Develop Reference

WPF MVVM - Simple Binding Button with Textbox (Icommand)

What I'm trying to do is: when the textbox contains the value "123" it should enable the button and allow me to click it.
Solution Image &
View Image
I can not find a way to trigger the Button Command (Class called SpecialCommand.cs) based on my Button parameters. Could you support where I'm getting this MVVM pattern wrong?
WPF View [MainWindow.xaml]:
<Window.Resources>
<ViewModel:MainWindowVM x:Key="WindowVm"></ViewModel:MainWindowVM>
</Window.Resources>
<Grid>
<StackPanel>
<TextBox x:Name="textBox" Margin="0, 5" Text="123"/>
<Button Content="Click me!" Margin="0, 5" Command="{Binding SpecialCommand, Source={StaticResource WindowVm}}" CommandParameter="{Binding Text, ElementName=textBox, UpdateSourceTrigger=PropertyChanged, Mode=TwoWay}"/>
</StackPanel>
</Grid>
ViewModel [MainWindowVM.cs]:
public class MainWindowVM
{
private SpecialCommand _specialCommand;
public SpecialCommand SpecialCommand { get => _specialCommand; set => _specialCommand = value; }
public MainWindowVM()
{
_specialCommand = new SpecialCommand();
}
}
Command [SpecialCommand.cs]
public class SpecialCommand : ICommand
{
public bool CanExecute(object parameter)
{
if (parameter != null && (parameter as string) == "123")
return true;
return false;
}
public void Execute(object parameter)
{
MessageBox.Show("Button Pressed!");
}
public event EventHandler CanExecuteChanged;
}
What I believe, maybe this is what I'm getting wrong is since Button & Textbox are in the View I don't need add/modify any method in my SpecialCommand implementation. They should be able to see when a property is changed.
Like the CanExecuteChanged() below, this command raises a lot of times and seems overkill for this small task.
public event EventHandler CanExecuteChanged
{
add { CommandManager.RequerySuggested += value; }
remove { CommandManager.RequerySuggested -= value; }
}

There is no need to make it more complicated than it needs to be.
public class MainWindowVM
{
private string m_OneTwoThree;
public string OneTwoThree{
get { return OneTwoThree; }
set {
if (m_OneTwoThree != value){
m_OneTwoThree = value;
NotifyPropertyChanged(nameof(OneTwoThree)); //if you need this let me know
}
}
}
public MainWindowVM()
{
}
public ICommand RandomCommand { get { return new RelayCommand(OnRandom, IsOneTwoThree); } }
private void OnRandom()
{
//do stuff
}
private bool IsOneTwoThree(){
if (OneTwoThree == "123"){
return true;
}
return false;
}
}
You'll also have to update your xaml I don't think it'll be able to find 'OneTwoThree' so you'll have to bind it yourself, however you usually would.
<StackPanel>
<TextBox x:Name="textBox" Margin="0, 5" Text="{Binding OneTwoThree}"/>
<Button Content="Click me!" Margin="0, 5" Command="{Binding RandomCommand, Source={StaticResource WindowVm}}"/>
</StackPanel>
If you have any questions just ask.
This is my RelayCommand : Use RelayCommand("thing to execute", "if function returns true you can execute");
public class RelayCommand : ICommand
{
public event EventHandler CanExecuteChanged
{
add { CommandManager.RequerySuggested += value; }
remove { CommandManager.RequerySuggested -= value; }
}
private Action methodToExecute;
private Func<bool> canExecuteEvaluator;
public RelayCommand(Action methodToExecute, Func<bool> canExecuteEvaluator)
{
this.methodToExecute = methodToExecute;
this.canExecuteEvaluator = canExecuteEvaluator;
}
public RelayCommand(Action methodToExecute)
: this(methodToExecute, null)
{
}
public bool CanExecute(object parameter)
{
if (this.canExecuteEvaluator == null) {
return true;
}
else {
bool result = this.canExecuteEvaluator.Invoke();
return result;
}
}
public void Execute(object parameter)
{
this.methodToExecute.Invoke();
}
}

