EF core 2.1 select/distinct - c#

I'm using sql profiler to see sql generated by Ef core2.1,
this is my linq query :
var resulat = (from a in A
join b in B equals a.level=b.level
where ...
select new M1 {AId = a.id}).Distinct();
(from r in resulat
join c in C equals r.AId = c.AId
select new M2
{
CId = c.Id,
level = _helper(c.level)
}).Distinct();
Sql generated:
select t.AId,c.Id,c.level
from
(
select distinct a.id
from A a
inner join B b on a.level=b.level
where ...
) as t
inner join C c on t.AId = c.AId
What i want as result is :
select distinct c.Id,c.level
from
(
select distinct a.id
from A a
inner join B b on a.level=b.level
where ...
) as t
inner join C c on t.AId = c.AId
I have tried also using select/distinct with result IQueryable, but the sql generated is the same.
what i missed in my linq query or what i have to add to have this sql query


That's what worked for me:
Delete Distinct() from result query, this avoid adding t.AId to my selection.
Delete a helper method from one of my selection fields performe adding Distinct() to final query.
This is my query after correction:
var resulat = from a in A
join b in B equals a.level=b.level
where ...
select new M1 {AId = a.id};
(from r in resulat
join c in C equals r.AId = c.AId
select new M2
{
CId = c.Id
level = c.level
}).Distinct();
Many thanks for your comments, it really helped me.


I'm always a fan of querying the data you want directly from the table (well, DbSet) that returns the data. The process looks a bit like these steps:
I want C.Id and C.Level
That's context.Cs.
Which Cs do I want?
The ones that have a parent A, of which at least one B has the same 'level' as A and meets a couple of other criteria (the where ...).
That amounts to:
from c in context.Cs
where context.Bs.Any(b => b.level == c.A.level && <other criteria>)
select new { c.Id, c.Level }
If the where ... also contains filter criteria for A you can add predicates like && c.A == ... to the where.
Note that I assume a navigation property c.A to be present, otherwise to be created, because C has AId.

Related

how to access table from embedded where LINQ c#

Please note below is entirely made up for example sake. I have a similar query based on an sql code but couldn't translate it to LINQ to get correct value.
The sql basically looks like this:
select * from customers c
join proucts p on c.id = p.customerid
join credit r on r.customerid=c.id and ISNULL(r.trandate, c.registeredDate) >= c.registeredDate
I also tried to tweak the above sql and put the condition inside where and it also returns the same value I am getting in my #2 LINQ below(which is incorrect).
How can I use c (customer) inside .Where of credit? see code
1.
from c in customers
join p in products on c.id = p.customerid
join cr in credit.Where(r=> r.tranDate => c.registeredDate!=null?c.registeredDate : r.purchaseDate) on c.id=cr.customerid
...
2.
I know you would suggest why not just put it in a where below like below but I am getting incorrect value.
from c in customers
join p in products on c.id = p.customerid
join cr in credit on c.id=cr.customerid
where r.tranDate => c.registeredDate!=null?c.registeredDate : r.purchaseDate
Is there a workaround? I have tried tons of others but won't get me the correct one.

LINQ supports only equijoins. Any additional criteria should go to where clause. And yes, the other range variables are inaccessible from the join inner sequence, so the filtering should happen before or after the join.
So this SQL query:
select * from customers c
join products p on c.id = p.customerid
join credit r on r.customerid = c.id
and ISNULL(r.trandate, c.registeredDate) >= c.registeredDate
directly translates to this LINQ query:
from c in customers
join p in products on c.id equals p.customerid
join cr in credit on c.id equals cr.customerid
where (cr.tranDate ?? c.registeredDate) >= c.registeredDate
select new { c, p, cr };
Optionally, the condition
(cr.tranDate ?? c.registeredDate) >= c.registeredDate
can be replaced with
(cr.tranDate == null || cr.tranDate >= c.registeredDate)

LINQ Join with multiple AND conditions

I want to join two entities in my MVC application for data Processing through the LINQ join.
For that I am trying to write the query like,
from enumeration in db.Enumerations
join cust in db.Customers on ( enumeration.Value equals cust.lkpStatus &&
enumeration.EnumerationTypeID.Contains('Cust')
But I am getting Problem with this Query, So please give me some suggestion on this.

Join should be made like this:
var joinQuery =
from t1 in Table1
join t2 in Table2
on new { t1.Column1, t1.Column2 } equals new { t2.Column1, t2.Column2 }
...

