I have a button for exiting the form and this is the code
DialogResult dialogResult = MessageBox.Show("Are you sure you want to exit?", "Exit Program?", MessageBoxButtons.YesNo);
if (dialogResult == DialogResult.No)
{
}
else
{
Application.Exit();
}
I tried using debugger mode, and after I click yes, it goes through Application.Exit() and then fires up the FormClosing event then running the same dialog.
I also tried deleting the code in FormClosing event so it only has Application.Exit() but using Alt+F4 or clicking the X button will exit the application automatically.
My question is how can I question the user if he wants to exit the program but not firing the dialog twice?
Thanks in advance, and I'm letting you all know I'm just a beginner and this is my biggest project so I want to make this great.
Here's an example. It only asks for confirmation if the close was initiated by the user - you probably don't want a MessageBox popping up when Windows is restarting.
private void form_FormClosing(object sender, FormClosingEventArgs e)
{
if (e.CloseReason == CloseReason.UserClosing)
{
DialogResult dialogResult = MessageBox.Show("Are you sure you want to exit?", "Exit Program?", MessageBoxButtons.YesNo);
if (dialogResult == DialogResult.Yes)
{
Application.Exit();
}
}
else
{
// Cancel the close
e.Cancel = true;
}
}
There are two ways to achieve this.
By unsubscribe the even on button click
As suggested in stuartd's answer, checking reason of closing (but there is a problem in his answer so adding this approach too with fix, so it will help future people.)
I am assuming, As you need this confirmation in both cases, button click and 'x' button click, you have put the same code in both handler.
Approach one
In the handler of button click, while you are asking for user confirmation and if user is clicking 'yes'.
Before the line,
Application.Exit();
you should unsubscribe the Form closing event. By doing this, It must not raise form closing event while performing Application.Exit()
assuming your form is MainForm and event is MainForm_Closing, it would look like,
private void btnClose_Click(object sender, EventArgs e)
{
DialogResult dialogResult = MessageBox.Show("Are you sure you want to exit?", "Exit Program?", MessageBoxButtons.YesNo);
if (dialogResult == DialogResult.Yes)
{
this.FormClosing -= MainForm_FormClosing;
Application.Exit();
}
}
so it will not raise form closing event while performing Application.Exit() and thus your problem will be solved.
Approach Two
As stuartd has suggested (which is more cleaner way according to me. +1 for that), you can check for form closing reason in Form Closing event handler.
Note that there is a little problem (bug) in his sample code [which you have already accepted as an answer!!]. After clicking 'x' button or Alt+F4 by mistake; if user clicks on 'No' on the confirmation message, then too form is being closed because there is no handling for else condition. Proper solution should be like below.
private void MainForm_FormClosing(object sender, FormClosingEventArgs e)
{
if (e.CloseReason == CloseReason.UserClosing)
{
DialogResult dialogResult = MessageBox.Show("Are you sure you want to exit?", "Exit Program?", MessageBoxButtons.YesNo);
if (dialogResult == DialogResult.Yes)
Application.Exit();
else
e.Cancel = true; //stopping Form Close perocess.
}
}
Related
Here is my C# code:
private void StudentReg_FormClosing(object sender, FormClosingEventArgs e)
{
DialogResult dialog = MessageBox.Show("Do you really want to close this window?", "Exit", MessageBoxButtons.YesNo);
if (dialog == DialogResult.Yes)
{
Application.Exit();
}
else if (dialog == DialogResult.No)
{
e.Cancel = true;
}
}
Depending on how you setup your application like if this is your main form or you have multiple you may need to just remove the event to avoid duplicate calls to it.
Remove the event handler before calling application.exit and I think your issue will be solved.
This is psuedo-code.
private void StudentReg_FormClosing(object sender, FormClosingEventArgs e)
{
DialogResult dialog = MessageBox.Show("Do you really want to close this window?", "Exit", MessageBoxButtons.YesNo);
if(dialog == DialogResult.Yes)
{
StudentReg.FormClosing -= StudentReg_FormClosing;
Application.Exit();
}
else if(dialog == DialogResult.No)
{
e.Cancel = true;
}
}
I doubt if you really want Application.Exit();: you prompt (bold is mine)
Do you really want to close this window
It is the window (Form), not the entire Aplication you want to close. If it's your case, you can just do nothing and let the form (window) close itself:
private void StudentReg_FormClosing(object sender, FormClosingEventArgs e)
{
// Cancel closing (i.e. do NOT close the form) if and only if user's chosen "No".
