Related
Is there any difference between the following?
class C
{
// One:
public static readonly int ValueAsAMember = 42;
// Two:
public static int ValueAsAProperty { get { return 42; } }
}
I'm used to writing constants the first way (unless they're private/internal, in which case I use the const keyword), but I recently saw the second form.
Is there any advantage one way over the other in terms of readability, convention, performance, or anything else?
You have three choices:
public static readonly int Value = 42;
public static int Value { get { return 42; } }
public const int Value = 42;
Choose static readonly if the value will not change at runtime but might change in future versions of your code.
Choose a property if the value might change at runtime. Of course it won't change if you use the given code.
Choose const if the value is really a constant that will not even change in future versions (something like Math.PI or int.MinValue). And of course the use of const is limited by the type of the value.
The difference between const and static readonly is that the const value will be replaced on the call site. If you change the value of a const in a future version then all assemblies that rely on your class need to be recompiled using the new value.
The property requires a method call (calling a getter is a method call). So if the value is constant at runtime there is no need for that.
Yes, there is an advantage:
If the value gets changeable at any point in the future (e.g. in a future version of your code), in a way that it is, for example, time-dependent, you can support that in the read-only property without changing the public interface of your class.
If you have to replace a readonly field with a property, you will have to recompile any other assemblies that use your class.
There are two major differences:
The first is that fields cannot be on interfaces, whereas properties can. So if you want to use this in an interface, you have to use the property.
The second, more interesting, is that readonly fields CAN be modified, while the object is being constructed. Take the following code:
public class MyTestClass
{
public readonly int MyInt = 1;
public MyTestClass()
{
MyInt = 2;
}
}
If a caller does
new MyTestClass().MyInt
they will get 2. The same goes for static constructors for a static readonly field.
The way I see it, using the first way describes the intention of the value better - which is that it is immutable. When a person is looking at the class' interface, he will see that the value is read-only, and won't have to wonder whether it can be changed later (since in the second case he can't see the property's implementation).
An important thing to note about const declarations (I don't believe it's true for readonly) is that changing the field's value constitutes an API change, even if you're just changing the value from 42 to 41. The reason is that for consts, the value is determined during compile time, which means that if I compile a module that uses your constant, and you later change it, I will still be using the old value until I recompile my module with your new version.
readonly is nice to use on things that can only be changed in your constructor. Examples of this is typical services as interfaces when you are following the TDD pattern.
In your example const is best, it's a constant after all.
readonly
const
Cheers
I think the first line making something constant or rather readonly using readonly keyword.
and the second line is making use of a property to implement readonly. Both do the same but if you compare with the IL the property would add few extra lines of code to the dll.
The main advantage for me is with readonly you are allowed to declare it anywhere in your code. But, you will get a chance to set it only once. With the setter, you declare and set in one stroke.
Yes, there's a difference between the two.
A readonly field can only be set in the constructor.
A {get; private set;} can be set at anytime from within the class.
Example:
public class Car
{
public readonly string Name;
public string color {get; private set;}
public Car()
{
Name = "Car";
Color = "Red";
}
// will fail compilation
public void ModifyName()
{
Name = "Subaru"
}
// perfectly ok
public void ModifyColor()
{
Color = "Green"
}
}
A Property is just syntactic sugar around a field, a property without a setter is simply declared a readonly field so the compiler will allow you to set it at runtime in the constructor, because to the compiler you are referencing a readonly field. There is a larger discussion around what to use a field or property, which is not within the scope of the question. And yes its this syntactic sugar that you have to do the recompiling referenced by #SOreadytohelp. Just to be clear a property is a field with a get and set method created for it, C# will allow you to reference it like a field rather than doing an annoying call to the getter or setter everytime.
In C#, what makes a field different from a property, and when should a field be used instead of a property?
Properties expose fields. Fields should (almost always) be kept private to a class and accessed via get and set properties. Properties provide a level of abstraction allowing you to change the fields while not affecting the external way they are accessed by the things that use your class.
public class MyClass
{
// this is a field. It is private to your class and stores the actual data.
private string _myField;
// this is a property. When accessed it uses the underlying field,
// but only exposes the contract, which will not be affected by the underlying field
public string MyProperty
{
get
{
return _myField;
}
set
{
_myField = value;
}
}
// This is an AutoProperty (C# 3.0 and higher) - which is a shorthand syntax
// used to generate a private field for you
public int AnotherProperty { get; set; }
}
#Kent points out that Properties are not required to encapsulate fields, they could do a calculation on other fields, or serve other purposes.
#GSS points out that you can also do other logic, such as validation, when a property is accessed, another useful feature.
Object orientated programming principles say that, the internal workings of a class should be hidden from the outside world. If you expose a field you're in essence exposing the internal implementation of the class. Therefore we wrap fields with Properties (or methods in Java's case) to give us the ability to change the implementation without breaking code depending on us. Seeing as we can put logic in the Property also allows us to perform validation logic etc if we need it.
C# 3 has the possibly confusing notion of autoproperties. This allows us to simply define the Property and the C#3 compiler will generate the private field for us.
public class Person
{
private string _name;
public string Name
{
get
{
return _name;
}
set
{
_name = value;
}
}
public int Age{get;set;} //AutoProperty generates private field for us
}
An important difference is that interfaces can have properties but not fields. This, to me, underlines that properties should be used to define a class's public interface while fields are meant to be used in the private, internal workings of a class. As a rule I rarely create public fields and similarly I rarely create non-public properties.
I'll give you a couple examples of using properties that might get the gears turning:
Lazy Initialization: If you have a property of an object that's expensive to load, but isn't accessed all that much in normal runs of the code, you can delay its loading via the property. That way, it's just sitting there, but the first time another module tries to call that property, it checks if the underlying field is null - if it is, it goes ahead and loads it, unknown to the calling module. This can greatly speed up object initialization.
