Develop Reference

MS Graph and Azure Active Directory

Problem: How to authenticate in MS Graph using Azure AAD access token.
Current flow:
My web app has AAD configured with "Log in with AAD"
If I log into AAD my demo app is showing and if I go to https://******.azurewebsites.net/.auth/me
then I get the access_token.
What I tried:
So I tried a couple of things and this was the last, I copied the access_token as code and tried to send it, didn't work.
I'm searching for a solution to silently use the already logged-in user and call MS Graph.

The reason for the error is that you have used the wrong code. Don't try to send the access token as a code, you should request an authorization code in your browser.
https://login.microsoftonline.com/{tenant id}/oauth2/v2.0/authorize?
client_id={client id}
&response_type=code
&redirect_uri={redirect_uri}
&response_mode=query
&scope=https://graph.microsoft.com/.default
&state=12345
In addition, redirect_uri is also a required parameter.

For the already logged in user you need follow the below steps for access:
Make sure you have enable the allow access token for the register app as below
Write code to acquire access token for the for the logged in user Reference
Now you can pass this token in other successive call to get the result.

Possible to get access token on behalf on user without MS Library in Razor?

I am writing a Razor page application that get's the users data in Azure AD in the form of a HTTP GET call.
However, most of the documentation I found says to use the MS GRAPH library- is there a way to get the access token on behalf of the user with just standard HTTP?
I am not sure how to get the prompt to log into Office365 to show up from my razor pages application.

You could get access token with auth code flow.
Get an authorization code in browser:
https://login.microsoftonline.com/{tenant}/oauth2/v2.0/authorize?
client_id={client-id}
&response_type=code
&redirect_uri={redirect_uri in azure portal}
&response_mode=query
&scope=https://graph.microsoft.com/.default
&state=12345
Get access token with the previous code:
POST https://login.microsoftonline.com/{tenant}/oauth2/v2.0/token
client_id={client-id}
&scope=https://graph.microsoft.com/.default
&code={code from previous step}
&redirect_uri={redirect_uri in azure portal}
&grant_type=authorization_code
You will obtain the upn(The username of the user) and others after decoding the access token. If you have the required permission of MS Graph, you could also get the details of user with the API.

How to get OAuth2 access token for EWS managed API in service/daemon application

Scenario
I have an Exchange Online environment and service/daemin (no interactive user) application on the Azure VM. Service uses EWS managed API to work with emails in the mailbox of any tenant user. Now EWS client uses Basic authentication that, according to Microsoft, will become unsupported in EWS to access Exchange Online.
Question/Issue
So, I need to find a way to get valid access token for service/daemon application to use with EWS managed API.
My findings
The following article shows an example of using OAuth 2.0 with EWS managed API. This example works, but it uses interactive method of getting consent (sign-in form appears allowing user authenticate themselves and grant requested permission to application) that is not suitable for service/daemon app scenario, because there is no interactive user.
For service/daemon application I need to use client credential authentication flow.
Registered application
Using admin account on https://aad.portal.azure.com portal I registered application with Azure Active Directory. Added client secret for registered application.
Aforementioned article uses https://outlook.office.com/EWS.AccessAsUser.All as a scope. But I did not find permission with such a URL on the portal. I found only the following permissions under Office 365 Exchange Online > Application permissions > Mail:
https://outlook.office365.com/Mail.Read Allows the app to read mail in all mailboxes without a signed-in user
https://outlook.office365.com/Mail.ReadWrite Allows the app to create, read, update, and delete mail in all mailboxes without a signed-in user.
I added both of them and granted admin consent for all users.
Getting access token
For testing purposes and simplicity I did not use any auth libraries (ADAL, MSAL etc.). I used Postman to get access token, then set token variable in debug (see code snippet later in the post).
I tried different endpoints to get acess token.
OAuth 2.0 token endpoint (v2)
POST: https://login.microsoftonline.com/<TENANT_ID>/oauth2/v2.0/token
grant_type=client_credentials
client_id=***
client_secret=***
scope=https://outlook.office.com/EWS.AccessAsUser.All
Sending this request produces the following error response:
AADSTS70011: The provided request must include a 'scope' input parameter. The provided value for the input parameter 'scope' is not valid. The scope https://outlook.office.com/EWS.AccessAsUser.All is not valid.
I tried changing scope to https://outlook.office.com/.default. Access token was returned, but it appeared to be invalid for EWS. EWS client throws 401 error with the following value of x-ms-diagnostics response header:
2000008;reason="The token contains no permissions, or permissions can not be understood.";error_category="invalid_grant"
OAuth 2.0 token endpoint (v1)
POST: https://login.microsoftonline.com/<TENANT_ID>/oauth2/token
grant_type=client_credentials
client_id=***
client_secret=***
resource=https://outlook.office.com
Access token was returned, but also appeared to be invalid for EWS. EWS client throws 401 error with the same value of x-ms-diagnostics response header as described ealier in #1.
Use aquired access token with EWS managed API
Here is code sample that I used to test EWS client with access token acquired in Postman:
var token = "...";
var client = new ExchangeService
{
Url = new Uri("https://outlook.office365.com/EWS/Exchange.asmx"),
Credentials = new OAuthCredentials(token),
ImpersonatedUserId = new ImpersonatedUserId(ConnectingIdType.SmtpAddress,
"user#domain.onmicrosoft.com"),
};
var folder = Folder.Bind(client, WellKnownFolderName.SentItems);

