decimal to string conversion in C# - c#

How can I convert a list of decimal values to strings such that:
No decimal point is shown if the value is an integer
Otherwise, the number is formatted to a minimum of two decimal places
For example:
var items = new List<decimal>
{
120.5,
110,
25.356
};
foreach (var item in items)
{
var itemString = item.ToString();
}
This should result in the following string values:
"120.50"
"110"
"25.356"


You can use the decimal.ToString override to specify a formatting.
decimal amount = 120.5m;
string str = amount.ToString("0.00");
This can also be used when using String.Format.
Console.WriteLine("{0:0.00}", amount);
In the case of your first and second rule, it cannot be done on one line.
decimal amount = 120.5m;
string str = amount.ToString("0.00").Replace(".00", String.Empty);


The following extension method should satisfy you requirements. The comments on the code was provided in OP and comments.
public static string ToFormattedString(this decimal d)
{
//The comma is not mandatory. but
var s = d.ToString();
var tokens = s.Split(new[]{"."}, StringSplitOptions.RemoveEmptyEntries);
//if there are no decimal points 12 then there should no be any zeros and periods (.)
if (tokens.Length == 1)
return s;
//I need to remove trailing zeros
var places = tokens[1].TrimEnd('0');
if (places.Length == 0)
return tokens[0];
//if there is only one decimal point ex- 0.5 then it should be displayed as 0.50
if (places.Length == 1)
return d.ToString("F2");
var format = string.Format("F{0}", places.Length);
return d.ToString(format);
}
Used like this
var x = new decimal[]{120.5m, 110, 25.356m};
foreach (var item in x)
Console.WriteLine("{0} => {1}", item.ToString(), item.ToFormattedString());
Output:
120.5 => 120.50
110 => 110
25.356 => 25.356


You can write a method to get you the number of decimal places in the number like this:
private static int GetDecimalPlaces(decimal number)
{
return number.ToString().IndexOf('.') == -1 ? 0 :
number.ToString().Substring(number.ToString().IndexOf('.') + 1).Length;
}
Then you can use Fx specifier where x is the number of decimal places like this:
value1.ToString("F" + GetDecimalPlaces(value1))
Try Me.
Localization
If you care about localization, then use the code below so it will work for any culture since some cultures use , as decimal:
private static int GetDecimalPlaces(decimal number)
{
char decimalSeparator =
Convert.ToChar(CultureInfo.CurrentCulture.NumberFormat.NumberDecimalSeparator);
var index = number.ToString().IndexOf(decimalSeparator);
return index == -1 ? 0 : number.ToString().Substring(index + 1).Length;
}
There are various formats as shown on MSDN. Here is some code copy pasted from there:
decimal value = 16325.62m;
string specifier;
// Use standard numeric format specifiers.
specifier = "G";
Console.WriteLine("{0}: {1}", specifier, value.ToString(specifier));
// Displays: G: 16325.62
specifier = "C";
Console.WriteLine("{0}: {1}", specifier, value.ToString(specifier));
// Displays: C: $16,325.62
specifier = "E04";
Console.WriteLine("{0}: {1}", specifier, value.ToString(specifier));
// Displays: E04: 1.6326E+004
specifier = "F";
Console.WriteLine("{0}: {1}", specifier, value.ToString(specifier));
// Displays: F: 16325.62
specifier = "N";
Console.WriteLine("{0}: {1}", specifier, value.ToString(specifier));
// Displays: N: 16,325.62
specifier = "P";
Console.WriteLine("{0}: {1}", specifier, (value/10000).ToString(specifier));
// Displays: P: 163.26 %
// Use custom numeric format specifiers.
specifier = "0,0.000";
Console.WriteLine("{0}: {1}", specifier, value.ToString(specifier));
// Displays: 0,0.000: 16,325.620
specifier = "#,#.00#;(#,#.00#)";
Console.WriteLine("{0}: {1}", specifier, (value*-1).ToString(specifier));
// Displays: #,#.00#;(#,#.00#): (16,325.62)

Related

How do sum decimal numbers in C#? [duplicate]

I want to parse a string like "3.5" to a double. However,
double.Parse("3.5")
yields 35 and
double.Parse("3.5", System.Globalization.NumberStyles.AllowDecimalPoint)
throws a FormatException.
Now my computer's locale is set to German, wherein a comma is used as decimal separator. It might have to do something with that and double.Parse() expecting "3,5" as input, but I'm not sure.
How can I parse a string containing a decimal number that may or may not be formatted as specified in my current locale?

double.Parse("3.5", CultureInfo.InvariantCulture)

I usualy use a multi-culture function to parse user input, mostly because if someone is used to the numpad and is using a culture that use a comma as the decimal separator, that person will use the point of the numpad instead of a comma.
public static double GetDouble(string value, double defaultValue)
{
double result;
//Try parsing in the current culture
if (!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.CurrentCulture, out result) &&
//Then try in US english
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.GetCultureInfo("en-US"), out result) &&
//Then in neutral language
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.InvariantCulture, out result))
{
result = defaultValue;
}
return result;
}
Beware though, #nikie comments are true. To my defense, I use this function in a controlled environment where I know that the culture can either be en-US, en-CA or fr-CA. I use this function because in French, we use the comma as a decimal separator, but anybody who ever worked in finance will always use the decimal separator on the numpad, but this is a point, not a comma. So even in the fr-CA culture, I need to parse number that will have a point as the decimal separator.

I couldn't write a comment, so I write here:
double.Parse("3.5", CultureInfo.InvariantCulture) is not a good idea, because in Canada we write 3,5 instead of 3.5 and this function gives us 35 as a result.
I tested both on my computer:
double.Parse("3.5", CultureInfo.InvariantCulture) --> 3.5 OK
double.Parse("3,5", CultureInfo.InvariantCulture) --> 35 not OK
This is a correct way that Pierre-Alain Vigeant mentioned
public static double GetDouble(string value, double defaultValue)
{
double result;
// Try parsing in the current culture
if (!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.CurrentCulture, out result) &&
// Then try in US english
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.GetCultureInfo("en-US"), out result) &&
// Then in neutral language
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.InvariantCulture, out result))
{
result = defaultValue;
}
return result;
}

Double.Parse("3,5".Replace(',', '.'), CultureInfo.InvariantCulture)
Replace the comma with a point before parsing. Useful in countries with a comma as decimal separator. Think about limiting user input (if necessary) to one comma or point.

Look, every answer above that proposes writing a string replacement by a constant string can only be wrong. Why? Because you don't respect the region settings of Windows! Windows assures the user to have the freedom to set whatever separator character s/he wants. S/He can open up the control panel, go into the region panel, click on advanced and change the character at any time. Even during your program run. Think of this. A good solution must be aware of this.
So, first you will have to ask yourself, where this number is coming from, that you want to parse. If it's coming from input in the .NET Framework no problem, because it will be in the same format. But maybe it was coming from outside, maybe from a external server, maybe from an old DB that only supports string properties. There, the db admin should have given a rule in which format the numbers are to be stored. If you know for example that it will be an US DB with US format you can use this piece of code:
CultureInfo usCulture = new CultureInfo("en-US");
NumberFormatInfo dbNumberFormat = usCulture.NumberFormat;
decimal number = decimal.Parse(db.numberString, dbNumberFormat);
This will work fine anywhere on the world. And please don't use 'Convert.ToXxxx'. The 'Convert' class is thought only as a base for conversions in any direction. Besides: You may use the similar mechanism for DateTimes too.