Dirty Tracking: Which I actually learned about from my own question here on StackOverflow. When I have a lot of objects which values might have changed during a run, I can use the property to track if they need to be saved back to the database or not. If not a single property of an object has changed, the IsDirty flag won't get tripped, and therefore the saving functionality will skip over it when deciding what needs to get back to the database.
Using Properties, you can raise an event, when the value of the property is changed (aka. PropertyChangedEvent) or before the value is changed to support cancellation.
This is not possible with (direct access to) fields.
public class Person {
private string _name;
public event EventHandler NameChanging;
public event EventHandler NameChanged;
public string Name{
get
{
return _name;
}
set
{
OnNameChanging();
_name = value;
OnNameChanged();
}
}
private void OnNameChanging(){
NameChanging?.Invoke(this,EventArgs.Empty);
}
private void OnNameChanged(){
NameChanged?.Invoke(this,EventArgs.Empty);
}
}
Since many of them have explained with technical pros and cons of Properties and Field, it's time to get into real time examples.
1. Properties allows you to set the read-only access level
Consider the case of dataTable.Rows.Count and dataTable.Columns[i].Caption. They come from the class DataTable and both are public to us. The difference in the access-level to them is that we cannot set value to dataTable.Rows.Count but we can read and write to dataTable.Columns[i].Caption. Is that possible through Field? No!!! This can be done with Properties only.
public class DataTable
{
public class Rows
{
private string _count;
// This Count will be accessable to us but have used only "get" ie, readonly
public int Count
{
get
{
return _count;
}
}
}
public class Columns
{
private string _caption;
// Used both "get" and "set" ie, readable and writable
public string Caption
{
get
{
return _caption;
}
set
{
_caption = value;
}
}
}
}
2. Properties in PropertyGrid
You might have worked with Button in Visual Studio. Its properties are shown in the PropertyGrid like Text,Name etc. When we drag and drop a button, and when we click the properties, it will automatically find the class Button and filters Properties and show that in PropertyGrid (where PropertyGrid won't show Field even though they are public).
public class Button
{
private string _text;
private string _name;
private string _someProperty;
public string Text
{
get
{
return _text;
}
set
{
_text = value;
}
}
public string Name
{
get
{
return _name;
}
set
{
_name = value;
}
}
[Browsable(false)]
public string SomeProperty
{
get
{
return _someProperty;
}
set
{
_someProperty= value;
}
}
In PropertyGrid, the properties Name and Text will be shown, but not SomeProperty. Why??? Because Properties can accept Attributes. It does not show in case where [Browsable(false)] is false.
3. Can execute statements inside Properties
public class Rows
{
private string _count;
public int Count
{
get
{
return CalculateNoOfRows();
}
}
public int CalculateNoOfRows()
{
// Calculation here and finally set the value to _count
return _count;
}
}
4. Only Properties can be used in Binding Source
Binding Source helps us to decrease the number of lines of code. Fields are not accepted by BindingSource. We should use Properties for that.
5. Debugging mode
Consider we are using Field to hold a value. At some point we need to debug and check where the value is getting null for that field. It will be difficult to do where the number of lines of code are more than 1000. In such situations we can use Property and can set debug mode inside Property.
public string Name
{
// Can set debug mode inside get or set
get
{
return _name;
}
set
{
_name = value;
}
}
DIFFERENCES - USES (when and why)
A field is a variable that is declared directly in a class or struct. A class or struct may have instance fields or static fields or both. Generally, you should use fields only for variables that have private or protected accessibility. Data that your class exposes to client code should be provided through methods, properties and indexers. By using these constructs for indirect access to internal fields, you can guard against invalid input values.
A property is a member that provides a flexible mechanism to read, write, or compute the value of a private field. Properties can be used as if they are public data members, but they are actually special methods called accessors. This enables data to be accessed easily and still helps promote the safety and flexibility of methods.
Properties enable a class to expose a public way of getting and setting values, while hiding implementation or verification code. A get property accessor is used to return the property value, and a set accessor is used to assign a new value.
Though fields and properties look to be similar to each other, they are 2 completely different language elements.
Fields are the only mechanism how to store data on class level. Fields are conceptually variables at class scope. If you want to store some data to instances of your classes (objects) you need to use fields. There is no other choice. Properties can't store any data even though, it may look they are able to do so. See bellow.
Properties on the other hand never store data. They are just the pairs of methods (get and set) that can be syntactically called in a similar way as fields and in most cases they access (for read or write) fields, which is the source of some confusion. But because property methods are (with some limitations like fixed prototype) regular C# methods they can do whatever regular methods can do. It means they can have 1000 lines of code, they can throw exceptions, call another methods, can be even virtual, abstract or overridden. What makes properties special, is the fact that C# compiler stores some extra metadata into assemblies that can be used to search for specific properties - widely used feature.
Get and set property methods has the following prototypes.
PROPERTY_TYPE get();
void set(PROPERTY_TYPE value);
So it means that properties can be 'emulated' by defining a field and 2 corresponding methods.
class PropertyEmulation
{
private string MSomeValue;
public string GetSomeValue()
{
return(MSomeValue);
}
public void SetSomeValue(string value)
{
MSomeValue=value;
}
}
Such property emulation is typical for programming languages that don't support properties - like standard C++. In C# there you should always prefer properties as the way how to access to your fields.
Because only the fields can store a data, it means that more fields class contains, more memory objects of such class will consume. On the other hand, adding new properties into a class doesn't make objects of such class bigger. Here is the example.
class OneHundredFields
{
public int Field1;
public int Field2;
...
public int Field100;
}
OneHundredFields Instance=new OneHundredFields() // Variable 'Instance' consumes 100*sizeof(int) bytes of memory.
class OneHundredProperties
{
public int Property1
{
get
{
return(1000);
}
set
{
// Empty.
}
}
public int Property2
{
get
{
return(1000);
}
set
{
// Empty.
}
}
...
public int Property100
{
get
{
return(1000);
}
set
{
// Empty.
}
}
}
OneHundredProperties Instance=new OneHundredProperties() // !!!!! Variable 'Instance' consumes 0 bytes of memory. (In fact a some bytes are consumed becasue every object contais some auxiliarity data, but size doesn't depend on number of properties).