You need a way to tell the command that it should check whether it CanExecute. This is done by triggering the event CanExecuteChanged. It tells the button to requery the CanExecute property.
For this to work, I would add a text property to your view model and bind the textbox to it.
In SpecialCommand add the method:
public void TriggerCanExecuteChanged()
{
CanExecuteChanged?.Invoke(this, EventArgs.Empty);
}
In the class MainWindowVM add the property:
private string _text;
public string Text
{
get { return _text; }
set {
if (value != _text) {
_text = value;
_specialCommand.TriggerCanExecuteChanged();
}
}
}
View Model to implementing INotifyPropertyChanged (see comments):
public class MainWindowVM : INotifyPropertyChanged
{
public SpecialCommand SpecialCommand { get; set; } = new SpecialCommand();
private string _text;
public string Text
{
get { return _text; }
set {
if (value != _text) {
_text = value;
OnPropertyChanged(nameof(Text));
SpecialCommand.TriggerCanExecuteChanged();
}
}
}
public event PropertyChangedEventHandler PropertyChanged;
private void OnPropertyChanged(string propertyName)
{
PropertyChanged?.Invoke(this, new PropertyChangedEventArgs(propertyName));
}
}

copy textbox value to another when click on Button Command in WPF MVVM

I have two text box and want to copy first textbox value to another textbox whenever I click on Button and this should done by using Commands in WPF.
This is my scenario :
First textbox binds the value from Person class.
Button shows simple MsgBox which verifies that Command executed properly.
Well here, I want to pass first textbox value to 2nd textbox (using Command) ?
XML File:
<Window x:Class="PrismDemo.Views.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:vm="clr-namespace:PrismDemo.ViewModels"
Title="MainWindow" Height="350" Width="525">
<Window.DataContext>
<vm:Person x:Name="vmmmm1" />
</Window.DataContext>
<Grid>
<TextBox x:Name="fName" Grid.Row="1" Height="30" Width="100" Text="{Binding Path=FirstName, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"/>
<Button Name="Submit" Grid.Row="2" Height="30" Width="100" Content="Submit Me" Command="{Binding submitCommand}" CommandParameter="{Binding Text, ElementName=fName}"/>
<TextBox x:Name="display" Grid.Row="3" Height="30" Width="100" Text="{}" />
Person class (ViewModel):
public class Person:INotifyPropertyChanged
{
private string _firstName;
private string _copyName;
public ICommand submitCommand {get;set;}
public Person()
{
_firstName = "Ronaldo";
submitCommand = new RelayCommand(MyMethod, canExecuteMethod);
}
public string FirstName
{
get
{
return _firstName;
}
set
{
_firstName = value;
OnPropertyUpdated(FirstName);
//OnPropertyUpdated(CopyName);
}
}
public string CopyName
{
get
{
return _copyName;
}
set
{
OnPropertyUpdated(CopyName);
}
}
private void OnPropertyUpdated(string property)
{
if (PropertyChanged != null)
{
PropertyChanged(this, new PropertyChangedEventArgs(property));
}
}
private bool canExecuteMethod(object parameter)
{
return true;
}
private void MyMethod(object parameter)
{
MessageBox.Show("Welcome to Command Demo...");
//if (parameter == null) return;
//_copyName = parameter.ToString();
this._copyName = _firstName;
}
public event PropertyChangedEventHandler PropertyChanged;
}
Any help will be appreciated.
Thank you !!

You were almost right ....Its working at my place properly , Just make following changes in you code
Just remove command parameter... we dont need it and Bind the copied string.
<TextBox Grid.Row="1" Height="30" Width="100" Text="{Binding FirstName}" />
<Button Grid.Row="2" Height="30" Width="100" Content="Submit Me" Command="{Binding submitCommand}"/>
TextBox Grid.Row="3" Height="30" Width="100" Text="{Binding CopyName}" />
In View model make following changes...
public class Person:INotifyPropertyChanged{
private string _firstName;
private string _copyName=string.Empty;
public Person()
{
_firstName = "Ronaldo";
submitCommand = new RelayCommand(MyMethod, canExecuteMethod);
}
public string FirstName
{
get
{
return _firstName;
}
set
{
_firstName = value;
OnPropertyChanged("FirstName");
}
}
public string CopyName
{
get
{
return _copyName;
}
set
{
if (_copyName != value)
{
_copyName = value;
OnPropertyChanged("CopyName");
}
}
}
public ICommand submitCommand { get; set; }
private void MyMethod(object param)
{
MessageBox.Show("Welcome to Command Demo...");
CopyName = FirstName;
}
private bool canExecuteMethod(object parameter)
{
return true;
}
public event PropertyChangedEventHandler PropertyChanged;
protected void OnPropertyChanged(params string[] propertyNames)
{
PropertyChangedEventHandler handler = PropertyChanged;
if (handler != null)
{
foreach (string propertyName in propertyNames) PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
handler(this, new PropertyChangedEventArgs("HasError"));
}
}
}

You don't need CommandParameter here.
<Button Name="Submit" Grid.Row="2" Height="30" Width="100" Content="Submit Me" Command="{Binding submitCommand}" />
Add the Display property:
public string Display
{
get
{
return _display;
}
set
{
_display = value;
OnPropertyUpdated(Display);
}
}
Fix the binding in the second TextBox:
<TextBox x:Name="display" Grid.Row="3" Height="30" Width="100" Text="{Binding Display}" />
Update MyMethod:
private void MyMethod(object parameter)
{
MessageBox.Show("Welcome to Command Demo...");
Display = FirstName;
}

