I've got a C# program that was built as a Windows service. I tested this last week and it worked fine, but today I'm getting an error.
When I try to install using installutil.exe, I get the error:
Could not load file or assembly [file name] or one of its dependencies. The module was expected to contain an assembly manifest.
Rebuilding the project had no effect. I also noticed in task manager that the service is still listed and running. On the chance that might be interfering with the installation, I tried uninstalling via installutil, but got the same error message back again.
I've seen many other questions related to this error, but most of them have either no answer, or a very specific answer related to their unique situation. Has anybody had this happen, and how did you fix it? Any ideas are appreciated.
Update:
I successfully uninstalled the service using the "sc delete" command via command prompt, but I'm still getting the same error from installutil on trying to reinstall.
Update 2:
Just for the sake of trying something, I deleted the bin folder from the project, reopened the solution, and did a clean and build. It still won't install, but now I've got a different message:
This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
Question:
What would cause there to be a mismatch in runtimes? As far as I know, I've only used .NET Framework 4.5 and haven't deviated. Is there a value I should be looking at / changing to fix that?
Update 3:
Here's what I've tried so far:
One answer suggested the version of installutil being used matters. I'd been running v2.0.50727, but there's also a v4.0.30319 I hadn't thought to try. Running this resulted in:
An attempt was made to load a program with an incorrect format...
I'd be willing to work on that error instead, if it would solve the problem. However, I'm compelled to think that's not the problem since I'd been successfully running v2.0.etc just before the first error popped up.
Inside App.config, there's a line "supported Runtime version=v4.0". I switched this to 4.5, but it had no effect good or bad.
I tried switching the target framework (under project properties) down to 4.0, but this cause an error with:
Some NuGet packages were installed using a target framework different from the current target framework, etc...
This was referring to the EntityFramework, and I'd rather not start messing with NuGet again unless it's the only way (last time it was a nightmare).
I tried installing the service on the target server (the machine it will eventually be deployed to) and got the same error. This leads me to think it's a problem with the project / solution and not the pc.
Looks like a assembly loading problem. Use the Fuslogvw.exe utility. Start it from the Visual Studio Command Prompt. Click the Settings button and click the "Log binding failures to disk" radio button. Switch back to VS and start the program and wait for the exception to occur. Back to Fuslogvw, click the Refresh button and double-click the added entry. It will show you the file it found.
One another possibility is to trying to load a .NET 4 assembly with an EXE that asked for CLR version 2. That requires an app.exe.config file that forces CLR 4 to be used.
I have developed an application using Entity Framework, SQL Server 2000, Visual Studio 2008 and Enterprise Library.
It works absolutely fine locally, but when I deploy the project to our test environment, I am getting the following error:
Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information
Stack trace: at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark)
at System.Reflection.Assembly.GetTypes()
at System.Data.Metadata.Edm.ObjectItemCollection.AssemblyCacheEntry.LoadTypesFromAssembly(LoadingContext context)
at System.Data.Metadata.Edm.ObjectItemCollection.AssemblyCacheEntry.InternalLoadAssemblyFromCache(LoadingContext context)
at System.Data.Metadata.Edm.ObjectItemCollection.AssemblyCacheEntry.LoadAssemblyFromCache(Assembly assembly, Boolean loadReferencedAssemblies, Dictionary2 knownAssemblies, Dictionary2& typesInLoading, List`1& errors)
at System.Data.Metadata.Edm.ObjectItemCollection.LoadAssemblyFromCache(ObjectItemCollection objectItemCollection, Assembly assembly, Boolean loadReferencedAssemblies)
at System.Data.Metadata.Edm.ObjectItemCollection.LoadAssemblyForType(Type type)
at System.Data.Metadata.Edm.MetadataWorkspace.LoadAssemblyForType(Type type, Assembly callingAssembly)
at System.Data.Objects.ObjectContext.CreateQuery[T](String queryString, ObjectParameter[] parameters)
Entity Framework seems to have issue, any clue how to fix it?
This error has no true magic bullet answer. The key is to have all the information to understand the problem. Most likely a dynamically loaded assembly is missing a referenced assembly. That assembly needs to be in the bin directory of your application.
