I've been trying to figure this out, but I don't think I understand Regex well enough to get to where I need to.
I have string that resemble these:
filename.txt(1)attribute, 2)attribute(s), more!)
otherfile.txt(abc, def)
Basically, a string that always starts with a filename, then has some text between parentheses. And I'm trying to extract that part which is between the main parentheses, but the text that's there can contain absolutely anything, even some more parentheses (it often does.)
Originally, there was a 'hacky' expression made like this:
/\(([^#]+)\)\g
And it worked, until we ran into a case where the input string contained a # and we were stuck. Obviously...
I can't change the way the strings are generated, it's always a filename, then some parentheses and something of unknown length and content inside.
I'm hoping for a simple Regex expression, since I need this to work in both C# and in Perl -- is such a thing possible? Or does this require something more complex, like its own parsing method?
You can change exception for # symbol in your regex to regex matches any characters and add quantifier that matches from 0 to infinity symbols. And also simplify your regex by deleting group construction:
\(.*\)
Here is the explanation for the regular expression:
Symbol \( matches the character ( literally.
.* matches any character (except for line terminators)
* quantifier matches between zero and unlimited times, as many times
as possible, giving back as needed (greedy)
\) matches the character ) literally.
You can use regex101 to compose and debug your regular expressions.
Regex seems overkill to me in this case. Can be more reliably achieved using string manipulation methods.
int first = str.IndexOf("(");
int last = str.LastIndexOf(")");
if (first != -1 && last != -1)
{
string subString = str.Substring(first + 1, last - first - 1);
}
I've never used Perl, but I'll venture a guess that it has equivalent methods.
Related
So i have the following RegEx for the purpose of finding and adding whitespace:
(\S)(\()
So for a string like "SomeText(Somemoretext)" I want to update this to "SomeText (Somemoretext)" it matches "t(" and so my replace eliminates the "t" from the string which is not good. I also do not know what the character could be, I'm merely trying to find the non-existence of whitespace.
Is there a better expression to use or is there a way to exclude the found character from the match returned so that I can safely replace without catching characters i do not want to replace?
Thanks
I find lookarounds hard to read and would prefer using substitutions in the replacement string instead:
var s = Regex.Replace("test1() test2()", #"(\S)\(", "$1 (");
Debug.Assert(s == "test1 () test2 ()");
$1 inserts the first capture group from the regex into the replacement string which is the non-space character before the opening parenthesis (.
If you need to detect the absence of space before a specific character (such as bracket) after a word, how about the following?
\b(?=[^\s])\(
This will detect words ( [a-zA-z0-9_] that are followed by a bracket, without a space).
(if I got your problem correctly) you can replace the full match with ( and get exactly what you need.
In case you need to look for absence spaces before a symbol (like a bracket) in any kind of text (as in the text may be non-word, such as punctuation) you might want to use the following instead.
^(?:\S*)(\()(?:\S*)$
When using this, your result will be in group 1, instead of just full match (which now contains the whole line, if a line is matched).
I'm trying to learn regex, but still have no clue. I have this line of code, which successfully seperates the placeholder 'FirstWord' by the '{' delimiter from all following text:
var regexp = new Regex(#"(?<FirstWord>.*?)\{(?<TextBetweenCurlyBrackets>.*?)\}");
Which reads this string with no problem:
Greetings{Hello World}
What I want to do is to replace the '{' with a character chain like for instance '/>>'
so I tried this:
var regexp = new Regex(#"(?<FirstWord>.*?)\/>>(?<OtherText>.*?)\");
I removed the last bracket and replaced the first one with '/>>' But it throws an ArgumentException. How would the correct character combination look like?
/ does not need to be escaped, unless you use it as the pattern-delimiter.:
#"(?<FirstWord>.*?)/>>(?<OtherText>.*?)\"
Also your last \ will basically escape the " which should end the String (c#-wise: remove it):
#"(?<FirstWord>.*?)/>>(?<OtherText>.*?)"
And since you want most likely fetch until the END of the String (.*? will fetch as less characters as required to satisfy the expression), you should use the $ at the end or use any other sort of delimiter (whitspace, linebreak, etc...).
#"(?<FirstWord>.*?)/>>(?<OtherText>.*?)$"
Example:
(.*?)/>>(.*?)$
Debuggex Demo
Removing the trailing $ will fetch the empty string for the second match group, because "" is the shortest string possible satisfying the expression .*?