The trick is to use invariant culture, to parse dot in all cultures.
double.Parse("3.5", System.Globalization.NumberStyles.AllowDecimalPoint, System.Globalization.NumberFormatInfo.InvariantInfo);

string testString1 = "2,457";
string testString2 = "2.457";
double testNum = 0.5;
char decimalSepparator;
decimalSepparator = testNum.ToString()[1];
Console.WriteLine(double.Parse(testString1.Replace('.', decimalSepparator).Replace(',', decimalSepparator)));
Console.WriteLine(double.Parse(testString2.Replace('.', decimalSepparator).Replace(',', decimalSepparator)));

My two cents on this topic, trying to provide a generic, double conversion method:
private static double ParseDouble(object value)
{
double result;
string doubleAsString = value.ToString();
IEnumerable<char> doubleAsCharList = doubleAsString.ToList();
if (doubleAsCharList.Where(ch => ch == '.' || ch == ',').Count() <= 1)
{
double.TryParse(doubleAsString.Replace(',', '.'),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else
{
if (doubleAsCharList.Where(ch => ch == '.').Count() <= 1
&& doubleAsCharList.Where(ch => ch == ',').Count() > 1)
{
double.TryParse(doubleAsString.Replace(",", string.Empty),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else if (doubleAsCharList.Where(ch => ch == ',').Count() <= 1
&& doubleAsCharList.Where(ch => ch == '.').Count() > 1)
{
double.TryParse(doubleAsString.Replace(".", string.Empty).Replace(',', '.'),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else
{
throw new ParsingException($"Error parsing {doubleAsString} as double, try removing thousand separators (if any)");
}
}
return result;
}
Works as expected with:
1.1
1,1
1,000,000,000
1.000.000.000
1,000,000,000.99
1.000.000.000,99
5,000,111.3
5.000.111,3
0.99,000,111,88
0,99.000.111.88
No default conversion is implemented, so it would fail trying to parse 1.3,14, 1,3.14 or similar cases.

The following code does the job in any scenario. It's a little bit parsing.
List<string> inputs = new List<string>()
{
"1.234.567,89",
"1 234 567,89",
"1 234 567.89",
"1,234,567.89",
"123456789",
"1234567,89",
"1234567.89",
};
string output;
foreach (string input in inputs)
{
// Unify string (no spaces, only .)
output = input.Trim().Replace(" ", "").Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join("", split.Take(split.Count()-1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
// Parse double invariant
double d = double.Parse(output, CultureInfo.InvariantCulture);
Console.WriteLine(d);
}

I think 100% correct conversion isn't possible, if the value comes from a user input. e.g. if the value is 123.456, it can be a grouping or it can be a decimal point. If you really need 100% you have to describe your format and throw an exception if it is not correct.
But I improved the code of JanW, so we get a little bit more ahead to the 100%. The idea behind is, that if the last separator is a groupSeperator, this would be more an integer type, than a double.
The added code is in the first if of GetDouble.
void Main()
{
List<string> inputs = new List<string>() {
"1.234.567,89",
"1 234 567,89",
"1 234 567.89",
"1,234,567.89",
"1234567,89",
"1234567.89",
"123456789",
"123.456.789",
"123,456,789,"
};
foreach(string input in inputs) {
Console.WriteLine(GetDouble(input,0d));
}
}
public static double GetDouble(string value, double defaultValue) {
double result;
string output;
// Check if last seperator==groupSeperator
string groupSep = System.Globalization.CultureInfo.CurrentCulture.NumberFormat.NumberGroupSeparator;
if (value.LastIndexOf(groupSep) + 4 == value.Count())
{
bool tryParse = double.TryParse(value, System.Globalization.NumberStyles.Any, System.Globalization.CultureInfo.CurrentCulture, out result);
result = tryParse ? result : defaultValue;
}
else
{
// Unify string (no spaces, only . )
output = value.Trim().Replace(" ", string.Empty).Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join(string.Empty, split.Take(split.Count()-1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
// Parse double invariant
result = double.Parse(output, System.Globalization.CultureInfo.InvariantCulture);
}
return result;
}

var doublePattern = #"(?<integer>[0-9]+)(?:\,|\.)(?<fraction>[0-9]+)";
var sourceDoubleString = "03444,44426";
var match = Regex.Match(sourceDoubleString, doublePattern);
var doubleResult = match.Success ? double.Parse(match.Groups["integer"].Value) + (match.Groups["fraction"].Value == null ? 0 : double.Parse(match.Groups["fraction"].Value) / Math.Pow(10, match.Groups["fraction"].Value.Length)): 0;
Console.WriteLine("Double of string '{0}' is {1}", sourceDoubleString, doubleResult);

Instead of having to specify a locale in all parses, I prefer to set an application wide locale, although if string formats are not consistent across the app, this might not work.
CultureInfo.DefaultThreadCurrentCulture = new CultureInfo("pt-PT");
CultureInfo.DefaultThreadCurrentUICulture = new CultureInfo("pt-PT");
Defining this at the begining of your application will make all double parses expect a comma as the decimal delimiter. You can set an appropriate locale so that the decimal and thousands separator fits the strings you are parsing.

It's difficult without specifying what decimal separator to look for, but if you do, this is what I'm using:
public static double Parse(string str, char decimalSep)
{
string s = GetInvariantParseString(str, decimalSep);
return double.Parse(s, System.Globalization.CultureInfo.InvariantCulture);
}
public static bool TryParse(string str, char decimalSep, out double result)
{
// NumberStyles.Float | NumberStyles.AllowThousands got from Reflector
return double.TryParse(GetInvariantParseString(str, decimalSep), NumberStyles.Float | NumberStyles.AllowThousands, System.Globalization.CultureInfo.InvariantCulture, out result);
}
private static string GetInvariantParseString(string str, char decimalSep)
{
str = str.Replace(" ", "");
if (decimalSep != '.')
str = SwapChar(str, decimalSep, '.');
return str;
}
public static string SwapChar(string value, char from, char to)
{
if (value == null)
throw new ArgumentNullException("value");
StringBuilder builder = new StringBuilder();
foreach (var item in value)
{
char c = item;
if (c == from)
c = to;
else if (c == to)
c = from;
builder.Append(c);
}
return builder.ToString();
}
private static void ParseTestErr(string p, char p_2)
{
double res;
bool b = TryParse(p, p_2, out res);
if (b)
throw new Exception();
}
private static void ParseTest(double p, string p_2, char p_3)
{
double d = Parse(p_2, p_3);
if (d != p)
throw new Exception();
}
static void Main(string[] args)
{
ParseTest(100100100.100, "100.100.100,100", ',');
ParseTest(100100100.100, "100,100,100.100", '.');
ParseTest(100100100100, "100.100.100.100", ',');
ParseTest(100100100100, "100,100,100,100", '.');
ParseTestErr("100,100,100,100", ',');
ParseTestErr("100.100.100.100", '.');
ParseTest(100100100100, "100 100 100 100.0", '.');
ParseTest(100100100.100, "100 100 100.100", '.');
ParseTest(100100100.100, "100 100 100,100", ',');
ParseTest(100100100100, "100 100 100,100", '.');
ParseTest(1234567.89, "1.234.567,89", ',');
ParseTest(1234567.89, "1 234 567,89", ',');
ParseTest(1234567.89, "1 234 567.89", '.');
ParseTest(1234567.89, "1,234,567.89", '.');
ParseTest(1234567.89, "1234567,89", ',');
ParseTest(1234567.89, "1234567.89", '.');
ParseTest(123456789, "123456789", '.');
ParseTest(123456789, "123456789", ',');
ParseTest(123456789, "123.456.789", ',');
ParseTest(1234567890, "1.234.567.890", ',');
}
This should work with any culture. It correctly fails to parse strings that has more than one decimal separator, unlike implementations that replace instead of swap.

