause the program resolve the host names of the IPs. This significantly slows down the scan, though. (under half a second to 16 seconds) Also found that if the IP address is incorrectly specified (made a typo myself), the reply object can be null, so I handled that.

You would need to build an address range (e.g. 192.168.0.1 - 192.168.255.254) and ping each of those addresses. If a response is received, then that host is active.
Asynchronous Ping Tutorial:
http://www.geekpedia.com/tutorial234_Asynchronous-Ping-using-Csharp.html
However, some newer operating systems block ping requests (ICMP). This would need to be disabled in the firewall on each computer for you to receive a response.

You can do it all in managed code. I do it using System.DirectoryServices and System.Net. Basically I get the names of the local computers from DirectoryServices (handling domains and workgroups as I go) then get each host's IP addresses from System.Net.Dns. Here's everything packed into a handy class...
public class NetworkComputer {
private string _domain;
private string _name;
private IPAddress[] _addresses = null;
public string Domain { get { return _domain; } }
public string Name { get { return _name; } }
public IPAddress[] Addresses { get { return _addresses; } }
private NetworkComputer(string domain, string name) {
_domain = domain;
_name = name;
try { _addresses = Dns.GetHostAddresses(name); } catch { }
}
public static NetworkComputer[] GetLocalNetwork() {
var list = new List<NetworkComputer>();
using(var root = new DirectoryEntry("WinNT:")) {
foreach(var _ in root.Children.OfType<DirectoryEntry>()) {
switch(_.SchemaClassName) {
case "Computer":
list.Add(new NetworkComputer("", _.Name));
break;
case "Domain":
list.AddRange(_.Children.OfType<DirectoryEntry>().Where(__ => (__.SchemaClassName == "Computer")).Select(__ => new NetworkComputer(_.Name, __.Name)));
break;
}
}
}
return list.OrderBy(_ => _.Domain).ThenBy(_ => _.Name).ToArray();
}
}
Then just call the static method to get an array of your LAN computers...
var localComputers = NetworkComputer.GetLocalNetwork();

Nazim was correct. And krowe2's reply is factually incorrect. Switches absolutely forward broadcast traffic. You can send a ping to the subnet's broadcast address under the following conditions.
1.a) You are on the same subnet.
1.b) the gateway allows for IP direct broadcast
2.a) The subnet is not part of a fabric network.
2.b) If the subnet is part of a fabric, broadcast traffic is allowed on the subnet.
In about 80% of networks (and about 99.99% of networks using 192.168.1.1 as a gateway) this will work. I'm a network engineer and I do this all the time.
You CAN NOT rely on ICMP (ping) responses to validate the existence of a device on a network. The problem is that no device is required to listen to any traffic. Not ping, not SNMP, not NetBios. The only real way to be sure is to look at the ARP table.
You have to send out any kind of traffic to every IP in the subnet and look at your own ARP table. Because no device can get any traffic until resolve the MAC address of the IP on the local subnet. So before a device decides if it's going to listen to traffic or not, it has to respond to an ARP request. Your device then caches this in it's ARP table and can send frames with the right destination MAC to the other device.
On a Windows PC, the command line command is 'arp -a'. Linux is 'arp -n' if I recall correctly.

You could ping the adress range and note if a host responded. Of course, this will require the host to respond to the ping packets.