Here is how to copy text from one textBox to another.
this is dataContext behinde MainWindow
public class TestVM : INotifyPropertyChanged
{
public TestVM()
{
CopyCommand = new RelayCommand<string>(OnCopyExecuted);
}
private void OnCopyExecuted(string commandParameter)
{
TextUpdate = commandParameter;
}
private string _textUpdate;
public string TextUpdate
{
get { return _textUpdate; }
set
{
if (_textUpdate != value)
{
_textUpdate = value;
OnPropertyChanged();
}
}
}
public RelayCommand<string> CopyCommand { get; private set; }
public event PropertyChangedEventHandler PropertyChanged = delegate { };
public virtual void OnPropertyChanged([CallerMemberName] string propertyName = "")
{
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
}
}
Generic RelayCommand that can take parameters
public class RelayCommand<T> : ICommand
{
private Action<T> _executeMethod;
private Func<T, bool> _canExecuteMethod;
#region RelayCommand ctor
public RelayCommand(Action<T> executeMethod)
{
_executeMethod = executeMethod;
}
public RelayCommand(Action<T> executeMethod, Func<T, bool> canExecuteMethod)
{
_executeMethod = executeMethod;
_canExecuteMethod = canExecuteMethod;
}
#endregion
public void RaiseCanExecuteChanged()
{
CanExecuteChanged(this, EventArgs.Empty);
}
#region ICommand Members
bool ICommand.CanExecute(object parameter)
{
var Tparam = (T)parameter;
if (_canExecuteMethod != null)
return _canExecuteMethod(Tparam);
if (_executeMethod != null)
return true;
return false;
}
void ICommand.Execute(object parameter)
{
if (_executeMethod != null)
_executeMethod((T)parameter);
}
public event EventHandler CanExecuteChanged = delegate { };
#endregion
}
and MainWindow xaml just to show purpose
<Window.DataContext>
<local:TestVM />
</Window.DataContext>
<Grid>
<TextBox x:Name="txt1"
Height="35"
Width="150"
Margin="49,62,318,224" />
<TextBox Text="{Binding TextUpdate}"
Height="35"
Width="150"
Margin="313,62,54,226" />
<Button Command="{Binding CopyCommand}"
CommandParameter="{Binding ElementName=txt1,Path=Text}"
Content="Copy"
Grid.Row="0"
Margin="208,157,198,132" />
</Grid>
It's working. Now you can implement it as it fits your needs.

How to bind with Mode=OneWay and only propagate changes back on save?