Though property methods can do anything, in most cases they serve as a way how to access objects' fields. If you want to make a field accessible to other classes you can do by 2 ways.
Making fields as public - not advisable.
Using properties.
Here is a class using public fields.
class Name
{
public string FullName;
public int YearOfBirth;
public int Age;
}
Name name=new Name();
name.FullName="Tim Anderson";
name.YearOfBirth=1979;
name.Age=40;
While the code is perfectly valid, from design point of view, it has several drawbacks. Because fields can be both read and written, you can't prevent user from writing to fields. You can apply readonly keyword, but in this way, you have to initialize readonly fields only in constructor. What's more, nothing prevents you to store invalid values into your fields.
name.FullName=null;
name.YearOfBirth=2200;
name.Age=-140;
The code is valid, all assignments will be executed though they are illogical. Age has a negative value, YearOfBirth is far in future and doesn't correspond to Age and FullName is null. With fields you can't prevent users of class Name to make such mistakes.
Here is a code with properties that fixes these issues.
class Name
{
private string MFullName="";
private int MYearOfBirth;
public string FullName
{
get
{
return(MFullName);
}
set
{
if (value==null)
{
throw(new InvalidOperationException("Error !"));
}
MFullName=value;
}
}
public int YearOfBirth
{
get
{
return(MYearOfBirth);
}
set
{
if (MYearOfBirth<1900 || MYearOfBirth>DateTime.Now.Year)
{
throw(new InvalidOperationException("Error !"));
}
MYearOfBirth=value;
}
}
public int Age
{
get
{
return(DateTime.Now.Year-MYearOfBirth);
}
}
public string FullNameInUppercase
{
get
{
return(MFullName.ToUpper());
}
}
}
The updated version of class has the following advantages.
FullName and YearOfBirth are checked for invalid values.
Age is not writtable. It's callculated from YearOfBirth and current year.
A new property FullNameInUppercase converts FullName to UPPER CASE. This is a little contrived example of property usage, where properties are commonly used to present field values in the format that is more appropriate for user - for instance using current locale on specific numeric of DateTime format.
Beside this, properties can be defined as virtual or overridden - simply because they are regular .NET methods. The same rules applies for such property methods as for regular methods.
C# also supports indexers which are the properties that have an index parameter in property methods. Here is the example.
class MyList
{
private string[] MBuffer;
public MyList()
{
MBuffer=new string[100];
}
public string this[int Index]
{
get
{
return(MBuffer[Index]);
}
set
{
MBuffer[Index]=value;
}
}
}
MyList List=new MyList();
List[10]="ABC";
Console.WriteLine(List[10]);
Since C# 3.0 allows you to define automatic properties. Here is the example.
class AutoProps
{
public int Value1
{
get;
set;
}
public int Value2
{
get;
set;
}
}
Even though class AutoProps contains only properties (or it looks like), it can store 2 values and size of objects of this class is equal to sizeof(Value1)+sizeof(Value2)=4+4=8 bytes.
The reason for this is simple. When you define an automatic property, C# compiler generates automatic code that contains hidden field and a property with property methods accessing this hidden field. Here is the code compiler produces.
Here is a code generated by the ILSpy from compiled assembly. Class contains generated hidden fields and properties.
internal class AutoProps
{
[CompilerGenerated]
[DebuggerBrowsable(DebuggerBrowsableState.Never)]
private int <Value1>k__BackingField;
[CompilerGenerated]
[DebuggerBrowsable(DebuggerBrowsableState.Never)]
private int <Value2>k__BackingField;
public int Value1
{
[CompilerGenerated]
get
{
return <Value1>k__BackingField;
}
[CompilerGenerated]
set
{
<Value1>k__BackingField = value;
}
}
public int Value2
{
[CompilerGenerated]
get
{
return <Value2>k__BackingField;
}
[CompilerGenerated]
set
{
<Value2>k__BackingField = value;
}
}
}
So, as you can see, the compiler still uses the fields to store the values - since fields are the only way how to store values into objects.
So as you can see, though properties and fields have similar usage syntax they are very different concepts. Even if you use automatic properties or events - hidden fields are generated by compiler where the real data are stored.
If you need to make a field value accessible to the outside world (users of your class) don't use public or protected fields. Fields always should be marked as private. Properties allow you to make value checks, formatting, conversions etc. and generally make your code safer, more readable and more extensible for future modifications.
Properties have the primary advantage of allowing you to change the way data on an object is accessed without breaking it's public interface. For example, if you need to add extra validation, or to change a stored field into a calculated you can do so easily if you initially exposed the field as a property. If you just exposed a field directly, then you would have to change the public interface of your class to add the new functionality. That change would break existing clients, requiring them to be recompiled before they could use the new version of your code.
If you write a class library designed for wide consumption (like the .NET Framework, which is used by millions of people), that can be a problem. However, if you are writing a class used internally inside a small code base (say <= 50 K lines), it's really not a big deal, because no one would be adversely affected by your changes. In that case it really just comes down to personal preference.
Properties support asymmetric access, i.e. you can have either a getter and a setter or just one of the two. Similarly properties support individual accessibility for getter/setter. Fields are always symmetric, i.e. you can always both get and set the value. Exception to this is readonly fields which obviously cannot be set after initialization.
Properties may run for a very long time, have side effects, and may even throw exceptions. Fields are fast, with no side effects, and will never throw exceptions. Due to side effects a property may return a different value for each call (as may be the case for DateTime.Now, i.e. DateTime.Now is not always equal to DateTime.Now). Fields always return the same value.
Fields may be used for out / ref parameters, properties may not.
Properties support additional logic – this could be used to implement lazy loading among other things.
Properties support a level of abstraction by encapsulating whatever it means to get/set the value.
Use properties in most / all cases, but try to avoid side effects.
In the background a property is compiled into methods. So a Name property is compiled into get_Name() and set_Name(string value). You can see this if you study the compiled code.
