Related
I want to send an email from my application and i have written following code for sending mail
MailMessage msg = new MailMessage();
msg.From = new MailAddress("mymailid");
msg.To.Add("receipientid");
msg.Subject = "test";
msg.Body = "Test Content";
msg.Priority = MailPriority.High;
SmtpClient client = new SmtpClient();
client.Credentials = new NetworkCredential("mymailid", "mypassword", "smtp.gmail.com");
client.Host = "smtp.gmail.com";
client.Port = 587;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.EnableSsl = true;
client.UseDefaultCredentials = true;
client.Send(msg);
I am running it on localhost so what mistake i am doing to send it.
When i send button it gives an error like
The SMTP server requires a secure connection or the client was not
authenticated. The server response was: 5.5.1 Authentication
Required.
Code in Web.config file
<appSettings>
<add key="webpages:Version" value="2.0.0.0" />
<add key="webpages:Enabled" value="false" />
<add key="PreserveLoginUrl" value="true" />
<add key="ClientValidationEnabled" value="true" />
<add key="UnobtrusiveJavaScriptEnabled" value="true" />
<add key="smtpServer" value="smtp.gmail.com" />
<add key="EnableSsl" value = "true"/>
<add key="smtpPort" value="587" />
<add key="smtpUser" value="sender#gmail.com" />
<add key="smtpPass" value="mypassword" />
<add key="adminEmail" value="sender#gmail.com" />
</appSettings>
<system.net>
<mailSettings>
<smtp from="sender#gmail.com">
<network host="smtp.gmail.com" password="mypassword" port="587" userName="sender#gmail.com" enableSsl="true"/>
</smtp>
</mailSettings>
</system.net>
what should i do to solve this error and send mail??
I have the same problem.
I have found this solution:
Google may block sign in attempts from some apps or devices that do not use modern security standards. Since these apps and devices are easier to break into, blocking them helps keep your account safer.
Some examples of apps that do not support the latest security standards include:
The Mail app on your iPhone or iPad with iOS 6 or below
The Mail app on your Windows phone preceding the 8.1 release
Some Desktop mail clients like Microsoft Outlook and Mozilla Thunderbird
Therefore, you have to enable Less Secure Sign-In (or Less secure app access) in your google account.
After sign into google account, go to:
https://www.google.com/settings/security/lesssecureapps
or
https://myaccount.google.com/lesssecureapps
In C#, you can use the following code:
using (MailMessage mail = new MailMessage())
{
mail.From = new MailAddress("email#gmail.com");
mail.To.Add("somebody#domain.com");
mail.Subject = "Hello World";
mail.Body = "<h1>Hello</h1>";
mail.IsBodyHtml = true;
mail.Attachments.Add(new Attachment("C:\\file.zip"));
using (SmtpClient smtp = new SmtpClient("smtp.gmail.com", 587))
{
smtp.Credentials = new NetworkCredential("email#gmail.com", "password");
smtp.EnableSsl = true;
smtp.Send(mail);
}
}
First check for gmail's security related issues. You may have enabled double authentication in gmail. Also check your gmail inbox if you are getting any security alerts. In such cases check other answer of #mjb as below
Below is the very general thing that i always check first for such issues
client.UseDefaultCredentials = true;
set it to false.
Note #Joe King's answer - you must set client.UseDefaultCredentials before you set client.Credentials
Ensure you set SmtpClient.Credentials after calling SmtpClient.UseDefaultCredentials = false.
The order is important as setting SmtpClient.UseDefaultCredentials = false will reset SmtpClient.Credentials to null.
I've searched and tried different things for hours.. To summarize, I had to take into consideration the following points:
Use smtp.gmail.com instead of smtp.google.com
Use port 587
Set client.UseDefaultCredentials = false; before setting credentials
Turn on the Access for less secure apps
Set client.EnableSsl = true;
If these steps didn't help, check this answer.
Perhaps, you can find something useful on this System.Net.Mail FAQ too.
App Passwords helped me.
Go to https://myaccount.google.com/security.
Scroll down to "Signing in to Google".
Enable 2-Step Verification.
Add App Password.
Use the generated password in your code.
Try to login in your gmail account. it gets locked if you send emails by using gmail SMTP. I don't know the limit of emails you can send before it gets locked but if you login one time then it works again from code.
make sure your webconfig setting are good.
Try it this way, I just made some light changes:
MailMessage msg = new MailMessage();
msg.From = new MailAddress("mymailid#gmail.com");
msg.To.Add("receipientid#gmail.com");
msg.Subject = "test";
msg.Body = "Test Content";
//msg.Priority = MailPriority.High;
using (SmtpClient client = new SmtpClient())
{
client.EnableSsl = true;
client.UseDefaultCredentials = false;
client.Credentials = new NetworkCredential("mymailid#gmail.com", "mypassword");
client.Host = "smtp.gmail.com";
client.Port = 587;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.Send(msg);
}
Also please show your app.config file, if you have mail settings there.