(.*?)/>>(.*?)$ on This/>>Test One will match This and Test One
(.*?)/>>(.*?)\s on This/>>Test One will match This and Test
(.*?)/>>(.*?) on This/>>Test One will match This and ""
Note: I'm saying "" is the shortest string possible satisfying the expression .?* on purpose! A frequent Misstake is to interpret .*?a as "everything until a":
Regex is greedy by default!
Searching for the expressiong (.*?)a$ on "caba" will NOT fail to match - it will return cab!, because cab followed by a is satisfying the expression AND cab is the shortest string possible for any match.
One might also expect b to be matched - but regex is working from left to right, hence aborting once it found cab - even if b would be shorter.
I'm working on some code inherited from someone else and trying to understand some regular expression code in C#:
Regex.Replace(query, #"""[^""~]+""([^~]|$)",
m => string.Format(field + "_exact:{0}", m.Value))
What is the above regular expression doing? This is in relation to input from a user performing a search. It's doing a replace of the query string using the pattern provided in the second argument, with the value of the third. But what is that regular expression? For the life of me, it doesn't make sense. Thanks.
As far as I can see, xanatos' answer is correct. I tried to understand the regex, so here it comes:
"[^"~]+"([^~]|$)
You can test our regex and play with the single parts for better understanding at http://www.regexpal.com/
1.) a single character
"
The first pattern is a literal character. Since there is no statement of relative position, it can occur everywhere.
2.) a character class
[^"~]
The next expression is the []-bracket. This is a character set. It defines a quantity of characters, which maybe follow next. It is a placeholder for one single character... So lets see inside, which content is allowed:
^"~
The definition of the character class begins with an caret (^), which is a special character. Typing a caret after the opening square bracket will negate the character class. So it's "upside down": everything following, which does not match the class expression, matches and is a valid character.
In this case, every literal character is possible, except the two excluded ones: " or ~.
3.) a special character
+
The next expression, a plus, tells the engine to attempt to match the preceding token once or more.
So the defined character class should one or multiple times repeated to match the given expression.
4.) a single character
"
To match, the expression should contain furthermore one further apostrophe, which will be the corresponding apostrophe to the first one in 1.) since the character class in (2.) hence (3.) does not permit an apostrophe.
5.) a lookaround
([^~]|$)
The first structure here to examine is the ()-bracket. This is called a "Lookaround".
It is is a special kind of group. Lookaround matches a position. It does not expand the regex match.
So this means this part does not try to find any certain characters inside of an expression
rather then to localize them.
The localisation demands has two conditions, which are connected by a logical OR by the pipeline symbol: |
So the next character of the matched expression could either be
[^~] one single character out of the class everything excluding the character ~
or
$ the end of the line (or word, if multiline-mode is not used in regex engine)
I'll try to edit my answer to a better format, since this is my first post, I first have to check out how this is working.. :)
Update:
to "detect" a Asterisk/star in front/end of the line, you have to do following:
First it's a special character, so you have to escape it with an backslash: *
To define the position, you can use:
^ to look at the beginning of the line,
$ end of the line
The overall expression would be:
^* in front of the expression to search for an * at the beginning of
the line $* at the end of the regex to demand an * at the end.
.... in your case you can add the * in the last character class to detect an * in the end:
([^~]|$|$*)
and to force an * in the end, delete the other conditions:
($*)
PS:
(somehow my regex is swallowed up by formating engine, so my update is wrong...)
The # makes it necessary to escape all the " with a second ", so "". Without it to escape the " you would have used \", but I consider it better to always use # in regexes, because the \ is used quite often, and it's boring and unreadable to always have to escape it to \\.
Let's see what the regex really is:
Console.WriteLine(#"""[^""~]+""([^~]|$)");
is
"[^"~]+"([^~]|$)
So now we can look at the "real" regex.
