I'm performing a simple SELECT statement and I'm trying to return the value from a DateTime column from a SQL Server 2012 table. The problem is that when I return a NULL DateTime value I don't know how to manage this with my code below.
dtTrainingEnd = (DateTime)reader["TrainingEnd"];
I've searched for the last few days on an answer and cannot find something that will help me. I've found similar posts but still I cannot figure out how they can help me. Can you please explain how I can check to see if the datetime value returned from the database is NULL?
SqlConnection connRead = new SqlConnection(connReadString);
SqlCommand comm = new SqlCommand();
SqlDataReader reader;
string sql;
DateTime dtTrainingEnd = DateTime.Now;
int iTrainingSwipeID = 123;
sql = "SELECT TrainingEnd FROM TrainingSwipe WHERE TrainingSwipeID = " + iTrainingSwipeID;
comm.CommandText = sql;
comm.CommandType = CommandType.Text;
comm.Connection = connRead;
connRead.Open();
reader = comm.ExecuteReader();
while (reader.Read())
{
dtTrainingEnd = (DateTime)reader["TrainingEnd"];
}
connRead.Close();
If it might be null, you could use a nullable type... in this case, a DateTime? type:
while (reader.Read())
{
dtTrainingEnd = ((DateTime?)reader["TrainingEnd"]) ?? some_default_date;
}
connRead.Close();
Or just test for null if you'd rather do that:
while (reader.Read())
{
var endDate = reader["TrainingEnd"];
dtTrainingEnd = (endDate == null) ? some_default_date : (DateTime)endDate;
}
connRead.Close();
In both cases above, I assumed you want dtTrainingEnd to contain something if the date is NULL in the database, so some_default_date is some default DateTime.
Or if you want to leave dtTrainingEnd alone if the value is NULL, then just don't set it in that case:
while (reader.Read())
{
if ((reader["TrainingEnd"]) != null)
dtTrainingEnd = (DateTime)reader["TrainingEnd"];
}
connRead.Close();
*** Depending on how you connect to your db, you may have to replace null with DBNull.Value
With SQL you can do SELECT Coalesce(TrainingEnd,0) and if it is null, you would have a 1900-01-01 date...
I have in stored procedure in SQL Server that use function and return RESULT a decimal.
In C# I need to get it but I get an error :
"INVALLD CastEXCEPTION was unhandeld by user code" "an exception of
type 'system.invaildCastException' occured...'
My C# code:
decimal? val = null;
SqlConnection con = new SqlConnection(conStr);
con.Open();
using (con)
{
SqlCommand cmd = new SqlCommand("dbo.spSetOrderDetails", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter tvpParam = cmd.Parameters.AddWithValue("#OrderDetailsItemsTVP", dt);
tvpParam.SqlDbType = SqlDbType.Structured;
// this part of code return the SUM
SqlParameter returnParam = cmd.Parameters.Add("#RESULT", SqlDbType.Decimal);
returnParam.Direction = ParameterDirection.ReturnValue;
cmd.ExecuteNonQuery();
val = (decimal)cmd.Parameters["#RESULT"].Value;--HERE I GET THE EXCEPTION
}
con.Close();
return (decimal)val;
You can't cast the parameter with ParameterDirection.ReturnValue to a datatype that is not an integer.
The RETURN statement in T-SQL can only return integer values.
However, if you are absolutely certain that your Stored Procedure ends always with something like RETURN xxx then you could
val = Convert.ToDecimal(cmd.Parameters["#RESULT"].Value);
var res = cmd.Parameters["#RESULT"];
if(res != null && res.Value != null && res.Value != DbNull.value){
val = Convert.ToDecimal(res.Value);
}
else
val = defaultvalue;
This code will check if it's null or equal to dbnull.value. It will only cast if it's not null or dbnull.value. In case of null (or dbnull.value) it will simply set the value to defaultvalue for decimal.
This question already has answers here:
What is a NullReferenceException, and how do I fix it?
(27 answers)
ExecuteScalar returns null or DBNull (development or production server)
(3 answers)
Closed 8 years ago.
I have the following function which checks to see if a user(strU) exist in the table for a column, if so return 1, otherwise return 0:
public int AddDataScalar(string strU)
{
string strQueryExistence = "SELECT 1 FROM [OB].[h].[OP_PEONS] WHERE Executive= '" + strU + "'";
int inNum;
using (SqlConnection con = new SqlConnection(strConn))
{
con.Open();
SqlCommand cmd = new SqlCommand(strQueryExistence, con);
object value = cmd.ExecuteScalar().ToString();
if (value != null)
{
inNum = 1;
}
else
{
inNum = 0;
}
con.Close();
}
return inNum;
}
It is failing in this line: object value = cmd.ExecuteScalar().ToString();
With the following error: Object reference not set to an instance of an object.