Question
How can I make it so that changes to a note are only propagated back to the list, when the Save button is clicked instead on "lost focus"?
And the Save button should only be enabled when the note has been changed.
UI
The example application looks like this:
The current behaviour is:
Clicking on a note puts its text into the TextBox; that's fine.
The changed text from the TextBox gets written back to the list when the TextBox loses the focus (default binding behaviour); but I only want that to happend when the Save button is clicked.
The Save button is always activated because the CanExecute(object parameter) isn't correctly implemented yet; it should only get activated when the TextBox text is different from the selected note's text.
My research so far
Option 1: Some Internet sources say to bind a different property to the TextBox and to programmatically check whether it is different from the SelectedItem of the ListView. I would have hoped that there was a way without introducing a third property in addition to the already existing ListOfNotes and SelectedNote.
Option 2: Some Internet sources recommend to configure Mode=OneWay so that clicking an item in the ListView updates the TextBox, but not the other way around. This sounds like the solution I would prefer, but I wasn't able to figure out from the code examples how to raise an event programmatically so that the change in the TextBox gets written back to the ListView when the Save button is clicked.
I've found other Stackoverflow questions that seem to be similar to mine, but the answers to those haven't helped me fix the problem:
WPF databinding after Save button click
Code
This example currently does two-way binding on focus lost. How do I need to change it to get the above described behaviour?
https://github.com/lernkurve/WpfBindingOneWayWithSaveButton
MainWindow.xaml
<Window x:Class="WpfBindingOneWayWithSaveButton.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:wpfBindingOneWayWithSaveButton="clr-namespace:WpfBindingOneWayWithSaveButton"
mc:Ignorable="d"
Title="MainWindow" Height="188.636" Width="299.242">
<Window.DataContext>
<wpfBindingOneWayWithSaveButton:MainWindowsViewModel />
</Window.DataContext>
<Grid>
<GroupBox Header="List of notes" HorizontalAlignment="Left" VerticalAlignment="Top" Height="112" Width="129" Margin="0,24,0,0">
<ListView ItemsSource="{Binding ListOfNotes}" SelectedItem="{Binding SelectedNote}" DisplayMemberPath="Text" HorizontalAlignment="Left" Height="79" VerticalAlignment="Top" Width="119" Margin="0,10,-2,0"/>
</GroupBox>
<GroupBox Header="Change selected note" HorizontalAlignment="Left" Margin="134,24,0,0" VerticalAlignment="Top" Height="112" Width="151">
<Grid HorizontalAlignment="Left" Height="89" Margin="0,0,-2,0" VerticalAlignment="Top" Width="141">
<Grid.ColumnDefinitions>
<ColumnDefinition Width="40*"/>
<ColumnDefinition Width="101*"/>
</Grid.ColumnDefinitions>
<TextBox Text="{Binding SelectedNote.Text}" HorizontalAlignment="Left" Height="23" TextWrapping="Wrap" VerticalAlignment="Top" Width="121" Margin="10,7,0,0" Grid.ColumnSpan="2"/>
<Button Command="{Binding SaveCommand}" Content="Save" HorizontalAlignment="Left" VerticalAlignment="Top" Width="121" Margin="10,35,0,0" Grid.ColumnSpan="2"/>
</Grid>
</GroupBox>
</Grid>
</Window>
MainWindowsViewModel.cs
using System.Collections.ObjectModel;
using System.Windows.Input;
namespace WpfBindingOneWayWithSaveButton
{
public class MainWindowsViewModel
{
public ObservableCollection<Note> ListOfNotes { get; set; }
public Note SelectedNote { get; set; }
public ICommand SaveCommand { get; set; }
public MainWindowsViewModel()
{
ListOfNotes = new ObservableCollection<Note>
{
new Note { Text = "Note 1" },
new Note { Text = "Note 2" }
};
SaveCommand = new SaveCommand(this);
}
}
}
SaveCommand.cs
using System;
using System.Windows.Input;
namespace WpfBindingOneWayWithSaveButton
{
public class SaveCommand : ICommand
{
private MainWindowsViewModel vm;
public SaveCommand(MainWindowsViewModel vm)
{
this.vm = vm;
}
public bool CanExecute(object parameter)
{
// What should go here?
return true;
// Pseudo code
// return (is the TextBox text different from the original note text)
}
public void Execute(object parameter)
{
// What should go here?
// Pseudo code
// Let WPF know that the TextBox text has changed
// Invoke the binding so it propagates the TextBox text back to the list
}
public event EventHandler CanExecuteChanged;
}
}
Note.cs
using System.ComponentModel;
using System.Runtime.CompilerServices;
namespace WpfBindingOneWayWithSaveButton
{
public class Note : INotifyPropertyChanged
{
private string text;
public string Text
{
get { return text; }
set
{
text = value;
OnPropertyChanged();
}
}
public event PropertyChangedEventHandler PropertyChanged;
protected virtual void OnPropertyChanged([CallerMemberName] string propertyName = null)
{
PropertyChanged?.Invoke(this, new PropertyChangedEventArgs(propertyName));
}
}
}

Bind the text to the CommandParameter of the SaveButton so it gets passed to the Save method for updating.
<TextBox x:Name="NoteTextBox" Text="{Binding SelectedNote.Text, Mode=OneTime}" ../>
<Button Command="{Binding SaveCommand}"
CommandParameter="{Binding ElementName=NoteTextBox, Path=Text}",
Content="Save" />
and
public bool CanExecute(object parameter)
{
return vm.SelectedNote.Text != parameter as string;
}
public void Execute(object parameter)
{
vm.SelectedNote.Text = parameter as string;
}