namespace WindowsFormsApplication1
{
class WifiInformation
{
static CountdownEvent countdown;
static int upCount = 0;
static object lockObj = new object();
const bool resolveNames = true;
static void Main(string[] args)
{
string ipBase = getIPAddress();
string[] ipParts = ipBase.Split('.');
ipBase = ipParts[0] + "." + ipParts[1] + "." + ipParts[2] + ".";
for (int i = 1; i < 255; i++)
{
string ip = ipBase + i.ToString();
Ping p = new Ping();
p.PingCompleted += new PingCompletedEventHandler(p_PingCompleted);
p.SendAsync(ip, 100, ip);
}
Console.ReadLine();
}
static void p_PingCompleted(object sender, PingCompletedEventArgs e)
{
string ip = (string)e.UserState;
if (e.Reply != null && e.Reply.Status == IPStatus.Success)
{
if (resolveNames)
{
string name;
try
{
IPHostEntry hostEntry = Dns.GetHostEntry(ip);
name = hostEntry.HostName;
}
catch (SocketException ex)
{
name = "?";
}
Console.WriteLine("{0} ({1}) is up: ({2} ms)", ip, name, e.Reply.RoundtripTime);
}
else
{
Console.WriteLine("{0} is up: ({1} ms)", ip, e.Reply.RoundtripTime);
}
lock (lockObj)
{
upCount++;
}
}
else if (e.Reply == null)
{
Console.WriteLine("Pinging {0} failed. (Null Reply object?)", ip);
}
}
public static string getIPAddress()
{
IPHostEntry host;
string localIP = "";
host = Dns.GetHostEntry(Dns.GetHostName());
foreach (IPAddress ip in host.AddressList)
{
if (ip.AddressFamily == AddressFamily.InterNetwork)
{
localIP = ip.ToString();
}
}
return localIP;
}
}
}

Instead of arranging a wild ping-party, you could possibly (I really don't know exactly!) use NetBIOS (request the netbios nametable somehow?) http://technet.microsoft.com/en-us/library/cc757216%28WS.10%29.aspx. Or why not ask your DHCP server?

Ping to the global broadcast ip address (192.168.1.255)
Normally we will get the reply from all the host connected to the LAN.. Or if you have any particular network for the lan, ping to that networks broadcast id (i.e the last ip address in that range ).
Then you can know all the ip address connected to the host in lan.

What is my internet accessing IP

I have two lan cards installed in my pc. One is for internet connection and another for share the internet to client machines. I am getting my IP with this code:
IPHostEntry HosyEntry = Dns.GetHostEntry((Dns.GetHostName()));
foreach (IPAddress ip in HosyEntry.AddressList)
{
trackingIp = ip.ToString();
textBox1.Text += trackingIp + ",";
}
How can I find which one my internet connecting IP (I dont want to do it by text processing)?

The best way to get this information is to use WMI, this program outputs the IP addresses for the network adapter that's registered for the network destination "0.0.0.0", which is for all intents and purposes "not my network", aka "the internet" (Note: I'm not a networking expert so that may not be entirely correct).
using System;
using System.Management;
namespace ConsoleApplication10
{
class Program
{
static void Main(string[] args)
{
ManagementObjectSearcher searcher = new ManagementObjectSearcher("root\\CIMV2",
"SELECT * FROM Win32_IP4RouteTable WHERE Destination=\"0.0.0.0\"");
int interfaceIndex = -1;
foreach (var item in searcher.Get())
{
interfaceIndex = Convert.ToInt32(item["InterfaceIndex"]);
}
searcher = new ManagementObjectSearcher("root\\CIMV2",
string.Format("SELECT * FROM Win32_NetworkAdapterConfiguration WHERE InterfaceIndex={0}", interfaceIndex));
foreach (var item in searcher.Get())
{
var ipAddresses = (string[])item["IPAddress"];
foreach (var ipAddress in ipAddresses)
{
Console.WriteLine(ipAddress);
}
}
}
}
}