It looks for a " followed by one or more non-" and non-~ followed by another " followed by a non-~ or the end of the string. Note that the match could start after the start of the string and it could end before the end of the string (with a non-~)
For example in
car"hello"help
it would match "hello"h
What I am trying to do is fairly simple, although I am running into difficulty. I have a string that is a url, it will have the format http://www.somedomain.com?id=someid what I want to retrive is the someid part. I figure I can use a regular expression but I'm not very good with them, this is what I tried:
Match match = Regex.Match(theString, #"*.?id=(/d.)");
I get a regex exception saying there was an error parsing the regex. The way I am reading this is "any number of characters" then the literal "?id=" followed "by any number of digits". I put the digits in a group so I could pull them out. I'm not sure what is wrong with this. If anyone could tell me what I'm doing wrong I would appreciated it, thanks!
No need for Regex. Just use built-in utilities.
string query = new Uri("http://www.somedomain.com?id=someid").Query;
var dict = HttpUtility.ParseQueryString(query);
var value = dict["id"]
You've got a couple of errors in your regex. Try this:
Match match = Regex.Match(theString, #".*\?id=(\d+)");
Specifically, I:
changed *. to .* (dot matches all non-newline chars and * means zero or more of the preceding)
added a an escape sequence before the ? because the question mark is a special charcter in regular expressions. It means zero or one of the preceding.
changed /d. to \d* (you had the slash going the wrong way and you used dot, which was explained above, instead of * which was also explained above)
Try
var match = RegEx.Match(theString, #".*\?id=(\d+)");
The error is probably due to preceding *. The * character in regex matches zero or more occurrences of previous character; so it cannot be the first character.
Probably a typo, but shortcut for digit is \d, not /d
. matches any character, you need to match one or more digits - so use a +
? is a special character, so it needs to be escaped.
So it becomes:
Match match = Regex.Match(theString, #".*\?id=(\d+)");
That being said, regex is not the best tool for this; use a proper query string parser or things will eventually become difficult to manage.
Duplicate
Regex for variable declaration and initialization in c#
I was looking for a Regular Expression to parse CSV values, and I came across this Regular Expression
[^,]+
Which does my work by splitting the words on every occurance of a ",". What i want to know is say I have the string
value_name v1,v2,v3,v4,...
Now I want a regular expression to find me the words v1,v2,v3,v4..
I tried ->
^value_name\s+([^,]+)*
But it didn't work for me. Can you tell me what I am doing wrong? I remember working on regular expressions and their statemachine implementation. Doesn't it work in the same way.
If a string starts with Value_name followed by one or more whitespaces. Go to Next State. In That State read a word until a "," comes. Then do it again! And each word will be grouped!
Am i wrong in understanding it?
You could use a Regex similar to those proposed:
(?:^value_name\s+)?([^,]+)(?:\s*,\s*)?
The first group is non-capturing and would match the start of the line and the value_name.
To ensure that the Regex is still valid over all matches, we make that group optional by using the '?' modified (meaning match at most once).
The second group is capturing and would match your vXX data.
The third group is non-capturing and would match the ,, and any whitespace before and after it.
Again, we make it optional by using the '?' modifier, otherwise the last 'vXX' group would not match unless we ended the string with a final ','.
In you trials, the Regex wouldn't match multiple times: you have to remember that if you want a Regex to match multiple occurrences in a strings, the whole Regex needs to match every single occurrence in the string, so you have to build your Regex not only to match the start of the string 'value_name', but also match every occurrence of 'vXX' in it.
In C#, you could list all matches and groups using code like this:
Regex r = new Regex(#"(?:^value_name\s+)?([^,]+)(?:\s*,\s*)?");
Match m = r.Match(subjectString);
while (m.Success) {
for (int i = 1; i < m.Groups.Count; i++) {
Group g = m.Groups[i];
if (g.Success) {
// matched text: g.Value
// match start: g.Index
// match length: g.Length
}
}
m = m.NextMatch();
}
I would expect it only to get v1 in the group, because the first comma is "blocking" it from grabbing the rest of the fields. How you handle this is going to depend on the methods you use on the regular expression, but it may make sense to make two passes, first grab all the fields seperated by commas and then break things up on spaces. Perhaps ^value_name\s+(?:([^,]+),?)* instead.
Oh yeah, lists....
/(?:^value_name\s+|,\s*)([^,]+)/g will theoreticly grab them, but you will have to use RegExp.exec() in a loop to get the capture, rather than the whole match.
I wish pre-matches worked in JS :(.
Otherwise, go with Logan's idea: /^value_name\s+([^,]+(?:,\s*[^,]+)*)$/ followed by .split(/,\s*/);