I improved the code of #JanW as well...
I need it to format results from medical instruments, and they also send ">1000", "23.3e02", "350E-02", and "NEGATIVE".
private string FormatResult(string vResult)
{
string output;
string input = vResult;
// Unify string (no spaces, only .)
output = input.Trim().Replace(" ", "").Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join("", split.Take(split.Count() - 1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
string sfirst = output.Substring(0, 1);
try
{
if (sfirst == "<" || sfirst == ">")
{
output = output.Replace(sfirst, "");
double res = Double.Parse(output);
return String.Format("{1}{0:0.####}", res, sfirst);
}
else
{
double res = Double.Parse(output);
return String.Format("{0:0.####}", res);
}
}
catch
{
return output;
}
}

Here is a solution that handles any number string that many include commas and periods. This solution is particular for money amounts so only the tenths and hundredths place are expected. Anything more is treated as a whole number.
First remove anything that is not a number, comma, period, or negative sign.
string stringAmount = Regex.Replace(originalString, #"[^0-9\.\-,]", "");
Then we split up the number into the whole number and decimal number.
string[] decimalParsed = Regex.Split(stringAmount, #"(?:\.|,)(?=\d{2}$)");
(This Regex expression selects a comma or period that is two numbers from the end of the string.)
Now we take the whole number and strip it of any commas and periods.
string wholeAmount = decimalParsed[0].Replace(",", "").Replace(".", "");
if (wholeAmount.IsNullOrEmpty())
wholeAmount = "0";
Now we handle the decimal part, if any.
string decimalAmount = "00";
if (decimalParsed.Length == 2)
{
decimalAmount = decimalParsed[1];
}
Finally we can put the whole and decimal together and parse the Double.
double amount = $"{wholeAmount}.{decimalAmount}".ToDouble();
This will handle 200,00, 1 000,00 , 1,000 , 1.000,33 , 2,000.000,78 etc.

I am developing a .Net Maui app that runs on Windows, Mac, Android, and iPhone. I have 3 double values that I parse and store using '.' (e.g. "32.5") in all cases: latitude, longitude, and altitude. I happen to have the Android and iPhone set for Spanish and noticed that the Android parsed the '.' string just fine. However, the iPhone refused to parse it correctly unless I substituted ',' for the '.'. Otherwise, the result was always a huge number.
Rather than deal with the complications of localization, I came up with a simple solution that takes advantage of the specific limits of my double numbers.
case "Lat":
waypoint.Lat = ParseDouble(xmlVal, 90);
break;
case "Lon":
waypoint.Lon = ParseDouble(xmlVal, 180);
break;
case "Alt":
waypoint.Alt = ParseDouble(xmlVal, 32000);
public static double ParseDouble(string val, double limit)
{
double result;
if (double.TryParse(val, out result))
{
if (Math.Abs(result) <= limit)
return result;
else if (double.TryParse(val.Replace('.', ','), out result))
{
if (Math.Abs(result) <= limit)
return result;
}
}
return 0;
}

System.Globalization.CultureInfo ci = System.Globalization.CultureInfo.CurrentCulture;
string _pos = dblstr.Replace(".",
ci.NumberFormat.NumberDecimalSeparator).Replace(",",
ci.NumberFormat.NumberDecimalSeparator);
double _dbl = double.Parse(_pos);

The below is less efficient, but I use this logic. This is valid only if you have two digits after decimal point.
double val;
if (temp.Text.Split('.').Length > 1)
{
val = double.Parse(temp.Text.Split('.')[0]);
if (temp.Text.Split('.')[1].Length == 1)
val += (0.1 * double.Parse(temp.Text.Split('.')[1]));
else
val += (0.01 * double.Parse(temp.Text.Split('.')[1]));
}
else
val = double.Parse(RR(temp.Text));

Multiply the number and then divide it by what you multiplied it by before.
For example,
perc = double.Parse("3.555)*1000;
result = perc/1000

c# Why do I get the double value without decimal (Conversion from object to double) [duplicate]

I want to parse a string like "3.5" to a double. However,
double.Parse("3.5")
yields 35 and
double.Parse("3.5", System.Globalization.NumberStyles.AllowDecimalPoint)
throws a FormatException.
Now my computer's locale is set to German, wherein a comma is used as decimal separator. It might have to do something with that and double.Parse() expecting "3,5" as input, but I'm not sure.
How can I parse a string containing a decimal number that may or may not be formatted as specified in my current locale?

double.Parse("3.5", CultureInfo.InvariantCulture)

I usualy use a multi-culture function to parse user input, mostly because if someone is used to the numpad and is using a culture that use a comma as the decimal separator, that person will use the point of the numpad instead of a comma.
public static double GetDouble(string value, double defaultValue)
{
double result;
//Try parsing in the current culture
if (!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.CurrentCulture, out result) &&
//Then try in US english
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.GetCultureInfo("en-US"), out result) &&
//Then in neutral language
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.InvariantCulture, out result))
{
result = defaultValue;
}
return result;
}
Beware though, #nikie comments are true. To my defense, I use this function in a controlled environment where I know that the culture can either be en-US, en-CA or fr-CA. I use this function because in French, we use the comma as a decimal separator, but anybody who ever worked in finance will always use the decimal separator on the numpad, but this is a point, not a comma. So even in the fr-CA culture, I need to parse number that will have a point as the decimal separator.

I couldn't write a comment, so I write here:
double.Parse("3.5", CultureInfo.InvariantCulture) is not a good idea, because in Canada we write 3,5 instead of 3.5 and this function gives us 35 as a result.
I tested both on my computer:
double.Parse("3.5", CultureInfo.InvariantCulture) --> 3.5 OK
double.Parse("3,5", CultureInfo.InvariantCulture) --> 35 not OK
This is a correct way that Pierre-Alain Vigeant mentioned
public static double GetDouble(string value, double defaultValue)
{
double result;
// Try parsing in the current culture
if (!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.CurrentCulture, out result) &&
// Then try in US english
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.GetCultureInfo("en-US"), out result) &&
// Then in neutral language
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.InvariantCulture, out result))
{
result = defaultValue;
}
return result;
}

Double.Parse("3,5".Replace(',', '.'), CultureInfo.InvariantCulture)
Replace the comma with a point before parsing. Useful in countries with a comma as decimal separator. Think about limiting user input (if necessary) to one comma or point.

