I need a regex that will only find matches where the entire string matches my query.
For instance if I do a search for movies with the name "Red October" I only want to match on that exact title (case insensitive) but not match titles like "The Hunt For Red October". Not quite sure I know how to do this. Anyone know?
Thanks!
Try the following regular expression:
^Red October$
By default, regular expressions are case sensitive. The ^ marks the start of the matching text and $ the end.
Generally, and with default settings, ^ and $ anchors are a good way of ensuring that a regex matches an entire string.
A few caveats, though:
If you have alternation in your regex, be sure to enclose your regex in a non-capturing group before surrounding it with ^ and $:
^foo|bar$
is of course different from
^(?:foo|bar)$
Also, ^ and $ can take on a different meaning (start/end of line instead of start/end of string) if certain options are set. In text editors that support regular expressions, this is usually the default behaviour. In some languages, especially Ruby, this behaviour cannot even be switched off.
Therefore there is another set of anchors that are guaranteed to only match at the start/end of the entire string:
\A matches at the start of the string.
\Z matches at the end of the string or before a final line break.
\z matches at the very end of the string.
But not all languages support these anchors, most notably JavaScript.
I know that this may be a little late to answer this, but maybe it will come handy for someone else.
Simplest way:
var someString = "...";
var someRegex = "...";
var match = Regex.Match(someString , someRegex );
if(match.Success && match.Value.Length == someString.Length){
//pass
} else {
//fail
}
Use the ^ and $ modifiers to denote where the regex pattern sits relative to the start and end of the string:
Regex.Match("Red October", "^Red October$"); // pass
Regex.Match("The Hunt for Red October", "^Red October$"); // fail
You need to enclose your regex in ^ (start of string) and $ (end of string):
^Red October$
If the string may contain regex metasymbols (. { } ( ) $ etc), I propose to use
^\QYourString\E$
\Q starts quoting all the characters until \E.
Otherwise the regex can be unappropriate or even invalid.
If the language uses regex as string parameter (as I see in the example), double slash should be used:
^\\QYourString\\E$
Hope this tip helps somebody.
Sorry, but that's a little unclear.
From what i read, you want to do simple string compare. You don't need regex for that.
string myTest = "Red October";
bool isMatch = (myTest.ToLower() == "Red October".ToLower());
Console.WriteLine(isMatch);
isMatch = (myTest.ToLower() == "The Hunt for Red October".ToLower());
You can do it like this Exemple if i only want to catch one time the letter minus a in a string and it can be check with myRegex.IsMatch()
^[^e][e]{1}[^e]$
Related
I need a regex that will only find matches where the entire string matches my query.
For instance if I do a search for movies with the name "Red October" I only want to match on that exact title (case insensitive) but not match titles like "The Hunt For Red October". Not quite sure I know how to do this. Anyone know?
Thanks!
Try the following regular expression:
^Red October$
By default, regular expressions are case sensitive. The ^ marks the start of the matching text and $ the end.
Generally, and with default settings, ^ and $ anchors are a good way of ensuring that a regex matches an entire string.
A few caveats, though:
If you have alternation in your regex, be sure to enclose your regex in a non-capturing group before surrounding it with ^ and $:
^foo|bar$
is of course different from
^(?:foo|bar)$
Also, ^ and $ can take on a different meaning (start/end of line instead of start/end of string) if certain options are set. In text editors that support regular expressions, this is usually the default behaviour. In some languages, especially Ruby, this behaviour cannot even be switched off.
Therefore there is another set of anchors that are guaranteed to only match at the start/end of the entire string:
\A matches at the start of the string.
\Z matches at the end of the string or before a final line break.
\z matches at the very end of the string.
But not all languages support these anchors, most notably JavaScript.
I know that this may be a little late to answer this, but maybe it will come handy for someone else.
