I am developing in C#.
I have a text file containing the following:
Sam
NYC
Mii
Peru
LEO
Argentina
I want to iterate through this file two line by two line, then print to the console the first line, second line (the Name and the Country) of each couple, so the output would be:
Sam, NYC
Mii, Peru
Here is what I have tried:
int linenum = 0;
foreach (string line in File.ReadLines("c:\\file.txt"))
{
string word = line;
string s = "";
string j = "";
linenum = linenum + 1;
if(linenum % 2 != 0) //impaire
{
s = line;
}
else
{
j = line;
}
Console.WriteLine((string.Concat(s, j));
}
But that's not working, I want to do:
int linenum = 0;
foreach( two lines in File.ReadLines("c:\\file.txt"))
{
linenum = linenum + 1;
//get the first line (linenum = 1) and store it in a string s
// then get the second line (linenum = 2) and store it in a string j
// then print the two strings together to the console like that
Console.WriteLine((string.Concat("S: " + s,"J: " j));
}
How can I do that ?
Use File.ReadAllLines to return an array of strings:
var lines = File.ReadAllLines(filePath);
for (int i = 0; i < lines.Length; i+=2)
{
var s = lines[i];
var j = lines[i+1];
Console.WriteLine($"S: {s} J: {s}");
}
You do your output with Console.WriteLine in every line, but you also should do that only for every second line. Furthermore, your variables s and j live inside the loop's scope, so they are recreated with every iteration and loose their prior value.
int i = 0; string prev = "";
foreach (string line in File.ReadLines("c:\\file.txt")) {
if (i++ % 2 == 0) prev = line;
else Console.WriteLine($"{prev}, {line}");
}
Another approach would be iterating the array you get from File.ReadAllLines with an for loop instead of foreach and increase the index by 2
var lines = File.ReadAllLines("c:\\file.txt");
//make sure, you have an even number of lines!
if (lines.Length% 2 == 0) for (int i = 0; i < lines.Length; i+=2) {
Console.WriteLine($"{lines[i]}, {lines[i+1]}");
}
You can write yourself a little helper method to return batches of lines.
This implementation handles files that are not a multiple of the batch size (2 in your case) by returning "" for the missing lines at the end of the file.
public static IEnumerable<string[]> BatchedLinesFromFile(string filename, int batchSize)
{
string[] result = Enumerable.Repeat("", batchSize).ToArray();
int count = 0;
foreach (var line in File.ReadLines(filename))
{
result[count++] = line;
if (count != batchSize)
continue;
yield return result;
count = 0;
result = Enumerable.Repeat("", batchSize).ToArray();
}
if (count > 0)
yield return result;
}
Note that this also returns a separate array for each result, in case you make a copy of it.
Given that code, you can use it like so:
foreach (var batch in BatchedLinesFromFile(filename, 2))
{
Console.WriteLine(string.Join(", ", batch));
}
Actually, you can use LINQ to get two lines in a time using Take
var twoLines = File.ReadLines(#"YourPath").Take(2));
As you can use Skip to skip the two lines you took and take the next two lines like :
var twoLines = File.ReadLines(#"YourPath").Skip(2).Take(2));
EDIT : Thanks for #derpirscher there were a performance issue so changed the code to the following :
first read the whole file and store it in a string array
then loop through it using LINQ to take two elements from the array in a time.
string[] myStringArray = File.ReadAllLines(#"YourFile.txt");
for (int i = 0; i < myStringArray.Length ; i+=2)
{
var twoLines = myStringArray.Skip(i).Take(2).ToArray();
}
Another one, using Enumerable.Repeat() and an interger selector incremented a [NumberOfLines / 2] times.
Could be interesting for the LINQ addicted (a for / foreach solution is probably better anyway).
string[] input = File.ReadAllLines([SourcePath]);
int Selector = -1;
string[] output = Enumerable.Repeat(0, input.Length / 2).Select(_ => {
Selector += 2;
return $"{input[Selector - 1]} {input[Selector]}";
}).ToArray();
The output is:
Sam NYC
Mii Peru
LEO Argentina
Use the right tool for the job. foreach() is not the right tool here.
Without giving up the memory efficiency of ReadLines() over ReadAll():
using (var lines = File.ReadLines("c:\\file.txt").GetEnumerator())
{
while (lines.MoveNext())
{
string firstLine = lines.Current;
if (!lines.MoveNext())
throw new InvalidOperationException("odd nr of lines");
string secondLine = lines.Current;
// use 2 lines
Console.WriteLine("S: " + firstLine ,"J: " + secondLine);
}
}
Related
Hi i want to search for character in a string array but i need to search Between 2 indices. For example between index 2 and 10. How can I do that?
foreach (var item in currentline[2 to 10])
{
if (item == ',' || item == ';')
{
c++;
break;
}
else
{
data += item;
c++;
}
}
As you can see, foreach enumerates over a collection or any IEnumerable.