So there is a (very) small performance overhead when using them. Normally you will always use a Property if you expose a field to the outside, and you will often use it internally if you need to do validation of the value.
When you want your private variable(field) to be accessible to object of your class from other classes you need to create properties for those variables.
for example if I have variables named as "id" and "name" which is private
but there might be situation where this variable needed for read/write operation outside of the class. At that situation , property can help me to get that variable to read/write depending upon the get/set defined for the property. A property can be a readonly / writeonly / readwrite both.
here is the demo
class Employee
{
// Private Fields for Employee
private int id;
private string name;
//Property for id variable/field
public int EmployeeId
{
get
{
return id;
}
set
{
id = value;
}
}
//Property for name variable/field
public string EmployeeName
{
get
{
return name;
}
set
{
name = value;
}
}
}
class MyMain
{
public static void Main(string [] args)
{
Employee aEmployee = new Employee();
aEmployee.EmployeeId = 101;
aEmployee.EmployeeName = "Sundaran S";
}
}
The second question here, "when should a field be used instead of a property?", is only briefly touched on in this other answer and kinda this one too, but not really much detail.
In general, all the other answers are spot-on about good design: prefer exposing properties over exposing fields. While you probably won't regularly find yourself saying "wow, imagine how much worse things would be if I had made this a field instead of a property", it's so much more rare to think of a situation where you would say "wow, thank God I used a field here instead of a property."
But there's one advantage that fields have over properties, and that's their ability to be used as "ref" / "out" parameters. Suppose you have a method with the following signature:
public void TransformPoint(ref double x, ref double y);
and suppose that you want to use that method to transform an array created like this:
System.Windows.Point[] points = new Point[1000000];
Initialize(points);
Here's I think the fastest way to do it, since X and Y are properties:
for (int i = 0; i < points.Length; i++)
{
double x = points[i].X;
double y = points[i].Y;
TransformPoint(ref x, ref y);
points[i].X = x;
points[i].Y = y;
}
And that's going to be pretty good! Unless you have measurements that prove otherwise, there's no reason to throw a stink. But I believe it's not technically guaranteed to be as fast as this:
internal struct MyPoint
{
internal double X;
internal double Y;
}
// ...
MyPoint[] points = new MyPoint[1000000];
Initialize(points);
// ...
for (int i = 0; i < points.Length; i++)
{
TransformPoint(ref points[i].X, ref points[i].Y);
}
Doing some measurements myself, the version with fields takes about 61% of the time as the version with properties (.NET 4.6, Windows 7, x64, release mode, no debugger attached). The more expensive the TransformPoint method gets, the less pronounced that the difference becomes. To repeat this yourself, run with the first line commented-out and with it not commented-out.
Even if there were no performance benefits for the above, there are other places where being able to use ref and out parameters might be beneficial, such as when calling the Interlocked or Volatile family of methods. Note: In case this is new to you, Volatile is basically a way to get at the same behavior provided by the volatile keyword. As such, like volatile, it doesn't magically solve all thread-safety woes like its name suggests that it might.
I definitely don't want to seem like I'm advocating that you go "oh, I should start exposing fields instead of properties." The point is that if you need to regularly use these members in calls that take "ref" or "out" parameters, especially on something that might be a simple value type that's unlikely to ever need any of the value-added elements of properties, an argument can be made.
Also, properties allow you to use logic when setting values.
So you can say you only want to set a value to an integer field, if the value is greater than x, otherwise throw an exception.
Really useful feature.
(This should really be a comment, but I can't post a comment, so please excuse if it is not appropriate as a post).
I once worked at a place where the recommended practice was to use public fields instead of properties when the equivalent property def would just have been accessing a field, as in :
get { return _afield; }
set { _afield = value; }
Their reasoning was that the public field could be converted into a property later in future if required. It seemed a little strange to me at the time. Judging by these posts, it looks like not many here would agree either. What might you have said to try to change things ?
Edit : I should add that all of the code base at this place was compiled at the same time, so they might have thought that changing the public interface of classes (by changing a public field to a property) was not a problem.
Technically, i don't think that there is a difference, because properties are just wrappers around fields created by the user or automatically created by the compiler.The purpose of properties is to enforce encapsuation and to offer a lightweight method-like feature.
It's just a bad practice to declare fields as public, but it does not have any issues.
Fields are ordinary member variables or member instances of a class. Properties are an abstraction to get and set their values. Properties are also called accessors because they offer a way to change and retrieve a field if you expose a field in the class as private. Generally, you should declare your member variables private, then declare or define properties for them.
class SomeClass
{
int numbera; //Field
//Property
public static int numbera { get; set;}
}
If you are going to use thread primitives you are forced to use fields. Properties can break your threaded code. Apart from that, what cory said is correct.
My design of a field is that a field needs to be modified only by its parent, hence the class. Result the variable becomes private, then to be able to give the right to read the classes / methods outside I go through the system of property with only the Get. The field is then retrieved by the property and read-only! If you want to modify it you have to go through methods (for example the constructor) and I find that thanks to this way of making you secure, we have better control over our code because we "flange". One could very well always put everything in public so every possible case, the notion of variables / methods / classes etc ... in my opinion is just an aid to the development, maintenance of the code. For example, if a person resumes a code with public fields, he can do anything and therefore things "illogical" in relation to the objective, the logic of why the code was written. It's my point of view.
When i use a classic model private field / public readonly properties,for 10 privates fields i should write 10 publics properties! The code can be really big faster. I discover the private setter and now i only use public properties with a private setter.
The setter create in background a private field.
That why my old classic programming style was:
public class MyClass
{
private int _id;
public int ID { get { return _id; } }
public MyClass(int id)
{
_id = id;
}
}
My new programming style:
public class MyClass
{
public int ID { get; private set; }
public MyClass(int id)
{
ID = id;
}
}
Basic and general difference is:
Fields
ALWAYS give both get and set access
CAN NOT cause side effects (throwing exceptions, calling methods, changing fields except the one being got/set, etc)
Properties
NOT ALWAYS give both get and set access
CAN cause side effects
Properties encapsulate fields, thus enabling you to perform additional processing on the value to be set or retrieved. It is typically overkill to use properties if you will not be doing any pre- or postprocessing on the field value.