Simplest way:
var someString = "...";
var someRegex = "...";
var match = Regex.Match(someString , someRegex );
if(match.Success && match.Value.Length == someString.Length){
//pass
} else {
//fail
}
Use the ^ and $ modifiers to denote where the regex pattern sits relative to the start and end of the string:
Regex.Match("Red October", "^Red October$"); // pass
Regex.Match("The Hunt for Red October", "^Red October$"); // fail
You need to enclose your regex in ^ (start of string) and $ (end of string):
^Red October$
If the string may contain regex metasymbols (. { } ( ) $ etc), I propose to use
^\QYourString\E$
\Q starts quoting all the characters until \E.
Otherwise the regex can be unappropriate or even invalid.
If the language uses regex as string parameter (as I see in the example), double slash should be used:
^\\QYourString\\E$
Hope this tip helps somebody.
Sorry, but that's a little unclear.
From what i read, you want to do simple string compare. You don't need regex for that.
string myTest = "Red October";
bool isMatch = (myTest.ToLower() == "Red October".ToLower());
Console.WriteLine(isMatch);
isMatch = (myTest.ToLower() == "The Hunt for Red October".ToLower());
You can do it like this Exemple if i only want to catch one time the letter minus a in a string and it can be check with myRegex.IsMatch()
^[^e][e]{1}[^e]$
I need a regex that will only find matches where the entire string matches my query.
For instance if I do a search for movies with the name "Red October" I only want to match on that exact title (case insensitive) but not match titles like "The Hunt For Red October". Not quite sure I know how to do this. Anyone know?
Thanks!
Try the following regular expression:
^Red October$
By default, regular expressions are case sensitive. The ^ marks the start of the matching text and $ the end.
Generally, and with default settings, ^ and $ anchors are a good way of ensuring that a regex matches an entire string.
A few caveats, though:
If you have alternation in your regex, be sure to enclose your regex in a non-capturing group before surrounding it with ^ and $:
^foo|bar$
is of course different from
^(?:foo|bar)$
Also, ^ and $ can take on a different meaning (start/end of line instead of start/end of string) if certain options are set. In text editors that support regular expressions, this is usually the default behaviour. In some languages, especially Ruby, this behaviour cannot even be switched off.
Therefore there is another set of anchors that are guaranteed to only match at the start/end of the entire string:
\A matches at the start of the string.
\Z matches at the end of the string or before a final line break.
\z matches at the very end of the string.
But not all languages support these anchors, most notably JavaScript.
I know that this may be a little late to answer this, but maybe it will come handy for someone else.
Simplest way:
var someString = "...";
var someRegex = "...";
var match = Regex.Match(someString , someRegex );
if(match.Success && match.Value.Length == someString.Length){
//pass
} else {
//fail
}
Use the ^ and $ modifiers to denote where the regex pattern sits relative to the start and end of the string:
Regex.Match("Red October", "^Red October$"); // pass
Regex.Match("The Hunt for Red October", "^Red October$"); // fail
You need to enclose your regex in ^ (start of string) and $ (end of string):
^Red October$
If the string may contain regex metasymbols (. { } ( ) $ etc), I propose to use
^\QYourString\E$
\Q starts quoting all the characters until \E.
Otherwise the regex can be unappropriate or even invalid.
If the language uses regex as string parameter (as I see in the example), double slash should be used:
^\\QYourString\\E$
Hope this tip helps somebody.
Sorry, but that's a little unclear.
From what i read, you want to do simple string compare. You don't need regex for that.
string myTest = "Red October";
bool isMatch = (myTest.ToLower() == "Red October".ToLower());
Console.WriteLine(isMatch);
isMatch = (myTest.ToLower() == "The Hunt for Red October".ToLower());
You can do it like this Exemple if i only want to catch one time the letter minus a in a string and it can be check with myRegex.IsMatch()
^[^e][e]{1}[^e]$
I have created a Regex as below, but the Match method does not work correctly:
Regex regex = new Regex("(" + SearchText + ")", RegexOptions.IgnoreCase);
if(regex.Match(item).Success) { ... }
For example, if I set SearchText to e., and i set item to es, then Success is true.
Similarly, if have set SearchText to $ or ., then a match with 4 returns Success as true.
How come this is happening, and how can I solve this problem?
