i'm actually use this code to encode my data with c#.
public static string encrypt_data(string clearText ,string EncryptionKey) {
byte[] clearBytes = Encoding.Unicode.GetBytes(clearText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateEncryptor(), CryptoStreamMode.Write))
{
cs.Write(clearBytes, 0, clearBytes.Length);
cs.Close();
}
clearText = Convert.ToBase64String(ms.ToArray());
}
}
return clearText;
}
and i'm looking for the code to decode the data in angular 8 (ts)
Related
public string Decrypt(string cipherText)
{
string EncryptionKey = "MAKV2SPBNI99212";
byte[] cipherBytes = Convert.FromBase64String(cipherText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateDecryptor(), CryptoStreamMode.Write))
{
cs.Write(cipherBytes, 0, cipherBytes.Length);
cs.Close();
}
cipherText = Encoding.Unicode.GetString(ms.ToArray());
}
}
return cipherText;
}
"The input data is not a complete block" error when i try to decrypt
.Error evoke at cs.close();
and below is encryption which is work fine
public string encrypt(string clearText)
{
string EncryptionKey = "MAKV2SPBNI99212";
byte[] clearBytes = Encoding.Unicode.GetBytes(clearText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateEncryptor(), CryptoStreamMode.Write))
{
cs.Write(clearBytes, 0, clearBytes.Length);
cs.Close();
}
clearText = Convert.ToBase64String(ms.ToArray());
}
}
return clearText;
}
Encryption working fine it encrypt string correctly but when i want to decrpt it evokes error
I have a requirement where I want to send the User the link of the form via Email. The link for every user will be different. Currently I am just passing hardcode value in the mail.
Here is my code.
sb.AppendLine("Please click on the link to view the details.");
sb.AppendLine("</br></br>");
sb.AppendLine("<a href='" + ConfigurationManager.AppSettings["ClickHereLink"].ToString() + "' >Click here to open request</a>. ");
sb.AppendLine("</br></br>");
sb.AppendLine("<b>This is a system generated mail. Please do not reply to the sender.</b>");
And the ClickHereLink is been defined in Web.config like below
<add key="ClickHereLink" value="https://www.test.com"/>
How can I send dynamic link for every user based on the details
Encryption Method
public static class EncryptDecrypt
{
public static string Encrypt(string clearText)
{
string EncryptionKey = "MAKV2SPBNI99212";
byte[] clearBytes = Encoding.Unicode.GetBytes(clearText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateEncryptor(), CryptoStreamMode.Write))
{
cs.Write(clearBytes, 0, clearBytes.Length);
cs.Close();
}
clearText = Convert.ToBase64String(ms.ToArray());
}
}
return clearText;
}
public static string Decrypt(string cipherText)
{
string EncryptionKey = "MAKV2SPBNI99212";
cipherText = cipherText.Replace(" ", "+");
byte[] cipherBytes = Convert.FromBase64String(cipherText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateDecryptor(), CryptoStreamMode.Write))
{
cs.Write(cipherBytes, 0, cipherBytes.Length);
cs.Close();
}
cipherText = Encoding.Unicode.GetString(ms.ToArray());
}
}
return cipherText;
}
}
I am assuming that you are using .Net 4.x, and if so Try this,
if you are not using 4.x then where I have used string interoperlation then you should change that for string.Format("...", ...);
void Main()
{
var urlStr = new StringBuilder();
var url = "http://www.yoursite.com";
urlStr.Append($"{url}?{BuildQs(Request.QueryString)}");
}
private string BuildQs(System.Collections.Specialized.NameValueCollection collection)
{
var sb = new StringBuilder();
foreach (var key in collection.Keys)
{
var value = collection[key.ToString()].ToString();
sb.Append($"{key}={value}");
}
var enc = new EncryptDecrypt();
return enc.Encrypt(sb.ToString());
}
public class EncryptDecrypt
{
public string Encrypt(string clearText)
{
string EncryptionKey = "MAKV2SPBNI99212";
byte[] clearBytes = Encoding.Unicode.GetBytes(clearText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateEncryptor(), CryptoStreamMode.Write))
{
cs.Write(clearBytes, 0, clearBytes.Length);
cs.Close();
}
clearText = Convert.ToBase64String(ms.ToArray());
}
}
return clearText;
}
public static string Decrypt(string cipherText)
{
string EncryptionKey = "MAKV2SPBNI99212";
cipherText = cipherText.Replace(" ", "+");
byte[] cipherBytes = Convert.FromBase64String(cipherText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateDecryptor(), CryptoStreamMode.Write))
{
cs.Write(cipherBytes, 0, cipherBytes.Length);
cs.Close();
}
cipherText = Encoding.Unicode.GetString(ms.ToArray());
}
}
return cipherText;
}
}
Is there any functions in PHP that is equivalent to c# Rijndael AES encryption/decryption? I have include the c# code below. Please advise.
