Develop Reference

C# Setup Project run after install

Hello guys I'm new to the forum also programming and need some help about a project.
So I recently start developing a program that firstly must add its path at the end of Registry => Environment => Path.
For this job I created project (MainLogic) which contain a class (Program) that do the job, Installer Class that contains this events below and configured Setup Project. SOURCE
public InstallerClass1()
{
this.Committed += InstallerClass1_Committed;
this.Committing += InstallerClass1_Committing;
}
private void InstallerClass1_Committing(object sender, InstallEventArgs e)
{
//Console.WriteLine("");
//Console.WriteLine("Committing Event occurred.");
//Console.WriteLine("");
}
private void InstallerClass1_Committed(object sender, InstallEventArgs e)
{
Directory.SetCurrentDirectory(Path.GetDirectoryName
(Assembly.GetExecutingAssembly().Location));
Process.Start(Path.GetDirectoryName(
Assembly.GetExecutingAssembly().Location) + "\\MainLogic.exe");
}
The program was installed correctly but MainLogic.exe file I call after installation cause an error and can't start. The exception is Null Reference at MainLogic.Program.Main(String[] args)
Here is a picture for better understanding -
Is there a way to avoid that exception or could you offer me another that will work.
*** Here what i found. I can execute creating and typing in to file. Writing on the console. Probably a lot of other stuff without problem. But when try to execute this peace of code which actually I have to use...
Registry.CurrentUser.OpenSubKey("Pass Key", RegistryKeyPermissionCheck.ReadWriteSubTree).SetValue("Finaly", "Done");
Registry.CurrentUser.Close();
...the exception I described above occurs. Suggestions?
So the main reason for all those "exercises" is because I want to implement ffmpeg in my application.
I guess you are hear about ffmpeg (a video/audio processing program that works in command prompt).
So what I'm working on is to implement it in my project for mp3 extracting from video files but I wanna make it more user friendly so the user can pass commands through GUI and from there my code should do the other job. So ffmpeg works through command prompt (I know there is a wrappers but I'm not very satisfied with what read about) but firstly you have to add his path to Path's value in the registry. And here's where my problem came from.
Maybe it's sounds stupid for you but you know.. when you start something make it all the way.

If course you can just add exception handling and see what goes wrong but you don`t neet that anyway. Try to set the registry key directly in your Installer
[RunInstaller(true)]
public partial class Installer1 : Installer
{
public override void Install(IDictionary stateSaver)
{
base.Install(stateSaver);
const string key_path = "SOFTWARE\\YourCompany\\YourApplication";
const string key_value_name = "InstallationDirectory";
RegistryKey key = Registry.LocalMachine.OpenSubKey(key_path, Microsoft.Win32.RegistryKeyPermissionCheck.ReadWriteSubTree);
if (key == null)
{
key = Registry.LocalMachine.CreateSubKey(key_path);
}
string tgt_dir = "someDirectory";
key.SetValue(key_value_name, tgt_dir);
}
if you want to alter the path enironment variables set the key there. You can simply add a new variable or look for an exiting one (including the value) for example with Registry.GetValue MSDN-Link
User Variables
HKEY_CURRENT_USER\Environment
System Variables
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment

End page background working, WP8, C#

I dont know if it is even possible, but is there some way how to "end" page in Windows Phone 8 app?
My problem is that i am using one delegate (to know when is my xml downloaded) on multiple pages. It works fine, but when i open one page, she initialize herself, i go on other page (trough back button) and new page initialize herself too. Everything is fine, but the previous page is still listening to the delegate and it is really big problem. So i need to get the previous page (that closed) into a same state like she was not ever opened.
I will be thankful for any advice (maybe i am thinking in wrong way now, i dont know, maybe the page just have to be de-initialize).
PS: If its necessary i will post the code, but i think it is not. :)
Okey here is some code:
In class whis is downloading XML i have delegate like this:
public delegate void delDownloadCompleted();
public static event delDownloadCompleted eventDownloadCompleted;
This class is downloading few different xml files depends of constructor in run(int number) method.
After is download complete and all information from xml are saved in my local list i call delegateCompled. if (eventDownloadCompleted != null)
{
eventDownloadCompleted();
}
Then i have few different pages. All pages are used for display specific data from downloaded xml. So on this specific page I have method that is fired when "downloadClass" says it is complet.
XML_DynamicDataChat.delDownloadCompleted delegMetoda = new XML_DynamicDataChat.delDownloadCompleted(inicialiyaceListu);
XML_DynamicDataChat.eventDownloadCompleted += delegMetoda;
This is that "inicializaceListu" method:
private void inicialiyaceListu()
{
Dispatcher.BeginInvoke(() =>
{
model = new datka();
// object model is just model where i am saving all specific list of informations that i got from xml files.
chatList9 = model.getChat(1);
gui_listNovinky.ItemsSource = chatList9;
gui_loadingGrid.Visibility = Visibility.Collapsed;
});
}
All of these works fine, but when i go back (with back button) and open other specific page with other specific information from other downloaded xml, previous page is still listening for the delegate and inicialiyaceListu() method is still fired everytime i complete download of xml.
So i need to say previous page something like: "hey page, you are now closed! Can you shut the **** up and stop work?!?"
I think that specific delegate for each pages could solve this, but it is not correct programing way.

