Develop Reference

How to add data after xml in c# and read the xml after?

I've got to create a file with xml header and after that i have to put normal data, smthing like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Header>
<Algorithm>alg</Algorithm>
<nod2>aaa</nod2>
<nod3>bbb</nod3>
<node>
<User>
<Email />
<SessionKey />
</User>
</node>
</Header>
Data of the file....
I've already got the code to write it to the file.
Code for that part:
private void setHeader(FileStream output, string nod2, string nod3, string )
{
XmlDocument doc = new XmlDocument();
XmlNode docNode = doc.CreateXmlDeclaration("1.0", "UTF-8", "yes");
doc.AppendChild(docNode);
XmlNode header = doc.CreateElement("Header");
doc.AppendChild(header);
XmlNode algorithm = doc.CreateElement("Algorithm");
algorithm.InnerText = "alg";
header.AppendChild(algorithm);
XmlNode node2= doc.CreateElement("nod2");
node2.InnerText = nod2;
header.AppendChild(node2);
XmlNode node3= doc.CreateElement("nod3");
node3.InnerText = nod3;
header.AppendChild(node3);
XmlNode node= doc.CreateElement("node");
header.AppendChild(node);
XmlNode user1 = doc.CreateElement("User");
node.AppendChild(user1);
XmlNode mail = doc.CreateElement("Email");
user1.AppendChild(mail);
XmlNode sessionKey = doc.CreateElement("SessionKey");
user1.AppendChild(sessionKey);
doc.Save(output);
}
It work's pretty well, but when i want to read it with
private void readHeader(FileStream input, out string algorithm)
{
XmlDocument doc = new XmlDocument();
doc.Load(input);
}
I got an error that when the "Data of the file..." starts: "Data on the root level is invalid".
Is there a way to do it with the data after whole xml, or have i to add the data as a node?

This can be done in multiple ways. In comments, you've indicated that the best way is unacceptable for reasons outside the scope of the discussion. For completeness, I'm going to put that one first anyway. Skip down to tl;dr for what I think you'll have to end up doing.
The preferred way to do this is to base64 encode the encrypted data and put it in a CDATA block:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<File>
<Header>
<Algorithm>alg</Algorithm>
<nod2>aaa</nod2>
<nod3>bbb</nod3>
<node>
<User>
<Email />
<SessionKey />
</User>
</node>
</Header>
<Data><![CDATA[
ICAgIFhtbE5vZGUgYWxnb3JpdGhtID0gZG9jLkNyZWF0ZUVsZW1lbnQoIkFsZ29yaXRobSIpOw0K
ICAgIGFsZ29yaXRobS5Jbm5lclRleHQgPSAiYWxnIjsNCiAgICBoZWFkZXIuQXBwZW5kQ2hpbGQo
YWxnb3JpdGhtKTsNCiAgICBYbWxOb2RlIG5vZGUyPSBkb2MuQ3JlYXRlRWxlbWVudCgibm9kMiIp
Ow0KICAgIG5vZGUyLklubmVyVGV4dCA9IG5vZDI7DQogICAgaGVhZGVyLkFwcGVuZENoaWxkKG5v
ZGUyKTsNCiAgICBYbWxOb2RlIG5vZGUzPSBkb2MuQ3JlYXRlRWxlbWVudCgibm9kMyIpOw0KICAg
IG5vZGUzLklubmVyVGV4dCA9IG5vZDM7DQogICAgaGVhZGVyLkFwcGVuZENoaWxkKG5vZGUzKTs=
]]></Data>
</File>
That's the canonical answer to this question.
But you've told me that in your case, a requirement has been imposed that you can't do it that way.
Second choice is MIME (actually, MIME might be the first choice and the above might be the second). But I have a feeling they won't like MIME either.
Third choice, read the file as a string and search for some marker that's inserted between the XML and the binary data, something like a MIME boundary.
tl;dr
If they won't let you add such a marker to the file (and I bet they won't), search for the first occurrence of the substring "</Header>":
var xml = File.ReadAllText(filePath);
var endTag = "</Header>";
var headerXML = xml.Substring(0, xml.IndexOf(endTag) + endTag.Length);
var xdHeader = new XmlDocument();
xdHeader.LoadXml(headerXML);

I tested your code with writing directly to a file, doc.Save(#"c:\temp\test1.xml");
And loading from that file works fine. So there is nothing wrong with your xml document. Check your FileStream. Do you flush and close it properly? Does it have UTF-8 encoding?
What's the input in the node strings. Nothing that is invalid according to xml rules?

After a single root node, only comments and processor instructions can be written to xml. So, you can try to write your data in the comments.
It will look like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Header>
...
</Header>
<!-- your data -->
<!-- another data -->
This method has limitations: your data may not contain -- (double-hyphen) and may not end in -.
But it is better, of course, not to do so.