We had a similar problem: We wanted to use a Service Account to connect to a single mailbox and just doing some stuff with the EWS API (e.g. searching in the GAL) and the full_access_as_app seems like an overkill.
Fortunately it is possible:
Follow the normal "delegate" steps
And use this to get a token via username/password:
...
var cred = new NetworkCredential("UserName", "Password");
var authResult = await pca.AcquireTokenByUsernamePassword(new string[] { "https://outlook.office.com/EWS.AccessAsUser.All" }, cred.UserName, cred.SecurePassword).ExecuteAsync();
...
To make this work you need to enable the "Treat application as public client" under "Authentication" > "Advanced settings" because this uses the "Resource owner password credential flow". (This SO answer helped me alot!)
With that setup we could use a "tradional" username/password way, but using OAuth and the EWS API.

You can protect your client application with either a certificate or a secret. The two permissions that I needed to get this to work were Calendars.ReadWrite.All and full_access_as_app. I never tried acquiring my token via PostMan, but use AcquireTokenAsync in Microsoft.IdentityModel.Clients.ActiveDirectory. In that call, the resource parameter I use is https://outlook.office365.com/. It's pretty simple once you know all the little twists and turns. And full disclosure: I was one lost puppy until MSFT support helped me through this. The doc on the web is often outdated, conflicting, or at best, confusing.

You need to register your app in Azure and use certificate based authentication. https://blogs.msdn.microsoft.com/emeamsgdev/2018/09/11/authenticating-against-exchange-web-services-using-certificate-based-oauth2-tokens/

I run into the same issue while following Microsoft official docs for OAuth 2.0 client credentials flow
According to the Microsoft identity platform and the OAuth 2.0 client credentials flow, the scope "should be the resource identifier (application ID URI) of the resource you want, affixed with the .default suffix" (see default scope doc).
So the question is how to convert https://outlook.office.com/EWS.AccessAsUser.All into the resource identifier.
Experimentally I manage to make it working using scope=https://outlook.office365.com/.default. I granted full_access_as_app (Office 365 Exchange Online / Application permissions) and got administrator consent for it.

I did face this issue while implementing OAuth for EWS. My application is not using EWS Managed API. Here is what all I did to make it working.
Added permission Office 365 Exchange Online > full_access_as_app to application.
Acquired access token for scope https://outlook.office365.com/.default.
POST https://login.microsoftonline.com/{tenant}/oauth2/v2.0/token
form-data = {
client_id,
client_secret,
grant_type: 'client_credentials',
scope: 'https://outlook.office365.com/.default',
};
Added access token as Authorization header and ExchangeImpersonation SOAP header to the request.
<SOAP-ENV:Header>
<t:ExchangeImpersonation>
<t:ConnectingSID>
<t:PrimarySmtpAddress>user#domain.com</t:PrimarySmtpAddress>
</t:ConnectingSID>
</t:ExchangeImpersonation>
</SOAP-ENV:Header>

Late answer, but since this seems to come up, and I was just working with this... why not.
If you use Microsoft's v2.0 URLs for OAUTH2 (https://login.microsoftonline.com/common/oauth2/v2.0/authorize and .../common/oauth2/v2.0/token) then the scope for Office 365 EWS is:
https://outlook.office365.com/EWS.AccessAsUser.All
You'll probably want to combine this scope with "openid" (to get the signed in user's identity) and "offline_access" (to get a refresh token). But then offline_access may not be necessary when using client credentials (because you don't have to prompt a human user for them every time you need an access token).
In other words:
params.add("client_id", "...")
...
params.add("scope", "openid offline_access https://outlook.office365.com/EWS.AccessAsUser.All")
If using v1 OAUTH2 URLs (https://login.microsoftonline.com/common/oauth2/authorize and .../common/oauth2/token) then you can use a "resource" instead of a "scope". The resource for Office 365 is https://outlook.office365.com/.
Or in other words:
params.add("resource", "https://outlook.office365.com/")
Note that in the latter case, you're not asking for any scopes (it's not possible to combine "resource" with scopes). But the token will automatically cover offline_access and openid scopes.

