I got this code:
static async Task AsynchronousProcessing()
{
Task<string> t1 = GetInfoAsync("Task 1", 3);
Task<string> t2 = GetInfoAsync("Task 2", 5);
string[] results = await Task.WhenAll(t1, t2);
foreach (string result in results)
{
WriteLine(result);
}
}
static async Task<string> GetInfoAsync(string name, int seconds)
{
await Task.Delay(TimeSpan.FromSeconds(seconds));
return "hi";
}
When reaching the line Task<string> t1 = GetInfoAsync("Task 1", 3);, will it already start asynchronously with the await Task.Delay(TimeSpan.FromSeconds(seconds)); and move on to the rest of the method, or will it return immediatly a task without actually starting it?
And if it won't start when calling the method, will the tasks start only when calling the Task.WhenAll(t1,t2)? Since if it doesn't start right away, I would expect to see GetInfoAsync doing something like return new Task<string>(() => ...);
I recommend reading my async intro.
In summary, all async methods begin executing synchronously. So when AsynchronousProcessing calls GetInfoAsync, then GetInfoAsync begins running, synchronously, just like any other method. An async method can become asynchronous when there is an await. In this case, GetInfoAsync calls Task.Delay (again, synchronously, just like a regular method call), and then passes its Task to await. At this point, await will examine the task; if it is already complete, then it will continue running synchronously; otherwise, it will act asynchronously and return an incomplete task from GetInfoAsync.
The tasks returned from async methods are in progress. I don't usually use the term "running", because they are not actually running code on a CPU and because the task status is not actually Running. This "asynchronous in-progress" state is unfortunately named WaitingForActivation (even though it's not waiting for anything).
Since if it doesn't start right away, I would expect to see GetInfoAsync doing something like return new Task(() => ...);
The async keyword handles the creation of the task. As noted above, the tasks are "hot" or "in progress". This is not the same as "running" or "started", both of which imply tasks that run CPU code. There are two types of tasks: what I call Delegate Tasks and Promise Tasks. The ones returned from async methods are Promise Tasks.
If there aren't any new threads with await, then how will they run in parallel?
They run concurrently (not in parallel, since there is no additional thread blocked on the delay).
However, when the await Task.Delay(..) completes, then there could possibly be another thread used. The await will resume on its captured context and execute the return "hi"; in that context. If the captured context is a thread pool context, then that one line of code will be executed on a thread pool thread. The async state machine translates the return into code that completes the task that was previously returned from that async method.
GetInfoAsync is called and runs synchronously just as usual until it hits the await Task.Delay(TimeSpan.FromSeconds(seconds)) line. It then returns an uncompleted task back to the calling AsynchronousProcessing() method.
So, yes, the task is indeed being started when you call the method, i.e. you don't have to await GetInfoAsync for the Task.Delay method to get called.
Related
I don't quite understand the difference between Task.Wait and await.
I have something similar to the following functions in a ASP.NET WebAPI service:
public class TestController : ApiController
{
public static async Task<string> Foo()
{
await Task.Delay(1).ConfigureAwait(false);
return "";
}
public async static Task<string> Bar()
{
return await Foo();
}
public async static Task<string> Ros()
{
return await Bar();
}
// GET api/test
public IEnumerable<string> Get()
{
Task.WaitAll(Enumerable.Range(0, 10).Select(x => Ros()).ToArray());
return new string[] { "value1", "value2" }; // This will never execute
}
}
Where Get will deadlock.
What could cause this? Why doesn't this cause a problem when I use a blocking wait rather than await Task.Delay?
Wait and await - while similar conceptually - are actually completely different.
Wait will synchronously block until the task completes. So the current thread is literally blocked waiting for the task to complete. As a general rule, you should use "async all the way down"; that is, don't block on async code. On my blog, I go into the details of how blocking in asynchronous code causes deadlock.
await will asynchronously wait until the task completes. This means the current method is "paused" (its state is captured) and the method returns an incomplete task to its caller. Later, when the await expression completes, the remainder of the method is scheduled as a continuation.
You also mentioned a "cooperative block", by which I assume you mean a task that you're Waiting on may execute on the waiting thread. There are situations where this can happen, but it's an optimization. There are many situations where it can't happen, like if the task is for another scheduler, or if it's already started or if it's a non-code task (such as in your code example: Wait cannot execute the Delay task inline because there's no code for it).