IMO, Properties are just the "SetXXX()" "GetXXX()" functions/methods/interfaces pairs we used before, but they are more concise and elegant.
Traditionally private fields are set via getter and setter methods. For the sake of less code you can use properties to set fields instead.
when you have a class which is "Car". The properties are color,shape..
Where as fields are variables defined within the scope of a class.
From Wikipedia -- Object-oriented programming:
Object-oriented programming (OOP) is a programming paradigm based on the concept of "objects", which are data structures that contain data, in the form of fields, often known as attributes; and code, in the form of procedures, often known as methods. (emphasis added)
Properties are actually part of an object's behavior, but are designed to give consumers of the object the illusion/abstraction of working with the object's data.
Properties are special kind of class member, In properties we use a predefined Set or Get method.They use accessors through which we can read, written or change the values of the private fields.
For example, let us take a class named Employee, with private fields for name, age and Employee_Id. We cannot access these fields from outside the class , but we can access these private fields through properties.
Why do we use properties?
Making the class field public & exposing it is risky, as you will not have control what gets assigned & returned.
To understand this clearly with an example lets take a student class who have ID, passmark, name. Now in this example some problem with public field
ID should not be -ve.
Name can not be set to null
Pass mark should be read only.
If student name is missing No Name should be return.
To remove this problem We use Get and set method.
// A simple example
public class student
{
public int ID;
public int passmark;
public string name;
}
public class Program
{
public static void Main(string[] args)
{
student s1 = new student();
s1.ID = -101; // here ID can't be -ve
s1.Name = null ; // here Name can't be null
}
}
Now we take an example of get and set method
public class student
{
private int _ID;
private int _passmark;
private string_name ;
// for id property
public void SetID(int ID)
{
if(ID<=0)
{
throw new exception("student ID should be greater then 0");
}
this._ID = ID;
}
public int getID()
{
return_ID;
}
}
public class programme
{
public static void main()
{
student s1 = new student ();
s1.SetID(101);
}
// Like this we also can use for Name property
public void SetName(string Name)
{
if(string.IsNullOrEmpty(Name))
{
throw new exeception("name can not be null");
}
this._Name = Name;
}
public string GetName()
{
if( string.IsNullOrEmpty(This.Name))
{
return "No Name";
}
else
{
return this._name;
}
}
// Like this we also can use for Passmark property
public int Getpassmark()
{
return this._passmark;
}
}
Additional info:
By default, get and set accessors are as accessible as the property itself.
You can control/restrict accessor accessibility individually (for get and set) by applying more restrictive access modifiers on them.
Example:
public string Name
{
get
{
return name;
}
protected set
{
name = value;
}
}
Here get is still publicly accessed (as the property is public), but set is protected (a more restricted access specifier).
Think about it : You have a room and a door to enter this room. If you want to check how who is coming in and secure your room, then you should use properties otherwise they won't be any door and every one easily come in w/o any regulation
class Room {
public string sectionOne;
public string sectionTwo;
}
Room r = new Room();
r.sectionOne = "enter";
People is getting in to sectionOne pretty easily, there wasn't any checking
class Room
{
private string sectionOne;
private string sectionTwo;
public string SectionOne
{
get
{
return sectionOne;
}
set
{
sectionOne = Check(value);
}
}
}
Room r = new Room();
r.SectionOne = "enter";
Now you checked the person and know about whether he has something evil with him
Fields are the variables in classes. Fields are the data which you can encapsulate through the use of access modifiers.
Properties are similar to Fields in that they define states and the data associated with an object.
Unlike a field a property has a special syntax that controls how a person reads the data and writes the data, these are known as the get and set operators. The set logic can often be used to do validation.
Properties are used to expose field. They use accessors(set, get) through which the values of the private fields can be read, written or manipulated.
Properties do not name the storage locations. Instead, they have accessors that read, write, or compute their values.
Using properties we can set validation on the type of data that is set on a field.
For example we have private integer field age on that we should allow positive values since age cannot be negative.
We can do this in two ways using getter and setters and using property.
Using Getter and Setter
// field
private int _age;
// setter
public void set(int age){
if (age <=0)
throw new Exception();
this._age = age;
}
// getter
public int get (){
return this._age;
}
Now using property we can do the same thing. In the value is a key word
private int _age;
public int Age{
get{
return this._age;
}
set{
if (value <= 0)
throw new Exception()
}
}
Auto Implemented property if we don't logic in get and set accessors we can use auto implemented property.
When use auto-implemented property compiles creates a private, anonymous field that can only be accessed through get and set accessors.
public int Age{get;set;}
Abstract Properties
An abstract class may have an abstract property, which should be implemented in the derived class
public abstract class Person
{
public abstract string Name
{
get;
set;
}
public abstract int Age
{
get;
set;
}
}
// overriden something like this
// Declare a Name property of type string:
public override string Name
{
get
{
return name;
}
set
{
name = value;
}
}
We can privately set a property
In this we can privately set the auto property(set with in the class)
public int MyProperty
{
get; private set;
}
You can achieve same with this code. In this property set feature is not available as we have to set value to field directly.
private int myProperty;
public int MyProperty
{
get { return myProperty; }
}
Is there any difference between the following?
class C
{
// One:
public static readonly int ValueAsAMember = 42;
// Two:
public static int ValueAsAProperty { get { return 42; } }
}
I'm used to writing constants the first way (unless they're private/internal, in which case I use the const keyword), but I recently saw the second form.
Is there any advantage one way over the other in terms of readability, convention, performance, or anything else?
You have three choices:
public static readonly int Value = 42;
public static int Value { get { return 42; } }
public const int Value = 42;
Choose static readonly if the value will not change at runtime but might change in future versions of your code.
Choose a property if the value might change at runtime. Of course it won't change if you use the given code.
