I have this string
TEST_TEXT_ONE_20112017
I want to eliminate _20112017, which is a underscore with numbers, those numbers can vary; my goal is to have only
TEST_TEXT_ONE
So far I have this but I get the entire string, is there something I'm missing?
Regex r = new Regex(#"\b\w+[0-9]+\b");
MatchCollection words = r.Matches("TEST_TEXT_ONE_20112017");
foreach(Match word in words)
{
string w = word.Groups[0].Value;
//I still get the entire string
}
Notes for your consideration:
You should use parenthesis to mark groups for capture -or- use named group. The first group (index=0) is the entire match. you probably want index=1 instead.
\w stands for word character and it already includes both underscore and digits. If you want to match anything before the numbers then you should consider using . instead of \w.
by default +is greedy and your \w+ will consume your last undescore and all but the very last number as well. You probably want to explicitly require an underscore before last block of numbers.
I would suggest considering if you want to find a matching substring or the entire string to match. if the latter, then consider using the start and end markers: ^ and $.
if you know you want to eliminate 8 digits, then you could giving explicit count like \d{8}
For example this should work:
Regex r = new Regex(#"^(.+)_\d+$");
MatchCollection words = r.Matches("TEST_TEXT_ONE_20112017");
foreach (Match word in words)
{
string w = word.Groups[1].Value;
}
Alternative
Use a Zero-Width Positive Lookahead Assertions construct to check what comes next without capturing it. This uses the syntax on (?=stuff). So you could use a shorter code and avoid surfing in Groups altogether:
Regex r = new Regex(#"^.+(?=_\d+$)");
String result = r.Match("TEST_TEXT_ONE_20112017").Value;
Note that we require the end marker $ within the positive lookahead group.
Regex r = new Regex(#"(\b.+)_([0-9]+)\b");
String w = r.Match("TEST_TEXT_ONE_20112017").Groups[1].Value; //TEST_TEXT_ONE
or:
String w = r.Match("TEST_TEXT_ONE_20112017").Groups[2].Value; //20112017
This seems a bit overkill for Regex in my opinion. As an alternative you could just split on the _ character and rebuild the string:
private static string RemoveDate(string input)
{
string[] parts = input.Split('_');
return string.Join("_", parts.Take(parts.Length - 1));
}
Or if the date suffix is always the same length, you could also just substring:
private static string RemoveDateFixedLength(string input)
{
//Removes last 9 characters (8 for date, 1 for underscore)
return input.Substring(0, input.Length - 9);
}
However I feel like the first approach is better, this is just another option.
Fiddle here
Related
I'm reading from a file, and need to find a string that is encapsulated by two identical non-ascii values/control seperators, in this case 'RS'
How would I go about doing this? Would I need some form of regex?
RS stands for Record Separator, and it has a value of 30 (or 0x1E in hexadecimal). You can use this regular expression:
\x1E([\w\s]*?)\x1E
That matches the RS, then matches any letter, number or space, and then again the RS. The ? is to make the regex match as less characters as possible, in case there are more RS characters afterwards.
If you prefer not to match numbers, you could use [a-zA-Z\s] instead of [\w\s].
Example:
string fileContents = "Something \u001Eyour string\u001E more things \u001Eanother text\u001E end.";
MatchCollection matches = Regex.Matches(fileContents, #"\x1E([\w\s]*?)\x1E");
if (matches.Count == 0)
return; // Not found, display an error message and exit.
foreach (Match match in matches)
{
if (match.Groups.Count > 1)
Console.WriteLine(match.Groups[1].Value);
}
As you can see, you get a collection of Match, and each match.Value will have the whole matched string including the separators. match.Groups will have all matched groups, being the first one again the whole matched string (that's by default) and then each of your groups (those between parenthesis). In this case, you only have one in your regex, so you just need the second one on that list.
Using regex you can do something like this:
string pattern = string.Format("{0}(.*){1}",firstString,secondString);
var matches = Regex.Matches(myString, pattern);
foreach (Match match in matches)
{
foreach (Capture capture in match.Captures)
{
//Do stuff, with the current you should remove firstString and secondString from the capture.Value
}
}
After that use Regex.match to find the string that match with the pattern built before.