I solved it nice and easy. It is really simple solution. I just created bool variable and set it false when i go back. In inicializaceListu() i have condition if it is true. If it is true do that stuffs when false do nothing.

c# customizing controls on a save dialog -- how to disable parent folder button?

I am working from the sample project here: http://www.codeproject.com/Articles/8086/Extending-the-save-file-dialog-class-in-NET
I have hidden the address/location bar at the top and made other modifications but I can't for the life of me manage to disable the button that lets you go up to the parent folder. Ist is in the ToolbarWindow32 class which is the problem. This is what I have at the moment but it is not working:
int parentFolderWindow = GetDlgItem(parent, 0x440);
//Doesn't work
//ShowWindow((IntPtr)parentFolderWindow, SW_HIDE);
//40961 gathered from Spy++ watching messages when clicking on the control
// doesn't work
//SendMessage(parentFolderWindow, TB_ENABLEBUTTON, 40961, 0);
// doesn't work
//SendMessage(parentFolderWindow, TB_SETSTATE, 40961, 0);
//Comes back as '{static}', am I working with the wrong control maybe?
GetClassName((IntPtr)parentFolderWindow, lpClassName, (int)nLength);
Alternatively, if they do use the parent folder button and go where I don't want them to, I'm able to look at the new directory they land in, is there a way I can force the navigation to go back?
Edit: Added screenshot

//Comes back as '{static}', am I working with the wrong control maybe?
You know you are using the wrong control, you expected to see "ToolbarWindow32" back. A very significant problem, a common one for Codeproject.com code, is that this code cannot work anymore as posted. Windows has changed too much since 2004. Vista was the first version since then that added a completely new set of shell dialogs, they are based on IFileDialog. Much improved over its predecessor, in particular customizing the dialog is a lot cleaner through the IFileDialogCustomize interface. Not actually what you want to do, and customizations do not include tinkering with the navigation bar.
The IFileDialogEvents interface delivers events, the one you are looking for is the OnFolderChanging event. Designed to stop the user from navigating away from the current folder, the thing you really want to do.
While this looks good on paper, I should caution you about actually trying to use these interfaces. A common problem with anything related to the Windows shell is that they only made it easy to use from C++. The COM interfaces are the "unfriendly" kind, interfaces based on IUnknown without a type library you can use the easily add a reference to your C# or VB.NET project. Microsoft published the "Vista bridge" to make these interfaces usable from C# as well, it looks like this. Yes, yuck. Double yuck when you discover you have to do this twice, this only works on later Windows versions and there's a strong hint that you are trying to do this on XP (judging from the control ID you found).
This is simply not something you want to have to support. Since the alternative is so simple, use the supported .NET FileOk event instead. A Winforms example:
private void SaveButton_Click(object sender, EventArgs e) {
string requiredDir = Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments);
using (var dlg = new SaveFileDialog()) {
dlg.InitialDirectory = requiredDir;
dlg.FileOk += (s, cea) => {
string selectedDir = System.IO.Path.GetDirectoryName(dlg.FileName);
if (string.Compare(requiredDir, selectedDir, StringComparison.OrdinalIgnoreCase) != 0) {
string msg = string.Format("Sorry, you cannot save to this directory.\r\nPlease select '{0}' instead", requiredDir);
MessageBox.Show(msg, "Invalid folder selection");
cea.Cancel = true;
}
};
if (dlg.ShowDialog() == DialogResult.OK) {
// etc...
}
}
}

I don't this is going to work. Even if you disable the button they can type ..\ and click save and it will take them up one level. You can't exactly disable the file name text box and maintain the functionality of the dialog.
You'd be better off either using the FolderBrowserDialog and setting it's RootFolder property and asking the user to type the filename in or auto generating it.
If the folder you are wanting to restrict the users to isn't an Environment.SpecialFolder Then you'll need to do some work to make the call to SHBrowseForFolder Manually using ILCreateFromPath to get a PIDLIST_ABSOLUTE for your path to pass to the BROWSEINFO.pidlRoot
You can reflect FolderBrowserDialog.RunDialog to see how to make that call.