Ok. I wrote 2 methods.
First method is faster but require to use a socket.
It tries to connect to remote host using each local IP.
Second methos is slower and did not use sockets. It connects to remote host (get response, waste some traffic) and look for local IP in the active connections table.
Code is draft so double check it.
namespace ConsoleApplication1
{
using System;
using System.Collections.Generic;
using System.Net;
using System.Net.NetworkInformation;
using System.Net.Sockets;
class Program
{
public static List<IPAddress> GetInternetIPAddressUsingSocket(string internetHostName, int port)
{
// get remote host IP. Will throw SocketExeption on invalid hosts
IPHostEntry remoteHostEntry = Dns.GetHostEntry(internetHostName);
IPEndPoint remoteEndpoint = new IPEndPoint(remoteHostEntry.AddressList[0], port);
// Get all locals IP
IPHostEntry hostEntry = Dns.GetHostEntry(Dns.GetHostName());
var internetIPs = new List<IPAddress>();
// try to connect using each IP
foreach (IPAddress ip in hostEntry.AddressList) {
IPEndPoint localEndpoint = new IPEndPoint(ip, 80);
bool endpointIsOK = true;
try {
using (Socket socket = new Socket(localEndpoint.Address.AddressFamily, SocketType.Stream, ProtocolType.Tcp)) {
socket.Connect(remoteEndpoint);
}
}
catch (Exception) {
endpointIsOK = false;
}
if (endpointIsOK) {
internetIPs.Add(ip); // or you can return first IP that was found as single result.
}
}
return internetIPs;
}
public static HashSet <IPAddress> GetInternetIPAddress(string internetHostName)
{
// get remote IPs
IPHostEntry remoteMachineHostEntry = Dns.GetHostEntry(internetHostName);
var internetIPs = new HashSet<IPAddress>();
// connect and search for local IP
WebRequest request = HttpWebRequest.Create("http://" + internetHostName);
using (WebResponse response = request.GetResponse()) {
IPGlobalProperties properties = IPGlobalProperties.GetIPGlobalProperties();
TcpConnectionInformation[] connections = properties.GetActiveTcpConnections();
response.Close();
foreach (TcpConnectionInformation t in connections) {
if (t.State != TcpState.Established) {
continue;
}
bool isEndpointFound = false;
foreach (IPAddress ip in remoteMachineHostEntry.AddressList) {
if (ip.Equals(t.RemoteEndPoint.Address)) {
isEndpointFound = true;
break;
}
}
if (isEndpointFound) {
internetIPs.Add(t.LocalEndPoint.Address);
}
}
}
return internetIPs;
}
static void Main(string[] args)
{
List<IPAddress> internetIP = GetInternetIPAddressUsingSocket("google.com", 80);
foreach (IPAddress ip in internetIP) {
Console.WriteLine(ip);
}
Console.WriteLine("======");
HashSet<IPAddress> internetIP2 = GetInternetIPAddress("google.com");
foreach (IPAddress ip in internetIP2) {
Console.WriteLine(ip);
}
Console.WriteLine("Press any key");
Console.ReadKey(true);
}
}
}

NICs that route to the Internet have a gateway. The benefit of this approach is that you don't have to do a DNS lookup or bounce of a web server.
Here's some code that displays local IPs for a NIC that has a valid gateway:
/// <summary>
/// This utility function displays all the IP addresses that likely route to the Internet.
/// </summary>
public static void DisplayInternetIPAddresses()
{
var sb = new StringBuilder();
// Get a list of all network interfaces (usually one per network card, dialup, and VPN connection)
var networkInterfaces = NetworkInterface.GetAllNetworkInterfaces();
foreach (var network in networkInterfaces)
{
// Read the IP configuration for each network
var properties = network.GetIPProperties();
// Only consider those with valid gateways
var gateways = properties.GatewayAddresses.Select(x => x.Address).Where(
x => !x.Equals(IPAddress.Any) && !x.Equals(IPAddress.None) && !x.Equals(IPAddress.Loopback) &&
!x.Equals(IPAddress.IPv6Any) && !x.Equals(IPAddress.IPv6None) && !x.Equals(IPAddress.IPv6Loopback));
if (gateways.Count() < 1)
continue;
// Each network interface may have multiple IP addresses
foreach (var address in properties.UnicastAddresses)
{
// Comment these next two lines to show IPv6 addresses too
if (address.Address.AddressFamily != AddressFamily.InterNetwork)
continue;
sb.AppendLine(address.Address + " (" + network.Name + ")");
}
}
MessageBox.Show(sb.ToString());
}

You could use http://www.whatismyip.org/ it echos back your IP.