Choose const if the value is really a constant that will not even change in future versions (something like Math.PI or int.MinValue). And of course the use of const is limited by the type of the value.
The difference between const and static readonly is that the const value will be replaced on the call site. If you change the value of a const in a future version then all assemblies that rely on your class need to be recompiled using the new value.
The property requires a method call (calling a getter is a method call). So if the value is constant at runtime there is no need for that.
Yes, there is an advantage:
If the value gets changeable at any point in the future (e.g. in a future version of your code), in a way that it is, for example, time-dependent, you can support that in the read-only property without changing the public interface of your class.
If you have to replace a readonly field with a property, you will have to recompile any other assemblies that use your class.
There are two major differences:
The first is that fields cannot be on interfaces, whereas properties can. So if you want to use this in an interface, you have to use the property.
The second, more interesting, is that readonly fields CAN be modified, while the object is being constructed. Take the following code:
public class MyTestClass
{
public readonly int MyInt = 1;
public MyTestClass()
{
MyInt = 2;
}
}
If a caller does
new MyTestClass().MyInt
they will get 2. The same goes for static constructors for a static readonly field.
The way I see it, using the first way describes the intention of the value better - which is that it is immutable. When a person is looking at the class' interface, he will see that the value is read-only, and won't have to wonder whether it can be changed later (since in the second case he can't see the property's implementation).
An important thing to note about const declarations (I don't believe it's true for readonly) is that changing the field's value constitutes an API change, even if you're just changing the value from 42 to 41. The reason is that for consts, the value is determined during compile time, which means that if I compile a module that uses your constant, and you later change it, I will still be using the old value until I recompile my module with your new version.
readonly is nice to use on things that can only be changed in your constructor. Examples of this is typical services as interfaces when you are following the TDD pattern.
In your example const is best, it's a constant after all.
readonly
const
Cheers
I think the first line making something constant or rather readonly using readonly keyword.
and the second line is making use of a property to implement readonly. Both do the same but if you compare with the IL the property would add few extra lines of code to the dll.
The main advantage for me is with readonly you are allowed to declare it anywhere in your code. But, you will get a chance to set it only once. With the setter, you declare and set in one stroke.
Yes, there's a difference between the two.
A readonly field can only be set in the constructor.
A {get; private set;} can be set at anytime from within the class.
Example:
public class Car
{
public readonly string Name;
public string color {get; private set;}
public Car()
{
Name = "Car";
Color = "Red";
}
// will fail compilation
public void ModifyName()
{
Name = "Subaru"
}
// perfectly ok
public void ModifyColor()
{
Color = "Green"
}
}
A Property is just syntactic sugar around a field, a property without a setter is simply declared a readonly field so the compiler will allow you to set it at runtime in the constructor, because to the compiler you are referencing a readonly field. There is a larger discussion around what to use a field or property, which is not within the scope of the question. And yes its this syntactic sugar that you have to do the recompiling referenced by #SOreadytohelp. Just to be clear a property is a field with a get and set method created for it, C# will allow you to reference it like a field rather than doing an annoying call to the getter or setter everytime.
I've been wondering for a while why C# doesn't support const on a class or a method level. I know that Jon Skeet have wanted support for immutability for a long time, and I recon that using the C++ syntax of function const could aid in that. By adding a const keyword on a class level we would have total support.
Now, my question is, what the reason is for the C# team to not have developed this kind of support?
I'd imagine everything could be created with a compile-time check or through attributes, without needing to change the CLR. I don't mind code being able to override the const behavior through reflection.
Imagine this:
const class NumberContainer
{
public int Number { get; }
}
.. Such a class could only be populated at construction time, so we'd need a constructor to take in an int.
Another example is const on a method-level:
public int AddNumbers(NumberContainer n1, NumberContainer n2) const
{
return n1.Number + n2.Number;
}
Const-level methods should not be able to alter state in their own class or instances of reference types passed to them. Also, const-level functions could only invoke other const-level functions while in their scope.
I'm not really sure if lambdas and delegates would make everything too hard (or impossible) to achieve, but I'm sure someone with more experience in language and compiler design could tell me.
As Steve B pointed out in the comments, the existence of readonly makes things a bit more complex, as const and readonly are close to the same during runtime, but readonly values can't be determined during compile-time. I guess we could have const and readonly level but that might be too confusing?
So, what's the reason for not implementing this? Usability concerns (understanding constness in C++ usually quite hard for new users), language design concerns (can't be done) or simply priority concerns (the days of the immutability-buzz are over)..?
Risking a somewhat circular explanation, C# doesn't support const because the CLR has no support for it whatsoever. The CLR doesn't support it because it is drastically non-CLS compliant.
There are very few languages that have the concept. The C language has support for const, that's well supported in C# by readonly keyword. But the big dog is of course C++ that has a much wider applicability for const, no doubt the one you are looking for. I'll avoid pinning down what const should mean, that's a wormhole in itself and just talk of "const-ness", the property of having const applied.
The trouble with const-ness is that it needs to be enforced. That's a problem in C# when an arbitrary other language can use a C# class and completely ignore const-ness just because the language doesn't support it. Bolting it onto every other CLS language just because C# supports it is of course very unpractical.
Enforceability is a problem in C++ as well. Because the language also supports const_cast<>. Any client code can cast the const-ness away swiftly and undiagnosably. You are not supposed to, but then sometimes you have to. Because there are two kinds of const-ness, strict and observable. Roughly analogous to private const-ness and public const-ness. The mutable keyword was added to the language later to try to deal with the need for observable const-ness so at least the inevitable usage of const_cast<> could be avoided. Some people say that C++ is a difficult language. Don't hear that of C# much.
You say the CLR wouldn't need to be changed, but consider that there's no standard way to express this "const"ness within compiled assemblies - and that these assemblies might not be consumed by C# code anyway. It's not something you can just do for C# - you'd have to do it for all .NET languages.
As I believe the case to be, const means different things in C# compared to C++.