Since you want such custom behaviors instead of developing low level code (that is likely yo break in the next versions of windows) you can try to develop your file picker form.
Basically it is a simple treeview + list view. Microsoft has a walk-through .
It will take you half a day but once you have your custom form you can define all behaviors you need without tricks and limits.

Hyperlink to a local file doesn't work

I need to add 2 type of links to existing report with c#. For exapmle:
1) http://www.google.co.il/
2) file:///C:/index.html
I added the links, but only the "http://" works. when I press the link of "file:///" nothing happens.
I've uploaded the full project (very small though) which includes the problem:
http://www.filefactory.com/file/452gsoyymalv/n/ObjectReports.zip
BTW, the "index.html" is a simple 'helloWorld' which loaded successfully when writing the path on the address bar in the browser.
Do anyone knows what additional settings should be set to make the file link work?
*Credit for the sample (without my case):
http://www.c-sharpcorner.com/uploadfile/mahesh/reportviewerobject04172007111636am/reportviewerobject.aspx

AFAIK this is disabled for security reasons - the ReportViewer is NOT a complete browser...
You can try to circumvent that limitation by handling ReportViewer.Hyperlink event yourself... can't try it myself right now, but that's about the only option that can possibly work IMHO...

This is the detailed solution (main idea suggested by #Yahia):
First, I created the event handler:
public void HyperLinkReportHandler(Object sender, HyperlinkEventArgs e)
{
Process.Start(e.Hyperlink);
}
Second, I associated the event handler:
this.rvContainer.Hyperlink += HyperLinkReportHandler;

How do you actually implement the Search Contract? (C#)

I'm having some trouble understanding and getting the search contract to work in my Store app. I have been unable to find any sort of documentation or guide that explains the structure of using the contract. (I've looked at the quickstarts on MSDN, the Search Contract sample and the build video, but that only really deals with javascript)
So far I've been able to run a query and get a list (of Custom Objects) into my search contract page, and from there I try to assign that to defaultviewmodel.results, but no matter what query I type nothing shows up I on the page. Is there something else I need to set?
What I have so far is as follows (excerpts):
App.xaml.cs
protected override void OnSearchActivated(Windows.ApplicationModel.Activation.SearchActivatedEventArgs args)
{
SearchCharmResultsPage.Activate(args.QueryText, args.PreviousExecutionState);
SearchCharmResultsPage.ProcessSearchQuery(args.QueryText);
}
public async static void ProcessSearchQuery(string queryString)
{
try
{
StorageFile file = await ApplicationData.Current.LocalFolder.GetFileAsync("recipeCustomObject Debug.WriteLine("Database exists, connecting");
SQLiteAsyncConnection connection = new SQLiteAsyncConnection("CustomObject_db");
List<CustomObject> resultsList = new List<CustomObject>();
string query = "SELECT * FROM CustomObjectDB";
resultsList = await connection.QueryAsync<RecipeRecord>(query);
}
catch (FileNotFoundException fnfExc)
{
Debug.WriteLine("FNFEXC: " + fnfExc.ToString());
}
}
I think it is possible that here lies the problem, though I'm not sure if it is, or how to change it.
the resultsList list is created here, but because the method it asynchronous, I can't return from the method. Because of this I'm guess that when I try to assign this.DefaultViewModel[Results] = resultsList; in the LoadStateMethod, the object doesn't exist (thought the program throws no error). When I try to add the same line in the ProcessSearchQuery method, i'm told that this is not valid in a static method, but I think I need the method to be static? My problem might just be a fundamental logic error?

Finally got it! found the solution here: http://jeffblankenburg.com/2012/11/06/31-days-of-windows-8-day-6-search-contract
For those looking for an answer in the future, the key is to make sure you have your search logic within the Filter_SelectionChanged method, which was something I wasn't doing. Look at the guide within the above link to get an idea of the structure.

Have you looked at the Search contract sample on the developer center? There's a C#/XAML version there as well.

My open source Win8 RSS Reader framework implements Search (and Share) have a look at the source and if you still got questions, I'll be happy to help http://win8rssreader.codeplex.com/