Use this code to determine what is missing.
using System.IO;
using System.Reflection;
using System.Text;
try
{
//The code that causes the error goes here.
}
catch (ReflectionTypeLoadException ex)
{
StringBuilder sb = new StringBuilder();
foreach (Exception exSub in ex.LoaderExceptions)
{
sb.AppendLine(exSub.Message);
FileNotFoundException exFileNotFound = exSub as FileNotFoundException;
if (exFileNotFound != null)
{
if(!string.IsNullOrEmpty(exFileNotFound.FusionLog))
{
sb.AppendLine("Fusion Log:");
sb.AppendLine(exFileNotFound.FusionLog);
}
}
sb.AppendLine();
}
string errorMessage = sb.ToString();
//Display or log the error based on your application.
}
I solved this issue by setting the Copy Local attribute of my project's references to true.
One solution that worked for me was to delete the bin/ and obj/ folders and rebuild the solution.
Update:
Or you can try to right-click the Solution node in the "Solution Explorer" and click "Clean Solution", then click "Rebuild Solution" (thanks Emre Guldogan)
Two possible solutions:
You are compiling in Release mode but deploying an older compiled version from your Debug directory (or vise versa).
You don't have the correct version of the .NET Framework installed in your test environment.
As it has been mentioned before, it's usually the case of an assembly not being there.
To know exactly what assembly you're missing, attach your debugger, set a breakpoint and when you see the exception object, drill down to the 'LoaderExceptions' property. The missing assembly should be there.
Hope it helps!
The solution was to check the LoaderException: In my case, some of the DLL files were missing.
Make sure you allow 32 bits applications on IIS if you did deploy to IIS. You can define this on the settings of your current Application Pool.
I encountered this error with an ASP.NET 4 + SQL Server 2008 R2 + Entity Framework 4 application.
It would work fine on my development machine (Windows Vista 64-bit). Then when deployed to the server (Windows Server 2008 R2 SP1), it would work until the session timed out. So we'd deploy the application and everything looked fine and then leave it for more than the 20 minute session timeout and then this error would be thrown.
To solve it, I used this code on Ken Cox's blog to retrieve the LoaderExceptions property.
For my situation the missing DLL was Microsoft.ReportViewer.ProcessingObjectModel (version 10). This DLL needs to be installed in the GAC of the machine the application runs on. You can find it in the Microsoft Report Viewer 2010 Redistributable Package available on the Microsoft download site.
My instance of this problem ended up being a missing reference. An assembly was referred to in the app.config but didn't have a reference in the project.
Initially I tried the Fusion log viewer, but that didn't help
so I ended up using WinDbg with the SOS extension.
!dumpheap -stat -type Exception /D
Then I examined the FileNotFoundExceptions. The message in the exception contained the name of the DLL that wasn't loading.
N.B., the /D give you hyperlinked results, so click on the link in the summary for FileNotFoundException. That will bring up a list of the exceptions. Then click on the link for one of the exceptions. That will !dumpobject that exceptions. Then you should just be able to click on the link for Message in the exception object, and you'll see the text.
If you're using the EntityDataSource in your project, the solution is in Fix: 'Unable to load one or more of the requested types' Errors. You should set the ContextTypeName="ProjectNameNameSpace.EntityContainerName" '
This solved my problems...
Another solution to know why exactly nothing works (from Microsoft connect):
Add this code to the project:
foreach (var asm in AppDomain.CurrentDomain.GetAssemblies())
{
asm.GetTypes();
}
Turn off generation serialization assemblies.
Build and execute.
If you are using Entity Framework, try copying the following references locally.
System.Data.Entity
System.Web.Entity
Change the property "Copy Local" to "True" for these references and publish.
I had a .NET 4.0, ASP.NET MVC 2.0, Entity Framework 4.0 web application developed in Visual Studio 2010. I had the same problem, that it worked on one Windows Server 2008 R2 server but not on another Windows Server 2008 R2 server, even though the versions of .NET and ASP.NET MVC were the same, throwing this same error as yours.