Remember to escape all the special char for regex.
You can use Regex.Matches, I'm using X as the separator in this example:
var fileContents = "Xsomething1X Xsomething2X Xsomething3X";
var results = Regex.Matches(fileContents, #"(X).*?(\1)");
The you can loop on results to do anything you want with the matches.
The \1 in the regex means "reference first group". I've put X between () so it is going to be group 1, the I use \1 to say that the match in this place should be exactly the same as the group 1.
You don't need a regular expression for that.
Read the contents of the file (File.ReadAllText).
Split on the separator character (String.Split).
If you know there's only one occurrence of your string, take the second array element (result[1]). Otherwise, take every other entry (result.Where((x, i) => i % 2 == 1)).
I want to replace single occurrences of a character but not two in a string using C#.
For example, I want to replace & by an empty string but not when the ocurrence is &&. Another example, a&b&&c would become ab&&c after the replacement.
If I use a regex like &[^&], it will also match the character after the & and I don't want to replace it.
Another solution I found is to iterate over the string characters.
Do you know a cleaner solution to do that?
To only match one & (not preceded or followed by &), use look-arounds (?<!&) and (?!&):
(?<!&)&(?!&)
See regex demo
You tried to use a negated character class that still matches a character, and you need to use a look-ahead/look-behind to just check for some character absence/presence, without consuming it.
See regular-expressions.info:
Negative lookahead is indispensable if you want to match something not followed by something else. When explaining character classes, this tutorial explained why you cannot use a negated character class to match a q not followed by a u. Negative lookahead provides the solution: q(?!u).
Lookbehind has the same effect, but works backwards. It tells the regex engine to temporarily step backwards in the string, to check if the text inside the lookbehind can be matched there. (?<!a)b matches a "b" that is not preceded by an "a", using negative lookbehind. It doesn't match cab, but matches the b (and only the b) in bed or debt.
You can match both & and && (or any number of repetition) and only replace the single one with an empty string:
str = Regex.Replace(str, "&+", m => m.Value.Length == 1 ? "" : m.Value);
You can use this regex: #"(?<!&)&(?!&)"
var str = Regex.Replace("a&b&&c", #"(?<!&)&(?!&)", "");
Console.WriteLine(str); // ab&&c
You can go with this:
public static string replacement(string oldString, char charToRemove)
{
string newString = "";
bool found = false;
foreach (char c in oldString)
{
if (c == charToRemove && !found)
{
found = true;
continue;
}
newString += c;
}
return newString;
}
Which is as generic as possible
I would use something like this, which IMO should be better than using Regex:
public static class StringExtensions
{
public static string ReplaceFirst(this string source, char oldChar, char newChar)
{
if (string.IsNullOrEmpty(source)) return source;
int index = source.IndexOf(oldChar);
if (index < 0) return source;
var chars = source.ToCharArray();
chars[index] = newChar;
return new string(chars);
}
}
I'll contribute to this statement from the comments:
in this case, only the substring with odd number of '&' will be replaced by all the "&" except the last "&" . "&&&" would be "&&" and "&&&&" would be "&&&&"
This is a pretty neat solution using balancing groups (though I wouldn't call it particularly clean nor easy to read).
Code:
string str = "11&222&&333&&&44444&&&&55&&&&&";
str = Regex.Replace(str, "&((?:(?<2>&)(?<-2>&)?)*)", "$1$2");
Output:
11222&&333&&44444&&&&55&&&&
ideone demo
It always matches the first & (not captured).
If it's followed by an even number of &, they're matched and stored in $1. The second group is captured by the first of the pair, but then it's substracted by the second.
However, if there's there's an odd number of of &, the optional group (?<-2>&)? does not match, and the group is not substracted. Then, $2 will capture an extra &
For example, matching the subject "&&&&", the first char is consumed and it isn't captured (1). The second and third chars are matched, but $2 is substracted (2). For the last char, $2 is captured (3). The last 3 chars were stored in $1, and there's an extra & in $2.
Then, the substitution "$1$2" == "&&&&".
