I've recently purchased the essentials email package from GoDaddy and I am trying to set up sending email from my website via SMTP. I have the following code set up.
var smtp = new SmtpClient
{
Host = "mycoolwebsite.com.mail.protection.outlook.com",
Port = 25,
DeliveryMethod = SmtpDeliveryMethod.Network,
UseDefaultCredentials = false,
Credentials = new NetworkCredential("info#mycoolwebsite.com", "supersecurepassword")
};
using (var message = new MailMessage("info#mycoolwebsite.com", "myemail#test.com")
{
IsBodyHtml = true,
Subject = subject,
Body = body
})
{
smtp.Send(message);
}
This gets to send and doesn't throw any exceptions, however the email is not sent. I am very confused at why this doesn't work.
Has anyone got any ideas?
This is going to require TLS which means using MailKit's SMTP. You can get it using the NuGet package manager in Visual Studio. Search for MailKit by Jeffrey Stedfast.
Documentation is here as well.
Once you have all the references in place, use the MailKit.Net.Smtp.SmtpClient class:
Set "smtp.office365.com" as your host
Use port 587.
You will need to add this line after creating your smtp instance because you have no OAuth token:
smtp.AuthenticationMechanisms.Remove("XOAUTH2");
That will do what you need.
Here's an example of what the whole thing should look like:
string FromPseudonym = "MySite Support";
string FromAddress = "admin#MySite.com";
var message = new MimeMessage();
message.From.Add(new MailboxAddress(FromPseudonym, FromAddress));
message.To.Add(new MailboxAddress("Recipient Pseudonym", "RecipientAddress#somewhere.com"));
message.Subject = "Testing Email";
var bodyBuilder = new BodyBuilder();
string MsgBody = "Message Body stuff goes here";
bodyBuilder.HtmlBody = MsgBody;
message.Body = bodyBuilder.ToMessageBody();
using (var client = new SmtpClient())
{
client.Connect("smtp.office365.com", 587);
client.AuthenticationMechanisms.Remove("XOAUTH2");
client.Authenticate(FromAddress, "Your super secret password goes here");
client.Send(message);
client.Disconnect(true);
}
You'll need the following namespaces to be included:
using MimeKit;
using MimeKit.Utils;
using MailKit.Net.Smtp;
I've been where you are before. If you are running the app from your dev environment, the emails will not be sent. GoDaddy SMTP is configured so that emails will only be sent when requested from within their environment.
If you push the code to their host and run it, it will work. The most painful thing about this is that everything appears to go smoothly, but the SMTP client just eats the request and leaves you wondering why no email is sent.
Not knowing anything about GoDaddy's API, the only thing I can suggest, is maybe verify that the port is correct. It might require transport layer security, in which case port 25 will be closed.
For example, I think the office365 SMTP server (smtp.office365.com) requires secure SMTP and uses port 587.
Related
I am trying to send an email via SmtpClient ("smtp.office365.com") and am running into issues.
Consider the following code snippet:
var fromAddress = new MailAddress("someone#example.com", "TestFrom");
var toAddress = new MailAddress("someoneto#example.com", "TestSend");
string fromPassword = "SomePassword";
var smtp = new SmtpClient
{
Host = "smtp.office365.com",
Port = 587,
EnableSsl = true,
DeliveryMethod = SmtpDeliveryMethod.Network,
UseDefaultCredentials = false,
Credentials = new NetworkCredential(fromAddress.Address, fromPassword)
};
using (var message = new MailMessage(fromAddress, toAddress)
{
Subject = "Hey There Did this Test Work?",
Body = "Hey There Did this Test Work?",
IsBodyHtml = true,
})
smtp.Send(message);
This code works correctly from a .Net console application.
I can also use the same credentials and send an email via PowerShell.
When I attempt to use the same code snippet in an Asp.Net application, it fails.
I've tried this with the application deployed locally and to Azure.
I get the same results.
I get the following exceptions:
Failure sending mail. Unable to read data from the transport
connection: net_io_connectionclosed.
I am told that used to work correctly at some point previous to the past 3 months.
Am I doing something wrong here? Are there additional configuration settings I should be using? Does Asp.Net require something to bet set up (locally and within Azure) in order for this to work?
Thx
We had similar issues sending emails and it turned out that it was because we weren't enforcing TLS 1.2. You can enforce it with following code:
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls12;
You only need call it once in your application, so Application_Start callback in global.asax is one possible place to put it.