Look, every answer above that proposes writing a string replacement by a constant string can only be wrong. Why? Because you don't respect the region settings of Windows! Windows assures the user to have the freedom to set whatever separator character s/he wants. S/He can open up the control panel, go into the region panel, click on advanced and change the character at any time. Even during your program run. Think of this. A good solution must be aware of this.
So, first you will have to ask yourself, where this number is coming from, that you want to parse. If it's coming from input in the .NET Framework no problem, because it will be in the same format. But maybe it was coming from outside, maybe from a external server, maybe from an old DB that only supports string properties. There, the db admin should have given a rule in which format the numbers are to be stored. If you know for example that it will be an US DB with US format you can use this piece of code:
CultureInfo usCulture = new CultureInfo("en-US");
NumberFormatInfo dbNumberFormat = usCulture.NumberFormat;
decimal number = decimal.Parse(db.numberString, dbNumberFormat);
This will work fine anywhere on the world. And please don't use 'Convert.ToXxxx'. The 'Convert' class is thought only as a base for conversions in any direction. Besides: You may use the similar mechanism for DateTimes too.

The trick is to use invariant culture, to parse dot in all cultures.
double.Parse("3.5", System.Globalization.NumberStyles.AllowDecimalPoint, System.Globalization.NumberFormatInfo.InvariantInfo);

string testString1 = "2,457";
string testString2 = "2.457";
double testNum = 0.5;
char decimalSepparator;
decimalSepparator = testNum.ToString()[1];
Console.WriteLine(double.Parse(testString1.Replace('.', decimalSepparator).Replace(',', decimalSepparator)));
Console.WriteLine(double.Parse(testString2.Replace('.', decimalSepparator).Replace(',', decimalSepparator)));

My two cents on this topic, trying to provide a generic, double conversion method:
private static double ParseDouble(object value)
{
double result;
string doubleAsString = value.ToString();
IEnumerable<char> doubleAsCharList = doubleAsString.ToList();
if (doubleAsCharList.Where(ch => ch == '.' || ch == ',').Count() <= 1)
{
double.TryParse(doubleAsString.Replace(',', '.'),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else
{
if (doubleAsCharList.Where(ch => ch == '.').Count() <= 1
&& doubleAsCharList.Where(ch => ch == ',').Count() > 1)
{
double.TryParse(doubleAsString.Replace(",", string.Empty),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else if (doubleAsCharList.Where(ch => ch == ',').Count() <= 1
&& doubleAsCharList.Where(ch => ch == '.').Count() > 1)
{
double.TryParse(doubleAsString.Replace(".", string.Empty).Replace(',', '.'),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else
{
throw new ParsingException($"Error parsing {doubleAsString} as double, try removing thousand separators (if any)");
}
}
return result;
}
Works as expected with:
1.1
1,1
1,000,000,000
1.000.000.000
1,000,000,000.99
1.000.000.000,99
5,000,111.3
5.000.111,3
0.99,000,111,88
0,99.000.111.88
No default conversion is implemented, so it would fail trying to parse 1.3,14, 1,3.14 or similar cases.

The following code does the job in any scenario. It's a little bit parsing.
List<string> inputs = new List<string>()
{
"1.234.567,89",
"1 234 567,89",
"1 234 567.89",
"1,234,567.89",
"123456789",
"1234567,89",
"1234567.89",
};
string output;
foreach (string input in inputs)
{
// Unify string (no spaces, only .)
output = input.Trim().Replace(" ", "").Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join("", split.Take(split.Count()-1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
// Parse double invariant
double d = double.Parse(output, CultureInfo.InvariantCulture);
Console.WriteLine(d);
}

I think 100% correct conversion isn't possible, if the value comes from a user input. e.g. if the value is 123.456, it can be a grouping or it can be a decimal point. If you really need 100% you have to describe your format and throw an exception if it is not correct.
But I improved the code of JanW, so we get a little bit more ahead to the 100%. The idea behind is, that if the last separator is a groupSeperator, this would be more an integer type, than a double.
The added code is in the first if of GetDouble.
void Main()
{
List<string> inputs = new List<string>() {
"1.234.567,89",
"1 234 567,89",
"1 234 567.89",
"1,234,567.89",
"1234567,89",
"1234567.89",
"123456789",
"123.456.789",
"123,456,789,"
};
foreach(string input in inputs) {
Console.WriteLine(GetDouble(input,0d));
}
}
public static double GetDouble(string value, double defaultValue) {
double result;
string output;
// Check if last seperator==groupSeperator
string groupSep = System.Globalization.CultureInfo.CurrentCulture.NumberFormat.NumberGroupSeparator;
if (value.LastIndexOf(groupSep) + 4 == value.Count())
{
bool tryParse = double.TryParse(value, System.Globalization.NumberStyles.Any, System.Globalization.CultureInfo.CurrentCulture, out result);
result = tryParse ? result : defaultValue;
}
else
{
// Unify string (no spaces, only . )
output = value.Trim().Replace(" ", string.Empty).Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join(string.Empty, split.Take(split.Count()-1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
// Parse double invariant
result = double.Parse(output, System.Globalization.CultureInfo.InvariantCulture);
}
return result;
}

var doublePattern = #"(?<integer>[0-9]+)(?:\,|\.)(?<fraction>[0-9]+)";
var sourceDoubleString = "03444,44426";
var match = Regex.Match(sourceDoubleString, doublePattern);
var doubleResult = match.Success ? double.Parse(match.Groups["integer"].Value) + (match.Groups["fraction"].Value == null ? 0 : double.Parse(match.Groups["fraction"].Value) / Math.Pow(10, match.Groups["fraction"].Value.Length)): 0;
Console.WriteLine("Double of string '{0}' is {1}", sourceDoubleString, doubleResult);

Instead of having to specify a locale in all parses, I prefer to set an application wide locale, although if string formats are not consistent across the app, this might not work.
CultureInfo.DefaultThreadCurrentCulture = new CultureInfo("pt-PT");
CultureInfo.DefaultThreadCurrentUICulture = new CultureInfo("pt-PT");
Defining this at the begining of your application will make all double parses expect a comma as the decimal delimiter. You can set an appropriate locale so that the decimal and thousands separator fits the strings you are parsing.