As the comments say, you can use a for loop instead, and pick out the elements you want.
Alternatively, since you want to search for a character in a string, you can use IndexOf, using the start index and count overload to find where a character is.
As there is no use of the c++ in your code I will assume that it's a vestige of code.
You can simply addess your issue like this:
In the currentline
Take char from index 2 to 10
Till you find a char you don't want.
concatenate the resulting char array to a string.
Resulting Code:
var data = "##";//01234567891 -- index for the string below.
var currentline= "kj[abcabc;z]Selected data will be between: '[]';";
var exceptChar = ",;";
data += new string(
input.Skip(3)
.Take(8)
.TakeWhile(x=> !exceptChar.Contains(x))
.ToArray()
);
There is a string method called string.IndexOfAny() which will allow you to pass an array of characters to search for, a start index and a count. For your example, you would use it like so:
string currentLine = ",;abcde;,abc";
int index = currentLine.IndexOfAny(new[] {',', ';'}, 2, 10-2);
Console.WriteLine(index);
Note that the last parameter is the count of characters to search starting at the specified index, so if you want to start at index 2 and finish at index 10, the count will be finish-start, i.e. 10-2.
You can search for characters in strings and get their indexes with this LINQ solution:
string str = "How; are, you; Good ,bye";
char[] charArr = { ',', ';' };
int startIndex = 2;
int endIndex = 10;
var indexes = Enumerable.Range(startIndex, endIndex - startIndex + 1)
.Where(i=>charArr.Contains(str[i]))
.ToArray();
In this case we get Enumerable.Range(2, 9) which generates a sequence between 2 and 10 and the Where clause filters the indexes of the characters in str that are matching one of the characters inside charArr.
Thanks everey one finaly i fixed it by your guid thanks all
myarr = new mytable[50];
number_of_records = 0;
number_of_records = fulllines.Length;
for (int line = 1; line < fulllines.Length; line++)
{
int c = 0;
for (int i = 0; i < record_lenth; i++)
{
string data = "";
string currentline = fulllines[line];
string value = "";
for (int x = c; x < fulllines[line].Length; x++)
{
value += currentline[x];
}
foreach (var item in value)
{
if (item == ',' || item == ';')
{
c++;
break;
}
else
{
data += item;
c++;
}
}
}
}
I want to merge 2 .txt files into one text file. Let's say I have 2 text files. First one contains 100 rows only "Try Again". Like this one in the picture:
And the second text file contains bunch of random codes:
I want to merge these 2 text files, like this one in the picture below:
I have one week and I have not figured it out yet.
Just open both files and, in a loop, read four lines from the first and one line from the second. Output each line as it's read.
using (var outputFile = File.CreateText("OutputFile.txt"))
{
using (var input1 = File.OpenText("TryAgain.txt"))
using (var input2 = File.OpenText("File2.txt"))
{
while (!input1.EndOfStream && !input2.EndOfStream))
{
int i;
for (i = 0; i < 4 && !input1.EndOfStream; ++i))
{
var s1 = input1.ReadLine();
outputFile.WriteLine(s1);
}
if (i != 4) break; // end of first file
// now read one line from the other file, and output it
var s2 = input2.ReadLine();
outputFile.WriteLine(s2);
}
}
}
This has the advantage of not having to read both files into memory all at once, and you don't have to build the entire output in memory. Each line is output immediately after it's written.
Edit: I edit the code via Jim, he warned me and now it's working.
First you need to read both files and store all lines to string array. Then loop them like down bellow. Every fifth item you need to check and write from second file.
PS: I did not try the code but prob it will work without an error.
string[] first = System.IO.File.ReadAllLines("path of first txt file");
string[] second = System.IO.File.ReadAllLines("path of second txt file");
var sb = new StringBuilder();
var k = 0;
var m = 0;
for (int i = m; i < second.Length; i++)
{
m = i + 1;
for (int j = k; j < first.Length; j++)
{
k = j + 1;
if (j != 0 && j % 4 == 0)
{
sb.Append(second[i] + "\n");
break;
}
else
{
sb.Append(first[j] + "\n");
continue;
}
}
}
// create new txt file
var file = new System.IO.StreamWriter("path of third txt file");
file.WriteLine(sb.ToString());
I've tried a few different methods and none of them work correctly so I'm just looking for someone to straight out show me how to do it . I want my application to read in a file based on an OpenFileDialog.
When the file is read in I want to go through it and and run this function which uses Linq to insert the data into my DB.
objSqlCommands.sqlCommandInsertorUpdate
However I want to go through the string , counting the number of ","'s found . when the number reaches four I want to only take the characters encountered until the next "," and do this until the end of the file .. can someone show me how to do this ?