Issue with loading xml in C# containing google kml

I am trying to access the second element in this xml (google kml type) of file and the issue I am having is I get returned null values for my code unless I remove out the <kml xmlns="http://earth.google.com/kml/2.0"> and the related close from the source file. Here is the code I'm using. (mind you this works if I remove the specified line so what I'm looking for is a clean way to process this file without editing the supplied source file.)
XmlDocument doc = new XmlDocument();
doc.Load("2014_q2.xml");
XmlNodeList xnlNodes = doc.SelectNodes("/kml/Document/Folder");
var Node2Use = xnlNodes.Item(1);
here is the top of the source file:
<?xml version="1.0" encoding="UTF-8"?>
<kml xmlns="http://earth.google.com/kml/2.0">
<Document>
<open>1</open>
<Folder>
<name>Pts_2014_q3_point Drawing</name>
<Placemark>
<description>HOLTSVILLE</description>
<name>00501</name>
<Style>
<IconStyle>
<color>ffc0c0c0</color>
I have a break on the var Node2Use = xnlNodes.Item(1); line so I can see the contents and thats where I see that I have a zero value where I should have 2 for Folder (like mentioned I get the 2 when I remove out that kml tagged line.)

You need to include the namespace. Something like this:
XmlDocument doc = new XmlDocument();
doc.Load("2014_q2.xml");
XNamespace ns = "http://earth.google.com/kml/2.0";
XmlNodeList xnlNodes = doc.SelectNodes(ns + "/kml/Document/Folder");

Append XMLDocument to other

I have following two xml strings
<?xml version="1.0"?>
<AccessRequest xml:lang='en-US'>
<AccessLicenseNumber>YOURACCESSLICENSENUMBER</AccessLicenseNumber>
<UserId>YOURUSERID</UserId>
<Password>YOURPASSWORD</Password>
</AccessRequest>
and
<?xml version="1.0" ?>
<RatingServiceSelectionRequest>
<PickupType>
<Code>01</Code>
</PickupType>
<Shipment>
<Description>Rate </Description>
<Shipper>
<Address>
<PostalCode>originzip</PostalCode>
</Address>
</Shipper>
<ShipTo>
<Address>
<PostalCode>destinationzip</PostalCode>
<CountryCode>countrycode</CountryCode>
</Address>
</ShipTo>
<Service>
<Code>11</Code>
</Service>
<Package>
<PackagingType>
<Code>02</Code>
<Description>Package</Description>
</PackagingType>
<Description>Rate Shopping</Description>
<PackageWeight>
<Weight>weight</Weight>
</PackageWeight>
</Package>
<ShipmentServiceOptions/>
</Shipment>
</RatingServiceSelectionRequest>
I want to append second xml string to first one. I tried writing both XmlDocuments to a XmlWriter. But it throws exception "Cannot write XML declaration. XML declaration can be only at the beginning of the document."
Stream stm = req.GetRequestStream();
XmlDocument doc1 = new XmlDocument();
XmlDocument doc2 = new XmlDocument();
doc1.LoadXml(xmlData1);
doc2.LoadXml(xmlData2);
XmlWriterSettings xws = new XmlWriterSettings();
xws.ConformanceLevel = ConformanceLevel.Fragment;
using (XmlWriter xw = XmlWriter.Create(stm, xws))
{
doc1.WriteTo(xw);
doc2.WriteTo(xw);
}
How can I append it as is? Please help

Remove <?xml version="1.0" ?> from second xml string before appending it to first xml string.

I had this problem in the past. The two lines of code below did the job:
var MyDoc = XDocument.Load("File1.xml");
MyDoc.Root.Add(XDocument.Load("File2.xml").Root.Elements());
If you already have strings ready, then please use the Parse function instead of Load.
Please notice I am using the System.Xml.Linq that uses XDocument instead of XmlDocument class.
EDIT
As I understood, you need both documents to be concatenated as is. The problem is that it will eventually leads to an invalid XML document for two reasons :
the document will contain two root nodes: AccessRequest and RatingServiceSelectionRequest. A valid XML document contains only one root node.
There must be only one <?xml version="1.0" ?> XML declaration at the beginning of a document.
If the UPS api your are using is fed with an invalid XML, you unfortunately can not use XML objects. Therefore you will have to use a simple string concatenation to achieve what you want:
var xml = xmlData1 + xmlData2;

Why XDocument can't get element out of this wellform XML text?

I'm trying to get the value of the Address element from the following XML text, but it's not finding it unless I remove xmlns="http://www.foo.com" from the Root element. However, the XML is valid even with it. What's the problem here?
Since I'm getting the XML text from a web service, I don't have control over it, but I can strip out the xmlns part if I have to as the last resort.
<?xml version="1.0" encoding="utf-8"?>
<Root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.foo.com">
<Address>Main St SW</Address>
</Root>
var doc = XDocument.Parse(xmlTextAbove);
var address = doc.Descendants().Where(o => o.Name == "Address").FirstOrDefault();
Console.WriteLine(address.Value); // <-- error, address is null.