Option one is the easiest to implement, you will need to clone the Note object and set it to a separate property.
in your xaml, change your list view to the following so it now binds the SelectedIndex instead of the SelectedItem.
<ListView ItemsSource="{Binding ListOfNotes}" SelectedIndex="{Binding SelectedIndex}" DisplayMemberPath="Text" ...
And change TextBox to the following so it updates the binding as you type
<TextBox Text="{Binding Path=SelectedNote.Text, UpdateSourceTrigger=PropertyChanged}" HorizontalAlignment="Left" ...
In Note.cs we add the Clone() method.
public class Note : INotifyPropertyChanged
{
public Note Clone()
{
return new Note()
{
Text = this.Text
};
}
//... The rest stays the same
}
In MainWindowsViewModel.cs we add new properties for the SelectedIndex and clone the object when we detect a index has changed. We also need to add INotifyPropertyChanged so we can update the SelectedNote from the codebehind when we do the Clone()
public class MainWindowsViewModel : INotifyPropertyChanged
{
private int _selectedIndex = -1;
private Note _selectedNote;
public int SelectedIndex
{
get { return _selectedIndex; }
set
{
if (_selectedIndex.Equals(value))
return;
_selectedIndex = value;
CloneSelectedNote();
}
}
private void CloneSelectedNote()
{
if (SelectedIndex >= 0)
{
SelectedNote = ListOfNotes[SelectedIndex].Clone();
}
else
{
SelectedNote = null;
}
}
public event PropertyChangedEventHandler PropertyChanged;
protected virtual void OnPropertyChanged([CallerMemberName] string propertyName = null)
{
PropertyChanged?.Invoke(this, new PropertyChangedEventArgs(propertyName));
}
public Note SelectedNote
{
get { return _selectedNote; }
set
{
if(Equals(_selectedNote, value))
return;
_selectedNote = value;
OnPropertyChanged();
}
}
//... The rest stays the same
}
In SaveCommand.cs we add the logic for CanExecute and add the subscriptions to CommandManager.RequerySuggested, this automatically makes it requery the CanExecute any time any binding changes. This can be a little ineffecent, if you wanted to you could expose a RaiseCanExecuteChanged() publicly but it would be MainWindowsViewModel responsibility to call it any time vm.SelectedIndex or vm.SelectedNote.Text changed.
public class SaveCommand : ICommand
{
private MainWindowsViewModel vm;
public SaveCommand(MainWindowsViewModel vm)
{
this.vm = vm;
}
public bool CanExecute(object parameter)
{
if (vm.SelectedIndex < 0 || vm.SelectedNote == null)
return false;
return vm.ListOfNotes[vm.SelectedIndex].Text != vm.SelectedNote.Text;
}
public void Execute(object parameter)
{
vm.ListOfNotes[vm.SelectedIndex] = vm.SelectedNote;
}
public event EventHandler CanExecuteChanged
{
add { CommandManager.RequerySuggested += value; }
remove { CommandManager.RequerySuggested -= value; }
}
}
UPDATE: Here is a updated version that does not use CommandManager
MainWindowsViewModel.cs
public class MainWindowsViewModel : INotifyPropertyChanged
{
private int _selectedIndex = -1;
private Note _selectedNote;
public int SelectedIndex
{
get { return _selectedIndex; }
set
{
if (_selectedIndex.Equals(value))
return;
_selectedIndex = value;
CloneSelectedNote();
RecheckSaveCommand();
}
}
private void CloneSelectedNote()
{
if (SelectedIndex >= 0)
{
SelectedNote = ListOfNotes[SelectedIndex].Clone();
}
else
{
SelectedNote = null;
}
}
public event PropertyChangedEventHandler PropertyChanged;
protected virtual void OnPropertyChanged([CallerMemberName] string propertyName = null)
{
PropertyChanged?.Invoke(this, new PropertyChangedEventArgs(propertyName));
}
public Note SelectedNote
{
get { return _selectedNote; }
set
{
if(Equals(_selectedNote, value))
return;
if (_selectedNote != null)
{
PropertyChangedEventManager.RemoveHandler(_selectedNote, SelectedNoteTextChanged, nameof(Note.Text));
}
_selectedNote = value;
if (_selectedNote != null)
{
PropertyChangedEventManager.AddHandler(_selectedNote, SelectedNoteTextChanged, nameof(Note.Text));
}
OnPropertyChanged();
}
}
private void SelectedNoteTextChanged(object sender, PropertyChangedEventArgs propertyChangedEventArgs)
{
RecheckSaveCommand();
}
private void RecheckSaveCommand()
{
var command = this.SaveCommand as WpfBindingOneWayWithSaveButton.SaveCommand; //"this." and "WpfBindingOneWayWithSaveButton." are not necessary but I wanted to be explicit.
if (command != null)
{
command.RaiseCanExecuteChanged();
}
}
//...
}
SaveCommand.cs
public class SaveCommand : ICommand
{
private MainWindowsViewModel vm;
public SaveCommand(MainWindowsViewModel vm)
{
this.vm = vm;
}
public bool CanExecute(object parameter)
{
if (vm.SelectedIndex < 0 || vm.SelectedNote == null)
return false;
return vm.ListOfNotes[vm.SelectedIndex].Text != vm.SelectedNote.Text;
}
public void Execute(object parameter)
{
vm.ListOfNotes[vm.SelectedIndex] = vm.SelectedNote;
}
public event EventHandler CanExecuteChanged;
public void RaiseCanExecuteChanged()
{
CanExecuteChanged?.Invoke(this, EventArgs.Empty);
}
}