Based on the answers given here my code now looks like this
string fileText = File.ReadAllText(ofd.FileName).Replace(Environment.NewLine, ",");
int counter = 0;
int idx = 0;
List<string> foo = new List<string>();
foreach (char c in fileText.ToArray())
{
idx++;
if (c == ',')
{
counter++;
}
if (counter == 4)
{
string x = fileText.Substring(idx);
foo.Add(fileText.Substring(idx, x.IndexOf(',')));
counter = 0;
}
}
foreach (string s in foo)
{
objSqlCommands.sqlCommandInsertorUpdate("INSERT", s);//laClient[0]);
}
However I am getting an "length cannot be less than 0" error on the foo.add function call , any ideas ?
A Somewhat hacky example. You would pass this the entire text from your file as a single string.
string str = "1,2,3,4,i am some text,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20";
int counter = 0;
int idx = 0;
List<string> foo = new List<string>();
foreach (char c in str.ToArray())
{
idx++;
if (c == ',')
{
counter++;
}
if (counter == 4)
{
string x = str.Substring(idx);
foo.Add(str.Substring(idx, x.IndexOf(',')));
counter = 0;
}
}
foreach(string s in foo)
{
Console.WriteLine(s);
}
Console.Read();
Prints:
i am some text
9
13
17
As Raidri indicates in his answer, String.Split is definitely your friend. To catch every fifth word, you could try something like this (not tested):
string fileText = File.ReadAllText(OpenDialog.FileName).Replace(Environment.NewLine, ",");
string words[] = fileText.Split(',');
List<string> everFifthWord = new List<string>();
for (int i = 4; i <= words.Length - 1, i + 5)
{
everyFifthWord.Add(words[i]);
}
The above code reads the selected file from the OpenFileDialog, then replaces every newline with a ",". Then it splits the string on ",", and starting with the fifth word takes every fifth word in the string and adds it to the list.
File.ReadAllText reads a text file to a string and Split turns that string into an array seperated at the commas:
File.ReadAllText(OpenDialog.FileName).Split(',')[4]
If you have more than one line use:
File.ReadAllLines(OpenDialog.FileName).Select(l => l.Split(',')[4])
This gives an IEnumerable<string> where each string contains the wanted part from one line of the file
It's not clear to me if you're after every fifth piece of text between the commas or if there are multiple lines and you want only the fifth piece of text on each line. So I've done both.
Every fifth piece of text:
var text = "1,2,3,4,i am some text,6,7,8,9"
+ ",10,11,12,13,14,15,16,17,18,19,20";
var everyFifth =
text
.Split(',')
.Where((x, n) => n % 5 == 4);
Only the fifth piece of text on each line:
var lines = new []
{
"1,2,3,4,i am some text,6,7",
"8,9,10,11,12,13,14,15",
"16,17,18,19,20",
};
var fifthOnEachLine =
lines
.Select(x => x.Split(',')[4]);
I have a problem with C#.
I am writing code to search a text file until it finds a certain word, then the code should move three lines and read the fourth, then continue the search to find the certain word again.
Now I don't know how to navigate through the file (forward and backward) to the line I want.
Can anybody help?
You can do something like this:
var text = File.ReadAllLines("path"); //read all lines into an array
var foundFirstTime = false;
for (int i = 0; i < text.Length; i++)
{
//Find the word the first time
if(!foundFirstTime && text[i].Contains("word"))
{
//Skip 3 lines - and continue
i = Math.Min(i+3, text.Length-1);
foundFirstTime = true;
}
if(foundFirstTime && text[i].Contains("word"))
{
//Do whatever!
}
}
// read file
List<string> query = (from lines in File.ReadLines(this.Location.FullName, System.Text.Encoding.UTF8)
select lines).ToList<string>();
for (int i = 0; i < query.Count; i++)
{
if (query[i].Contains("TextYouWant"))
{
i = i + 3;
}
}
Your requirements state that you are searching for a specific word. If that is true and you are not instead looking for a specific string, then the checked answer on this is wrong. Instead you should use:
string[] lines = System.IO.File.ReadAllLines("File.txt");
int skip = 3;
string word = "foo";
string pattern = string.Format("\\b{0}\\b", word);
for (int i = 0; i < lines.Count(); i++)
{
var match = System.Text.RegularExpressions.Regex.IsMatch(lines[i], pattern);
System.Diagnostics.Debug.Print(string.Format("Line {0}: {1}", Array.IndexOf(lines, lines[i], i) + 1, match));
if (match) i += skip;
}
If you use the string.contains method and the word you are searching for is "man", while your text somewhere contains "mantle" and "manual", the string.contains method will return as true.