When you use a regex there are a bunch of common characters which have special meanings. For example, the period (.) character will match any character at all so if you wanted to match the words dog and dig, you could use the regex d.g.
There are MANY different special characters you can use, you should see the full .NET Regex documentation for more details.
This makes matching specific things slightly more complicated when you want to match something specific, like the end of a sentence. To match dog. you actually have to pass in dog\. as the regex to match against. You can use the Regex.Escape(string str) method to escape most simple strings, before passing them into your Regex constructor.
The other question is if you are only looking for literals, why do you use Regex at all.
string item = "bla bla e. bla";
bool result = item.Contains("e."); //returns true
Edit
Case insensitive:
result = item.IndexOf("e.", 0, StringComparison.OrdinalIgnoreCase) != -1;
I need some advice. Suppose I have the following string: Read Variable
I want to find all pieces of text like this in a string and make all of them like the following:Variable = MessageBox.Show. So as aditional examples:
"Read Dog" --> "Dog = MessageBox.Show"
"Read Cat" --> "Cat = MessageBox.Show"
Can you help me? I need a fast advice using RegEx in C#. I think it is a job involving wildcards, but I do not know how to use them very well... Also, I need this for a school project tomorrow... Thanks!
Edit: This is what I have done so far and it does not work: Regex.Replace(String, "Read ", " = Messagebox.Show").
You can do this
string ns= Regex.Replace(yourString,"Read\s+(.*?)(?:\s|$)","$1 = MessageBox.Show");
\s+ matches 1 to many space characters
(.*?)(?:\s|$) matches 0 to many characters till the first space (i.e \s) or till the end of the string is reached(i.e $)
$1 represents the first captured group i.e (.*?)
You might want to clarify your question... but here goes:
If you want to match the next word after "Read " in regex, use Read (\w*) where \w is the word character class and * is the greedy match operator.
If you want to match everything after "Read " in regex, use Read (.*)$ where . will match all characters and $ means end of line.
With either regex, you can use a replace of $1 = MessageBox.Show as $1 will reference the first matched group (which was denoted by the parenthesis).
Complete code:
replacedString = Regex.Replace(inStr, #"Read (.*)$", "$1 = MessageBox.Show");
The problem with your attempt is, that it cannot know that the replacement string should be inserted after your variable. Let's assume that valid variable names contain letters, digits and underscores (which can be conveniently matched with \w). That means, any other character ends the variable name. Then you could match the variable name, capture it (using parentheses) and put it in the replacement string with $1:
output = Regex.Replace(input, #"Read\s+(\w+)", "$1 = MessageBox.Show");
Note that \s+ matches one or more arbitrary whitespace characters. \w+ matches one or more letters, digits and underscores. If you want to restrict variable names to letters only, this is the place to change it:
output = Regex.Replace(input, #"Read\s+([a-zA-Z]+)", "$1 = MessageBox.Show");
Here is a good tutorial.
Finally note, that in C# it is advisable to write regular expressions as verbatim strings (#"..."). Otherwise, you will have to double escape everything, so that the backslashes get through to the regex engine, and that really lessens the readability of the regex.
I've got a regular expression like this
something (.*) someotherthing
How do I use a Regex object to match the entire expression and get the value of the capture?
Here is an example of what I think you are asking for:
Match m = Regex.Match( "something some stuff in the middle someotherthing",
"something (.*) someotherthing" );
if ( m.Success )
Console.WriteLine( "groups={0}, entire match={1}, first group={2}",
m.Groups.Count, m.Groups[0].Value,
m.Groups[1].Value );
Where you can use $1 to get that group, you can use $0 to get the entire expression.
This works in most regex variants (may be \0 or %0 or whatever), not just C#.
Similarly, the Match.Groups property should work with 0 as an argument to return the whole match, otherwise Capture.Value looks like it contains the match.
Also worth noting, to ensure your test string matches the entire expression, it's generally a good idea to prefix with ^ and suffix with $ which are zero-width position anchors for start and end of string. (Also start/end of line in multiline mode.)
Regex.Match
http://msdn.microsoft.com/en-us/library/twcw2f1c.aspx