You may find my async / await intro helpful.
Based on what I read from different sources:
An await expression does not block the thread on which it is executing. Instead, it causes the compiler to sign up the rest of the async method as a continuation on the awaited task. Control then returns to the caller of the async method. When the task completes, it invokes its continuation, and execution of the async method resumes where it left off.
To wait for a single task to complete, you can call its Task.Wait method. A call to the Wait method blocks the calling thread until the single class instance has completed execution. The parameterless Wait() method is used to wait unconditionally until a task completes. The task simulates work by calling the Thread.Sleep method to sleep for two seconds.
This article is also a good read.
Some important facts were not given in other answers:
async/await is more complex at CIL level and thus costs memory and CPU time.
Any task can be canceled if the waiting time is unacceptable.
In the case of async/await we do not have a handler for such a task to cancel it or monitoring it.
Using Task is more flexible than async/await.
Any sync functionality can by wrapped by async.
public async Task<ActionResult> DoAsync(long id)
{
return await Task.Run(() => { return DoSync(id); } );
}
async/await generate many problems. We do not know if await statement will be reached without runtime and context debugging. If first await is not reached, everything is blocked. Sometimes even when await seems to be reached, still everything is blocked:
https://github.com/dotnet/runtime/issues/36063
I do not see why I must live with the code duplication for sync and async method or using hacks.
Conclusion: Creating Tasks manually and controlling them is much better. Handler to Task gives more control. We can monitor Tasks and manage them:
https://github.com/lsmolinski/MonitoredQueueBackgroundWorkItem
Sorry for my english.
What's the difference between starting and awaiting? Code below taken from Stephen Cleary's blog (including comments)
public async Task DoOperationsConcurrentlyAsync()
{
Task[] tasks = new Task[3];
tasks[0] = DoOperation0Async();
tasks[1] = DoOperation1Async();
tasks[2] = DoOperation2Async();
// At this point, all three tasks are running at the same time.
// Now, we await them all.
await Task.WhenAll(tasks);
}
I thought that the tasks begin running when you await them ... but the comments in the code seem to imply otherwise.
Also, how can the tasks be running after I just attributed them to an array of type Task. Isn't that just an attribution, by nature not involving action?
A Task returns "hot" (i.e. already started). await asynchronously waits for the Task to complete.
In your example, where you actually do the await will affect whether the tasks are ran one after the other, or all of them at the same time:
await DoOperation0Async(); // start DoOperation0Async, wait for completion, then move on
await DoOperation1Async(); // start DoOperation1Async, wait for completion, then move on
await DoOperation2Async(); // start DoOperation2Async, wait for completion, then move on
As opposed to:
tasks[0] = DoOperation0Async(); // start DoOperation0Async, move on without waiting for completion
tasks[1] = DoOperation1Async(); // start DoOperation1Async, move on without waiting for completion
tasks[2] = DoOperation2Async(); // start DoOperation2Async, move on without waiting for completion
await Task.WhenAll(tasks); // wait for all of them to complete
Update
"doesn't await make an async operation... behave like sync, in this example (and not only)? Because we can't (!) run anything else in parallel with DoOperation0Async() in the first case. By comparison, in the 2nd case DoOperation0Async() and DoOperation1Async() run in parallel (e.g. concurrency,the main benefits of async?)"
This is a big subject and a question worth being asked as it's own thread on SO as it deviates from the original question of the difference between starting and awaiting tasks - therefore I'll keep this answer short, while referring you to other answers where appropriate.
No, awaiting an async operation does not make it behave like sync; what these keywords do is enabling developers to write asynchronous code that resembles a synchronous workflow (see this answer by Eric Lippert for more).
Calling await DoOperation0Async() will not block the thread executing this code flow, whereas a synchronous version of DoOperation0 (or something like DoOperation0Async.Result) will block the thread until the operation is complete.
Think about this in a web context. Let's say a request arrives in a server application. As part of producing a response to that request, you need to do a long-running operation (e.g. query an external API to get some value needed to produce your response). If the execution of this long-running operation was synchronous, the thread executing your request would block as it would have to wait for the long-running operation to complete. On the other hand, if the execution of this long-running operation was asynchronous, the request thread could be freed up so it could do other things (like service other requests) while the long-running operation was still running. Then, when the long-running operation would eventually complete, the request thread (or possibly another thread from the thread pool) could pick up from where it left off (as the long-running operation would be complete and it's result would now be available) and do whatever work was left to produce the response.
