I currently have a portion of code that creates a new Process and executes it from the shell.
Process p = new Process();
...
p.Start();
p.WaitForExit();
This keeps the window open while the process is running, which is great. However, I also want to keep the window open after it finishes to view potential messages. Is there a way to do this?
It is easier to just capture the output from both the StandardOutput and the StandardError, store each output in a StringBuilder and use that result when the process is finished.
var sb = new StringBuilder();
Process p = new Process();
// redirect the output
p.StartInfo.RedirectStandardOutput = true;
p.StartInfo.RedirectStandardError = true;
// hookup the eventhandlers to capture the data that is received
p.OutputDataReceived += (sender, args) => sb.AppendLine(args.Data);
p.ErrorDataReceived += (sender, args) => sb.AppendLine(args.Data);
// direct start
p.StartInfo.UseShellExecute=false;
p.Start();
// start our event pumps
p.BeginOutputReadLine();
p.BeginErrorReadLine();
// until we are done
p.WaitForExit();
// do whatever you need with the content of sb.ToString();
You can add extra formatting in the sb.AppendLine statement to distinguish between standard and error output, like so: sb.AppendLine("ERR: {0}", args.Data);
This will open the shell, start your executable and keep the shell window open when the process ends
Process p = new Process();
ProcessStartInfo psi = new ProcessStartInfo();
psi.FileName = "CMD.EXE";
psi.Arguments = "/K yourmainprocess.exe";
p.StartInfo = psi;
p.Start();
p.WaitForExit();
or simply
ProcessStartInfo psi = new ProcessStartInfo();
psi.FileName = "CMD.EXE";
psi.Arguments = "/K yourmainprocess.exe";
Process p = Process.Start(psi);
if(p != null && !p.HasExited)
p.WaitForExit();
Be carefull espacially on switch /k, because in many examples is usually used /c.
CMD /K Run Command and then return to the CMD prompt.
CMD /C Run Command and then terminate
var p = new Process();
p.StartInfo.FileName = "cmd.exe";
p.StartInfo.Arguments = "/k yourmainprocess.exe";
p.Start();
p.WaitForExit();
Regarding: "Member Process.Start(ProcessStartInfo) cannot be accessed with an instance reference; qualify it with a type name instead"
This fixed the problem for me....
ProcessStartInfo psi = new ProcessStartInfo();
psi.FileName = "CMD.EXE";
psi.Arguments = "/K yourmainprocess.exe";
Process p = Process.Start(psi);
p.WaitForExit();
Related
I got 1 mapper (.exe) and 1 driver (.sys) and i want to do so that when i execute them i want to run mapper as admin with the driver and not create a window (keep it hidden). can anyone help. I have the following code down but nor does it run the mapper as admin with the spoof and it still also creates a window! help!
string map = "C:\\SCSpoofer\\mapper.exe";
Process myProcess = new Process();
myProcess.StartInfo.UseShellExecute = false;
myProcess.StartInfo.CreateNoWindow = true;
myProcess.StartInfo.Verb = "runas";
myProcess = Process.Start(map, sys);
System.Threading.Thread.Sleep(150);
myProcess.Kill();```
// Create a Process to launch a command window (hidden) to create the item templates
Process process = new Process();
ProcessStartInfo startInfo = new ProcessStartInfo();
startInfo.WindowStyle = ProcessWindowStyle.Hidden;
startInfo.FileName = "cmd.exe";
startInfo.WorkingDirectory = Project.ServicesFolder;
startInfo.Arguments = "/C " + CreateServices;
process.StartInfo = startInfo;
process.Start();
This is from my open source project DataTier.Net github.com/DataJuggler/DataTier.Net
I've been trying to create a simple application to backup my Windows Server databases aswell as a whole server backup.
For this I want to use batch files which are being executed by my application.
I tried several approaches but for some reason it always fails so I'd be happy if you could help me out.