protected string Encrypt(string clearText)
{
string EncryptionKey = "test";
byte[] clearBytes = Encoding.Unicode.GetBytes(clearText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateEncryptor(), CryptoStreamMode.Write))
{
cs.Write(clearBytes, 0, clearBytes.Length);
cs.Close();
}
clearText = Convert.ToBase64String(ms.ToArray());
}
}
return clearText;
}
I have written the following code to decrypt some sensitive data, in most of the cases i need to query data using T-SQL where i can't decrypt the the data that is encrypted by this code. so my question is this how can i write a function in T-SQL that work the same way as like it work in C#, I will consume that in Stored procedures.
thanks in Advance
Encryption Function:
public static string Encrypt(string text)
{
if (string.IsNullOrEmpty(EncryptionKey))
return string.Empty;
if (string.IsNullOrEmpty(text))
return string.Empty;
var clearBytes = Encoding.Unicode.GetBytes(text);
using (var encryptor = Aes.Create())
{
var pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[]
{
0x49,
0x76,
0x61,
0x6e,
0x20,
0x4d,
0x65,
0x64,
0x76,
0x65,
0x64,
0x65,
0x76
});
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (var ms = new MemoryStream())
{
using (var cs = new CryptoStream(ms, encryptor.CreateEncryptor(), CryptoStreamMode.Write))
{
cs.Write(clearBytes, 0, clearBytes.Length);
}
text = Convert.ToBase64String(ms.ToArray());
}
}
return text;
}
Decryption Function:
public static string Decrypt(string text)
{
if (string.IsNullOrEmpty(EncryptionKey))
return string.Empty;
if (string.IsNullOrEmpty(text))
return string.Empty;
var cipherBytes = Convert.FromBase64String(text);
using (var encryptor = Aes.Create())
{
var pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[]
{
0x49,
0x76,
0x61,
0x6e,
0x20,
0x4d,
0x65,
0x64,
0x76,
0x65,
0x64,
0x65,
0x76
});
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (var ms = new MemoryStream())
{
using (var cs = new CryptoStream(ms, encryptor.CreateDecryptor(), CryptoStreamMode.Write))
{
cs.Write(cipherBytes, 0, cipherBytes.Length);
}
text = Encoding.Unicode.GetString(ms.ToArray());
}
}
return text;
}
You can create a CLR UDF in SQL Server.
Refer following links for more info:
http://blog.sqlauthority.com/2008/10/19/sql-server-introduction-to-clr-simple-example-of-clr-stored-procedure/
https://msdn.microsoft.com/en-us/library/w2kae45k(v=vs.90).aspx
Could anyone provide an example of performing exactly the same encryption/decryption as the C# code below, but with T-SQL?
The below functions are used to encrypt/decrypt given strings for later storage in a database. But I'm just curious to know whether there is a T-SQL-way of doing the exact same thing.
Note: The value of the string variable "EncryptionKey" is made up for this specific purpose
private string Encrypt(string clearText)
{
string EncryptionKey = "MAKV2SPBNI99212";
byte[] clearBytes = Encoding.Unicode.GetBytes(clearText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateEncryptor(), CryptoStreamMode.Write))
{
cs.Write(clearBytes, 0, clearBytes.Length);
cs.Close();
}
clearText = Convert.ToBase64String(ms.ToArray());
}
}
return clearText;
}
private string Decrypt(string cipherText)
{
string EncryptionKey = "MAKV2SPBNI99212";
byte[] cipherBytes = Convert.FromBase64String(cipherText);
using (Aes encryptor = Aes.Create())
{
Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
encryptor.Key = pdb.GetBytes(32);
encryptor.IV = pdb.GetBytes(16);
using (MemoryStream ms = new MemoryStream())
{
using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateDecryptor(), CryptoStreamMode.Write))
{
cs.Write(cipherBytes, 0, cipherBytes.Length);
cs.Close();
}
cipherText = Encoding.Unicode.GetString(ms.ToArray());
}
}
return cipherText;
}