I want to uninstall Windows Service from command prompt but that is not working getting below error
'installutil' is not recognized as an internal or external command,
operable program or batch file.
This way I have tried command
D:\backup\WindowsService\WindowsService1\WindowsService1\obj\Debug>installutil -u TestService.exe
D:\backup\WindowsService\WindowsService1\WindowsService1\obj\Debug>installutil -u "TestService.exe"
How can I uninstall service?
After your comment, your issue seems related to %PATH%.
There is no such thing as "installutil" on your Windows. I believe "installutil" has created by you right?
Let's assume that binary resides at C:\Myproject\installutil.exe
There are two ways to execute it.
First:
C:\users\username> cd C:\Myproject
C:\Myproject> .\installutil.exe -u "bla bla bla bla".
Second:
Go to your start menu and search for "environment". Open "Edit the system variables" under "System properties". At the "Advanced" tab, you'll see "Environment Variables". You'll see a variable named "Path". Edit it's value and add your own .exe path at the end.
When you execute "echo %PATH" at command prompt, you should see your binary's folder. Otherwise, command prompt will not be able to find it.
EDIT:
So yeah, there is one such thing called installutil.exe and it can be used by the Developer Command Prompt for Visual Studio.
Command to uninstall service: installutil -u "AirwatchService.exe"
Are you sure you're using the right command prompt? Do you have the absolute path of this binary?
Please check this: https://learn.microsoft.com/en-us/dotnet/framework/tools/installutil-exe-installer-tool
Related
When I tried to create dispatch-Model for my bot., I am getting following error - 'dispatch' is not recognized as an internal or external command, operable program or batch file.Before using dispatch command, I installed botdispatch using npm install -g botdispatch. But still I am getting this error.
Can you check your NPM folder to see if there is anything with dispatch there? Assuming you're on Windows, this is typically in AppData\Roaming\npm.
PowerShell:
dir $home\AppData\Roaming\npm
CMD:
dir %homepath%\AppData\Roaming\npm.
If dispatch (dispatch.cmd) is there, then it might be a pathing issue. Check your path variables to make sure that that path is there:
CMD:
echo %path%
PowerShell:
($env:path).Split(';')
So I was having this same issue, it turns out I needed to add the path of the NPM folder C:\Users\xxxxxx\AppData\Roaming\npm to my path for Powershell7.
$env:Path += ";C:\Users\xxxxxx\AppData\Roaming\npm"
Where xxxxxx is your userid. After adding this command to Powershell the npm modules began to work.
If you do not see this path by running this command below, then you need to add it with the one above.
($env:path).Split(';')
All of these should be ran inside of a PS7 window, I ran them with Administrator rights when I launched the Powershell 7 window.
I am trying to call tpmvscmgr.exe located in C:\Windows\System32
from my c# application.
I found this code:
string strCmdText;
strCmdText = #"/C Robocopy C:\Users\Johannes\test1 C:\Users\Johannes\test2";
System.Diagnostics.Process.Start("CMD.exe", strCmdText);
here Run Command Prompt Commands
and it works good.
However when I try to change it to
strCmdText = "/C Tpmvscmgr.exe create /name tpmvsc /pin default /adminkey random /generate ";
This does not work.
In fact when I debug and look around in the command prompt opened by the code I can not find the tpmvscmgr.exe in windows/system32.
Im guessing it is opened as a different user or with other priviledges or something but can this be fixed?
I really would need to run a tpmvscmgr.exe command from code.
OK I figured something out.
In my visual studio c# project I had "Any CPU" marked for the project. Apparently this means the console opens as win32.
When I changed the c# project to x86 I could run tpmvscmgr.exe
Pretty tricky stuff.
C# cmd prompt cannot see telnet.exe
Publishing ASP.NET MVC 4 application to IIS 8 on my machine giving the following error :
This access control list is not in canonical form and therefore cannot be modified.
I am under Windows 10 and using VS 2013 Ultimate.
I installed web deploy 3.5 from web platform installer 5, and I made sure that the services are working
Solution 1
I was able to solve this problem in the following way
Go to IIS
Right click on the website that you are publishing to and select Edit Permissions
Click the Security tab.
Click on Edit button
A Message box will appear which tell that the Permission was not correctly ordered.
Click Reorder on that message box.