Batch file BACKUPSERVER:
wbadmin start backup -backupTarget:D: -include:C: -allCritical -quiet
I have to run the bat as administrator or it fails due to missing permissions.
C# code:
static Task<int> RunProcessAsync(string fileName)
{
............
Process p = new Process();
p.StartInfo.UseShellExecute = false;
p.StartInfo.RedirectStandardOutput = true;
p.StartInfo.Verb = "runas";
p.StartInfo.FileName = "cmd.exe";
p.StartInfo.Arguments = "/C \"D:\\SQLBACKUP\\BACKUPSERVER.bat\"";
p.Start();
string output = p.StandardOutput.ReadToEnd();
p.WaitForExit();
}
Debugging says 'wbadmin wasnt found'. 'runas' activated or not doesn't make any difference.
ProcessStartInfo startInfo = new ProcessStartInfo();
startInfo.FileName = fileName;
startInfo.RedirectStandardOutput = true;
startInfo.RedirectStandardError = true;
startInfo.UseShellExecute = true;
startInfo.CreateNoWindow = false;
// startInfo.Verb = "runas";
var process = new Process
{
StartInfo = { FileName = fileName },
EnableRaisingEvents = true
};
process.StartInfo = startInfo;
process.Exited += (sender, args) =>
{
tcs.SetResult(process.ExitCode);
process.Dispose();
};
process.Start();
Also doesn't work.
Any ideas?
EDIT:
I'm able to run commands like shutdown but wbadmin doesn't work whatsoever...
This is how I solved the problem:
Make sure ure compiling for 64bit if u intend to use your application on 64bit system, otherwise it will redirect to different subfolders and wont find 'wbadmin.exe'.
Run wbadmin with ProcessStart or run a batch but without direct cmd input, so use this with filename = batch file or wbadmin with startInfo.Arguments:
ProcessStartInfo startInfo = new ProcessStartInfo();
startInfo.FileName = fileName;
startInfo.RedirectStandardOutput = true;
startInfo.RedirectStandardError = true;
startInfo.UseShellExecute = true;
startInfo.CreateNoWindow = false;
// startInfo.Verb = "runas";
var process = new Process
{
StartInfo = { FileName = fileName },
EnableRaisingEvents = true
};
process.StartInfo = startInfo;
process.Exited += (sender, args) =>
{
tcs.SetResult(process.ExitCode);
process.Dispose();
};
process.Start();
Make sure u request administrator rights
Thanks to #user2526830 for the code. Based on that code I added few lines to my program since I want to read the output of the SSH command. Below is my code which gives an error at line while
StandardOut has not been redirected or the process hasn't started yet.
What I want to achieve is that I want to read the output of ls into a string.
ProcessStartInfo startinfo = new ProcessStartInfo();
startinfo.FileName = #"f:\plink.exe";
startinfo.Arguments = "-ssh abc#x.x.x.x -pw abc123";
Process process = new Process();
process.StartInfo = startinfo;
process.StartInfo.UseShellExecute = false;
process.StartInfo.RedirectStandardInput = true;
process.Start();
process.StandardInput.WriteLine("ls -ltr /opt/*.tmp");
process.StandardInput.WriteLine("exit");
process.StartInfo.RedirectStandardOutput = true;
while (!process.StandardOutput.EndOfStream)
{
string line = process.StandardOutput.ReadLine();
}
process.WaitForExit();
Console.ReadKey();
Try setting standard output redirection before starting the process.
process.StartInfo.RedirectStandardOutput = true;
process.Start();
It might be that the process already terminated when you try to read the output (dues to your "exit" command). Try the below slightly modified version where I moved your while loop after the "ls" command but before the "exit" command.
It should read the output of your "ls" command fine, but unfortunately will most probably hang at some point as you will never get EndOfStream on the StandardOutput. When there is nothing more to read, ReadLine will block until it can get read another line.