Try this solution:
from enumeration in db.Enumerations.Where(e =>
e.EnumerationTypeID.Contains('Cust'))
join cust in db.Customers on enumeration.Value equals cust.lkpStatus
select enumeration;

This one?
var data = from c in db.Enumerations
from d in db.Customers
where c.Value.Equals(d.lkpStatus)
&& c.EnumerationTypeID.Contains('Cust')
select c;

This works
var data = from c in db.Enumerations from d in db.Customers where c.Value==d.lkpStatus && c.EnumerationTypeID.Contains('Cust') select c;

LINQ to Entites join on ID or null

I have a LINQ to Entities statement that joins two models on an AlphaGroupID, like this:
IEnumerable<ICD.ViewModels.HomeSearchViewModel> ICDList = (from a in ICDUnitOfWork.AlphaGroups.Find()
join e in ICDUnitOfWork.Alphas.Find()
on a.AlphaGroupID equals e.AlphaGroupID)
I need to join the two tables on AlphaGroupID, but I also need all of the ICDUnitOfWork.AlphaGroups regardless of whether or not they have a corresponding AlphaGroupID in ICDList. How can I accomplish this?

Use join into (it is same as GroupJoin):
var query = from a in ICDUnitOfWork.AlphaGroups.Find()
join e in ICDUnitOfWork.Alphas.Find()
on a.AlphaGroupID equals e.AlphaGroupID into g
select new { AlphaGroup = a, Alphas = g };
GroupJoin produces hierarchical result - for each item in outer sequence will be generated sequence of corresponding items in inner sequence (sequence could be empty).

Access all of the data after joining two tables and group them using linq

I have two tables
TableA
aId
aValue
TableB
bId
aId
bValue
I want to join these two tables via aId, and from there, group them by bValue
var result =
from a in db.TableA
join b in db.TableB on a.aId equals b.aId
group b by b.bValue into x
select new {x};
My code doesn't recognize the join after the group. In other words, the grouping works, but the join doesn't (or at least I can't figure out how to access all of the data after the join).

The expression between the group and the by creates the group elements.
var result =
from a in db.TableA
join b in db.TableB on a.aId equals b.aId
group new {A = a, B = b} by b.bValue;
// demonstration of navigating the result
foreach(var g in result)
{
Console.WriteLine(g.Key);
foreach(var x in g)
{
Console.WriteLine(x.A.aId);
Console.WriteLine(x.B.bId);
}
}

Your result object will be an IQueryable<IGrouping<T>>, so you'd have to access one of the results collection, which will be IGrouping<T>, and then dig into that collection to get the x objects.

What is the syntax for an inner join in LINQ to SQL?

I'm writing a LINQ to SQL statement, and I'm after the standard syntax for a normal inner join with an ON clause in C#.
How do you represent the following in LINQ to SQL:
select DealerContact.*
from Dealer
inner join DealerContact on Dealer.DealerID = DealerContact.DealerID

It goes something like:
from t1 in db.Table1
join t2 in db.Table2 on t1.field equals t2.field
select new { t1.field2, t2.field3}
It would be nice to have sensible names and fields for your tables for a better example. :)
Update
I think for your query this might be more appropriate:
var dealercontacts = from contact in DealerContact
join dealer in Dealer on contact.DealerId equals dealer.ID
select contact;
Since you are looking for the contacts, not the dealers.

And because I prefer the expression chain syntax, here is how you do it with that:
var dealerContracts = DealerContact.Join(Dealer,
contact => contact.DealerId,
dealer => dealer.DealerId,
(contact, dealer) => contact);

To extend the expression chain syntax answer by Clever Human:
If you wanted to do things (like filter or select) on fields from both tables being joined together -- instead on just one of those two tables -- you could create a new object in the lambda expression of the final parameter to the Join method incorporating both of those tables, for example:
var dealerInfo = DealerContact.Join(Dealer,
dc => dc.DealerId,
d => d.DealerId,
(dc, d) => new { DealerContact = dc, Dealer = d })
.Where(dc_d => dc_d.Dealer.FirstName == "Glenn"
&& dc_d.DealerContact.City == "Chicago")
.Select(dc_d => new {
dc_d.Dealer.DealerID,
dc_d.Dealer.FirstName,
dc_d.Dealer.LastName,
dc_d.DealerContact.City,
dc_d.DealerContact.State });
The interesting part is the lambda expression in line 4 of that example:
(dc, d) => new { DealerContact = dc, Dealer = d }
...where we construct a new anonymous-type object which has as properties the DealerContact and Dealer records, along with all of their fields.
We can then use fields from those records as we filter and select the results, as demonstrated by the remainder of the example, which uses dc_d as a name for the anonymous object we built which has both the DealerContact and Dealer records as its properties.