I went to follow miko's suggestion, so I installed Windows SDK v7.1 (x64) on the failing server, so I could run !dumpheap.
Well, it turns out that installing Windows SDK v7.1 (x64) resolved the issue. Whatever dependency was missing must have been included in the SDK. It can be downloaded from Microsoft Windows SDK for Windows 7 and .NET Framework 4.
Adding my specific problem/solution to this as this is the first result for this error message. In my case, the error was received when I deployed a second application within the folder of my first application in IIS. Both were defining connection string with the same name resulting in the child application having a conflict and in turn generating this (to me) non-obvious error message. It was solved by adding:
<clear/>
in the connection string block of the child web application which prevented it from inheriting the connection strings of web.config files higher in the hierarchy, so it looks like:
<connectionStrings>
<clear/>
<add name="DbContext" connectionString="MySERVER" providerName="System.Data.SqlClient" />
</connectionStrings>
A reference Stack Overflow question which helped once I determined what was
going on was Will a child application inherit from its parent web.config?.
This worked for me. Add it in your web.config
<system.web>
<trust level="Full" />
My issue has been resolved after I deleted the redundant assembly files from the bin folder.
In case none of the other answers help you:
When I had this problem, it turned out my Windows service was built for an x64 platform, and I was inadvertently running the 32-bit version of InstallUtil.exe. So make sure you're using the right version of InstallUtil for the platform you built for.
Other suggestions are all good. In my case, the problem was that the developer box was a 64-bit machine using the x86 location of various APIs, including Silverlight.
By changing the target platform to match the 32-bit server where the web application was being deployed removed the majority of the errors related to not being able to load one or more of the requested types.
I changed the Specific Version Property of the Refrences to false and that helped.
I had the same error message reported when compiling a Visual Studio package (VSPackage). The whole solution compiles and the error is thrown when the package is being created by CreatePkgDef. Having said that, it is clear that I cannot catch the LoaderExceptions as it is not my application that throws it, but Microsoft's own tool. (Though I am responsible for the confusion of CreatePkgDef.)
In my case the root cause was that my solution creates a MyDll.dll that has already been registered to the GAC (and they are different), so the CreatePgkDef got confused which one to use and it decided just to throw an error which isn't really helpful. The MyDll.dll in the GAC was registered by the installer of the same product (obviously an earlier version, with /slightly/ different content).
How to fix it
Preferred way: Make sure you use the correct version of MyDll.dll
When compiling your project make sure you use a different version number than you used in the previous version located in the GAC. Make sure the following attributes are correct:
[assembly: AssemblyVersion("1.0.0.1")] // Assuming the old DLL file was versioned 1.0.0.0
[assembly: AssemblyFileVersion("1.0.0.1")] // Assuming the old DLL file was versioned 1.0.0.0
If needed, specify the fully qualified assembly name (for example, "MyDll.dll, Version=1.0.0.1, Culture=neutral, PublicKeyToken=1234567890abcdef") when you reference it in your other projects.
If the above failed: You can uninstall the old MyDll.dll from GAC
How to Uninstall an Assembly from the GAC
Uninstall the application that includes MyDll.dll
Changing the AssemblyVersion was good enough for me. :)
I hope this was helpful.
I had the same issue (but on my local) when I was trying to add Entity Framework migration with Package Manager Console.
The way I solved it was by creating a console application where Main() had the following code:
var dbConfig = new Configuration();
var dbMigrator = new DbMigrator(dbConfig);
dbMigrator.Update();
Make sure the Configuration class is the migration Configuration of your failing project. You will need System.Data.Entity.Migrations to use DbMigrator.
Set a breakpoint in your application, and run it. The exception should be caught by Visual Studio (unless you have that exception type set to not break the debug session), and you should be able to find the info you are looking for.
The missing reference in my case was EFProviderWrapperToolkit.
I got this problem when I installed a NuGet package on one of the projects and forgot to update the other project.
I solved this by just making both projects having the same reference assembly.
It happened for me also. I solved the problem as follows:
Right click Solution, Manage NuGet Packages for Solution...
Consolidate packages and upgraded the packages to be in the same version.