I have a task to troubleshoot why a C# app is failing to send automated e-mail messages. I carefully checked the source code, and could find absolutely nothing wrong.
Therefore, I tried to send e-mail from Thunderbird, the e-mail client I normally use. I specified the same SMTP relay, the same UID and password, and everything worked fine.
Trying to isolate the problem, I tried writing a very short C# console app to see what might be going wrong. I wrote the following:
using System.Net;
using System.Net.Mail;
namespace ConsoleApp3
{
class Program
{
static void Main(string[] args)
{
var client = new SmtpClient("my.server.with.ssl", 465);
client.EnableSsl = true;
client.Credentials = new NetworkCredential("uid", "pwd");
var message = new MailMessage("me#example.com", "myemail#mydomain", "Test Message Subject", "Test Message Body");
client.Send(message);
}
}
}
I entered the same credentials that I used in Thunderbird. When I run the above, I get the following error:
Unhandled Exception: System.Net.Mail.SmtpException: Failure sending mail. ---> System.IO.IOException: Unable to read data from the transport connection: net_io_connectionclosed.
How can it be that e-mail is sent just fine from Thunderbird, but the simple programming above fails to work when I try to send an e-mail from a basic C# app?
Edit I tried changing the port number to 587 as suggested in the Question that #stuartd linked to, and in that case, I get an error that says The operation timed out.
Edit I've tried using other e-mail servers and adjusting the settings, but nothing works so far. I've tried connecting to the same SMTP server that I use for my personal e-mail and it shows an error that the connection times out.
Edit I can't say why, but everything seems to be working now in spite of the fact that I didn't change any code. It seems as if something odd happened with my connection.
try using the default constructor and specify the host only.
Also some servers require that the client be authenticated before the server sends e-mail on its behalf. Try changing the value of UseDefaultCredentials
var mail = new MailMessage();
mail.From = new MailAddress("xxx#gmx.net");
mail.To.Add("yyy#gmail.com");
mail.IsBodyHtml = true;
mail.Subject = "subject";
mail.Body = "content";
var client = new SmtpClient();
client.UseDefaultCredentials = false;
client.Host = "mail.gmx.net";
client.EnableSsl = true;
client.Credentials = new NetworkCredential("user", "pass");
client.Send(mail);
if that doesn't help than tell us the server name if its the public one
Try using:
SmtpClient smtpClient = new SmtpClient("mail.mymailhost.com");
smtpClient.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
I couldn't send mail using smtp ASPMX.L.GOOGLE.COM. I have domain domain.co.in and email address test#domain.co.in which is accessible in gmail. i Could send mail manually but not programmatically. throws below error.
Service not available, closing transmission channel. The server response was: 4.7.0 [61.16.142.134 15] Our system has detected that this message is
MailAddress ma_from = new MailAddress("test#domain.co.in", "fromName");
MailAddress ma_to = new MailAddress("jrao.XXXX#gmail.com", "fromName");
string s_password = "TestPwd";
string s_subject = "Test";
string s_body = "This is a Test";
SmtpClient smtp = new SmtpClient
{
Host = "ASPMX.L.GOOGLE.COM",
Port = 25,
EnableSsl = true,
DeliveryMethod = SmtpDeliveryMethod.Network,
UseDefaultCredentials = false,
Credentials = new NetworkCredential(ma_from.Address, s_password)
};
using (MailMessage mail = new MailMessage(ma_from, ma_to)
{
Subject = s_subject,
Body = s_body
})
smtp.Send(mail);
Where did you get those settings? I don't think port 25 will work with SSL. Try port 587 and host "smtp.gmail.com"
The full response from Google would help. Was it perhaps "Our system has detected an unusual rate of unsolicited mail originating from your IP address. To protect our users from spam, mail sent from your IP address has been temporarily rate limited." Note that unless you're using a fixed-line internet connection from home, you're probably sharing an IP address with many other users.
Ensure you have a "strong" password
Ensure the "from" email address is your primary email address and not an alias.
Try Using Port 587
And host "smtp.gmail.com"
Specially You'll need to set your gmail account allow less secure apps to send mails. It's a security concern in gmail.
You can set this setting by folowing this link.