I have text like this
Inc12345_Month
Ted12345_Month
J8T12345_Month
What I need to do is extract the 12345 and also remove everything before it. This will be done in C#
.+?(?=\d_Monthly) was working in a regex tester online but when I put it in my code it only returned 5_Month.
Edit: the 12345 could be a variable length so I cannot [0-9] multiple times.
Edit2: Code this was just to try and remove everything before the 12345
string text = /* the above text pulled in from a file */;
Regex reg = new Regex(#".+?(?=\d+_Monthly)");
text = reg.Replace(string, "");
You can use this function to strip it:
private static Regex getNumberAndBeyondRegex = new Regex(^.{2}\D+(\d.*)$", RegexOptions.Compiled);
public static string GetNumberAndBeyond(string input)
{
var match = getNumberAndBeyondRegex.Match(input);
if (!match.Success) throw new ArgumentException("String isn't in the correct format.", "input");
return match.Groups[1].Value;
}
The regex at work is ^.{2}\D+(\d.*)$
It works by grabbing anything that's a number, after at least one character that isn't a number. It'll not only match _Month but also other endings.
The regex exists out of a few parts:
^ matches the beginning of the string
.{2} matches any two characters, to prevent a digit from matching if it's the first or 2nd character, you can increase this number to be equal to the minimum prefix length - 1
\D+ matches at least one character that isn't a number
( starts capturing a group
\d.* matches at least one number and any values beyond that
) closes the capturing group
$ matches the end of the string
There are a lot of different regex flavors, many of them have slight differences in terms of escaping, capturing, replacing and quite surely some others.
For testing .NET regexes online I use the free version of the tool RegexHero, it has an popup every now and then, but it makes up for that time by showing you live results, capture groups, and instant replacing. Next to having quite a lot of features.
If you want to match anywhere within the string, you can use the regex \d+_Month, it is very similiar to your original regex. In code:
new Regex("\d+_Month").Match(input).Value
Edit:
Based on the format you supplied in the comment I've created a regex and function to parse the entire file name:
private static Regex parseFileNameRegex = new Regex(#"^.*\D(\d+)_Month_([a-zA-Z]+)\.(\w+)$", RegexOptions.Compiled);
public static bool TryParseFileName(string fileName, out int id, out string month, out string fileExtension)
{
id = 0; month = null; fileExtension = null;
if (fileName == null) return false;
var match = parseFileNameRegex.Match(fileName);
if (!match.Success) return false;
if (!int.TryParse(match.Groups[1].Value, out id) || id < 1) return false; // Convert the ID into a number
month = match.Groups[2].Value;
fileExtension = match.Groups[3].Value;
return true;
}
In the parse function it requires the ID to be at least 1, 0 isn't accepted (and negative numbers won't match the regex), if you don't want this restriction, simply remove || id < 1 from the function.
Using the function would look like:
int id; string month, fileExtension;
if (!TryParseFileName("CompanyName_ClientName12345_Month_Nov.pdf", out id, out month, out fileExtension))
throw new FormatException("File name is incorrectly formatted."); // Do whatever you want when you get an invalid filename
// Use id, month and fileExtension here :)
The regex ^.*\D(\d+)_Month_([a-zA-Z]+)\.(\w+)$ works like:
^ matches the beginning of the string
.*\D matches at least one non-numeric character
(\d+) captures at least 1 number, this is the ID
_Month_ is the literal text in between
([a-zA-Z]+) matches and captures at least 1 letter, this is the month
\. matches a . character
(\w+) matches and captures any alphanumeric (letters and numbers), this is the file extension
$ matches the end of the string
Using :
Regex reg = new Regex(#"\D+(?=(\d+)_Monthly)");
is more explicit, the result is in Groups[1].
Part by part:
.+?
Match anything, maybe. This doesn't make any sense to me. It would be equivalent to ".*", which may or may not be what you meant.
(?=
start a group
\d
Match exactly 1 decimal, which explains what you are seeing, and the rest of the number is matched by .+? which is outside the group
_Monthly
match the literal text
)
end group
I think what you want is:
.*(?=\d+_Monthly)
I guess you are missing the + sign after \d
.+?(?=\d+_Monthly)
This should ask for one or more digits.
If you don't need anything before the number, this should work:
(\d+_Month)
I use Derek Slager's regex tester when I'm working with C# regex.