It's difficult without specifying what decimal separator to look for, but if you do, this is what I'm using:
public static double Parse(string str, char decimalSep)
{
string s = GetInvariantParseString(str, decimalSep);
return double.Parse(s, System.Globalization.CultureInfo.InvariantCulture);
}
public static bool TryParse(string str, char decimalSep, out double result)
{
// NumberStyles.Float | NumberStyles.AllowThousands got from Reflector
return double.TryParse(GetInvariantParseString(str, decimalSep), NumberStyles.Float | NumberStyles.AllowThousands, System.Globalization.CultureInfo.InvariantCulture, out result);
}
private static string GetInvariantParseString(string str, char decimalSep)
{
str = str.Replace(" ", "");
if (decimalSep != '.')
str = SwapChar(str, decimalSep, '.');
return str;
}
public static string SwapChar(string value, char from, char to)
{
if (value == null)
throw new ArgumentNullException("value");
StringBuilder builder = new StringBuilder();
foreach (var item in value)
{
char c = item;
if (c == from)
c = to;
else if (c == to)
c = from;
builder.Append(c);
}
return builder.ToString();
}
private static void ParseTestErr(string p, char p_2)
{
double res;
bool b = TryParse(p, p_2, out res);
if (b)
throw new Exception();
}
private static void ParseTest(double p, string p_2, char p_3)
{
double d = Parse(p_2, p_3);
if (d != p)
throw new Exception();
}
static void Main(string[] args)
{
ParseTest(100100100.100, "100.100.100,100", ',');
ParseTest(100100100.100, "100,100,100.100", '.');
ParseTest(100100100100, "100.100.100.100", ',');
ParseTest(100100100100, "100,100,100,100", '.');
ParseTestErr("100,100,100,100", ',');
ParseTestErr("100.100.100.100", '.');
ParseTest(100100100100, "100 100 100 100.0", '.');
ParseTest(100100100.100, "100 100 100.100", '.');
ParseTest(100100100.100, "100 100 100,100", ',');
ParseTest(100100100100, "100 100 100,100", '.');
ParseTest(1234567.89, "1.234.567,89", ',');
ParseTest(1234567.89, "1 234 567,89", ',');
ParseTest(1234567.89, "1 234 567.89", '.');
ParseTest(1234567.89, "1,234,567.89", '.');
ParseTest(1234567.89, "1234567,89", ',');
ParseTest(1234567.89, "1234567.89", '.');
ParseTest(123456789, "123456789", '.');
ParseTest(123456789, "123456789", ',');
ParseTest(123456789, "123.456.789", ',');
ParseTest(1234567890, "1.234.567.890", ',');
}
This should work with any culture. It correctly fails to parse strings that has more than one decimal separator, unlike implementations that replace instead of swap.

I improved the code of #JanW as well...
I need it to format results from medical instruments, and they also send ">1000", "23.3e02", "350E-02", and "NEGATIVE".
private string FormatResult(string vResult)
{
string output;
string input = vResult;
// Unify string (no spaces, only .)
output = input.Trim().Replace(" ", "").Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join("", split.Take(split.Count() - 1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
string sfirst = output.Substring(0, 1);
try
{
if (sfirst == "<" || sfirst == ">")
{
output = output.Replace(sfirst, "");
double res = Double.Parse(output);
return String.Format("{1}{0:0.####}", res, sfirst);
}
else
{
double res = Double.Parse(output);
return String.Format("{0:0.####}", res);
}
}
catch
{
return output;
}
}

Here is a solution that handles any number string that many include commas and periods. This solution is particular for money amounts so only the tenths and hundredths place are expected. Anything more is treated as a whole number.
First remove anything that is not a number, comma, period, or negative sign.
string stringAmount = Regex.Replace(originalString, #"[^0-9\.\-,]", "");
Then we split up the number into the whole number and decimal number.
string[] decimalParsed = Regex.Split(stringAmount, #"(?:\.|,)(?=\d{2}$)");
(This Regex expression selects a comma or period that is two numbers from the end of the string.)
Now we take the whole number and strip it of any commas and periods.
string wholeAmount = decimalParsed[0].Replace(",", "").Replace(".", "");
if (wholeAmount.IsNullOrEmpty())
wholeAmount = "0";
Now we handle the decimal part, if any.
string decimalAmount = "00";
if (decimalParsed.Length == 2)
{
decimalAmount = decimalParsed[1];
}
Finally we can put the whole and decimal together and parse the Double.
double amount = $"{wholeAmount}.{decimalAmount}".ToDouble();
This will handle 200,00, 1 000,00 , 1,000 , 1.000,33 , 2,000.000,78 etc.

I am developing a .Net Maui app that runs on Windows, Mac, Android, and iPhone. I have 3 double values that I parse and store using '.' (e.g. "32.5") in all cases: latitude, longitude, and altitude. I happen to have the Android and iPhone set for Spanish and noticed that the Android parsed the '.' string just fine. However, the iPhone refused to parse it correctly unless I substituted ',' for the '.'. Otherwise, the result was always a huge number.
Rather than deal with the complications of localization, I came up with a simple solution that takes advantage of the specific limits of my double numbers.
case "Lat":
waypoint.Lat = ParseDouble(xmlVal, 90);
break;
case "Lon":
waypoint.Lon = ParseDouble(xmlVal, 180);
break;
case "Alt":
waypoint.Alt = ParseDouble(xmlVal, 32000);
public static double ParseDouble(string val, double limit)
{
double result;
if (double.TryParse(val, out result))
{
if (Math.Abs(result) <= limit)
return result;
else if (double.TryParse(val.Replace('.', ','), out result))
{
if (Math.Abs(result) <= limit)
return result;
}
}
return 0;
}

System.Globalization.CultureInfo ci = System.Globalization.CultureInfo.CurrentCulture;
string _pos = dblstr.Replace(".",
ci.NumberFormat.NumberDecimalSeparator).Replace(",",
ci.NumberFormat.NumberDecimalSeparator);
double _dbl = double.Parse(_pos);

The below is less efficient, but I use this logic. This is valid only if you have two digits after decimal point.
double val;
if (temp.Text.Split('.').Length > 1)
{
val = double.Parse(temp.Text.Split('.')[0]);
if (temp.Text.Split('.')[1].Length == 1)
val += (0.1 * double.Parse(temp.Text.Split('.')[1]));
else
val += (0.01 * double.Parse(temp.Text.Split('.')[1]));
}
else
val = double.Parse(RR(temp.Text));

Multiply the number and then divide it by what you multiplied it by before.
For example,
perc = double.Parse("3.555)*1000;
result = perc/1000

Parse string to double [duplicate]

I want to parse a string like "3.5" to a double. However,
double.Parse("3.5")
yields 35 and
double.Parse("3.5", System.Globalization.NumberStyles.AllowDecimalPoint)
throws a FormatException.
Now my computer's locale is set to German, wherein a comma is used as decimal separator. It might have to do something with that and double.Parse() expecting "3,5" as input, but I'm not sure.
How can I parse a string containing a decimal number that may or may not be formatted as specified in my current locale?

double.Parse("3.5", CultureInfo.InvariantCulture)

I usualy use a multi-culture function to parse user input, mostly because if someone is used to the numpad and is using a culture that use a comma as the decimal separator, that person will use the point of the numpad instead of a comma.
public static double GetDouble(string value, double defaultValue)
{
double result;
//Try parsing in the current culture
if (!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.CurrentCulture, out result) &&
//Then try in US english
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.GetCultureInfo("en-US"), out result) &&
//Then in neutral language
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.InvariantCulture, out result))
{
result = defaultValue;
}
return result;
}
Beware though, #nikie comments are true. To my defense, I use this function in a controlled environment where I know that the culture can either be en-US, en-CA or fr-CA. I use this function because in French, we use the comma as a decimal separator, but anybody who ever worked in finance will always use the decimal separator on the numpad, but this is a point, not a comma. So even in the fr-CA culture, I need to parse number that will have a point as the decimal separator.