As your xml contains a namespace, you have to mention that in code. This will work:
XNamespace nsSys = "http://www.foo.com";
XElement xDoc = XElement.Load("1.xml");
XElement xEl2 = xDoc.Descendants(nsSys + "Address").FirstOrDefault();
However I had to change your xml a little bit, as it contained repeated xmlns:xsi and xmlns:xsd which should occur only once per xml format:
<?xml version="1.0" encoding="utf-8"?>
<Root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.foo.com" >
<Address>Main St SW</Address>
</Root>
Related article in MSDN: XNamespace Class

The document root's XML namespace is included in the textual representation of o.Name, which is actually an instance of XName so the condition never matches.
The easiest fix is to use LocalName for the comparison:
.Where(o => o.Name.LocalName == "Address")

Reading contents of XML file without having to remove the XML declaration

I want to read all XML contents from a file. The code below only works when the XML declaration (<?xml version="1.0" encoding="UTF-8"?>) is removed. What is the best way to read the file without removing the XML declaration?
XmlTextReader reader = new XmlTextReader(#"c:\my path\a.xml");
reader.Read();
string rs = reader.ReadOuterXml();
Without removing the XML declaration, reader.ReadOuterXml() returns an empty string.
<?xml version="1.0" encoding="UTF-8"?>
<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:a="http://www.w3.org/2005/08/addressing">
<s:Header>
<a:Action s:mustUnderstand="1">http://www.as.com/ver/ver.IClaimver/Car</a:Action>
<a:MessageID>urn:uuid:b22149b6-2e70-46aa-8b01-c2841c70c1c7</a:MessageID>
<ActivityId CorrelationId="16b385f3-34bd-45ff-ad13-8652baeaeb8a" xmlns="http://schemas.microsoft.com/2004/09/ServiceModel/Diagnostics">04eb5b59-cd42-47c6-a946-d840a6cde42b</ActivityId>
<a:ReplyTo>
<a:Address>http://www.w3.org/2005/08/addressing/anonymous</a:Address>
</a:ReplyTo>
<a:To s:mustUnderstand="1">http://localhost/ver.Web/ver2011.svc</a:To>
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Car xmlns="http://www.as.com/ver">
<carApplication>
<HB_Base xsi:type="HB" xmlns="urn:core">
<Header>
<Advisor>
<AdvisorLocalAuthorityCode>11</AdvisorLocalAuthorityCode>
<AdvisorType>1</AdvisorType>
</Advisor>
</Header>
<General>
<ApplyForHB>yes</ApplyForHB>
<ApplyForCTB>yes</ApplyForCTB>
<ApplyForFSL>yes</ApplyForFSL>
<ConsentSupplied>no</ConsentSupplied>
<SupportingDocumentsSupplied>no</SupportingDocumentsSupplied>
</General>
</HB_Base>
</carApplication>
</Car>
</s:Body>
</s:Envelope>
Update
I know other methods that use NON-xml reader (e.g. by using File.ReadAllText()). But I need to know a way that uses an xml method.

There can be no text or whitespace before the <?xml ?> encoding declaration other than a BOM, and no text between the declaration and the root element other than line break.
Anything else is an invalid document.
UPDATE:
I think your expectation of XmlTextReader.read() is incorrect.
Each call to XmlTextReader.Read() steps through the next "token" in the XML document, one token at a time. "Token" means XML elements, whitespace, text, and XML encoding declaration.
Your call to reader.ReadOuterXML() is returning an empty string because the first token in your XML file is an XML declaration, and an XML declaration does not have an OuterXML.
Consider this code:
XmlTextReader reader = new XmlTextReader("test.xml");
reader.Read();
Console.WriteLine(reader.NodeType); // XMLDeclaration
reader.Read();
Console.WriteLine(reader.NodeType); // Whitespace
reader.Read();
Console.WriteLine(reader.NodeType); // Element
string rs = reader.ReadOuterXml();
The code above produces this output:
XmlDeclaration
Whitespace
Element
The first "token" is the XML declaration.
The second "token" encountered is the line break after the XML declaration.
The third "token" encountered is the <s:Envelope> element. From here a call to reader.ReadOuterXML() will return what I think you're expecting to see - the text of <s:Envelope> element, which is the entire soap packet.
If what you really want is to load the XML file into memory as objects, just call
var doc = XDocument.Load("test.xml")
and be done with the parsing in one fell swoop.
Unless you're working with an XML doc that is so monstrously huge that it won't fit in system memory, there's really not a lot of reason to go poking through the XML document one token at a time.

What about
XmlDocument doc=new XmlDocument;
doc.Load(#"c:\my path\a.xml");
//Now we have the XML document - convert it to a String
//There are many ways to do this, one should be:
StringWriter sw=new StringWriter();
doc.Save(sw);
String finalresult=sw.ToString();

EDIT: I'm assuming you mean you actually have text between the document declaration and the root element. If that's not the case, please clarify.
Without removing the extra text, it's simply an invalid XML file. I wouldn't expect it to work. You don't have an XML file - you have something a bit like an XML file, but with extraneous stuff before the root element.

IMHO you can't read this file. It's because there's a plain text before the root element <s:Envelope> which makes whole document invalid.

You're parsing an XML document as XML just to obtain the source text? Why?
If you really want to do that then:
string rs;
using(var rdr = new StreamReader(#"c:\my path\a.xml"))
rs = rdr.ReadToEnd();
Will work, but I'm really not sure that is what you actually want. This pretty much ignores that it's XML and just reads the text. Useful for some things, but not a lot.