The server application example also addresses the second part of your question about the main benefits of async - async/await is all about freeing up threads.
Isn't that just an attribution, by nature not involving action?
By calling the async method you execute the code within. Usually down the chain one method will create a Task and return it either by using return or by awaiting.
Starting a Task
You can start a Task by using Task.Run(...). This schedules some work on the Task Thread Pool.
Awaiting a Task
To get a Task you usually call some (async) Method that returns a Task. An async method behaves like a regular method until you await (or use Task.Run() ). Note that if you await down a chain of methods and the "final" method only does a Thread.Sleep() or synchronous operation - then you will block the initial calling thread, because no method ever used the Task's Thread Pool.
You can do some actual asynchronous operation in many ways:
using Task.Run
using Task.Delay
using Task.Yield
call a library that offers asynchronous operations
These are the ones that come to my mind, there are probably more.
By example
Let's assume that Thread ID 1 is the main thread where you are calling MethodA() from. Thread IDs 5 and up are Threads to run Tasks on (System.Threading.Tasks provides a default Scheduler for that).
public async Task MethodA()
{
// Thread ID 1, 0s passed total
var a = MethodB(); // takes 1s
// Thread ID 1, 1s passed total
await Task.WhenAll(a); // takes 2s
// Thread ID 5, 3s passed total
// When the method returns, the SynchronizationContext
// can change the Thread - see below
}
public async Task MethodB()
{
// Thread ID 1, 0s passed total
Thread.Sleep(1000); // simulate blocking operation for 1s
// Thread ID 1, 1s passed total
// the await makes MethodB return a Task to MethodA
// this task is run on the Task ThreadPool
await Task.Delay(2000); // simulate async call for 2s
// Thread ID 2 (Task's pool Thread), 3s passed total
}
We can see that MethodA was blocked on the MethodB until we hit an await statement.
Await, SynchronizationContext, and Console Apps
You should be aware of one feature of Tasks. They make sure to invoke back to a SynchronizationContext if one is present (basically non-console apps). You can easily run into a deadlock when using .Result or .Wait() on a Task if the called code does not take measures. See https://blogs.msdn.microsoft.com/pfxteam/2012/01/20/await-synchronizationcontext-and-console-apps/
async/await as syntactic sugar
await basically just schedules following code to run after the call was completed. Let me illustrate the idea of what is happening behind the scenes.
This is the untransformed code using async/await. The Something method is awaited, so all following code (Bye) will be run after Something completed.
public async Task SomethingAsync()
{
Hello();
await Something();
Bye();
}
To explain this I add a utility class Worker that simply takes some action to run and then notify when done.
public class Worker
{
private Action _action;
public event DoneHandler Done;
// skipping defining DoneHandler delegate
// store the action
public Worker(Action action) => _action = action;
public void Run()
{
// execute the action
_action();
// notify so that following code is run
Done?.Invoke();
}
}
Now our transformed code, not using async/await
public Task SomethingAsync()
{
Hello(); // this remains untouched
// create the worker to run the "awaited" method
var worker = new Worker(() => Something());
// register the rest of our method
worker.Done += () => Bye();
// execute it
worker.Run();
// I left out the part where we return something
// or run the action on a threadpool to keep it simple
}
Here's the short answer:
To answer this you just need to understand what the async / await keywords do.
We know a single thread can only do one thing at a time and we also know that a single thread bounces all over the application to various method calls and events, ETC. This means that where the thread needs to go next is most likely scheduled or queued up somewhere behind the scenes (it is but I won't explain that part here.) When a thread calls a method, that method is ran to completion before any other methods can be ran which is why long running methods are preferred to be dispatched to other threads to prevent the application from freezing. In order to break a single method up into separate queues we need to do some fancy programming OR you can put the async signature on the method. This tells the compiler that at some point the method can be broken up into other methods and placed in a queue to be ran later.
If that makes sense then you're already figuring out what await does... await tells the compiler that this is where the method is going to be broken up and scheduled to run later. This is why you can use the async keyword without the await keyword; although the compiler knows this and warns you. await does all this for you by use of a Task.
