Develop Reference

How to switch tabs with button in a TabControl?

I've watched a few tutorials online on how to change tabs using buttons but for some reason all the code I've tried doesn't work. I am currently running Microsoft Visual Studio 2017 and am trying to write some code for a button to change tabs.
I couldn't find any differences between my code and code shown in tutorials, so it may just be a Visual Studio setting that I haven't set up correctly to allow the button correctly, but I couldn't figure out if or where it may be.
Here's my current code:
//Element event handlers
public Form1()
{
InitializeComponent();
}
private void buttonStart_Click(object sender, EventArgs e)
{
tabControl.SelectedTab = DestSelect;
}
private void buttonGotoIntro_Click(object sender, EventArgs e)
{
tabControl.SelectedTab = Intro;
}
//An old computer-generated segment code for the previous button.
//When I try to remove it the computer gets mad at me.
private void GotoIntro_Click(object sender, EventArgs e)
{
}

Please confirm you have subscribed to the Click event for the buttons.
public Form1()
{
InitializeComponent();
buttonStart.Click += buttonStart_Click;
buttonGotoIntro.Click += buttonGotoIntro_Click;
}

Instead of 'tabControl.SelectedTab = DestSelect;" try instead the method 'tabControl.SelectTab(DestSelect);'
I read through this article to find your (hopefully) answer:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2cf22896-c5bd-4a9b-ab61-34404b55ef01/how-to-jump-to-a-specific-tab-in-the-tabcontrol?forum=vbgeneral

I assume u want to select a tab when a different Button is clicked.
tabControl.SelectedIndex = [Index of tab to switch to];
Code should look like;
tabControl.SelectedIndex = feeTabIndex;
If this is not clear enough, tell me exactly what you want to do.

Click on one link in geckoWebBrowser in C#

I want to click on one link in one page.
Here is my code:
private void Button1_Click(object sender, EventArgs e)//GO
{
if (!Xpcom.IsInitialized) Xpcom.Initialize("Firefox");
geckoWebBrowser1.Navigate("http://www.tsetmc.com/loader.aspx?ParTree=151311&i=67126881188552864");
}
And I want to click on a link:
حقیقی-حقوقی
can anybody help me?
thanks.

I just looked up a Gecko project where I was clicking on the link and while the following might not be the most elegant way the same technique should work for you:
private void geckoWebBrowser1_DocumentCompleted(object sender, EventArgs e)
{
var elements = geckoWebBrowser1.Document.GetElementsByTagName("a");
foreach (GeckoHtmlElement element in elements)
{
if (element.ClassName == "violet")
{
element.ScrollIntoView(false);
element.Click();
}
}
}
I don't think the ScrollIntoView call is actually required, I just did that because it was an animated button and I wanted to see it was working. But you will need to wait until the document has loaded before clicking so I've put it in the DocumentCompleted event so before the Navigate don't forget to add:
geckoWebBrowser1.DocumentCompleted += geckoWebBrowser1_DocumentCompleted;

C# Windows form new page

I'm trying to make a button on my windows form create a new page when clicked, something like when you are going through an installation of a program and you would click "Next" and it would take you to a new page but not bring up an entirely seperate window. I would also have another button that would be pressed to bring up the original form.
I've looked everywhere for a answer to this so any help on how I would create this would be greatly appreciated.
private void Cleaning_Click(object sender, EventArgs e)
{
// executes new page
}

What you want to do is to create a wizard. There are lot of samples on internet regarding that. Take a look;
http://www.codeproject.com/Articles/31770/Wizard-Form-Implementation
Or
You can see that SO question
Creating Wizards for Windows Forms in C#

One simple way is to use panels in a single form. The only problem with panels is that it is hard to edit the layout and also your code would become very messy.
it IS simple BUT has a very bad downside

Simply we can add one groupbox and add your controls, in form load set groupbox visible to false and button click event visible to true something like....
private void Form3_Load(object sender, EventArgs e)
{
groupBox1.Visible = false;
}
private void button1_Click_1(object sender, EventArgs e)
{
if (button1.Text == "&Show")
{
button1.Text = "&Hide";
groupBox1.Visible = true;
}
else if (button1.Text == "&Hide")
{
button1.Text = "&Show";
groupBox1.Visible = false;
}
}

C# reach click button in webbrowser?