I had this issue while referencing a nuget package and later on using the remove option to delete it from my project. I had to clear the bin folder after battling with the issue for hours. To avoid this its advisable to use nuget to uninstall unwanted packages rather than the usual delete
Set 32 bit IIS mode to true, debug mode to true in the configuration file, deleting the temp directory and resetting IIS fixes the issue temporally and it comes back after some time.
Verify that each of your projects is setup correctly in the Configuration Manager.
Similar to William Edmondson's reason for this issue, I switched my Configuration Manager setting from "Debug" "Any CPU" to "Debug" ".NET". The problem was that the ".NET" version was NOT configured to build ALL of the projects, so some of my DLLs were out of date (while others were current). This caused numerous problems with starting the application.
The temporary fix was to do Kenny Eliasson's suggestion to clean out the \bin and \obj directories. However, as soon as I made more changes to the non-compiling projects, everything would fail again.
I also got this issue when create new Microsoft Word add-in with Visual Studio 2015. The issue is about I have 2 versions of MS Office, 2013 and 2016. I uninstall MS Office 2013 and then it works.
I build a few projects for SharePoint and, of course, deployed them. One time it happened.
I found an old assembly in C:\Windows\assembly\temp\xxx (with FarManager), removed it after reboot, and all projects built.
I have question for MSBuild, because in project assemblies linked like projects and every assembly is marked "Copy local", but not from the GAC.
I am able to fix this issue by marking "Copy Local=True" on all referenced DLL files in the project, rebuilding and deploying on a testing server.
For about 2 weeks now, I have been unable to run any UnitTests (built in VS unit tests) for a project. Previously everything worked fine. The error message is:
Could not load file or assembly 'C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\MyProjectName.XmlSerializers.dll" or one of its dependencies.
The project references System.Xml.Serialization and uses the XmlSerializer class; just like many other classes/projects I've written. For some reason, only this project is affected. It builds fine, runs fine, I just can't run my unit tests.
I've checked the directory, and all the dlls in that directory are Microsoft dlls. The dll that it is looking for obviously is not a Microsoft dll.
Anyone have any ideas?
Edit:
It apparently has something to do with using the XmlSerializer and it generating that file automatically instead of using sgen.exe. Here is a link to the MSDN article. From what I've been able to find, it has something to do with using the serializer with generics. None of the sources I've found seem to offer any way to make it actually work.
First enable loader logging (using FUSLOGVW.exe from the SDK) to confirm what is not being found.
Then use Reflector on all your assemblies to find the one that is trying to load the non-existent assembly. If you find no such assembly it must be being loaded dynamically, in which case attaching to AppDomain.AssemblyResolve should allow you to identify where.
try to copy all your source files somewhere, then delete the project and try to make it from scratch. Maybe something happened with project dependencies
Is your computer 64bit? I got the same error when trying to run a 64bit dll with NUnit that was set to work as an x86 assembly (using corflags).
You can probably find out from the error message (use FUSLOGVW.exe lick Richard suggested).
If that is the case you can either sent the dll or NUnit to run as the correct assembly using corflags.
Solution
As it turns out, the problem was with VMWare. I installed the latest version of VMWare, and it installed it's tools to debug in a VM. Something it installed or changed caused this problem. When I uninstalled VMWare, the problem went away. So, I reinstalled VMWare without installing it's debugging capabilities and the problem did not come back.
Workaround:
I still have no idea why this problem suddenly started occurring, but I found a hack to make it work.
I had to go to project properties => Build Events and add this line to the Post-build event command line:
"C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\Bin\sgen.exe" "$(TargetPath)" /force
This forces VS to generate the file. I then had to copy that file manually to the directory it was looking for it in:
"C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies"
Now it I can run my tests and step through them. The problems I have now are 1) I have to remember to copy the dll to that directory every time I change something in the classes that I am serializing, and 2) I now get a ThreadInterruptedException when a test finishes running; thus 3) I can only run one test at a time.
Not a good solution, but at least I can limp through. Unfortunately, redoing everything, as Nikita Borodulin suggested, is not an option.