How does await use a Task tell the compiler to schedule the rest of the method? When you call await Task the compilers calls the Task.GetAwaiter() method on that Task for you. GetAwaiter() return a TaskAwaiter. The TaskAwaiter implements two interfaces ICriticalNotifyCompletion, INotifyCompletion. Each has one method, UnsafeOnCompleted(Action continuation) and OnCompleted(Action continuation). The compiler then wraps the rest of the method (after the await keyword) and puts it in an Action and then it calls the OnCompleted and UnsafeOnCompleted methods and passes that Action in as a parameter. Now when the Task is complete, if successful it calls OnCompleted and if not it calls UnsafeOnCompleted and it calls those on the same thread context used to start the Task. It uses the ThreadContext to dispatch the thread to the original thread.
Now you can understand that neither async or await execute any Tasks. They simply tell the compiler to use some prewritten code to schedule all of it for you. In fact; you can await a Task that's not running and it will await until the Task is executed and completed or until the application ends.
Knowing this; lets get hacky and understand it deeper by doing what async await does manually.
Using async await
using System;
using System.Threading.Tasks;
namespace Question_Answer_Console_App
{
class Program
{
static void Main(string[] args)
{
Test();
Console.ReadKey();
}
public static async void Test()
{
Console.WriteLine($"Before Task");
await DoWorkAsync();
Console.WriteLine($"After Task");
}
static public Task DoWorkAsync()
{
return Task.Run(() =>
{
Console.WriteLine($"{nameof(DoWorkAsync)} starting...");
Task.Delay(1000).Wait();
Console.WriteLine($"{nameof(DoWorkAsync)} ending...");
});
}
}
}
//OUTPUT
//Before Task
//DoWorkAsync starting...
//DoWorkAsync ending...
//After Task
Doing what the compiler does manually (sort of)
Note: Although this code works it is meant to help you understand async await from a top down point of view. It DOES NOT encompass or execute the same way the compiler does verbatim.
using System;
using System.Threading.Tasks;
namespace Question_Answer_Console_App
{
class Program
{
static void Main(string[] args)
{
Test();
Console.ReadKey();
}
public static void Test()
{
Console.WriteLine($"Before Task");
var task = DoWorkAsync();
var taskAwaiter = task.GetAwaiter();
taskAwaiter.OnCompleted(() => Console.WriteLine($"After Task"));
}
static public Task DoWorkAsync()
{
return Task.Run(() =>
{
Console.WriteLine($"{nameof(DoWorkAsync)} starting...");
Task.Delay(1000).Wait();
Console.WriteLine($"{nameof(DoWorkAsync)} ending...");
});
}
}
}
//OUTPUT
//Before Task
//DoWorkAsync starting...
//DoWorkAsync ending...
//After Task
LESSON SUMMARY:
Note that the method in my example DoWorkAsync() is just a function that returns a Task. In my example the Task is running because in the method I use return Task.Run(() =>…. Using the keyword await does not change that logic. It's exactly the same; await only does what I mentioned above.
If you have any questions just ask and I'll be happy to answer them.
With starting you start a task. That means it might be picked up for execution by whatever Multitasaking system is in place.
With waiting, you wait for one task to actually finish before you continue.
There is no such thing as a Fire and Forget Thread. You always need to come back, to react to exceptions or do somethings with the result of the asynchronous operation (Database Query or WebQuery result, FileSystem operation finished, Dokument send to the nearest printer pool).
You can start and have as many task running in paralell as you want. But sooner or later you will require the results before you can go on.
I don't quite understand the difference between Task.Wait and await.
I have something similar to the following functions in a ASP.NET WebAPI service:
public class TestController : ApiController
{
public static async Task<string> Foo()
{
await Task.Delay(1).ConfigureAwait(false);
return "";
}
public async static Task<string> Bar()
{
return await Foo();
}
public async static Task<string> Ros()
{
return await Bar();
}
// GET api/test
public IEnumerable<string> Get()
{
Task.WaitAll(Enumerable.Range(0, 10).Select(x => Ros()).ToArray());
return new string[] { "value1", "value2" }; // This will never execute
}
}
Where Get will deadlock.
What could cause this? Why doesn't this cause a problem when I use a blocking wait rather than await Task.Delay?
