What are the reason for the application pool to be stopped? I am asking about stopping the application, not recycling.
Does reaching private byte memory limit is one of them? When I debugged my website, it seems that the application pool is keep getting recycled at every minute, then suddenly the application pool is stopped and giving me
Error 503 unavailable.
I found out that actually my hosting provider degraded my private byte memory limit from 500MB into 100MB and without telling me. My application has minimum requirements of 150MB-200MB private bytes limit.
I am here asking this to make sure that the problem was because the memory limit, not the other thing.
It could be that the user identity is outdated, especially if you've tried starting a stopped app pool and the next request again fails.
In IIS, go to the Application Pools under the Server, then find the correct Application Pool for your web site, and click on it. On the Advanced Settings menu to the right, select Identity and change it and enter new user and password. Click on your Application Pool again, and select Recycle to restart it.
You can also try looking at the error message in Event Viewer, under Windows Logs, Application, Details tab.
Taken from HTTP Error 503, the service is unavailable.
I was having this same issue and I couldn't find anything in the event log location that MD GHOUSE mentioned. I ended up finding a warning in Event Viewer --> Windows Logs --> System that stated that the identity in my application pool did not have batch logon rights. I am adding that user to the AD group to resolve. I hope this helps someone.
try going into the IIS and selecting the application pool that is stopping. Click on advanced settings and go down to identity. Change the item from Application pool to Local Service. Restart the application pool or IIS and problem should be solved.
In my case, its due to domain password reset. When I created the application pool, I've used my old password. But after I reset my password, then application pool was getting stopped until I go and use my new password in the application pool advanced settings.
Related
We have a simple .net application running crystal reports in an Azure VM. We have some code that detects if the application has restarted, and this application is restarting often.
protected void Application_Start()
{
if (!HttpContext.Current.IsDebuggingEnabled)
SendgridService.SendAppRestartEmail();
}
I suspect the application is going to sleep or something is triggering the restart, but cant work out what.
After doing a lot of searching I am posting here to see if anyone can help
Most likely the problem is that your AppPool is getting recycled because of the low usage.
You'll need to adjust timeout settings. See the following articles:
Recycling Settings for an Application Pool
IIS: Idle Timeout vs Recycle
How To Configure Idle Time-out Settings For An Application Pool (IIS 7)
I installed Kentico 8.2 on my computer. But every time I turn off my computer and open it again. The Kentico Application never starts. I hope you can help me about my problem.
Your problem is not a Kentico issue at all, it's an IIS configuration issue. By default, IIS is configured to only run a website when it is first accessed manually or continually being used. If the website is idle and not running and you access it, the application pool kicks up and serves up the website. If there is idle time of 20 minutes (by default) it will go into a sleep state until it is requested again. When you restart your computer, IIS is in that sleep state until the website is first requested.
Within IIS you can set a few properties to help you out. In the Application Pool connected to your website go to the advanced properties of it. Check the General>Start Mode and ensure it is set to Always Running vs. On Demand.
Secondly, in the same Application Pool set the Process Model>Idle time-out (minutes) to something greater than the default 20 minutes. This will help only after the website is already running.
Thirdly, in the same Application Pool set the Process Model>Idle time-out action to Suspend. This will help the website start up faster when it does go to sleep.
Is autostart enabled in your IIS?
All above answers are valid, but if I remember correctly, there was also an issue with Skype taking up a specific port, if you set to "Run Skype on startup". This prevents some of the IIS services/websites to start. Not sure if that relates to your specific issue, but if you've got Skype installed and set to run on startup, try disabling this and restart your PC to see if it helped.
IIS 7.5 introduces the notion of auto-start providers, that allow you to get WAS to auto-load an application or assemblies when an application pool starts up.
Can a similar thing be achieved with IIS7?
Basically, we have an application that runs under WAS, and has an in-memory cache of data. When an application pool recycle occurs, my WAS deployed app won't actually be activated until the first hit for it is received. This means that the cache is cold when the first hit is received. It would be good to be able to pre-start the application as soon as the app pool is recycled.
Other options we've considered are:
Deploying the application as a Windows service so it doesn't re-cycle (this would work, but the application lifecycle management of IIS/WAS is a useful thing apart from this issue)
Writing a separate service whose job is to ping our application to warm it up.
However, the nicest way would be to get IIS7/WAS to do this for us.
In Windows 2008 you can log events that occur on the application pool, so you can log recycle events.
You can configure the event viewer to start a program when a specified message has been logged. You could call your service or load the assemblies in that program.
Would this be a feasible solution for you?
Regards,
Michel
in the advanced settings of your application pool set your application pool to generate Recycle event log entry every time it is recycled; I think the option is "Specific Time". Then you can use Windows Task Scheduler, create a script or something you want it to run that will hit your site so it can initialize. Set the trigger for the task to an even, set the Event Filter that you want to trigger the task and voila.
Question: When a webapplication gets started, it executes Application_Start in global.asax.
Now, a web application gets started as soon as the first request for a page in that application reaches the server.
But my question is: how long will the application run until the application is stopped.
I mean when after the first page request, there's no traffic on the server.
I need to know because I intend to start a server that listens on a tcp port in global.asax.
And when the application stops, the server ceases to listen to its port.
It depends on your IIS settings. Your application will run in an application pool, which takes a bunch of settings defining the behaviour of this pool.
The thing you're looking for are recycling settings. In IIS 7, you can access these easily from the management console. Go to Application Pools, right click on the application pool your app runs in (if you don't know which one that is, then it's probably the DefaultAppPool) and select recycling.
Here you'll find the options you have to control the recycling behaviour of your app pool, which in turn controls when your app 'resets'.
in a word (well 2) - shared hosting.
on shared hosting beware, (godaddy/webhost4life etc) this timeout could well be less, plus you don't have option to configure that on these hosting environments. i've had cases where the app pool is recycled after 5 mins at certain peek times, so you might have to investigate 'wakeup' routines to poke your app to keep in in the memory. i do this for a few shared hosting apps to great effect using pingalive.com.
hope this helps, even if in an abstract way.
jim
I am writing a web monitor app that gives information about all app pools / apps on my IIS server. I am looking for a way in C# to programmatically check if an IIS application is running without causing it to run if it is not.
Here is what I have found...
application is running, there are one or more sessions active.
all sessions dropped off...application still "running", app pool worker process is running.
At some point determined by IIS, the Application_End is finally executed...however, the app pool worker process is still running.
After 20 minutes, the app pool worker process finally shuts down due to inactivity.
It is between #3 and #4 that I am having trouble. The application has ended, but if I try to send an Http Request to the app, it will automatically start up. I am looking for a way to programmatically determine if the application has ended (while the worker process is still active awaiting shutdown) without restarting the Application.
I can try to provide more details if you are unsure what I am talking about.
Regards,
Jeremy
I found this on MSDN
public bool CheckIISRunning()
{
ServiceController controller = new ServiceController("W3SVC");
return controller.Status == ServiceControllerStatus.Running;
}
For this to work you need to have
System.ServiceProcess added as a reference.
Microsoft has created a VBScript file to identify the IIS Application Pools (by Process Id). If you search "iisapp.vbs" on google it should point you in the right direction.
Note: I'm not 100% sure that it will work with Windows Server 2008, but does work with 2003.
In IIS7 you can use appcmd apppool /? to see what possibilities are available.