I've just finished my Windows Forms App project in Visual Studio using C#. I know I need to release it. To do so I need to go from Debug mode to Release above in VS and then just click on F6. After that I have a folder with an exe file in it. But in my project I use a dll library which was copied on my PC and registered by regsvr32.exe in cmd. Next in VS I went to Solution Explorer and added the library in References by writing the path to it. I also use two packages which were installed by NuGet Package Manager.
My program is developed to use it by my coworkers so I have to distribute it to them. The problem is that I don't know how to prepare my app for it.
I'm reading lots of different articles about the release step but I'm getting more confused. People usually write that I can just copy the exe file in the release folder and use it in another PC after installing .Net there. But in my project there are also the three libraries and without them my program won't work in another PC. I can copy and register the first library on other computers but what about the last two? How to set up them correctly?
About the first library, I put it in a folder created by me manually in the C directory of my computer. The release folder is in another place. And when registering this library in cmd and then adding it to References, I specified the path to it. It means if the path has been changed, it won't be possible to use the library in the project. I tried some times. It's not convenient and when placing the app in another PC without VS where I can specify the path, my program won't probably work. So it would be very convenient to place this library next to the release folder and after putting it in another PC, the path to the library wouldn't cause any problems.
To sum up, I'm looking for the way to easily and conveniently distribute my program to users. Of course, I want to put my app and the libraries together in a PC, not to set up them separately and then tune them separately to make the program work there. Might there a way to release it as an app with all the libraries connected to it?
I feel it must be easy but I'm not so experienced. I'm sorry for that.
It is recommended that you use ClickOnce deployment:
ClickOnce deployment is a Microsoft technology that allows you to easily deploy your Windows Forms App along with all its dependencies. With ClickOnce deployment, you can publish your application to a web server or a file share and users can install it by simply clicking on a link. ClickOnce will automatically download and install all the required DLLs and packages on the user's computer.
Of course, there are some third-party packaging software that I can't recommend. If ClickOnce doesn't help you, I'll think of other ways.
I'm currently working in VS2017 on a solution with multiple C# and C++ projects.
The installer project has the C++ redistributable as a prerequisite, with the option to download it from the component vendor's site.
Some of the clients want to be able to install the application without an internet connection.
The normal thing would be to put the package in the bootstraper and check the download from the same location as my application; the problem is every time Microsoft updates something with this library, compiling the application would work, but installation will have the old redistributable.
Is there any check to include Visual Studio libraries that are used when building the application, which ever version these may be?
I am trying to create a Windows setup file for my .NET project. My IDE is Rider.
Can I use ClickOnce within Rider?
I looked into Squirrel but it seems it does not provide a way to present user with prompts that are needed at the installation, but the update mechanism it has is very smooth. It also works for .NET Framework but doesn’t work for .NETCoreApp so I would need to implement the installer and updater as separate applications.
What are my other options if I wish to stay with Rider only?
I am looking at making an application more modular and accessing dlls so that I can change them if the client was wanting different functionality.
I know how to create the dlls and reference them, but I am trying to find a way to create an executable that will install a different version of a dll into the required application folder. I want to avoid having to put the new dlls into the original project and build a new install file and I want to keep things simple for the end user.
Currently I am using visual studio 2010
You could create MSI files for each of your dlls and use the standard installer process to update the dll. It is also possible to write an exe that downloads and extracts which will have an arbitrary amount of logic (licensing, download location now and then...).
A combnation of both might seem an interesting thing. A bootstrapper downloading msi files and silently installing them. You could have advanced features in the installer while having the freedom to decide what and when to install on your own.
Technical aspects popping into my mind: files in use may not be changed and if you change the interface theunchanges main program won't be able to use the new library.
It seems you're searching for a plugin architechtecture, you might want to look at MEF or Unity to perform the compositiom, but that is more a side comment.
There are few SO thread available on this great website. You should explorer them and try the best way to implement whatever situation you have..