Wait and await - while similar conceptually - are actually completely different.
Wait will synchronously block until the task completes. So the current thread is literally blocked waiting for the task to complete. As a general rule, you should use "async all the way down"; that is, don't block on async code. On my blog, I go into the details of how blocking in asynchronous code causes deadlock.
await will asynchronously wait until the task completes. This means the current method is "paused" (its state is captured) and the method returns an incomplete task to its caller. Later, when the await expression completes, the remainder of the method is scheduled as a continuation.
You also mentioned a "cooperative block", by which I assume you mean a task that you're Waiting on may execute on the waiting thread. There are situations where this can happen, but it's an optimization. There are many situations where it can't happen, like if the task is for another scheduler, or if it's already started or if it's a non-code task (such as in your code example: Wait cannot execute the Delay task inline because there's no code for it).
You may find my async / await intro helpful.
Based on what I read from different sources:
An await expression does not block the thread on which it is executing. Instead, it causes the compiler to sign up the rest of the async method as a continuation on the awaited task. Control then returns to the caller of the async method. When the task completes, it invokes its continuation, and execution of the async method resumes where it left off.
To wait for a single task to complete, you can call its Task.Wait method. A call to the Wait method blocks the calling thread until the single class instance has completed execution. The parameterless Wait() method is used to wait unconditionally until a task completes. The task simulates work by calling the Thread.Sleep method to sleep for two seconds.
This article is also a good read.
Some important facts were not given in other answers:
async/await is more complex at CIL level and thus costs memory and CPU time.
Any task can be canceled if the waiting time is unacceptable.
In the case of async/await we do not have a handler for such a task to cancel it or monitoring it.
Using Task is more flexible than async/await.
Any sync functionality can by wrapped by async.
public async Task<ActionResult> DoAsync(long id)
{
return await Task.Run(() => { return DoSync(id); } );
}
async/await generate many problems. We do not know if await statement will be reached without runtime and context debugging. If first await is not reached, everything is blocked. Sometimes even when await seems to be reached, still everything is blocked:
https://github.com/dotnet/runtime/issues/36063
I do not see why I must live with the code duplication for sync and async method or using hacks.
Conclusion: Creating Tasks manually and controlling them is much better. Handler to Task gives more control. We can monitor Tasks and manage them:
https://github.com/lsmolinski/MonitoredQueueBackgroundWorkItem
Sorry for my english.
I don't quite understand the difference between Task.Wait and await.
I have something similar to the following functions in a ASP.NET WebAPI service:
public class TestController : ApiController
{
public static async Task<string> Foo()
{
await Task.Delay(1).ConfigureAwait(false);
return "";
}
public async static Task<string> Bar()
{
return await Foo();
}
public async static Task<string> Ros()
{
return await Bar();
}
// GET api/test
public IEnumerable<string> Get()
{
Task.WaitAll(Enumerable.Range(0, 10).Select(x => Ros()).ToArray());
return new string[] { "value1", "value2" }; // This will never execute
}
}
Where Get will deadlock.
What could cause this? Why doesn't this cause a problem when I use a blocking wait rather than await Task.Delay?
Wait and await - while similar conceptually - are actually completely different.
Wait will synchronously block until the task completes. So the current thread is literally blocked waiting for the task to complete. As a general rule, you should use "async all the way down"; that is, don't block on async code. On my blog, I go into the details of how blocking in asynchronous code causes deadlock.
await will asynchronously wait until the task completes. This means the current method is "paused" (its state is captured) and the method returns an incomplete task to its caller. Later, when the await expression completes, the remainder of the method is scheduled as a continuation.
You also mentioned a "cooperative block", by which I assume you mean a task that you're Waiting on may execute on the waiting thread. There are situations where this can happen, but it's an optimization. There are many situations where it can't happen, like if the task is for another scheduler, or if it's already started or if it's a non-code task (such as in your code example: Wait cannot execute the Delay task inline because there's no code for it).
You may find my async / await intro helpful.
Based on what I read from different sources:
An await expression does not block the thread on which it is executing. Instead, it causes the compiler to sign up the rest of the async method as a continuation on the awaited task. Control then returns to the caller of the async method. When the task completes, it invokes its continuation, and execution of the async method resumes where it left off.