As of May 30, 2022 less secure apps are no longer supported from Google so you have to use App Passwords.
https://support.google.com/accounts/answer/6010255?authuser=1&hl=en-GB&authuser=1&visit_id=637957424028050444-425688120&p=less-secure-apps&rd=1
Here are the steps to set up an app password via google:
https://support.google.com/accounts/answer/185833?authuser=1
Then you need to use the 16 character app password for the smtpClient's credentials:
smtpClient = new SmtpClient(emailHost)
{
Port = port,
DeliveryMethod = SmtpDeliveryMethod.Network,
Credentials = new NetworkCredential(fromEmail, emailPassword),
EnableSsl = true,
};
The emailpassword should be the 16 character generated App Password.
Port: 587
Emailhost: smtp.gmail.com
Then the rest of the code:
var mailMessage = new MailMessage{
From = new MailAddress(fromEmail),
Subject = "Yoursubject",
Body = $"Your body",
IsBodyHtml = true,
};
mailMessage.To.Add(newEmail);
if (smtpClient != null)
smtpClient.Send(mailMessage);
Turn on less secure app from this link and boom...
try to enable allow less secure app access.
Here, you can enable less secure app after login with your Gmail.
https://myaccount.google.com/lesssecureapps
Thanks.
For security reasons, Google has discontinued turning on Access for Less Secure Apps, effective from May 30, 2021. Hence, some of the answers here that emphasized enabling access for less secure apps have become obsolete.
Here is an answer I found on VB Forum and it worked for me. I was able to send a mail successfully.
"Please do following steps.
In Google Account Activate 2-step verification.
Select App Password in Google Account => Security => Signing to Google.
In Select App Combo Select Other and Name as Windows App & Click Generate it.
Copy Password and use it in place of email password.
It will work."
Check out the link to see more answers.
https://www.vbforums.com/showthread.php?895413-Sending-Email-via-Gmail-changing-for-May-30
Scroll down and see the answer posted by microbrain
See the code with which I sent my mail below:
Dim emailTo As String = TxtEmail.Text.Trim()
If emailTo.Length > 10 Then
Try
Dim Smtp_Server As New SmtpClient
Dim e_mail As New MailMessage()
Smtp_Server.UseDefaultCredentials = False
Smtp_Server.Credentials = New Net.NetworkCredential("myemail#gmail.com", "***16-digit-code***")
Smtp_Server.Port = 587
Smtp_Server.EnableSsl = True
Smtp_Server.Host = "smtp.gmail.com"
e_mail = New MailMessage()
e_mail.From = New MailAddress("myemailaddress#gmail.com")
e_mail.To.Add(emailTo)
e_mail.Subject = "Login OTP"
e_mail.IsBodyHtml = False
e_mail.Body = "some text here"
Smtp_Server.Send(e_mail)
MessageBox.Show("Your login OTP has been sent to " & emailTo)
LblOTPSuccess.Visible = True
TxtOTP.Visible = True
BtnVerifyOTP.Visible = True
TxtOTP.Focus()
Catch error_t As Exception
MessageBox.Show(error_t.ToString, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
MessageBox.Show("Email address is invalid or too short", "Invalid Email", MessageBoxButtons.OK, MessageBoxIcon.Error)
End If
Remember to change the parameters in the code to suit you.
I encountered the same problem even I set "UseDefaultCredentials" to false. Later I found that the root cause is that I turned on "2-step Verification" in my account. After I turned it off, the problem is gone.
Make sure that Access less secure app is allowed.
MailMessage mail = new MailMessage();
mail.From = new MailAddress("xx#gmail.com");
mail.Sender = new MailAddress("xx#gmail.com");
mail.To.Add("external#emailaddress");
mail.IsBodyHtml = true;
mail.Subject = "Email Sent";
mail.Body = "Body content from";
SmtpClient smtp = new SmtpClient("smtp.gmail.com", 587);
smtp.UseDefaultCredentials = false;
smtp.Credentials = new System.Net.NetworkCredential("xx#gmail.com", "xx");
smtp.DeliveryMethod = SmtpDeliveryMethod.Network;
smtp.EnableSsl = true;
smtp.Timeout = 30000;
try
{
smtp.Send(mail);
}
catch (SmtpException e)
{
textBox1.Text= e.Message;
}
In my case, I was facing the same issue. After a long research, don't set UseDefaultCredentials value to false. Because default value of UseDefaultCredentials is false.
Another key point is to set network credential just before the client.send(message) statement.