I couldn't write a comment, so I write here:
double.Parse("3.5", CultureInfo.InvariantCulture) is not a good idea, because in Canada we write 3,5 instead of 3.5 and this function gives us 35 as a result.
I tested both on my computer:
double.Parse("3.5", CultureInfo.InvariantCulture) --> 3.5 OK
double.Parse("3,5", CultureInfo.InvariantCulture) --> 35 not OK
This is a correct way that Pierre-Alain Vigeant mentioned
public static double GetDouble(string value, double defaultValue)
{
double result;
// Try parsing in the current culture
if (!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.CurrentCulture, out result) &&
// Then try in US english
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.GetCultureInfo("en-US"), out result) &&
// Then in neutral language
!double.TryParse(value, System.Globalization.NumberStyles.Any, CultureInfo.InvariantCulture, out result))
{
result = defaultValue;
}
return result;
}

Double.Parse("3,5".Replace(',', '.'), CultureInfo.InvariantCulture)
Replace the comma with a point before parsing. Useful in countries with a comma as decimal separator. Think about limiting user input (if necessary) to one comma or point.

Look, every answer above that proposes writing a string replacement by a constant string can only be wrong. Why? Because you don't respect the region settings of Windows! Windows assures the user to have the freedom to set whatever separator character s/he wants. S/He can open up the control panel, go into the region panel, click on advanced and change the character at any time. Even during your program run. Think of this. A good solution must be aware of this.
So, first you will have to ask yourself, where this number is coming from, that you want to parse. If it's coming from input in the .NET Framework no problem, because it will be in the same format. But maybe it was coming from outside, maybe from a external server, maybe from an old DB that only supports string properties. There, the db admin should have given a rule in which format the numbers are to be stored. If you know for example that it will be an US DB with US format you can use this piece of code:
CultureInfo usCulture = new CultureInfo("en-US");
NumberFormatInfo dbNumberFormat = usCulture.NumberFormat;
decimal number = decimal.Parse(db.numberString, dbNumberFormat);
This will work fine anywhere on the world. And please don't use 'Convert.ToXxxx'. The 'Convert' class is thought only as a base for conversions in any direction. Besides: You may use the similar mechanism for DateTimes too.

The trick is to use invariant culture, to parse dot in all cultures.
double.Parse("3.5", System.Globalization.NumberStyles.AllowDecimalPoint, System.Globalization.NumberFormatInfo.InvariantInfo);

string testString1 = "2,457";
string testString2 = "2.457";
double testNum = 0.5;
char decimalSepparator;
decimalSepparator = testNum.ToString()[1];
Console.WriteLine(double.Parse(testString1.Replace('.', decimalSepparator).Replace(',', decimalSepparator)));
Console.WriteLine(double.Parse(testString2.Replace('.', decimalSepparator).Replace(',', decimalSepparator)));

My two cents on this topic, trying to provide a generic, double conversion method:
private static double ParseDouble(object value)
{
double result;
string doubleAsString = value.ToString();
IEnumerable<char> doubleAsCharList = doubleAsString.ToList();
if (doubleAsCharList.Where(ch => ch == '.' || ch == ',').Count() <= 1)
{
double.TryParse(doubleAsString.Replace(',', '.'),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else
{
if (doubleAsCharList.Where(ch => ch == '.').Count() <= 1
&& doubleAsCharList.Where(ch => ch == ',').Count() > 1)
{
double.TryParse(doubleAsString.Replace(",", string.Empty),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else if (doubleAsCharList.Where(ch => ch == ',').Count() <= 1
&& doubleAsCharList.Where(ch => ch == '.').Count() > 1)
{
double.TryParse(doubleAsString.Replace(".", string.Empty).Replace(',', '.'),
System.Globalization.NumberStyles.Any,
CultureInfo.InvariantCulture,
out result);
}
else
{
throw new ParsingException($"Error parsing {doubleAsString} as double, try removing thousand separators (if any)");
}
}
return result;
}
Works as expected with:
1.1
1,1
1,000,000,000
1.000.000.000
1,000,000,000.99
1.000.000.000,99
5,000,111.3
5.000.111,3
0.99,000,111,88
0,99.000.111.88
No default conversion is implemented, so it would fail trying to parse 1.3,14, 1,3.14 or similar cases.

The following code does the job in any scenario. It's a little bit parsing.
List<string> inputs = new List<string>()
{
"1.234.567,89",
"1 234 567,89",
"1 234 567.89",
"1,234,567.89",
"123456789",
"1234567,89",
"1234567.89",
};
string output;
foreach (string input in inputs)
{
// Unify string (no spaces, only .)
output = input.Trim().Replace(" ", "").Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join("", split.Take(split.Count()-1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
// Parse double invariant
double d = double.Parse(output, CultureInfo.InvariantCulture);
Console.WriteLine(d);
}

I think 100% correct conversion isn't possible, if the value comes from a user input. e.g. if the value is 123.456, it can be a grouping or it can be a decimal point. If you really need 100% you have to describe your format and throw an exception if it is not correct.
But I improved the code of JanW, so we get a little bit more ahead to the 100%. The idea behind is, that if the last separator is a groupSeperator, this would be more an integer type, than a double.
The added code is in the first if of GetDouble.
void Main()
{
List<string> inputs = new List<string>() {
"1.234.567,89",
"1 234 567,89",
"1 234 567.89",
"1,234,567.89",
"1234567,89",
"1234567.89",
"123456789",
"123.456.789",
"123,456,789,"
};
foreach(string input in inputs) {
Console.WriteLine(GetDouble(input,0d));
}
}
public static double GetDouble(string value, double defaultValue) {
double result;
string output;
// Check if last seperator==groupSeperator
string groupSep = System.Globalization.CultureInfo.CurrentCulture.NumberFormat.NumberGroupSeparator;
if (value.LastIndexOf(groupSep) + 4 == value.Count())
{
bool tryParse = double.TryParse(value, System.Globalization.NumberStyles.Any, System.Globalization.CultureInfo.CurrentCulture, out result);
result = tryParse ? result : defaultValue;
}
else
{
// Unify string (no spaces, only . )
output = value.Trim().Replace(" ", string.Empty).Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join(string.Empty, split.Take(split.Count()-1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
// Parse double invariant
result = double.Parse(output, System.Globalization.CultureInfo.InvariantCulture);
}
return result;
}

var doublePattern = #"(?<integer>[0-9]+)(?:\,|\.)(?<fraction>[0-9]+)";
var sourceDoubleString = "03444,44426";
var match = Regex.Match(sourceDoubleString, doublePattern);
var doubleResult = match.Success ? double.Parse(match.Groups["integer"].Value) + (match.Groups["fraction"].Value == null ? 0 : double.Parse(match.Groups["fraction"].Value) / Math.Pow(10, match.Groups["fraction"].Value.Length)): 0;
Console.WriteLine("Double of string '{0}' is {1}", sourceDoubleString, doubleResult);

Instead of having to specify a locale in all parses, I prefer to set an application wide locale, although if string formats are not consistent across the app, this might not work.
CultureInfo.DefaultThreadCurrentCulture = new CultureInfo("pt-PT");
CultureInfo.DefaultThreadCurrentUICulture = new CultureInfo("pt-PT");
Defining this at the begining of your application will make all double parses expect a comma as the decimal delimiter. You can set an appropriate locale so that the decimal and thousands separator fits the strings you are parsing.

