I currently have an application that uses a ToggleButton/Popup feature and it all works as expected, but I wanted to see if there's a way (either through control templates or custom controls) that allows the toggle button to be included as part of the popup window.
The effect I'm going for is similar to the standard TabControl/TabItem layout but instead the ToggleButton would replace the header of the TabItem and the Popup would serve as it's content.
In the end, I want to have the Popup window display to the immediate right side of the ToggleButton and have one continuous border that wraps around the outside edges of the ToggleButton and the outside edges of the Popup window with no border inbetween. The final appearance would show no separation between the two controls, and the user would perceive the ToggleButton and the Popup as a single control object.
I was thinking it might be possible to edit a template of a standard TabItem and have it's content property display as a popup, but haven't tried it yet.
Let me know if you think this is the way to go or if there's any other potential solutions. Thanks.
Almost everything in WPF can be done in multiple ways. The same is true with your goal.
If you plan on reusing this control in multiple places, I would suggest building it as a custom control. I build custom controls and UI libraries for a living, so I am a bit biased.
I would build a custom control that inherits from HeaderedContentControl. The Header property is the content of your ToggleButton, and the Content property would be the content of your Popup. Since you own the ControlTemplate and code, you can make it look and function exactly how you need it to with no compromises.
Related
I am trying to achieve this look&feel in WPF.
It basically acts like a TabControl, with the tabs on the left (vertically)
The right side of the window completely changes depending on which item you have clicked on the left "nav bar":
Oculus UI
What I did:
I started doing a Custom Control. A grid with two columns, a StackPanel in the left column in which there will be a clickable button/label for every menu entry (vertically of course). A Property MenuEntries which is a List<string>.
How do I get the control to add a "tabpage" (a grid/canvas?) programmatically for every MenuEntry the user adds at design time?
How can I achieve the behavior of the TabControl during design time, i.e. the content on the right side changes as soon as the user clicks an item on the left (in the designer/editor)? (kind of like the TabControl itself?)
Is this the right approach or would you do that completely differently?
Yes, you can use TabControl for that, just set TabStripPlacement="Left", (some more details)
The whole rest: colors, margins etc is set via styles.
Also, to save you a lot of trouble, use MVVM (with some framework for WPF) for that. Set ViewModel collection as ItemsSource for the TabControl.
Then, when you select one of the tabs, the control will display the view for the selected VM.
DO NOT set TabItems in xaml for each tab, this is wrong way to go in the long run.
He I am a beginner to C# and I am working on a reaction manager plug-in for some bigger project. (Yes I am a intern)
Now I just can't find a way to create a view similar to this:
My full design:
How to realize this design? I cant find any default templates in the devexpress which are suitable for this. I come from php and in php I can use html. I am a beginner to C# and I don't have any clue on how t do this. Do I have to use canvas to literally draw this? OR is there a standard template I can use for this purpose.
You have many comment boxes that contain the same layout - a label comment text, author name, date, etc. There is no control that lays things out like that, you will have to make your own custom control (Project->Add User Control). This control will be a composite control - ie made up of other controls. Probably a label for each text field (comment, author, date, etc) laid out in the right places. Maybe call it CommentBox or something.
Then in the main form you now have available CommentBox controls which you can add to the form. Create a panel to put them in so you have many CommentBox controls in the panel, one for each comment (or maybe add them at runtime).
Now in WPF it's slightly easier because there is a StackPanel control that you can simply add controls to and it automatically arranges them vertically one beneath another in a stacked list. In fact your use case is exactly fitting what a StackPanel is for.
In WinForms there is no StackPanel, but you can use a normal Panel control*. It's just you'll have to position the CommentBox controls manually one beneath another. You will also need to set the AutoScroll property to true to turn on the vertical scroll bar if the content doesn't fit the view.
*or there's apparently an alternative How can I get a StackPanel-like layout in WinForms
I need to create a control which has a single permanent tab ("home"), and all of the other tabs are scrollable.