I used this method successfully:
Install Microsoft Authentication Library module ( MSAL.PS)
https://www.powershellgallery.com/packages/MSAL.PS/4.2.1.3
Configure Delegate Access as per MSFT instructions: https://learn.microsoft.com/en-us/exchange/client-developer/exchange-web-services/how-to-authenticate-an-ews-application-by-using-oauth
Configure ApplicationImpersonation for a service account as normal
Grab your token
$cred = Get-Credential
$clientid = ""
$tenantid = ""
$tok = Get-MsalToken -ClientId $clientid -TenantId $tenantid -UserCredential $cred -Scopes "https://outlook.office.com/EWS.AccessAsUser.All"

DocuSign Service integration authentication with jwt

I want to implement DocuSign Service integration authentication with jwt flow.
I’ve generated valid jwt (validated on jwt.io) and I can successfully obtain access token based on jwt according to https://docs.docusign.com/esign/guide/authentication/oa2_jwt.html#requesting-the-access-token
I found on this blog post: https://www.docusign.com/blog/dsdev-docusign-developers-look-inside-new-authentication-apis/ that sub claim should be omitted in case application represents user in the system (which I need):
sub: The user id of the principal you are requesting a token for. If omitted a token will be issued to represent the application itself instead of a user in the system. Required: No
But in next step "Obtaining the Base URI" that states:
The first thing you should do after getting your access token is to use the /oauth/userinfo endpoint to get user’s account and base URI information that you’ll use to access the DocuSign API.
GET /oauth/userinfo Authorization: Bearer eyJ0eX...AnHDQ0bbA
Fails with status code 401 Unauthorized with response body details:
{
"error": "internal_server_error",
"reference_id": "e051ca48-....f0f"
}
I also tried to call Login (from AuthenticationApi - DocuSign.NetCore 1.1.0 nuget package), with default authorization header containing an access token like this:
Configuration.Default.DefaultHeader.Add("Authorization", string.Format("Bearer {0}", accessToken));
AuthenticationApi authApi = new AuthenticationApi(Configuration.Default);
LoginInformation loginInfo = authApi.Login();
Code above works only if I use OAuth2 access token that I can obtain directly from api explorer:
https://apiexplorer.docusign.com/#/esign/restapi?categories=Authentication&tags=Authentication&operations=login&mode=basic
but when I use access token that I've obtained by following official documentation (described above) I get exception:
DocuSign.eSign.Client.ApiException: ‘Error calling Login: {
“errorCode”: “USER_AUTHENTICATION_FAILED”,
“message”: “One or both of Username and Password are invalid. Invalid access token”.
What seems to be that I'm missing?

As Amit says, you need to provide a userID (guid format). The fact that you're receiving the Consent Required is good news: you're almost there.
Your user can grant consent individually or you can grant blanket consent at the org level if you have org admin turned on.
See my video or blog post for how to individually grant consent.

Ommitting sub is not yet implemented, it is a future state which is yet to be implemented. As of now, you always need to pass sub in the call, and you can get Accesstoken for a user only. That's a blog link with the big picture overview of what's coming with new OAUTH, but whats currently implemented is available at DS Docs

How to use OAuth accesstoken to acquire profile images from various providers using DotNetOpenAuth.AspNet and Microsoft.AspNet.Membership.OpenAuth?

I've created a web application that uses the OAuth authentication and universal connectors as explained in this tutorial, and started to fiddle around a little to add support for other providers like Yahoo and LinkedIn. So the authentication part works and users are created in the asp.net Membership provider. Also, all the providers return the accesstoken which I supposedly can use to retrieve more information regarding the user.
I'd really like to acquire the profile image, but it seems every provider has a different way of requesting this information. Twitter even describes a way to authorise every request by changing the HTTP header information.
Whilst reading this information on the websites of the various providers I was wondering whether this functionality isn't also already included somewhere in DotNetOpenAuth.AspNet or Microsoft.AspNet.Membership.OpenAuth implementation.
How can I use DotNetOpenAuth.AspNet and/or Microsoft.AspNet.Membership.OpenAuth to request the profile image of the loggedin user using the just acquired accesstoken?
UPDATE in response to Leo's answer
I use the following code to make a call on LinkedIn's API.
string accessToken = extraData["accesstoken"]; // Extra Data received from OAuth containing the accesstoken.
WebRequest request = WebRequest.Create("https://api.linkedin.com/v1/people/~:(id,first-name,last-name,date-of-birth,email-address,picture-url)?oauth2_access_token=" + accessToken);
using (WebResponse response = request.GetResponse())
{
// do something with response here.
}
Error message is "The remote server returned an error: (401) Unauthorized.".
What am I doing wrong?

The answer is simple...you can't use any of these. These are wrappers of OAuth and OAuth only specifies how you can authenticate a user. Now, to request the user's profile photo you will need to use the external provider's own API and you will need most likely a valid access token. So, you will need to use one of these implementations of OAuth to authenticate a user and the recieve an access token, store the access token somewhere (usually a cookie) and then use the access token to make sub-sequent calls to the provider's APIs. Examples and links....
Facebook's Graph API allows you to retrieve users profiles
https://developers.facebook.com/docs/graph-api/quickstart/
notice that all examples in the link above will require you to include the access token in a parameter named access_token, for example
https://graph.facebook.com/me?method=GET&format=json&suppress_http_code=1&access_token={your-access-token}
Google...
https://www.googleapis.com/oauth2/v3/userinfo?access_token={your-access-token}
LinkedIn...
https://api.linkedin.com/v1/people/~:(id,first-name,last-name,date-of-birth,email-address,picture-url)?oauth2_access_token={your-access-token}
You can get more specific information from these providers' websites
Let me know if you have any other doubts I might be able to help you since I have implemented stuff like these before.
Cheers, Leo