It's difficult without specifying what decimal separator to look for, but if you do, this is what I'm using:
public static double Parse(string str, char decimalSep)
{
string s = GetInvariantParseString(str, decimalSep);
return double.Parse(s, System.Globalization.CultureInfo.InvariantCulture);
}
public static bool TryParse(string str, char decimalSep, out double result)
{
// NumberStyles.Float | NumberStyles.AllowThousands got from Reflector
return double.TryParse(GetInvariantParseString(str, decimalSep), NumberStyles.Float | NumberStyles.AllowThousands, System.Globalization.CultureInfo.InvariantCulture, out result);
}
private static string GetInvariantParseString(string str, char decimalSep)
{
str = str.Replace(" ", "");
if (decimalSep != '.')
str = SwapChar(str, decimalSep, '.');
return str;
}
public static string SwapChar(string value, char from, char to)
{
if (value == null)
throw new ArgumentNullException("value");
StringBuilder builder = new StringBuilder();
foreach (var item in value)
{
char c = item;
if (c == from)
c = to;
else if (c == to)
c = from;
builder.Append(c);
}
return builder.ToString();
}
private static void ParseTestErr(string p, char p_2)
{
double res;
bool b = TryParse(p, p_2, out res);
if (b)
throw new Exception();
}
private static void ParseTest(double p, string p_2, char p_3)
{
double d = Parse(p_2, p_3);
if (d != p)
throw new Exception();
}
static void Main(string[] args)
{
ParseTest(100100100.100, "100.100.100,100", ',');
ParseTest(100100100.100, "100,100,100.100", '.');
ParseTest(100100100100, "100.100.100.100", ',');
ParseTest(100100100100, "100,100,100,100", '.');
ParseTestErr("100,100,100,100", ',');
ParseTestErr("100.100.100.100", '.');
ParseTest(100100100100, "100 100 100 100.0", '.');
ParseTest(100100100.100, "100 100 100.100", '.');
ParseTest(100100100.100, "100 100 100,100", ',');
ParseTest(100100100100, "100 100 100,100", '.');
ParseTest(1234567.89, "1.234.567,89", ',');
ParseTest(1234567.89, "1 234 567,89", ',');
ParseTest(1234567.89, "1 234 567.89", '.');
ParseTest(1234567.89, "1,234,567.89", '.');
ParseTest(1234567.89, "1234567,89", ',');
ParseTest(1234567.89, "1234567.89", '.');
ParseTest(123456789, "123456789", '.');
ParseTest(123456789, "123456789", ',');
ParseTest(123456789, "123.456.789", ',');
ParseTest(1234567890, "1.234.567.890", ',');
}
This should work with any culture. It correctly fails to parse strings that has more than one decimal separator, unlike implementations that replace instead of swap.

I improved the code of #JanW as well...
I need it to format results from medical instruments, and they also send ">1000", "23.3e02", "350E-02", and "NEGATIVE".
private string FormatResult(string vResult)
{
string output;
string input = vResult;
// Unify string (no spaces, only .)
output = input.Trim().Replace(" ", "").Replace(",", ".");
// Split it on points
string[] split = output.Split('.');
if (split.Count() > 1)
{
// Take all parts except last
output = string.Join("", split.Take(split.Count() - 1).ToArray());
// Combine token parts with last part
output = string.Format("{0}.{1}", output, split.Last());
}
string sfirst = output.Substring(0, 1);
try
{
if (sfirst == "<" || sfirst == ">")
{
output = output.Replace(sfirst, "");
double res = Double.Parse(output);
return String.Format("{1}{0:0.####}", res, sfirst);
}
else
{
double res = Double.Parse(output);
return String.Format("{0:0.####}", res);
}
}
catch
{
return output;
}
}

Here is a solution that handles any number string that many include commas and periods. This solution is particular for money amounts so only the tenths and hundredths place are expected. Anything more is treated as a whole number.
First remove anything that is not a number, comma, period, or negative sign.
string stringAmount = Regex.Replace(originalString, #"[^0-9\.\-,]", "");
Then we split up the number into the whole number and decimal number.
string[] decimalParsed = Regex.Split(stringAmount, #"(?:\.|,)(?=\d{2}$)");
(This Regex expression selects a comma or period that is two numbers from the end of the string.)
Now we take the whole number and strip it of any commas and periods.
string wholeAmount = decimalParsed[0].Replace(",", "").Replace(".", "");
if (wholeAmount.IsNullOrEmpty())
wholeAmount = "0";
Now we handle the decimal part, if any.
string decimalAmount = "00";
if (decimalParsed.Length == 2)
{
decimalAmount = decimalParsed[1];
}
Finally we can put the whole and decimal together and parse the Double.
double amount = $"{wholeAmount}.{decimalAmount}".ToDouble();
This will handle 200,00, 1 000,00 , 1,000 , 1.000,33 , 2,000.000,78 etc.

I am developing a .Net Maui app that runs on Windows, Mac, Android, and iPhone. I have 3 double values that I parse and store using '.' (e.g. "32.5") in all cases: latitude, longitude, and altitude. I happen to have the Android and iPhone set for Spanish and noticed that the Android parsed the '.' string just fine. However, the iPhone refused to parse it correctly unless I substituted ',' for the '.'. Otherwise, the result was always a huge number.
Rather than deal with the complications of localization, I came up with a simple solution that takes advantage of the specific limits of my double numbers.
case "Lat":
waypoint.Lat = ParseDouble(xmlVal, 90);
break;
case "Lon":
waypoint.Lon = ParseDouble(xmlVal, 180);
break;
case "Alt":
waypoint.Alt = ParseDouble(xmlVal, 32000);
public static double ParseDouble(string val, double limit)
{
double result;
if (double.TryParse(val, out result))
{
if (Math.Abs(result) <= limit)
return result;
else if (double.TryParse(val.Replace('.', ','), out result))
{
if (Math.Abs(result) <= limit)
return result;
}
}
return 0;
}

System.Globalization.CultureInfo ci = System.Globalization.CultureInfo.CurrentCulture;
string _pos = dblstr.Replace(".",
ci.NumberFormat.NumberDecimalSeparator).Replace(",",
ci.NumberFormat.NumberDecimalSeparator);
double _dbl = double.Parse(_pos);