var results = from c in db.Companies
join cn in db.Countries on c.CountryID equals cn.ID
join ct in db.Cities on c.CityID equals ct.ID
join sect in db.Sectors on c.SectorID equals sect.ID
where (c.CountryID == cn.ID) && (c.CityID == ct.ID) && (c.SectorID == company.SectorID) && (company.SectorID == sect.ID)
select new { country = cn.Name, city = ct.Name, c.ID, c.Name, c.Address1, c.Address2, c.Address3, c.CountryID, c.CityID, c.Region, c.PostCode, c.Telephone, c.Website, c.SectorID, Status = (ContactStatus)c.StatusID, sector = sect.Name };
return results.ToList();

You create a foreign key, and LINQ-to-SQL creates navigation properties for you. Each Dealer will then have a collection of DealerContacts which you can select, filter, and manipulate.
from contact in dealer.DealerContacts select contact
or
context.Dealers.Select(d => d.DealerContacts)
If you're not using navigation properties, you're missing out one of the main benefits on LINQ-to-SQL - the part that maps the object graph.

Use Linq Join operator:
var q = from d in Dealer
join dc in DealerConact on d.DealerID equals dc.DealerID
select dc;

basically LINQ join operator provides no benefit for SQL. I.e. the following query
var r = from dealer in db.Dealers
from contact in db.DealerContact
where dealer.DealerID == contact.DealerID
select dealerContact;
will result in INNER JOIN in SQL
join is useful for IEnumerable<> because it is more efficient:
from contact in db.DealerContact
clause would be re-executed for every dealer
But for IQueryable<> it is not the case. Also join is less flexible.

Actually, often it is better not to join, in linq that is. When there are navigation properties a very succinct way to write your linq statement is:
from dealer in db.Dealers
from contact in dealer.DealerContacts
select new { whatever you need from dealer or contact }
It translates to a where clause:
SELECT <columns>
FROM Dealer, DealerContact
WHERE Dealer.DealerID = DealerContact.DealerID

Inner join two tables in linq C#
var result = from q1 in table1
join q2 in table2
on q1.Customer_Id equals q2.Customer_Id
select new { q1.Name, q1.Mobile, q2.Purchase, q2.Dates }

Use LINQ joins to perform Inner Join.
var employeeInfo = from emp in db.Employees
join dept in db.Departments
on emp.Eid equals dept.Eid
select new
{
emp.Ename,
dept.Dname,
emp.Elocation
};

Try this :
var data =(from t1 in dataContext.Table1 join
t2 in dataContext.Table2 on
t1.field equals t2.field
orderby t1.Id select t1).ToList();

OperationDataContext odDataContext = new OperationDataContext();
var studentInfo = from student in odDataContext.STUDENTs
join course in odDataContext.COURSEs
on student.course_id equals course.course_id
select new { student.student_name, student.student_city, course.course_name, course.course_desc };
Where student and course tables have primary key and foreign key relationship

try instead this,
var dealer = from d in Dealer
join dc in DealerContact on d.DealerID equals dc.DealerID
select d;

var Data= (from dealer in Dealer join dealercontact in DealerContact on dealer.ID equals dealercontact.DealerID
select new{
dealer.Id,
dealercontact.ContactName
}).ToList();

var data=(from t in db.your tableName(t1)
join s in db.yourothertablename(t2) on t1.fieldname equals t2.feldname
(where condtion)).tolist();

var list = (from u in db.Users join c in db.Customers on u.CustomerId equals c.CustomerId where u.Username == username
select new {u.UserId, u.CustomerId, u.ClientId, u.RoleId, u.Username, u.Email, u.Password, u.Salt, u.Hint1, u.Hint2, u.Hint3, u.Locked, u.Active,c.ProfilePic}).First();
Write table names you want, and initialize the select to get the result of fields.

from d1 in DealerContrac join d2 in DealerContrac on d1.dealearid equals d2.dealerid select new {dealercontract.*}

One Best example
Table Names : TBL_Emp and TBL_Dep
var result = from emp in TBL_Emp join dep in TBL_Dep on emp.id=dep.id
select new
{
emp.Name;
emp.Address
dep.Department_Name
}
foreach(char item in result)
{ // to do}

Categories

Resources