I want to click event button in webbrowser object.
Button is clicked I want to reach out and write the code? For example, the login button is clicked on the webbrowser object in the pop-up on the site to capture the event and would like to write the code?

I write an example for you(how get event clicked button):
private void Form1_Load(object sender, EventArgs e)
{
//Or navigate to your url
webBrowser1.DocumentText = "<html><body><button id=\"btn1\" type=\"button\">Click Me!</button><button id=\"btn2\" type=\"button\">Click Me!</button></body></html>";
}
Call Click event:(when page loaded)
private void webBrowser1_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e)
{
webBrowser1.Document.Click += new HtmlElementEventHandler(Document_Click);
}
Get Active Element When User click on document
void Document_Click(object sender, HtmlElementEventArgs e)
{
//Check Element is Button
if (webBrowser1.Document.ActiveElement.TagName == "BUTTON")
{
if (webBrowser1.Document.ActiveElement.Id== "your button id")
{
//Do someting
}
}
}

If I understand correctly, you're using the WebBrowser control in C# WinForms and you would like to fire an event when a button is clicked.
The control doesn't have a click event, but the Document does. To do this you can use WebBrowser.Document.Click event and then loop through the HTML elements to find the one that was clicked.
web.Document.Click += new HtmlElementEventHandler(Document_Click);
This link will help also: webbrowser-control-get-element-by-type

Designing a dynamic panel

I am new to C# and I want to design a GUI for a image processing application in c#. I have a very basic rudimentary layout designed as shown below
Here, the image plane is fixed and it will show a live stream video. I have designed all the buttons frame and the side panel. But I do not know how to dynamically change the side panel for each button I click. For example, If I click button1_1, I want some things in the side panel and for button1_2, some other things in it. How do I go about doing it.
EDIT:
Thanks for the answers. I see tab controls is an option. But I want a new panel evertime a click a button. which can further open forms. Is it possible?

OK, let's see. It's easy to do with "TabControl" or array of "Panel"s.
1.Do it with TabControl.
You can design GUI in TabControl in multiple subTabs(if you don't know how please ask.). Then you change it in button click event, to make subTab you wanna show(which means make it visiable and not visiable for other subTabs.)
2.Do it with array of panel.
You can use panel[] panels. In button click event, you hide other panels and show the one you want.
Hope answer helps you!
private void button1_Click(object sender, EventArgs e)
{
tabControl1.SelectedIndex = 0;
tabControl1.TabPages[0].Text = "First";
}
private void button2_Click(object sender, EventArgs e)
{
tabControl1.SelectedIndex = 1;
}
private void button3_Click(object sender, EventArgs e)
{
tabControl1.SelectedIndex = 2;
}

you may want to add split container in your form.
Create UserControl for each buttons.
Code for the button click event
//Button1Click Event
private void button1_Click(object sender, EventArgs e)
{
UserControl1 m_UserControl = new UserControl1();
splitContainer1.Panel2.Controls.Clear();
splitContainer1.Panel2.Controls.Add(m_UserControl);
}
//Button2Click Event
private void button2_Click(object sender, EventArgs e)
{
UserControl2 m_Usercontrol2 = new UserControl2();
splitContainer1.Panel2.Controls.Clear();
splitContainer1.Panel2.Controls.Add(m_Usercontrol2);
}
you can do this if you want to change what usercontrol display in a panel at run time.
Correct me if i misunderstood your question.

In WinForms, you could use a tab control and just change the selected tabs index when a button is pressed. More specifically, when its click event is fired. Here is a good tutorial on using the TabControl and here is a tutorial on wiring up click events.
EDIT:
This is a better tutorial.
Since you can't hide the tabs of a tabcontrol without using WPF, you may need to use something else, if you don't like the way they look. A good workaround if you only have a couple of buttons and thus views, would be to use panels. When button one is clicked show panel one and hide panel two, etc. Here would be the code:
private void button1_Click(object sender, EventArgs e)
{
pane2.visible = false;
pane1.visible = true;
}
private void button2_Click(object sender, EventArgs e)
{
pane1.visible = false;
pane2.visible = true;
}
Hope this helps you!