How do I resolve it?
ExecuteScalar returns null if your WHERE condition doesn't produce any result.
If you apply any kind of conversion when ExecuteScalar returns null you are in trouble.
Said that, I really suggest some changes to your query
public int AddDataScalar(string strU)
{
string strQueryExistence = #"IF EXISTS(SELECT 1 FROM [OB].[h].[OP_PEONS]
WHERE Executive= #stru) SELECT 1 ELSE SELECT 0";
int inNum = 0;
using (SqlConnection con = new SqlConnection(strConn))
using ( SqlCommand cmd = new SqlCommand(strQueryExistence, con))
{
con.Open();
cmd.Parameters.AddWithValue("#stru", strU);
inNum = Convert.ToInt32(cmd.ExecuteScalar());
}
return inNum;
}
The first thing is the IF EXISTS t-sql functions that is the fastest way to discover if a specific record exists or not in the table. The second point is the usage of a parameterized query to avoid parsing problems and Sql Injection scenarios.
The IF EXISTS statement allows to be sure that the ExecuteScalar doesn't return null because in that case the ELSE part will return zero
whenever cmd.ExecuteScalar() returns null then null.ToString() throws the exception.
In your case, just use teкnary operator:
inNum = cmd.ExecuteScalar() == null ? 0 : 1;
The implementation could be
public int AddDataScalar(string strU) {
using (SqlConnection con = new SqlConnection(strConn)) {
con.Open();
// Make your SQL readable: use #"" strings
strQueryExistence =
#"SELECT 1
FROM [OB].[h].[OP_PEONS]
WHERE Executive = #prm_Executive";
// using is a better practice
using (SqlCommand cmd = new SqlCommand(strQueryExistence, con)) {
// parameters are better than hardcoding
cmd.Parameters.AddWithValue("#prm_Executive", strU);
return cmd.ExecuteScalar() == null ? 0 : 1;
}
}
}
According to MSDN (http://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlcommand.executescalar(v=vs.110).aspx):
The first column of the first row in the result set, or a null reference (Nothing in Visual Basic) if the result set is empty.
You're calling .ToString() (why?) on a null object, since there are no results being returned. Skip the .ToString() call and it should work fine.
If object returned by cmd.ExecuteScalar() is null, you will get this exception. Use:
string value = System.Convert.ToString(cmd.ExecuteScalar());
if you need the result converted to string.
I have a function in a class "Checkout" that runs a sql statement to insert a record into a table, then select the scope_identity, giving me the ID of that record. It returns the ID as an int, and I assign it to a variable in the webpage:
int OrderID = Checkout.WriteOrder_tblOrders(CustID);
Here's the function:
public static int WriteOrder_tblOrders(int CustID)
{
// OrderID is initially 0, then changed when scope_identity is called in the sql statement.
int OrderID = 0;
DateTime OrderDate = DateTime.Now;
string sql = "INSERT INTO tblOrders (OrderDate, CustID) VALUES (#OrderDate, #CustID); SELECT scope_identity();";
using (SqlConnection myConnection = new SqlConnection(connectString))
{
using (SqlCommand cmd = new SqlCommand(sql, myConnection))
{
cmd.Parameters.AddWithValue("#CustID", CustID);
cmd.Parameters.AddWithValue("#OrderDate", OrderDate);
myConnection.Open();
OrderID = (int)cmd.ExecuteScalar();
myConnection.Close();
}
}
return OrderID;
}
The debugger shows that there's nothing wrong with the function, and new records are showing up correctly in that table, but I'm getting an
"Invalid Cast"
error on the first line, where I assign OrderID. I've tried this:
int OrderID = (int)Checkout.WriteOrder_tblOrders(CustID);
With both int and Int32, and also tried using Convert.ToInt32, which didn't work either. What am I doing wrong here?
The reason may be you are getting null values.
So you ca create an extension method as follows
public static T ExecuteNullableScalar<T>(this SqlCommand cmd) where T : struct
{
var result = cmd.ExecuteScalar();
if (result == DBNull.Value) return default(T);
return (T)result;
}
Usage becomes:
int value = cmd.ExecuteNullableScalar<int>();
//new approach
ulong value=cmd.ExecuteNullableScalar<ulong>();
Other-Wise
myConnection.Open();
var o = cmd.ExecuteScalar();
OrderID = (o== DBNull.Value ? 0 : Convert.ToUInt64(o));
myConnection.Close();
changed
OrderID = (o== DBNull.Value ? 0 : Convert.ToUInt64(o));
Thanks for your help guys, didn't realize that scope_identity returns a decimal. I altered the code like this:
OrderID = Convert.ToInt32((decimal)cmd.ExecuteScalar());
It now works fine. Thanks!