The below is less efficient, but I use this logic. This is valid only if you have two digits after decimal point.
double val;
if (temp.Text.Split('.').Length > 1)
{
val = double.Parse(temp.Text.Split('.')[0]);
if (temp.Text.Split('.')[1].Length == 1)
val += (0.1 * double.Parse(temp.Text.Split('.')[1]));
else
val += (0.01 * double.Parse(temp.Text.Split('.')[1]));
}
else
val = double.Parse(RR(temp.Text));

Multiply the number and then divide it by what you multiplied it by before.
For example,
perc = double.Parse("3.555)*1000;
result = perc/1000

How to format string to money

I have a string like 000000000100, which I would like to convert to 1.00 and vice versa.
Leading zero will be remove, last two digit is the decimal.
I give more example :
000000001000 <=> 10.00
000000001005 <=> 10.05
000000331150 <=> 3311.50
Below is the code I am trying, it is giving me result without decimal :
amtf = string.Format("{0:0.00}", amt.TrimStart(new char[] {'0'}));

Convert the string to a decimal then divide it by 100 and apply the currency format string:
string.Format("{0:#.00}", Convert.ToDecimal(myMoneyString) / 100);
Edited to remove currency symbol as requested and convert to decimal instead.

you will need to convert it to decimal first, then format it in money format.
EX:
decimal decimalMoneyValue = 1921.39m;
string formattedMoneyValue = String.Format("{0:C}", decimalMoneyValue);
a working example: https://dotnetfiddle.net/soxxuW

decimal value = 0.00M;
value = Convert.ToDecimal(12345.12345);
Console.WriteLine(value.ToString("C"));
//OutPut : $12345.12
Console.WriteLine(value.ToString("C1"));
//OutPut : $12345.1
Console.WriteLine(value.ToString("C2"));
//OutPut : $12345.12
Console.WriteLine(value.ToString("C3"));
//OutPut : $12345.123
Console.WriteLine(value.ToString("C4"));
//OutPut : $12345.1234
Console.WriteLine(value.ToString("C5"));
//OutPut : $12345.12345
Console.WriteLine(value.ToString("C6"));
//OutPut : $12345.123450
Console output:

It works!
decimal moneyvalue = 1921.39m;
string html = String.Format("Order Total: {0:C}", moneyvalue);
Console.WriteLine(html);
Output
Order Total: $1,921.39

Once you have your string in a double/decimal to get it into the correct formatting for a specific locale use
double amount = 1234.95;
amount.ToString("C") // whatever the executing computer thinks is the right fomat
amount.ToString("C", System.Globalization.CultureInfo.GetCultureInfo("en-ie")) // €1,234.95
amount.ToString("C", System.Globalization.CultureInfo.GetCultureInfo("es-es")) // 1.234,95 €
amount.ToString("C", System.Globalization.CultureInfo.GetCultureInfo("en-GB")) // £1,234.95
amount.ToString("C", System.Globalization.CultureInfo.GetCultureInfo("en-au")) // $1,234.95
amount.ToString("C", System.Globalization.CultureInfo.GetCultureInfo("en-us")) // $1,234.95
amount.ToString("C", System.Globalization.CultureInfo.GetCultureInfo("en-ca")) // $1,234.95

Try simple like this
var amtf = $"{Convert.ToDecimal(amt):#0.00}";

string s ="000000000100";
decimal iv = 0;
decimal.TryParse(s, out iv);
Console.WriteLine((iv / 100).ToString("0.00"));

//Extra currency symbol and currency formatting: "€3,311.50":
String result = (Decimal.Parse("000000331150") / 100).ToString("C");
//No currency symbol and no currency formatting: "3311.50"
String result = (Decimal.Parse("000000331150") / 100).ToString("f2");

you can also do :
string.Format("{0:C}", amt)

Try something like this:
decimal moneyvalue = 1921.39m;
string html = String.Format("Order Total: {0:C}", moneyvalue);
Console.WriteLine(html);

In my case, I used this string format to display currency from decimal values without the symbol.
String format:
string.Format("{0:#,##0.00}", decimalValue)
Example:
var decimalNumbers = new decimal[] { 1M, 10M, 100M, 1000M,10000M,100000M,1000000M,1000000000M };
foreach (var decimalNumber in decimalNumbers)
{
Console.WriteLine(string.Format("{0:#,##0.00}", decimalNumber));
}

Parse to your string to a decimal first.

var tests = new[] {"000000001000", "000000001005", "000000331150"};
foreach (var test in tests)
{
Console.WriteLine("{0} <=> {1:f2}", test, Convert.ToDecimal(test) / 100);
}
Since you didn't ask for the currency symbol, I've used "f2" instead of "C"

try
amtf = amtf.Insert(amtf.Length - 2, ".");

private string cxp(string txt) {
try
{
decimal n;
n = Math.Round( Convert.ToDecimal( txt),2);
string newTxt;
newTxt = Convert.ToString(n);
//txt = txt.Replace(",", ".");
//string newtxt = string.Format("{0:#.00}", Convert.ToDecimal(txt) );
return newTxt.Replace(",", ".");
}
catch (Exception e)
{
MessageBox.Show(e.Message ,"Error al parsear número");
//throw;
return txt;
}
}

Parse string to decimal, commas and periods

How to parse string to decimal so it would work for both formats - w/ commas and periods?
[Fact]
public void foo(){
var a="1,1";
var b="1.1";
Assert.Equal(Parse(a),Parse(b));
}
private decimal Parse(string s){
return decimal.Parse(s,NumberStyles.Any,
CultureInfo.InvariantCulture);
}
output:
Test 'Unit.Sandbox.foo' failed: Assert.Equal() Failure
Expected: 11
Actual: 1,1

You could try that:
private decimal Parse(string s){
s = s.Replace(",", CultureInfo.InvariantCulture.NumberFormat.NumberDecimalSeparator);
return decimal.Parse(s,NumberStyles.Any,
CultureInfo.InvariantCulture);
}

How about this?
private static decimal Parse(string s)
{
s = s.Replace(",", ".");
return decimal.Parse(s);
}

You should get the desired result by modifying the Currency decimal separator to a comma before a parse on a comma decimal string. There are some food resources here:
http://msdn.microsoft.com/en-us/library/system.globalization.numberformatinfo.currencydecimalseparator.aspx#Y888
You could alternatively implement your own Iformatprovider as discussed here:
http://msdn.microsoft.com/en-us/library/t7xswkc6.aspx
http://msdn.microsoft.com/en-us/library/system.globalization.numberformatinfo.aspx
Oh, or you could do a dirty hack and simply run a string replace on "," with "." ;)

If you have an English-language operating system, this method converts a decimal number with a comma to a dot. If you have Russian, the method converts a decimal number with a dot to a comma.
Console.Write("Input number: ");
string? input = Console.ReadLine();
decimal number = ConvertNumberToCurrentLocale(input);
Console.WriteLine("Result: " + number);
decimal ConvertNumberToCurrentLocale(string? input)
{
string separator = Thread.CurrentThread.CurrentCulture.NumberFormat.NumberDecimalSeparator;
switch (separator)
{
case ".":
input = input?.Replace(",", ".");
break;
case ",":
input = input?.Replace(".", ",");
break;
}
decimal.TryParse(input, out var number);
return number;
}

Categories

Resources