You should not use OneWay but rather an UpdateSourceTrigger of value Explicit. BindingGroups can do this for you though, here's a simple example:
<!-- For change observation -->
<TextBlock Text="{Binding Text}"></TextBlock>
<StackPanel>
<StackPanel.BindingGroup>
<BindingGroup x:Name="EditGroup"></BindingGroup>
</StackPanel.BindingGroup>
<TextBox Text="{Binding Text}"></TextBox>
<Button>
<Button.Command>
<local:CommitGroupCommand BindingGroup="{x:Reference EditGroup}"/>
</Button.Command>
Save
</Button>
</StackPanel>
public class CommitGroupCommand : ICommand
{
public BindingGroup BindingGroup { get; set; }
public event EventHandler CanExecuteChanged;
public bool CanExecute(object parameter)
{
return true;
}
public void Execute(object parameter)
{
BindingGroup.UpdateSources();
}
}
(You could add a validation rule to your binding that requires the value to be different and use that for the CanExecute implementation.)
Using this method allows you to bind directly to the object you intend to edit, so you don't need to copy around values first.

WPF and pattern MVVM how to get value from textbox, send it to ViewModel and save dto model

i'm new in WPF and MVVM. I read many articles about WPF commands, but i have still problem with sending value from property text of textbox to ViewModel.
I'm using entity framework code first.
I want to show text from textbox in MessageBox, but when I click to button with command, linked property of viewmodel is null.
Please can you help me?
View- DetailIncidentWindow.xaml
xmlns:wm="clr-namespace:Admin.ViewModels"
<StackPanel>
<StackPanel.DataContext>
<wm:CommentViewModel/>
</StackPanel.DataContext>
<TextBlock Text="Text komentáře:" Style="{StaticResource TextBlockLabel}" Margin="0,10,0,0"/>
<TextBox Name="TextBox_textKomentar" Width="auto" Height="100" TextWrapping="Wrap" Text="{Binding TextKomentar, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"/>
<TextBlock Text="{Binding TextKomentar, UpdateSourceTrigger=PropertyChanged}"/>
</StackPanel>
Ribbon button- DetailIncidentWindow.xaml
<Custom:RibbonGroup.DataContext>
<wm:CommentViewModel/>
</Custom:RibbonGroup.DataContext>
<Custom:RibbonButton
LargeImageSource="..\Shared\img\save_diskete.png"
Label="Show text"
Command="{Binding ButtonCommand}">
</Custom:RibbonButton>
ViewModel- KomentarViewModel.cs
namespace Admin.ViewModels
{
class CommentViewModel:BaseViewModel
{
#region Data
private string textKomentar;
public string TextKomentar
{
get
{
return textKomentar;
}
set
{
textKomentar = value;
OnPropertyChanged("TextKomentar");
}
}
private ICommand m_ButtonCommand;
public ICommand ButtonCommand
{
get
{
return m_ButtonCommand;
}
set
{
m_ButtonCommand = value;
OnPropertyChanged("ButtonCommand");
}
}
#endregion
#region Constructor
public CommentViewModel()
{
ButtonCommand = new RelayCommand(new Action<object>(ShowMessage));
}
#endregion
#region Methods
public void ShowMessage(object obj)
{
MessageBox.Show(TextKomentar);
}
#endregion
}
}
Command- RelayCommand.cs
class RelayCommand : ICommand
{
private Action<object> _action;
public RelayCommand(Action<object> action)
{
_action = action;
}
#region ICommand Members
public bool CanExecute(object parameter)
{
return true;
}
public event EventHandler CanExecuteChanged;
public void Execute(object parameter)
{
if (parameter != null)
{
_action(parameter);
}
else
{
_action("Hello World");
}
}
#endregion
}

You should not create multiple instances of your view model, like you do in
<StackPanel.DataContext>
<wm:CommentViewModel/>
</StackPanel.DataContext>
and
<Custom:RibbonGroup.DataContext>
<wm:CommentViewModel/>
</Custom:RibbonGroup.DataContext>
The value of the DataContext property is inherited by child elements, so you could just set it at the top level, e.g. the Window:
<Window ...>
<Window.DataContext>
<wm:CommentViewModel/>
</Window.DataContext>
...
</Window>

How can I handle multiple CheckBoxes in the MVVM pattern?