I am using the following SQL query and the ExecuteScalar() method to fetch data from an Oracle database:
sql = "select username from usermst where userid=2"
string getusername = command.ExecuteScalar();
It is showing me this error message:
System.NullReferenceException: Object reference not set to an instance of an object
This error occurs when there is no row in the database table for userid=2.
How should I handle this situation?
According to MSDN documentation for DbCommand.ExecuteScalar:
If the first column of the first row in the result set is not found, a
null reference (Nothing in Visual Basic) is returned. If the value in
the database is null, the query returns DBNull.Value.
Consider the following snippet:
using (var conn = new OracleConnection(...)) {
conn.Open();
var command = conn.CreateCommand();
command.CommandText = "select username from usermst where userid=2";
string getusername = (string)command.ExecuteScalar();
}
At run-time (tested under ODP.NET but should be the same under any ADO.NET provider), it behaves like this:
If the row does not exist, the result of command.ExecuteScalar() is null, which is then casted to a null string and assigned to getusername.
If the row exists, but has NULL in username (is this even possible in your DB?), the result of command.ExecuteScalar() is DBNull.Value, resulting in an InvalidCastException.
In any case, the NullReferenceException should not be possible, so your problem probably lies elsewhere.
First you should ensure that your command object is not null. Then you should set the CommandText property of the command to your sql query. Finally you should store the return value in an object variable and check if it is null before using it:
command = new OracleCommand(connection)
command.CommandText = sql
object userNameObj = command.ExecuteScalar()
if (userNameObj != null)
string getUserName = userNameObj.ToString()
...
I'm not sure about the VB syntax but you get the idea.
I just used this:
int? ReadTerminalID()
{
int? terminalID = null;
using (FbConnection conn = connManager.CreateFbConnection())
{
conn.Open();
FbCommand fbCommand = conn.CreateCommand();
fbCommand.CommandText = "SPSYNCGETIDTERMINAL";
fbCommand.CommandType = CommandType.StoredProcedure;
object result = fbCommand.ExecuteScalar(); // ExecuteScalar fails on null
if (result.GetType() != typeof(DBNull))
{
terminalID = (int?)result;
}
}
return terminalID;
}
The following line:
string getusername = command.ExecuteScalar();
... will try to implicitly convert the result to string, like below:
string getusername = (string)command.ExecuteScalar();
The regular casting operator will fail if the object is null.
Try using the as-operator, like this:
string getusername = command.ExecuteScalar() as string;
sql = "select username from usermst where userid=2"
var _getusername = command.ExecuteScalar();
if(_getusername != DBNull.Value)
{
getusername = _getusername.ToString();
}
Check out the example below:
using System;
using System.Data;
using System.Data.SqlClient;
class ExecuteScalar
{
public static void Main()
{
SqlConnection mySqlConnection =new SqlConnection("server=(local)\\SQLEXPRESS;database=MyDatabase;Integrated Security=SSPI;");
SqlCommand mySqlCommand = mySqlConnection.CreateCommand();
mySqlCommand.CommandText ="SELECT COUNT(*) FROM Employee";
mySqlConnection.Open();
int returnValue = (int) mySqlCommand.ExecuteScalar();
Console.WriteLine("mySqlCommand.ExecuteScalar() = " + returnValue);
mySqlConnection.Close();
}
}
from this here
SQL NULL value
equivalent in C# is DBNull.Value
if a NULLABLE column has no value, this is what is returned
comparison in SQL: IF ( value IS NULL )
comparison in C#: if (obj == DBNull.Value)
visually represented in C# Quick-Watch as {}
Best practice when reading from a data reader:
var reader = cmd.ExecuteReader();
...
var result = (reader[i] == DBNull.Value ? "" : reader[i].ToString());
In my experience, there are some cases the returned value can be missing and thus execution fails by returning null. An example would be
select MAX(ID) from <table name> where <impossible condition>
The above script cannot find anything to find a MAX in. So it fails. In these such cases we must compare the old fashion way (compare with C# null)
var obj = cmd.ExecuteScalar();
var result = (obj == null ? -1 : Convert.ToInt32(obj));
If you either want the string or an empty string in case something is null, without anything can break:
using (var cmd = new OdbcCommand(cmdText, connection))
{
var result = string.Empty;
var scalar = cmd.ExecuteScalar();
if (scalar != DBNull.Value) // Case where the DB value is null
{
result = Convert.ToString(scalar); // Case where the query doesn't return any rows.