Check these reference links:
from: Creating a patch to upgrade .NET application
If you already use a a VS Setup Project you can deploy the new version
of this project and it will upgrade existing installations. Have a
look at the setup and upgrade ids. The stop and start of the service
can be done by custom actions that can be defined in the project and
will be executed i.e. when your setup is committed or rollbacked etc.
Patch development in DotNet
How to make Patch-able/Update-able application?
create patch file using .net windows application
Note: Ref this For clickonce how to build a patch for existing installer
I develop application in C# with MSVC 2010 Express, with Forms/WPF/etc.
Application consist of some private assemblies (maybe DLLs) and .exe file. It uses .NET 4 features.
How I deploy this application to other computers? Of course if they have .NET 4 I just can send zip of .exe with .dlls and it work. But if they don't have .NET at all (on Win XP machine)? Or maybe they have lower version of .NET? Should I point them to install .NET from internet or package it with my app or what?
Thanks
There is click-once deploy from microsoft. It automates most of the tasks, including making sure you have the right .Net version and updating the app if a new version of your app is available.
You should create a installer package. If you are using the express versions of visual studio, you can use some free tools for this like WiX or Inno Setup. WiX is perhaps a difficult option to start with, but has a lot of flexibility. There are tutorials and example projects to modify to adapt them to your needs.
http://www.tramontana.co.hu/wix/
This tools create installers that can check if a certain version of the .NET framework is installed on the user computer, among other conditions. You can also include the .NET redistributable in your package, or point the user to download and install it.
We try to keep deployment as simple as possible, and one of the things we do is to ensure our application is just a single executable, no support files needed.
We several steps to get there:
Make sure all dependent resource files are stored in embedded resources where possible, and not on disk
Use ILmerge to link all assemblies into a single executable
Optional - obfuscate the assembly
Optional - If some parts cannot be ILMerged or obfuscated, forcing us to have multiple files, we use Xenocode's PostBuild to link all files into a single executable. Xenocode offers a virtual filesystem to do this. This also allows framework embedding so your app will run on a clean Windows install - no dependencies need to be installed :-)
Wrap the single executable into an msi installer using WiX
Wrap the single executable into click once deployment. For this we also use a little stub launcher executable which starts the main application, allowing us to reuse the same main application executable
Create a zip file of just the single file executable for manual installation.
We the following on our downloads site:
the MSI installer - we prefer people to use this one
A zip file with the Xenocoded (single file) executable
A zip file with the Xenocoded (single file) executable including the .NET Framework
http://support.microsoft.com/kb/324733
Yes, you should point them to install .NET. Otherwise it won't be possible for them to run your application.
You didn't say what type of clients they are (are you making a small app for your friends to use or are they paying customers), but whatever the case may be, I'm always completely against sending a zip file with an instruction document describing what to do with it and what folder to extract it to. As Remy said, ClickOnce is not a bad idea, but I've found it to be a bit of a pain to set up (once you get it set up, though, it works just fine). On the other hand, a Deployment project is simpler and if I were you, that would be the first thing I'd explore.
Use xenocode here
http://spoon.net/Studio/
No need to install anything.
It converts your exe to Native code indirectly and you can run anywhere on windows system.
It also has some option of adding framework inside and the total exe size will be somewhere arround 10MB + Your application exe size..
Thanks
yes! you have to give some general instruction about prerequisites to run your software and in that you can mention the Framework version 3.5 or 4.0 and other utilities you require.
please refer this document for Choosing a Deployment Strategy in Visual studio 2010 may this can help you
http://msdn.microsoft.com/en-us/library/e2444w33.aspx
when you package you application,you shoud include the .NET Framework
Check out Inno : http://www.jrsoftware.org/isinfo.php
It's free and pretty simple.
OTOH I've seen QTTabBar using it in its' codebase and it was literally one single text file (setup.iss). Let me see if I can find URL to their SourceForge page so you can see the source and the build ... There is it http://qttabbar.svn.sourceforge.net/viewvc/qttabbar/trunk/Install/ If you grab the source tree you can probably re-fit it for your app in a day.