Solution 2
Open the Command prompt (CMD) and execute the following two statements
icacls.exe C:\inetpub\wwwroot /verify /T /C /L /Q
icacls.exe C:\inetpub\wwwroot /reset /T /C /L /Q
note : Maybe you will want to open the CMD with Administrator privilege (Maybe I am not sure)
Cheers
You can run the following command to fix it
command prompt
icacls.exe C:\inetpub\wwwroot\<VIRTUAL DIRECTORY> /verify /T /C /L /Q
// If any entries are reported as being not in canonical order then run:
icacls.exe C:\inetpub\wwwroot\<VIRTUAL DIRECTORY> /reset /T /C /L /Q
Source
powershell
$path = C:\inetpub\wwwroot\<VIRTUAL DIRECTORY>
$acl = Get-Acl $path
Set-Acl $path $acl
Source
You can prevent this problem by modifying your Visual Studio package generation parameters: In the PropertyGroup section of your pubxml file, add
<IncludeSetACLProviderOnDestination>False</IncludeSetACLProviderOnDestination>
I am trying to run xxx.exe file using command prompt with silent mode. i saw this link in Google: http://www.powerware.com/Software/lansafe_help/LSHelp424.htm.
when i run this command : C:>"D:\xxx.exe" -r -f1"D:\Test.iss"
am getting error : "xxx.exe" is not recognized as an internal or external command operable program or batch file.
Can any body give the idea where i am doing mistake.
As others said, make sure your path to your exe file is correct. You can change directory where exe is before execution or write out the full path.
By silent mode if you mean to run exe without any output on screen, then simply redirect the output to a file.
E.g. if your exe is in D:\myprog\myprog.exe, then following command will make your program run in "silent" mode:
c:>"D:\myprog\myprog.exe" > "D:\myprog\output.txt"
Above example will dump output into output.txt file.
you have to run your command in which location EXE file is located. can you check whether its residing in d:?
You may switch over to the D:\ drive before running your command, but it shouldn't matter. Double check it actually exists in that location
I have a batch file that I have been using to install my C# Windows Services for awhile now, never had a problem until Windows 7. I have attempted to run the batch file with Administrator privileges. I have attempted to run the command prompt with admin privs, navigate to the windows service EXE and run InstallUtil there. Still doesn't work.
After reading some other suggestions I tried moving my files out of the /bin folder and running them from another location but that also didn't work.
The batch file looks like this
#ECHO OFF
REM The following directory is for .NET 2.0
set DOTNETFX2=%SystemRoot%\Microsoft.NET\Framework\v2.0.50727
set PATH=%PATH%;%DOTNETFX2%
echo Installing IEPPAMS Win Service...
echo ---------------------------------------------------
InstallUtil /i IEPPAMS_WinService1.exe
echo ---------------------------------------------------
echo Done.
and I have a install log file that I dump info to. If I just double click the .bat file I get
Running a transacted installation.
Beginning the Install phase of the
installation. See the contents of the
log file for the
C:\Users\Justin\Desktop\service
test\IEPPAMS_WinService1.exe
assembly's progress. The file is
located at
C:\Users\Justin\Desktop\service
test\IEPPAMS_WinService1.InstallLog.
An exception occurred during the
Install phase.
System.InvalidOperationException:
Cannot open Service Control Manager on
computer '.'. This operation might
require other privileges. The inner
exception
System.ComponentModel.Win32Exception
was thrown with the following error
message: Access is denied.
The Rollback phase of the installation
is beginning. See the contents of the
log file for the
C:\Users\Justin\Desktop\service
test\IEPPAMS_WinService1.exe
assembly's progress. The file is
located at
C:\Users\Justin\Desktop\service
test\IEPPAMS_WinService1.InstallLog.
The Rollback phase completed
successfully.
The transacted install has completed.
When I run the .bat file with admin privileges nothing is written to the log file, and the service is still not installed.
Any thoughts? Is there a new way to install services in Windows 7?
Right click on the batch file and run it as Administrator.
You are most likely running into battle with the new security model (User Account Control) from Windows Vista and Windows 7. Even if you are running as an account that has Admin rights you will still need to elevate to do some (most) administrative activities. (Yes it is possible to disable this feature, but don't)
UAC (MSDN)
UAC (Wikipedia)
InstallUtil (MSDN)
Edit... The correct commandline is InstallUtil YourApp.exe. The /i does not look to be a vaild switch for InstallUtil.
So I was able to fix the problem by typing in the command line the entire path to InstallUtil and it worked. So after navigating to the folder that had my EXE I typed the following:
C:\Windows\Microsoft.NET\Framework\v4.0.21006\installutil.exe
IEPPAMS_WinService1.exe
Not sure why I have to do that in Windows 7 now when I never had to in XP, but oh well. Thanks for all the suggestions!
When I run the .bat file with admin privileges nothing is written to the log file, and the service is still not installed.
First off, you HAVE to run as admin permissions.
Second, when you "Run as Administrator", it actually changes the directory to c:\windows\system32 as the initial directory ( no idea why ), which would probably explain why running as admin causes no log file. Manually change to the path IEPPAMS_WinService1.exe resides in that the start of your script.