// Do nothing (i.e. do not cancel) in other cases (let the form be closed)
// So we assign true (cancel) if "No" has been pressed, false otherwise
e.Cancel = MessageBox.Show(
"Do you really want to close this window?",
"Exit",
MessageBoxButtons.YesNo) == DialogResult.No;
}
i am pretty newbie for coding. Here is i am having a problem:
private void pano_FormClosing(object sender, FormClosingEventArgs e)
{
DialogResult dialog = MessageBox.Show("Uygulamadan çıkış yapmak istediğinizden emin misiniz?", "Çıkış", MessageBoxButtons.YesNo);
if (dialog == DialogResult.Yes)
{
Application.Exit();
}
else if (dialog == DialogResult.No)
{
e.Cancel = true;
}
My purpose with this code block to ask user "are sure to quit" but unfortunetly when i close the application, i got notification window for 3 times? Is there any idea why thats happening or any solution?
Thanks a lot.
Nuri.
Firstly, as Steve pointed out, remove the 'Yes' part - if not explicitly canceled, the event will close that form as a result of clicking.
Now, for the problem of yours. Seems like your alert is called twice. I was able to solve that easily by making a static bool close_alert_shown, and when the first alert is shown, set it to true so that the next alert won't pop up.
Final code looks like that:
if (close_alert_shown) return;
close_alert_shown = true;
DialogResult dialog = MessageBox.Show("Uygulamadan çıkış yapmak istediğinizden emin misiniz?", "Çıkış", MessageBoxButtons.YesNo);
if (dialog == DialogResult.No)
{
e.Cancel = true;
close_alert_shown = false;
}
And on the top of the form (before the public Form1() contructor line):
static bool close_alert_shown = false;
What i suspect is when application is exiting, it is again calling form closing since we have subscribed for that event. I assume, simple fix would be unsubscribe from the event before calling exit.
this.FormClosing-=Form1_FormClosing;
Application.Exit();
I seem to be having difficult in having a Dialog box pop up and function properly when a use clicks the red "X" button in the top right corner of the application. I can make the Dialog appear to ask if they really want to close the application, but regardless of what they click, it will close the form. The code I have is as follows;
private void Main_FormClosing(object sender, FormClosingEventArgs e)
{
DialogResult dr = MessageBox.Show("Are you sure want to close?", "Close Program", MessageBoxButtons.OKCancel);
if (dr == DialogResult.Cancel)
{
e.Cancel = false;
}
}
I have also tried instead of e.Cancel to check if dr is equal to ok but the same situation happens.
Any thoughts?
e.Cancel = true; cancels the action. and it is by default false. you are not setting it to true anywhere. try this.
private void Main_FormClosing(object sender, FormClosingEventArgs e)
{
DialogResult dr = MessageBox.Show("Are you sure want to close?", "Close Program", MessageBoxButtons.OKCancel);
if (dr == DialogResult.Cancel)
{
e.Cancel = true;
}
}
oneliner:
e.Cancel = MessageBox.Show("Are you sure want to close?", "Close Program", MessageBoxButtons.OKCancel) == DialogResult.Cancel;
The issue is that you are never setting e.Cancel to true. I would modify your message box to show Yes and No buttons as I feel it makes it clearer to the user and then I would just set e.Cancel to true if the user chooses No.
private void Main_FormClosing(object sender, FormClosingEventArgs e)
{
DialogResult dr = MessageBox.Show("Are you sure want to close?", "Close Program", MessageBoxButtons.YesNo);
e.Cancel = dr == DialogResult.No;
}
The Closing event occurs as the form is being closed. When a form is closed, all resources created within the object are released and the form is disposed. If you cancel this event, the form remains opened. To cancel the closure of a form, set the Cancel property of the CancelEventArgs passed to your event handler to true.
e.Cancel = true;
I have a WinForms application that checks for pending changes whenever the user hits the cancel button. If there are pending changes, I prompt the user to see if they are sure they wish to cancel. If they do, I close the form. If not, I just return. However, the form is closing anyways. After some debugging, I realized it was because this particular button is set to the form's CancelButton, so clicking it caused the form to close. To verify, I removed the CancelButton property, but the behavior persisted.