Binding checkbox in WPF is common issue, but I am still not finding example code which is easy to follow for beginners. I have check box list in WPF to select favorite sports’ name. The number of checkboxes is static in my case. Can anyone show me how to implement ViewModel for this issue?
FavoriteSportsView.xaml:
<StackPanel Height="50" HorizontalAlignment="Left" VerticalAlignment="Top"
Width="150">
<CheckBox IsChecked="{Binding IsChecked, Mode=TwoWay}"
Command="{Binding Path=SportsResponseCommand}"
CommandParameter="Football"
Content="Football"
Margin="5" />
<CheckBox IsChecked="{Binding IsChecked, Mode=TwoWay}"
Command="{Binding Path=SportsResponseCommand}"
CommandParameter="Hockey"
Content="Hockey"
Margin="5" />
<CheckBox IsChecked="{Binding IsChecked, Mode=TwoWay}"
Command="{Binding Path=SportsResponseCommand}"
CommandParameter="Golf"
Content="Golf"
Margin="5" />
</StackPanel>
FavoriteSportsViewModel.cs
public class FavoriteSportsViewModel.cs {
//Since I am using the same IsChecked in all check box options, I found all check
//boxes gets either checked or unchecked when I just check or uncheck one option.
//How do i resolve this issue? I don't think i need seprate IsChecked for each
//check box option.
private bool _isChecked;
public bool IsChecked{
get {
return _isChecked;
}
set { if (value != _isChecked)
_isChecked = value;
this.OnPropertyChanged("IsChecked");
}
}
//How do i detect parameter in this method?
private ICommand _sportsResponseCommand;
public ICommand SportsResponseCommand
{
get
{
if (_sportsResponseCommand== null)
_sportsResponseCommand= new
RelayCommand(a => DoCollectSelectedGames(), p => true);
return _sportsResponseCommand;
}
set
{
_sportsResponseCommand= value;
}
}
private void DoCollectSelectedGames(){
//Here i push all selected games in an array
}
public abstract class ViewModelBase : INotifyPropertyChanged
{
public event PropertyChangedEventHandler PropertyChanged;
public void OnPropertyChanged(string propertyName)
{
if (PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
}
}
}
I'm not sure how to do the following in above ViewModel:
1. How do I implement single method to handle all my options?
2. how do I detect each one of the checkboxes to see whether checked or not
3. How do i utlize CommandParameter?
4. How do i implement SportsResponseCommand correctly

Your view model should look something like this:
public class MyViewModel : INotifyPropertyChanged
{
//INotifyPropertyChanged implementation
public event PropertyChangedEventHandler PropertyChanged;
protected virtual void OnPropertyChanged(string propertyName)
{
if (this.PropertyChanged != null)
this.PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
}
//bindable property
private bool _football;
public bool Football
{
get { return _football; }
set
{
if (value != _football)
{
_football = value;
this.OnPropertyChanged("Football");
}
}
}
//... and the same for Golf and Hockey
}
Then you associate your view model with the view by setting the DataContext property (this will most likely be in the Window or UserControl code behind, though there are a lot of ways to achieve this).
Finally, update your bindings so that they look like:
<CheckBox IsChecked="{Binding Football, Mode=TwoWay}"
Content="Football"
Margin="5" />
<CheckBox IsChecked="{Binding Golf, Mode=TwoWay}"
Content="Football"
Margin="5" />
As a final comment, you shouldn't really need to bind the Command property - you can just write whatever code you need to run in the property setter on the view model.