So unless you know how to detect the last line of the output generated by your command and break out of the loop after you read it, you may need to use a separate thread either for reading or for writing.
ProcessStartInfo startinfo = new ProcessStartInfo();
startinfo.FileName = #"f:\plink.exe";
startinfo.Arguments = "-ssh abc#x.x.x.x -pw abc123";
Process process = new Process();
process.StartInfo = startinfo;
process.StartInfo.UseShellExecute = false;
process.StartInfo.RedirectStandardInput = true;
process.StartInfo.RedirectStandardOutput = true;
process.Start();
process.StandardInput.WriteLine("ls -ltr /opt/*.tmp");
while (!process.StandardOutput.EndOfStream)
{
string line = process.StandardOutput.ReadLine();
}
process.StandardInput.WriteLine("exit");
process.WaitForExit();
Console.ReadKey();
Is it possible to redirect just stdin but also allow stdout to be written to the console?
I have a process which starts child processes and needs to read the output of those processes, but also display it in the console. Is it possible? I tried to just create my own console process but I can't write to it unless I UseShellExecute and the purpose is to show the output in the console.
protected void startp() {
Process p = new Process();
ProcessStartInfo psi = new ProcessStartInfo();
psi.FileName = "cmd.exe";
psi.Arguments = "/k";
//Can't redirect output without UseShellExecute = false
psi.RedirectStandardInput = true;
psi.UseShellExecute = false;
psi.CreateNoWindow = false;
p.StartInfo = psi;
p.Start();
//Can't write to StandardInput with UseShellExecute = true
p.StandardInput.WriteLine("#ECHO OFF");
p.StandardInput.WriteLine("echo | set /p=Child Process");
Console.ReadLine();
p.StandardInput.WriteLine("exit");
}
I have created a Process to run command in CMD.
var process = Process.Start("CMD.exe", "/c apktool d app.apk");
process.WaitForExit();
How can I run this command without displaying actual CMD window?
You can use the WindowsStyle-Property to indicate whether the process is started in a window that is maximized, minimized, normal (neither maximized nor minimized), or not visible
process.StartInfo.WindowStyle = ProcessWindowStyle.Hidden
Source:
Property:MSDN
Enumartion: MSDN
And change your code to this, becaeuse you started the process when initializing the object, so the properties (who got set after starting the process) won't be recognized.
Process proc = new Process();
proc.StartInfo.FileName = "CMD.exe";
proc.StartInfo.Arguments = "/c apktool d app.apk";
proc.StartInfo.WindowStyle = ProcessWindowStyle.Hidden;
proc.Start();
proc.WaitForExit();
There are several issues with your program, as pointed out in the various comments and answers. I tried to address all of them here.
ProcessStartInfo psi = new ProcessStartInfo();
psi.FileName = "apktool";
//join the arguments with a space, this allows you to set "app.apk" to a variable
psi.Arguments = String.Join(" ", "d", "app.apk");
//leave it to the application, not the OS to launch the file
psi.UseShellExecute = false;
//choose to not create a window
psi.CreateNoWindow = true;
//set the window's style to 'hidden'
psi.WindowStyle = ProcessWindowStyle.Hidden;
var proc = new Process();
proc.StartInfo = psi;
proc.Start();
proc.WaitForExit();
The main issues:
using cmd /c when not necessary
starting the app without setting the properties for hiding it
Try this :
proc.StartInfo.CreateNoWindow = true;
proc.StartInfo.WindowStyle = ProcessWindowStyle.Hidden;
proc.WaitForExit();
ProcessStartInfo startInfo = new ProcessStartInfo();
startInfo.CreateNoWindow = true;
startInfo.UseShellExecute = false;
startInfo.FileName = "dcm2jpg.exe";
startInfo.WindowStyle = ProcessWindowStyle.Hidden;
startInfo.Arguments = "-f j -o \"" + ex1 + "\" -z 1.0 -s y " + ex2;