How can I prevent this automatic closing? Here is my event handler code:
private void closeButton_Click(object sender, EventArgs e)
{
DialogResult dr = DialogResult.Yes;
if (changesMade)
{
dr = MessageBoxEx.Show(this, "Are you sure you wish to disregard the changes made?", "Changes Made", MessageBoxButtons.YesNo);
}
if (dr == DialogResult.Yes)
{
Close();
}
else
{
//TODO:
}
}
In the above code, the form should only close if there are no changes made, or if the user chose to disregard them. I made changes, and clicked 'No' to the DialogBox, but the form still closed. With and without the button set as the form's CancelButton.
Just set the property DialogResult of the form to the enum DialogResult.None
....
if (dr == DialogResult.Yes)
{
Close();
}
else
{
this.DialogResult = DialogResult.None;
}
or simply:
if (dr != DialogResult.Yes)
this.DialogResult = DialogResult.None;
The form closes automatically because the property DialogResult of the button is not set to DialogResult.None in the Forms Designer. In this scenario, the WinForms engine takes that value and assign it to the DialogResult property of the whole form causing it to automatically close. This is usually used in the calling code of the form to distinguish between a Confirm and a Cancel button
In the example below suppose that on the frmCustomers there are two buttons, one with the DialogResult property set to DialogResult.OK and another set to DialogResult.Cancel. Now if the user hits the OK button you know, in the calling code what to do with the inputs for your new customer
using(frmCustomers f = new frmCustomers())
{
if(f.ShowDialog() == DialogResult.OK)
{
// Execute code to save a customer
}
}
Following up on my comment, this is what I do for an internal tool I wrote recently:
private void Form_FormClosing(object sender, FormClosingEventArgs e)
{
e.Cancel = !PromptUnsavedChanges();
}
private bool PromptUnsavedChanges()
{
if (HasFormChanged()) //checks if form is different from the DB
{
DialogResult dr = MessageBox.Show("You have unsaved changes. Would you like to save them?", "Unsaved Changes", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Question);
if (dr == System.Windows.Forms.DialogResult.Yes)
tsmiSave_Click(null, null); // Saves the data
else if (dr == System.Windows.Forms.DialogResult.Cancel)
return false; // Cancel the closure of the form, but don't save either
}
return true; // Close the form
}
The logic could probably cleaned up from a readability point of view, now that I'm looking at it months later. But it certainly works.
With this you simply just call this.Close(); in your button click event. Then that event is what handles the prompting and decides if it should actually close or not.
I have a C# GUI application. When the user clicks on the red 'X' (for closing the app) I want to show a message and ask if he really wants to close it.
I found a solution:
DialogResult dialog = MessageBox.Show("Do you really want to close the program?", "SomeTitle", MessageBoxButtons.YesNo);
if (dialog == DialogResult.Yes)
{
Application.Exit();
}else if (dialog == DialogResult.No)
{
//don't do anything
}
When the user clicks 'yes', the application should terminate completely. (Is Application.Exit() correct for this purpose?)
When the user clicks 'no', the DialogResult/MessageBox should close, but the application should stay opened. However, it closes!!
How can I avoid this?
BTW: I use Visual Studio 2010 and Winforms.
Use the FormClosing event from the Form, and the FormClosingEventArgs to cancel the process.
example:
private void Form1_FormClosing(object sender, FormClosingEventArgs e)
{
DialogResult dialog = dialog = MessageBox.Show("Do you really want to close the program?", "SomeTitle", MessageBoxButtons.YesNo);
if (dialog == DialogResult.No)
{
e.Cancel = true;
}
}
Use the form's FormClosing event of your program window. You can then set e.Cancel to true if the user clicks no:
this.FormClosing += (s, e) => {
DialogResult dialog = dialog = MessageBox.Show("Really close?", "SomeTitle",
MessageBoxButtons.YesNo);
if (dialog == DialogResult.No)
{
e.Cancel = true;
}
};
I guess you are using FormClosed. Are you? Then it's too late.
Try this
this.FormClosing += new FormClosingEventHandler(delegate(object sender, FormClosingEventArgs e)
{
if (MessageBox.Show("Do you really want to exit this application?", MessageBoxButtons:=MessageBoxButtons.YesNo) == DialogResult.No)
{
e.Cancel = true;
}
});
Refer to Mudu's answer.
Basically unless you specify additional parameters to MessageBox.Show() you cannot get any result other than DialogResult.Ok from a default MessageBox.
The code you posted (minus your little typo of dialog = dialog =) works exactly as expected to me.
Also: Application.Exit() IS the correct way of closing an application :)