I have a text file that I load into a string array. The contents of the file looks something like this:
OTI*IA*IX*NA~ REF*G1*J EVERETTE~ REF*11*0113722462~
AMT*GW*229.8~ NM1*QC*1*JENNINGS*PHILLIP~ OTI*IA*IX*NA~ REF*G1*J
EVERETTE~ REF*11*0113722463~ AMT*GW*127.75~
NM1*QC*1*JENNINGS*PHILLIP~ OTI*IA*IX*NA~ REF*G1*J EVERETTE~
REF*11*0113722462~ AMT*GW*10.99~ NM1*QC*1*JENNINGS*PHILLIP~ ...
I'm looking for the lines that start with OTI, and if it's followed by "IA" then I need to get the 10 digit number from the line that starts with REF*11. So far, I have this:
string[] readText = File.ReadAllLines("myfile.txt");
foreach (string s in readText) //string contains 1 line of text from above example
{
string[] currentline = s.Split('*');
if (currentline[0] == "OTI")
{
//move down 2 lines and grab the 10 digit
//number from the line that starts with REF*11
}
}
The line I need is always 2 lines after the current OTI line. How do I access the line that's 2 lines down from my current line?
Instead of using foreach() you can use a for(int index = 0; index < readText.Length; index++)
Then you know the line you are accessing and you can easily say int otherIndex = index + 2
string[] readText = File.ReadAllLines("myfile.txt");
for(int index = 0; index < readText.Length; index++)
{
string[] currentline = readText[index].Split('*');
if (currentline[0] == "OTI")
{
//move down 2 lines and grab the 10 digit
//number from the line that starts with REF*11
int refIndex = index + 2;
string refLine = readText[refIndex];
}
}
What about:
string[] readText = File.ReadAllLines("myfile.txt");
for (int i = 0; i < readText.Length; i++)
{
if (readText[i].StartsWith("OTI") && readText[i+2].StartsWith("REF*11")){
string number = readText[i+2].Substring("REF*11".Length, 10);
//do something
}
}
This looks like an EDI file! Ahh, EDI, the memories...
The good news is that the EDI file is delimited, just like most CSV file formats. You can use any standard CSV file library to load the EDI file into a gigantic array, and then iterate through it by position.
I published my open source CSV library here, feel free to use it if it's helpful. You can simply specify the "asterisk" as the delimiter:
https://code.google.com/p/csharp-csv-reader/
// This code assumes the file is on disk, and the first row of the file
// has the names of the columns on it
DataTable dt = CSVReader.LoadDataTable(myfilename, '*', '\"');
At this point, you can iterate through the datatable as normal.
for (int i = 0; i < dt.Rows.Count; i++) {
if (dt.Rows[i][0] == "OTI") {
Console.WriteLine("The row I want is: " + dt.Rows[i + 2][0]);
}
}
If you want to use regex to tokenize the items and create dynamic entities, here is such a pattern
string data = #"NM1*QC*1*JENNINGS*PHILLIP~
OTI*IA*IX*NA~
REF*G1*J EVERETTE~
REF*11*0113722463~
AMT*GW*127.75~
NM1*QC*1*JENNINGS*PHILLIP~
OTI*IA*IX*NA~
REF*G1*J EVERETTE~
REF*11*0113722462~
AMT*GW*10.99~
NM1*QC*1*JENNINGS*PHILLIP~";
string pattern = #"^(?<Command>\w{3})((?:\*)(?<Value>[^~*]+))+";
var lines = Regex.Matches(data, pattern, RegexOptions.Multiline)
.OfType<Match>()
.Select (mt => new
{
Op = mt.Groups["Command"].Value,
Data = mt.Groups["Value"].Captures.OfType<Capture>().Select (c => c.Value)
}
);
That produces a list of items like this which you can apply your business logic to:
Why dont you use regular expression matches using Regex.Match or Regex.Matches defined in System.Text.RegularExpressions? You can also look at string pattern matching algorithms such as the Knuth-Morris-Pratt algorithms.
string[] readText = File.ReadAllLines("myfile.txt");
foreach (string s in readText) //string contains 1 line of text from above example
{
string[] currentline = s.Split('*');
if (currentline[0] == "REF"&¤tline[1] == "11")
{
found=false;
needed=current+2;
}
}
string[] readText = File.ReadAllLines("myfile.txt");
for(int linenum = 0;linenum < readText.Length; linenum++)
{
string s = readText[linenum];
string[] currentline = s.Split('*');
if (currentline[0] == "OTI")
{
//move down 2 lines and grab the 10 digit
linenum +=2;
string refLine = readText[linenum];
//number from the line that starts with REF*11
// Extract your number here from refline
}
}
Thank guys .. this is what I came up with, but I'm also reading your answers as I KNOW I will learn something! Thanks again!
string[] readText = File.ReadAllLines("myfile.txt");
int i = 0;
foreach (string s in readText)
{
string[] currentline = s.Split('*');
if (currentline[0] == "OTI")
{
lbRecon.Items.Add(readText[i+2].Substring(8, 9));
}
i++;
}