In C# you can use the readonly keyword to get the level of functionality you're wanting from const.
I was once surpised by the following situation:
class Vector
{
private double[] m_data;
public int Dimension {get;set;}
public double this[int i]
{
get {return m_data[i];}
set {m_data[i] = value;}
}
public Vector(int n)
{
this.Dimension = n;
this.m_data = new double(n);
}
public static Vector Zero(int n)
{
Vector v = new Vector(n);
for (int i = 0; i < n; i++)
{
v[i] = 0.0;
}
return v;
}
public static readonly Vector Zero3 = Zero(3);
}
Thou Vector.Zero3 is readonly and you cannot assign to it, you can still access its component, and then the following stupid thing happens:
Vector a = Vector.Zero3;
a[0] = 2.87;
and now, since a ist nothing but a reference to Vector.Vector3 the latter also has Vector.Vector3[0] == 2.87!
After I fell into this pit once, I invented a very simple hack, though not being elegant, fulfills its function.
Namely, into a class that I suppose to produce static readonly "constants", I introduce a Boolean flag:
class Vector
{
private double[] m_data;
public int Dimension {get;set;}
private bool m_bIsConstant = false;
...
public double this[int i]
{
get {return m_data[i];}
set
{
if (!m_bIsConstant)
{
m_data[i] = value;
}
}
}
...
public static Vector Zero(int n)
{
Vector v = new Vector(n);
for (int i = 0; i < n; i++)
{
v[i] = 0.0;
}
v.m_bIsConstant = true;
return v;
}
...
}
This hack guarantees that your static readonly variable will never be modified.
In the case of your proposal for a const-class, you say:
Such a class could only be populated at construction time, so we'd need a constructor to take in an int
But by making all properties read-only anyway you have already achieved what you've said.
I cannot speak for the C# language designers but maybe the reason of not having const applied to lots of other constructs is because adding it was simply not worth the effort and you can get around the issue in other ways (as described above and in other answers/comments).
I can't tell from your question, how this overloading of the const keyword would be especially beneficial.
Your first example could be rewritten legally as
public class NumberContainer
{
private readonly int number;
public NumberContainer(int number)
{
this.number = number;
}
public int Number
{
get { return number; }
}
}
Perhaps, if the compiler is unable to discern the immutability of this class (I don't know), some attribute could be useful?
In your second example, I do not understand what you are driving at. If a function returns a constant value then it can be replaced with a constant field.
Sometimes you have a private field that backs a property, you only ever want to set the field via the property setter so that additional processing can be done whenever the field changes. The problem is that it's still easy to accidentally bypass the property setter from within other methods of the same class and not notice that you've done so. Is there a way in C# to work around this or a general design principle to avoid it?
IMHO, it is not used, because:
The class must trust itself
If your class gets as large that one part does not know the other, it should be divided.
If the logic behind the property is slightly more complex, consider to encapsulate it in an own type.
I'd consider this a nasty hack and try to avoid it if possible, but...
You can mark the backing field as obsolete so that the compiler will generate a warning when you try to access it, and then suppress that warning for the property getter/setter.
The warning codes that you'd need to suppress are CS0612 for the plain Obsolete attribute and CS0618 if the attribute has a custom message.
[Obsolete("Please don't touch the backing field!")]
private int _backingField;
public int YourProperty
{
#pragma warning disable 612, 618
get { return _backingField; }
set { _backingField = value; }
#pragma warning restore 612, 618
}
There's no inbuilt way to do what you want to do, but by the sounds of things you need another layer of abstraction between your class and that value.
Create a separate class and put the item in there, then your outer class contains the new class, and you can only access it through its properties.
No, there isn't. I'd quite like this myself - something along the lines of:
public string Name
{
private string name; // Only accessible within the property
get { return name; /* Extra processing here */ }
set { name = value; /* Extra processing here */ }
}
I think I first suggested this about 5 years ago on the C# newsgroups... I don't expect to ever see it happen though.
There are various wrinkles to consider around serialization etc, but I still think it would be nice. I'd rather have automatically implemented readonly properties first though...
You CAN do this, by using a closure over a local in the constructor (or other initialisation function). But it requires significantly more work that the helper class approach.
class MyClass {
private Func<Foo> reallyPrivateFieldGetter;
private Action<Foo> reallyPrivateFieldSetter;
private Foo ReallyPrivateBackingFieldProperty {
get { return reallyPrivateFieldGetter(); }
set { reallyPrivateFieldSetter(value); }
}
public MyClass() {
Foo reallyPrivateField = 0;
reallyPrivateFieldGetter = () => { return reallyPrivateField; }
reallyPrivateFieldSetter = v => { reallyPrivateField = v; };
}
}
I suspect that the underlying field type Foo will need to be a reference class, so the two closures are created over the same object.
There is no such provisioning in C#.
However I would name private variables differently (e.g. m_something or just _something) so it is easier to spot it when it is used.
You can put all of your private fields into a nested class and expose them via public properties. Then within your class, you instantiate that nested class and use it. This way those private fields are not accessible as they would have been if they were part of your main class.
public class A
{
class FieldsForA
{
private int number;
public int Number
{
get
{
//TODO: Extra logic.
return number;
}
set
{
//TODO: Extra logic.
number = value;
}
}
}
FieldsForA fields = new FieldsForA();
public int Number
{
get{ return fields.Number;}
set{ fields.Number = value;}
}
}
It just provides a level of obstruction. The underlying problem of accessing private backing fields is still there within the nested class. However, the code within class A can't access those private fields of nested class FieldForA. It has to go through the public properties.
Perhaps a property backing store, similar to the way WPF stores properties?
So, you could have:
Dictionary<string,object> mPropertyBackingStore = new Dictionary<string,object> ();
public PropertyThing MyPropertyThing
{
get { return mPropertyBackingStore["MyPropertyThing"] as PropertyThing; }
set { mPropertyBackingStore["MyPropertyThing"] = value; }
}
You can do all the pre-processing you want now, safe in the knowledge that if anyone did access the variable directly, it would have been really really hard compared to the property accessor.