To wait for a single task to complete, you can call its Task.Wait method. A call to the Wait method blocks the calling thread until the single class instance has completed execution. The parameterless Wait() method is used to wait unconditionally until a task completes. The task simulates work by calling the Thread.Sleep method to sleep for two seconds.
This article is also a good read.
Some important facts were not given in other answers:
async/await is more complex at CIL level and thus costs memory and CPU time.
Any task can be canceled if the waiting time is unacceptable.
In the case of async/await we do not have a handler for such a task to cancel it or monitoring it.
Using Task is more flexible than async/await.
Any sync functionality can by wrapped by async.
public async Task<ActionResult> DoAsync(long id)
{
return await Task.Run(() => { return DoSync(id); } );
}
async/await generate many problems. We do not know if await statement will be reached without runtime and context debugging. If first await is not reached, everything is blocked. Sometimes even when await seems to be reached, still everything is blocked:
https://github.com/dotnet/runtime/issues/36063
I do not see why I must live with the code duplication for sync and async method or using hacks.
Conclusion: Creating Tasks manually and controlling them is much better. Handler to Task gives more control. We can monitor Tasks and manage them:
https://github.com/lsmolinski/MonitoredQueueBackgroundWorkItem
Sorry for my english.
I don't quite understand the difference between Task.Wait and await.
I have something similar to the following functions in a ASP.NET WebAPI service:
public class TestController : ApiController
{
public static async Task<string> Foo()
{
await Task.Delay(1).ConfigureAwait(false);
return "";
}
public async static Task<string> Bar()
{
return await Foo();
}
public async static Task<string> Ros()
{
return await Bar();
}
// GET api/test
public IEnumerable<string> Get()
{
Task.WaitAll(Enumerable.Range(0, 10).Select(x => Ros()).ToArray());
return new string[] { "value1", "value2" }; // This will never execute
}
}
Where Get will deadlock.
What could cause this? Why doesn't this cause a problem when I use a blocking wait rather than await Task.Delay?
Wait and await - while similar conceptually - are actually completely different.
Wait will synchronously block until the task completes. So the current thread is literally blocked waiting for the task to complete. As a general rule, you should use "async all the way down"; that is, don't block on async code. On my blog, I go into the details of how blocking in asynchronous code causes deadlock.
await will asynchronously wait until the task completes. This means the current method is "paused" (its state is captured) and the method returns an incomplete task to its caller. Later, when the await expression completes, the remainder of the method is scheduled as a continuation.
You also mentioned a "cooperative block", by which I assume you mean a task that you're Waiting on may execute on the waiting thread. There are situations where this can happen, but it's an optimization. There are many situations where it can't happen, like if the task is for another scheduler, or if it's already started or if it's a non-code task (such as in your code example: Wait cannot execute the Delay task inline because there's no code for it).
You may find my async / await intro helpful.
Based on what I read from different sources:
An await expression does not block the thread on which it is executing. Instead, it causes the compiler to sign up the rest of the async method as a continuation on the awaited task. Control then returns to the caller of the async method. When the task completes, it invokes its continuation, and execution of the async method resumes where it left off.
To wait for a single task to complete, you can call its Task.Wait method. A call to the Wait method blocks the calling thread until the single class instance has completed execution. The parameterless Wait() method is used to wait unconditionally until a task completes. The task simulates work by calling the Thread.Sleep method to sleep for two seconds.
This article is also a good read.
Some important facts were not given in other answers:
async/await is more complex at CIL level and thus costs memory and CPU time.
Any task can be canceled if the waiting time is unacceptable.
In the case of async/await we do not have a handler for such a task to cancel it or monitoring it.
Using Task is more flexible than async/await.
Any sync functionality can by wrapped by async.
public async Task<ActionResult> DoAsync(long id)
{
return await Task.Run(() => { return DoSync(id); } );
}
async/await generate many problems. We do not know if await statement will be reached without runtime and context debugging. If first await is not reached, everything is blocked. Sometimes even when await seems to be reached, still everything is blocked:
https://github.com/dotnet/runtime/issues/36063
I do not see why I must live with the code duplication for sync and async method or using hacks.
Conclusion: Creating Tasks manually and controlling them is much better. Handler to Task gives more control. We can monitor Tasks and manage them:
https://github.com/lsmolinski/MonitoredQueueBackgroundWorkItem
Sorry for my english.