Allow Less Secure Apps
Hope this would help.. :)
I'm working on an ASP.NET Web Forms app and I'm trying to programmatically send an email to myself. I'm using Gmail's SMTP client, and all is well except that when I send my message, I get this error:
"System.Net.Mail.SmtpException: The SMTP server requires a secure
connection or the client was not authenticated. The server response
was: 5.5.1 Authentication Required. Learn more at"
If I go into my gmail account settings and enable an option that allows me to allow access for "less secure apps", everything works fine. I'm wondering how I can send my email with having this option enabled.
protected void sendEmail(object sender, EventArgs e)
{
var client = new SmtpClient("smtp.gmail.com", 587)
{
Credentials = new System.Net.NetworkCredential("myusername#gmail.com", "mypassword"),
DeliveryMethod = SmtpDeliveryMethod.Network,
EnableSsl = true
};
MailAddress from = new MailAddress("myusername#gmail.com", "Torchedmuffinz");
MailAddress to = new MailAddress("myusername#gmail.com", "Torchedmuffinz");
MailMessage message = new MailMessage(from, to);
message.Subject = "test";
message.Body = "test";
Attachment attachFile = new Attachment(#"pathtofile");
message.Attachments.Add(attachFile);
try { client.Send(message); }
catch (Exception email_exception)
{
System.Diagnostics.Debug.WriteLine(email_exception);
}
}
Gmail port 587 does not support SSL.
I think the following code should work for you.
MailMessage msg = new MailMessage();
msg.From=new MailAddress("yourmail#gmail.com");
msg.To.Add("receiver#receiverdomain.com");
msg.Subject="Your Subject";
msg.Body="Message content is going to be here";
msg.IsBodyHtml=false; //if you are going to send an html content, you have to make this true
SmtpClient client = new SmtpClient("smtp.gmail.com");
client.Port=587;
NetworkCredential credential=new NetworkCredential("yourmail#gmail.com","your gmail password");
client.UseDefaultCredentials=false;
client.Credentials=credential;
client.Send(msg);
There is a possibility to use Google SMTP servers without 'Allow less secure apps' option, but you cannot use your standard google username and password. See my instructions on other post:
Is there a way to use ASP.NET to send email through a Google Apps acccount without selecting the 'Allow less secure apps' option?
I have read other answers on the stackoverflow. but none of the solutions work for me.
I'm trying to send email through live.com, but unable to it.
The error message:
mailbox unavailable. The server response was: 5.7.3 requested action aborted;
user not authenticated
or error message:
System.Net.Mail.SmtpException: Service not available,
closing transmission channel.
The server response was: Cannot connect to SMTP server 65.55.176.126
(65.55.176.126:587), NB connect error 1460
The code:
MailMessage mail = new MailMessage();
mail.From = new MailAddress("email#live.com");
mail.To.Add("someone#someone.com");
mail.Subject = "hello";
mail.Body = "awefkljj kawefl";
mail.IsBodyHtml = false;
SmtpClient smtp = new SmtpClient("smtp.live.com", 587);
smtp.EnableSsl = true;
smtp.Credentials = new NetworkCredential("email#live.com", "password");
smtp.Send(mail);
Are you able to send the email by using above code?
It works before, last year, but it is no more working now.
I'm not sure what has been changed to live.com email server.
What new settings or parameters should apply?
I ran into an issue where I was unable to send emails using the smtp.live.com SMTP server from certain hosts -- particulary Azure hosts. In my case, the SMTP attempt was from a host that I had never used to sign-in previously, so the attempt was blocked with the 5.7.3 error:
Mailbox unavailable. The server response was: 5.7.3 requested action aborted; user not authenticated
The solution was to browse to the account settings, locate the SMTP request in its recent activity, and select "This was me":
Tested and it works (different host address and a few other property set):
using (var client = new SmtpClient("smtp-mail.outlook.com")
{
Port = 587,
DeliveryMethod = SmtpDeliveryMethod.Network,
UseDefaultCredentials = false,
EnableSsl = true,
Credentials = new NetworkCredential(_sender, _password)
})
{
using (var mail = new MailMessage(_sender, _recipient)
{
Subject = _subject,
Body = _message
})
{
client.Send(mail);
}
}
Also, if the account has two-step verification turned on, you'll have to generate an app password and use that instead.
Your code works for me without any changes with a live.com address. I am able to generate the same exception by simply putting an incorrect password.
I would suggest following checks:
Did the user change password recently? Are you able to login with the credentials provided over the web interface?
if yes, does your program uses the exact same credentials? please note that white space can be your enemy.