P.S. You may even be able to use the dependency property infrastructure from WPF...
P.P.S. This is obviously going to incur the cost of casting, but it depends on your needs - if performance is critical, perhaps this isn't the solution for you.
P.P.P.S Don't forget to initialise the backing store! (;
EDIT:
In fact, if you change the value property stored to a property storage object (using the Command pattern for example), you could do your processing in the command object...just a thought.
Can't do this in standard C#, however you could
define a custom attribute say OnlyAccessFromProperty
write your code like
[OnlyAccessFromProperty(Name)]
String name
Name
{
get{return name;}
}
etc …
Then write a custom rule for FxCop (or another checker)
Add FxCop to your build system so if your custom rule find an error the build is failed.
Do we need a set of standard custom rules/attributes to enforce common design patens like this without the need to extend C#
C# has no language feature for this. However, you can rely on naming conventions, similar to languages which have no private properties at all. Prefix your more private variable names with _p_, and you'll be pretty sure that you don't type it accidentally.
I don't know C# but in Java you may have a base class with only private instance variables and public setters and getters (should return a copy of the instance var.) and do all other in an inherited class.
A "general design principle" would be "use inheritance".
There is no build in solution in C#, but I think your problem can be solved by good OO design:
Each class should have a single purpose. So try to extract the logic around your field into a class as small as possible. This reduces the code where you can access the field by accident. If you do such errors by accident, your class is probably to big.
Often interface are good to restrict access to only a certain "subset" of an object. If that's appropriate for your case depends on your setting of course. More details about the work to be done would help to provide a better answer.
You say that you do additional processing. Presumably this would be detectable under the correct conditions. My solution, then, would be to create unit tests that implement conditions such that if the backing field is used directly the test will fail. Using these tests you should be able to ensure that your code correctly uses the property interface as long as the tests pass.
This has the benefit that you don't need to compromise your design. You get the safety of the unit tests to ensure that you don't accidently make breaking changes and you capture the understanding of how the class works so that others who come along later can read your tests as "documentation."
Wrap it in a class? The property thing is a bit like that anyway, associating data with methods - the "Encapsulation" they used to rave about...
class MyInt
{
private int n;
public static implicit operator MyInt(int v) // Set
{
MyInt tmp = new MyInt();
tmp.n = v;
return tmp;
}
public static implicit operator int(MyInt v) // Get
{
return v.n;
}
}
class MyClass
{
private MyInt myint;
public void func()
{
myint = 5;
myint.n = 2; // Can't do this.
myint = myint + 5 * 4; // Works just like an int.
}
}
I'm sure I'm missing something? It seems too normal...
BTW I do like the closures one, superbly mad.
My favorite solution to this (and what I follow) is to name private backing fields that are never intended to be used directly with a leading underscore, and private fields that are intended to be used without the underscore (but still lowercase).
I hate typing the underscore, so if I ever start to access a variable that starts with the underscore, I know somethings wrong - I'm not supposed to be directly accessing that variable. Obviously, this approach still doesn't ultimately stop you from accessing that field, but as you can see from the other answers, any approach that does is a work around and/or hardly practical.
Another benefit of using the underscore notation is that when you use the dropdown box to browse your class, it puts all of your private, never-to-be-used backing fields all in one place at the top of the list, instead of allowing them to be mixed in with their respective properties.
As a design practice, you could use a naming convention for "private properties" that's different from normal public members - for instance, using m_ItemName for private items instead of ItemName for public ones.
If you're using the C# 3.0 compiler you can define properties which have compiler-generated backing fields like this:
public int MyInt { get; set; }
That will mean there is only one way to access the property, sure it doesn't mean you can only access the field but it does mean that there's nothing but the property to access.
I agree with the general rule that the class should trust itself (and by inference anybody coding within the class).
It is a shame that the field is exposed via intellisense.
Sadly placing [EditorBrowsable(EditorBrowsableState.Never)] does not work within that class (or indeed the assembly(1))
In Visual C#, EditorBrowsableAttribute does not suppress members from a class in the same assembly.
If you really do wish to solve this aspect of it the the following class may be useful and makes the intent clear as well.
public sealed class TriggerField<T>
{
private T data;
///<summary>raised *after* the value changes, (old, new)</summary>
public event Action<T,T> OnSet;
public TriggerField() { }
///<summary>the initial value does NOT trigger the onSet</summary>
public TriggerField(T initial) { this.data=initial; }
public TriggerField(Action<T,T> onSet) { this.OnSet += onSet; }
///<summary>the initial value does NOT trigger the onSet</summary>
public TriggerField(Action<T,T> onSet, T initial) : this(onSet)
{
this.data=initial;
}
public T Value
{
get { return this.data;}
set
{
var old = this.data;
this.data = value;
if (this.OnSet != null)
this.OnSet(old, value);
}
}
}
Allowing you to (somewhat verbosely) use it like so:
public class Foo
{
private readonly TriggerField<string> flibble = new TriggerField<string>();
private int versionCount = 0;
public Foo()
{
flibble.OnSet += (old,current) => this.versionCount++;
}
public string Flibble
{
get { return this.flibble.Value; }
set { this.flibble.Value = value; }
}
}
alternatively you can go for a less verbose option but accessing Flibble is by the not idiomatic bar.Flibble.Value = "x"; which would be problematic in reflective scenarios
public class Bar
{
public readonly TriggerField<string> Flibble;
private int versionCount = 0;
public Bar()
{
Flibble = new TriggerField<string>((old,current) => this.versionCount++);
}
}
or solution if you look at the community content!
The new Lazy class in .net 4.0
provides support for several common
patterns of lazy initialization
In my experience this is the most common reason I wish to wrap a field in a private properly, so solves a common case nicely. (If you are not using .Net 4 yet you can just create your own “Lazy” class with the same API as the .Net 4 version.)
See this and this and this for details of using the Lazy class.
Use the "veryprivate" construct type
Example:
veryprivate void YourMethod()
{
// code here
}