Right now I am trying to achieve this result by subclassing the TabControl, adding an extra button (which looks like a tab) to the overridden template, and setting the SelectedIndex to -1 whenever the button is clicked. When SelectedIndex is -1, a trigger causes the TabControl's ContentControl to be bound to a special "Home" tab's content. Basically, I am faking the behavior of a real tab and overriding the ability to deselect all tabs in doing so.
This seems to work, except for two problems:
Select example tab #3, then select home. THEN, try to select tab #3 again. Tab #3 doesn't respond.
Select tab #3, then select home. THEN, try to use the menu which happens to be in the same window. When I go to use the menu, #3 pops up as the selected tab again.
I've tried to listen to all kinds of events associated with the TabControl at this point, but none of them seem to give me something I can work with to get around these behaviors.
Is there something out there that will allow me to override the default SelectedIndex behavior? Should I be doing this another way? Ideally, I would like some way to take in a collection of tabs that allows me split up the tabs visually without losing the basic functionality of a TabControl.
The only way I can think of to accomplish this would be to use a custom ControlTemplate for the tab control. You can use StyleSnooper to get the current template. The that is part of that template would need to be replaced with a custom panel that you wrote. You base that on Panel. You would only need to override ArrangeOverride so that it arranged the Home tab in its place, and the others depending on the scroll position.
I was able to implement this by writing my own custom tab panel, as AresAvatar suggested. However, the panel needed to extend from the ConceptualPanel implementation from http://www.codeproject.com/KB/WPF/ConceptualChildren.aspx. The problem is that the panel needs to have IsItemsHost="true" in the TabControl template to preserve the tabs' selection behavior. Unfortunately, once a normal panel is an items host, it's Children can't be changed from inside it's own class code. So, I couldn't add the scroll buttons that I needed. I was able to get around that problem with the ConceptualPanel by adding everything (tabs + scroll buttons) via AddVisualChild.
There might be a better way to do this, but this worked for me.
Here's a screenshot of my application:
Basically, depending on what option is selected I'd like to show another 'content' which can be a buttons, or forms or whatever.
What would be the best choice for this? Using MDI? I'm really new to this type of thing.
This scenario lends itself well to tab pages, as you'd find on a TabControl.
However, since you already have a mechanism for switching between the content, you might prefer to create a series of Panels whose Dock property is set to DockStyle.Fill. When the user clicks the appropriate heading, you simply need to show the appropriate panel and call BringToFront() on it. This is essentially what the tab control does internally, anyway.
Don't forget to use SuspendLayout() and ResumeLayout() appropriately to reduce flicker, which can be a huge problem in WinForms applications, especially when there are lots of controls.
You can position a TabControl where the buttons are not visible and control it from your buttons.
I am attempting to create my own custom Autocomplete style dropdown control in c# .net2.0. For speed of development I have built my control as a UserControl but have hit on an issue of doing it this way.
When the custom drawn dropdown gets drawn I have to resize the UserControl area to be able to display the list of options.
Ideally I want to be able to mimic the drodpown list behaviour in that the list of options is drawn 'floating' and is not constrained by the UserControls height and width (nor even the parent forms boundaries). A tooltip is another example of the unconstrained 'floating' that I desire.
The only way I can think of achieving this is to create on the fly a new form with no border or title bar and display this when the popup is required.
Is there a better (but also quick) way of doing this?
TIA
You would need to use a Form or NativeWindow to allow the control to float correctly. To make a form follow the control is easy enough but it is more difficult to implement and handle all of the focusing/hiding issues especially if you need seamless tabbing/key navigation.
You can try creating a control that is based off the ToolStrip Drop Down Button control. I believe that this control has the functionality that you are looking for. I found this reference for creating controls based off the ToolStrip, you might try starting with this.
http://blogs.msdn.com/jfoscoding/attachment/1335869.ashx