// Note: Convert.ToString() returns an empty string if the object is null.
// It doesn't break, like scalar.ToString() would have.
}
return result;
}
Always have a check before reading row.
if (SqlCommand.ExecuteScalar() == null)
{
}
This is the easiest way to do this...
sql = "select username from usermst where userid=2"
object getusername = command.ExecuteScalar();
if (getusername!=null)
{
//do whatever with the value here
//use getusername.toString() to get the value from the query
}
In your case either the record doesn't exist with the userid=2 or it may contain a null value in first column, because if no value is found for the query result used in SQL command, ExecuteScalar() returns null.
Alternatively, you can use DataTable to check if there's any row:
SqlCommand cmd = new SqlCommand("select username from usermst where userid=2", conn);
SqlDataAdapter adp = new SqlDataAdapter(cmd);
DataTable dt = new DataTable();
adp.Fill(dt);
string getusername = "";
// assuming userid is unique
if (dt.Rows.Count > 0)
getusername = dt.Rows[0]["username"].ToString();
private static string GetUserNameById(string sId, string connStr)
{
System.Data.SqlClient.SqlConnection conn = new System.Data.SqlClient.SqlConnection(connStr);
System.Data.SqlClient.SqlCommand command;
try
{
// To be Assigned with Return value from DB
object getusername;
command = new System.Data.SqlClient.SqlCommand();
command.CommandText = "Select userName from [User] where userid = #userid";
command.Parameters.AddWithValue("#userid", sId);
command.CommandType = CommandType.Text;
conn.Open();
command.Connection = conn;
//Execute
getusername = command.ExecuteScalar();
//check for null due to non existent value in db and return default empty string
string UserName = getusername == null ? string.Empty : getusername.ToString();
return UserName;
}
catch (Exception ex)
{
throw new Exception("Could not get username", ex);
}
finally
{
conn.Close();
}
}
Slight conjecture: if you check the stack for the exception, it is being thrown then the ADO.NET provider for Oracle is reading the underlying rowset to get the first value.
If there is no row, then there is no value to find.
To handle this case execute for a reader and handle Next() returning false for the case of no match.
I Use it Like This with Microsoft Application Block DLL (Its a help library for DAL operations)
public string getCopay(string PatientID)
{
string sqlStr = "select ISNULL(Copay,'') Copay from Test where patient_id=" + PatientID ;
string strCopay = (string)SqlHelper.ExecuteScalar(CommonCS.ConnectionString, CommandType.Text, sqlStr);
if (String.IsNullOrEmpty(strCopay))
return "";
else
return strCopay ;
}
I have seen in VS2010
string getusername = command.ExecuteScalar();
gives compilation error,
Cannot implicitly convert type object to string.
So you need to write
string getusername = command.ExecuteScalar().ToString();
when there is no record found in database it gives error
Object reference not set to an instance of an object
and when I comment '.ToString()', it is not give any error. So I can say ExecuteScalar not throw an exception. I think anserwer given by #Rune Grimstad is right.
I had this issue when the user connecting to the database had CONNECT permissions, but no permissions to read from the database. In my case, I could not even do something like this:
object userNameObj = command.ExecuteScalar()
Putting this in a try/catch (which you should probably be doing anyway) was the only way I could see to handle the insufficient permission issue.
object objUserName;
objUserName = command.ExecuteScalar();
if (objUserName == null) //if record not found ExecuteScalar returns null
{
return "";
}
else
{
if (objUserName == DBNull.Value) //if record found but value in record field is null
{
return "";
}
else
{
string getusername = objUserName.ToString();
return getusername;
}
}
/* Select some int which does not exist */
int x = ((int)(SQL_Cmd.ExecuteScalar() ?? 0));
I used this in my vb code for the return value of a function:
If obj <> Nothing Then
Return obj.ToString()
Else
Return ""
End If
Try this code, it appears to solve your problem.
Dim MaxID As Integer = Convert.ToInt32(IIf(IsDBNull(cmd.ExecuteScalar()), 1, cmd.ExecuteScalar()))
I'm using Oracle.
If your sql returns numeric value, which is int, you need to use Convert.ToInt32(object). Here is the example below:
public int GetUsersCount(int userId)
{
using (var conn = new OracleConnection(...)){
conn.Open();
using(var command = conn.CreateCommand()){
command.CommandText = "select count(*) from users where userid = :userId";
command.AddParameter(":userId", userId);
var rowCount = command.ExecuteScalar();
return rowCount == null ? 0 : Convert.ToInt32(rowCount);
}
}
}
Try this
sql = "select username from usermst where userid=2"
string getusername = Convert.ToString(command.ExecuteScalar());