I highly recommend you to read this http://msdn.microsoft.com/en-us/magazine/dd419663.aspx
I describe a solution below I tried to not modify your XAML code but it is not the only way (or the best approach) but contains all necessary elements!
At first step you need your model I call it Model_Sport
public class Model_Sport : INotifyPropertyChanged
{
#region Constructor
public Model_Sport(string name, ICommand command)
{
Name = name;
SportsResponseCommand = command;
}
#endregion
static readonly PropertyChangedEventArgs _NameEventArgs = new PropertyChangedEventArgs("Name");
private string _Name = null;
public string Name
{
get { return _Name; }
set
{
_Name = value;
OnPropertyChanged(_NameEventArgs);
}
}
static readonly PropertyChangedEventArgs _SportsResponseCommandEventArgs = new PropertyChangedEventArgs("SportsResponseCommand");
private ICommand _SportsResponseCommand = null;
public ICommand SportsResponseCommand
{
get { return _SportsResponseCommand; }
set
{
_SportsResponseCommand = value;
OnPropertyChanged(_SportsResponseCommandEventArgs);
}
}
static readonly PropertyChangedEventArgs _IsCheckedEventArgs = new PropertyChangedEventArgs("IsChecked");
private bool _IsChecked = false;
public bool IsChecked
{
get { return _IsChecked; }
set
{
_IsChecked = value;
OnPropertyChanged(_IsCheckedEventArgs);
}
}
#region INotifyPropertyChanged Members
public event PropertyChangedEventHandler PropertyChanged;
protected void OnPropertyChanged(PropertyChangedEventArgs eventArgs)
{
if (PropertyChanged != null)
{
PropertyChanged(this, eventArgs);
}
}
#endregion
}
Now you need a way to delegate your command “SportsResponseCommand”, DelegateCommand object will help you to do that
public class DelegateCommand : ICommand
{
private readonly Action<object> _ExecuteMethod;
private readonly Func< object, bool> _CanExecuteMethod;
#region Constructors
public DelegateCommand(Action<object>executeMethod, Func<object, bool> canExecuteMethod)
{
if (null == executeMethod)
{
throw new ArgumentNullException("executeMethod", "Delegate Command Delegates Cannot Be Null");
}
_ExecuteMethod = executeMethod;
_CanExecuteMethod = canExecuteMethod;
}
public DelegateCommand(Action<object>executeMethod) : this(executeMethod, null) { }
#endregion
#region Methods
public bool CanExecute(object parameter)
{
if (_CanExecuteMethod == null) return true;
return _CanExecuteMethod(parameter);
}
public void Execute(object parameter)
{
if (_ExecuteMethod == null) return;
_ExecuteMethod(parameter);
}
bool ICommand.CanExecute(object parameter)
{
return CanExecute(parameter);
}
public event EventHandler CanExecuteChanged
{
add { CommandManager.RequerySuggested += value; }
remove { CommandManager.RequerySuggested -= value; }
}
void ICommand.Execute(object parameter)
{
Execute(parameter);
}
#endregion
}
Now “ViewModel”
public class ViewModel
{
#region property
public Dictionary<string, Model_Sport> Sports { get; set; }
public DelegateCommand SportsResponseCommand { get; set; }
#endregion
public ViewModel()
{
Sports = new Dictionary<string, Model_Sport>();
SportsResponseCommand = new DelegateCommand(p => execute_SportsResponseCommand(p));
buildSports();
}
private void buildSports()
{
Model_Sport football = new Model_Sport("Football", SportsResponseCommand);
Model_Sport golf = new Model_Sport("Golf", SportsResponseCommand);
Model_Sport hockey = new Model_Sport("Hockey", SportsResponseCommand);
football.IsChecked = true; // just for test
Sports.Add(football.Name, football);
Sports.Add(golf.Name, golf);
Sports.Add(hockey.Name, hockey);
}
private void execute_SportsResponseCommand(object p)
{
// TODO :what ever you want
MessageBox.Show(p.ToString());
}
}
Now View
Remember to set datacontext for your Window
public MainWindow()
{
InitializeComponent();
this.DataContext = new ViewModel();
}
Then in XAML
<StackPanel HorizontalAlignment="Left" VerticalAlignment="Top" >
<CheckBox DataContext="{Binding Path=Sports[Football]}"
IsChecked="{Binding IsChecked, Mode=TwoWay}"
Command="{Binding Path=SportsResponseCommand}"
CommandParameter="Football"
Content="Football"
Margin="5" />
<CheckBox DataContext="{Binding Path=Sports[Hockey]}"
IsChecked="{Binding IsChecked, Mode=TwoWay}"
Command="{Binding Path=SportsResponseCommand}"
CommandParameter="Hockey"
Content="Hockey"
Margin="5" />
<CheckBox DataContext="{Binding Path=Sports[Golf]}" IsChecked="{Binding IsChecked, Mode=TwoWay}"
Command="{Binding Path=SportsResponseCommand}"
CommandParameter="Golf"
Content="Golf"
Margin="5" />
</StackPanel>

If you just want a property in your ViewModel to get updated when the IsChecked changes, replace the Binding for IsChecked to a boolean property in your ViewModel that raises NotifyPropertyChanged on its "set".
Now if you want to perform an action everytime IsChecked changes for one of the 3 CheckBoxes:
First of all, replace your CommandParameter with "{Binding RelativeSource={RelativeSource Mode=Self}}"
In your ViewModel (that should implement INotifyPropertyChanged), create an ICommand (SportsResponseCommand) that takes a CheckBox in parameter.
In the command's method, check for the Content of your CheckBox, and for the "IsChecked" property then do your stuff with them.
If you have further questions let me know.

You can assign a view model by using this
//for the view
partial class MainView:Window
{
InitializeComponent();
this.DataContext=new MainViewModel();
}
//ViewModel Code
public class MainViewModel: INotifyPropertyChanged
{
//INotifyPropertyChanged implementation
public event PropertyChangedEventHandler PropertyChanged;
protected virtual void OnPropertyChanged(string propertyName)
{
if (this.PropertyChanged != null)
this.PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
}
//bindable property
private bool _football;
public bool Football
{
get { return _football; }
set
{
if (value != _football)
{
_football = value;
this.OnPropertyChanged("Football");
}
}
}
//... and the same for Golf and Hockey
}`
and then you can implement Binding in XAML as
<CheckBox IsChecked="{Binding Football, Mode=TwoWay}"
Command="{Binding Path=SportsResponseCommand}"
CommandParameter="Football"
Content="Football"
Margin="5" />
<CheckBox IsChecked="{Binding Golf, Mode=TwoWay}"
Command="{Binding Path=SportsResponseCommand}"
CommandParameter="Football"
Content="Football"
Margin="5" />