Better dotnet regular expression tester
I am trying to replace all characters inside a Regular Expression expect the number, but the number should not start with 0
How can I achieve this using Regular Expression?
I have tried multiple things like #"^([1-9]+)(0+)(\d*)"and "(?<=[1-9])0+", but those does not work
Some examples of the text could be hej:\\\\0.0.0.22, hej:22, hej:\\\\?022 and hej:\\\\?22, and the result should in all places be 22
Rather than replace, try and match against [1-9][0-9]*$ on your string. Grab the matched text.
Note that as .NET regexes match Unicode number characters if you use \d, here the regex restricts what is matched to a simple character class instead.
(note: regex assumes matches at end of line only)
According to one of your comments hej:\\\\0.011.0.022 should yield 110022. First select the relevant string part from the first non zero digit up to the last number not being zero:
([1-9].*[1-9]\d*)|[1-9]
[1-9] is the first non zero digit
.* are any number of any characters
[1-9]\d* are numbers, starting at the first non-zero digit
|[1-9] includes cases consisting of only one single non zero digit
Then remove all non digits (\D)
Match match = Regex.Match(input, #"([1-9].*[1-9]\d*)|[1-9]");
if (match.Success) {
result = Regex.Replace(match.Value, "\D", "");
} else {
result = "";
}
Use following
[1-9][0-9]*$
You don't need to do any recursion, just match that.
Here is something that you can try The87Boy you can play around with or add to the pattern as you like.
string strTargetString = #"hej:\\\\*?0222\";
string pattern = "[\\\\hej:0.?*]";
string replacement = " ";
Regex regEx = new Regex(pattern);
string newRegStr = Regex.Replace(regEx.Replace(strTargetString, replacement), #"\s+", " ");
Result from the about Example = 22
If I have a string like MCCORMIC 3H R Final 08-26-2011.dwg or even MCCORMIC SMITH 2N L Final 08-26-2011.dwg and I wanted to capture the R in the first string or the L in the second string in a variable, what is the best method for doing so? I was thinking about trying the below statement but it does not work.
string filename = "MCCORMIC 3H R Final 08-26-2011.dwg"
string WhichArea = "";
int WhichIndex = 0;
WhichIndex = filename.IndexOf("Final");
WhichArea = filename.Substring(WhichIndex - 1,1); //Trying to get the R in front of word Final
Just split by space:
var parts = filename.Split(new [] {' '},
StringSplitOptions.RemoveEmptyEntries);
WhichArea = parts[parts.Length - 3];
It looks like the file names have a very specific format, so this will work just fine.
Even with any number of spaces, using StringSplitOptions.RemoveEmptyEntries means spaces will not be part of the split result set.
Code updated to deal with both examples - thanks Nikola.
I had to do something similar, but with Mirostation drawings instead of Autocad. I used regex in my case. Here's what I did, just in case you feel like making it more complex.
string filename = "MCCORMIC 3H R Final 08-26-2011.dwg";
string filename2 = "MCCORMIC SMITH 2N L Final 08-26-2011.dwg";
Console.WriteLine(TheMatch(filename));
Console.WriteLine(TheMatch(filename2));
public string TheMatch(string filename) {
Regex reg = new Regex(#"[A-Za-z0-9]*\s*([A-Z])\s*Final .*\.dwg");
Match match = reg.Match(filename);
if(match.Success) {
return match.Groups[1].Value;
}
return String.Empty;
}
I don't think Oded's answer covers all cases. The first example has two words before the wanted letter, and the second one has three words before it.
My opinion is that the best way to get this letter is by using RegEx, assuming that the word Final always comes after the letter itself, separated by any number of spaces.
Here's the RegEx code:
using System.Text.RegularExpressions;
private string GetLetter(string fileName)
{
string pattern = "\S(?=\s*?Final)";
Match match = Regex.Match(fileName, pattern);
return match.Value;
}
And here's the explanation of RegEx pattern:
\S(?=\s*?Final)
\S // Anything other than whitespace
(?=\s*?Final) // Positive look-ahead
\s*? // Whitespace, unlimited number of repetitions, as few as possible.
Final // Exact text.