Wrong Code:
SmtpClient client = new SmtpClient();
client.Host = ServerName;
var credentials = new System.Net.NetworkCredential(UserName, Password);
client.Credentials = credentials;
client.Port = Port;
client.EnableSsl = EnableSSL;
client.UseDefaultCredentials = false;
client.Send(message);
Wrong Code:
SmtpClient client = new SmtpClient();
client.Host = ServerName;
var credentials = new System.Net.NetworkCredential(UserName, Password);
client.Credentials = credentials;
client.Port = Port;
client.EnableSsl = EnableSSL;
client.UseDefaultCredentials = true;
client.Send(message);
Correct code
SmtpClient client = new SmtpClient();
client.Host = ServerName;
var credentials = new System.Net.NetworkCredential(UserName, Password);
client.Credentials = credentials;
client.Port = Port;
client.EnableSsl = EnableSSL;
// client.UseDefaultCredentials = true;
client.Send(message);
Correct code
SmtpClient client = new SmtpClient();
client.Host = ServerName;
client.Port = Port;
client.EnableSsl = EnableSSL;
client.UseDefaultCredentials = false;
var credentials = new System.Net.NetworkCredential(UserName, Password);
client.Credentials = credentials;
client.Send(message);
Now its working ok with both corrected codes. So in this case sequence matters.
Cheers!
Below is my code.I also had the same error but the problem was that i gave my password wrong.The below code will work perfectly..try it
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("fromaddress#gmail.com");
mail.To.Add("toaddress1#gmail.com");
mail.To.Add("toaddress2#gmail.com");
mail.Subject = "Password Recovery ";
mail.Body += " <html>";
mail.Body += "<body>";
mail.Body += "<table>";
mail.Body += "<tr>";
mail.Body += "<td>User Name : </td><td> HAi </td>";
mail.Body += "</tr>";
mail.Body += "<tr>";
mail.Body += "<td>Password : </td><td>aaaaaaaaaa</td>";
mail.Body += "</tr>";
mail.Body += "</table>";
mail.Body += "</body>";
mail.Body += "</html>";
mail.IsBodyHtml = true;
SmtpServer.Port = 587;
SmtpServer.Credentials = new System.Net.NetworkCredential("sendfrommailaddress.com", "password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
You can reffer it in Sending mail
If it's a new google account, you have to send an email (the first one) through the regular user interface. After that you can use your application/robot to send messages.
You should consider to specify SMTP configuration data in config file and do not overwrite them in a code - see SMTP configuration data at http://www.systemnetmail.com/faq/4.1.aspx
<system.net>
<mailSettings>
<smtp deliveryMethod="Network" from="admin#example.com">
<network defaultCredentials="false" host="smtp.example.com" port="25" userName="admin#example.com" password="password"/>
</smtp>
</mailSettings>
</system.net>
I have encountered the same problem several times. After enabling less secure app option the problem resolved.
Enable less secure app from here: https://myaccount.google.com/lesssecureapps
hope this will help.
I created a Microsoft 365 Developer subscription (E5) today morning and used it to send a test email using the following settings
using (SmtpClient client = new SmtpClient())
{
client.EnableSsl = true;
client.UseDefaultCredentials = false;
client.Credentials = new NetworkCredential(username, password);
client.Host = "smtp.office365.com";
client.Port = 587;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.Send(msg);
}
It did not work in the beginning, as I kept getting this error message with the exception thrown by this code. Then, I spent about 4+ hours playing with the Microsoft 365 admin centre settings and reading articles to figure out the issue. Ultimately I changed my Microsoft 365 admin centre password and it worked like a charm. So, it is worth to try changing the password when you get this message, before thinking about any advance solution.
Note that the password wasn't invalid for sure as I logged on to my Microsoft 365 account without any issues. however, the password change solved the issue.
After going through each of every proposed solution, I realized the correct answer depends on your current server and email client situation. In my case, I have the MX record pointing to my on-premise outbound server. Also, since I'm using G Suite and not Gmail to send my notification emails, I had to follow this configuration: https://support.google.com/a/answer/2956491?hl=en.
Having said this, I found the right way to make this work, is indeed configuring the SMTP relay service first from my G Suite account:
IPv6 address is the address of the webserver the MX record is pointing at (example: 1234:454:c88a:d8e7:25c0:2a9a:5aa2:104).
Once this is done, use this code to complement the solution:
//Set email provider credentials
SmtpClient smtpClient = new SmtpClient("smtp-relay.gmail.com", "587");
smtpClient.EnableSsl = true;
smtpClient.UseDefaultCredentials = true;
MailAddress from = new MailAddress("username#yourdomain.com", "EmailFromAlias");
MailAddress to = new MailAddress("destination#anydomain.com");
MailMessage = new MailMessage(from, to);
MailMessage.Subject = subject;
MyMailMessage.Body = message;
MyMailMessage.IsBodyHtml = false;
smtpClient.Send(MyMailMessage);
Please, notice that with this method, smtpClient.UseDefaultCredentials = true; and not false as suggested in other solutions. Also, since we use the IPv6 address to connect to the SMTP client, it's not required to specify the user name or password. Therefore, in my opinion, this is a more secure and safe approach.
some smtp servers (secure ones) requires you to supply both username and email, if its gmail then most chances its the 'Less Secure Sign-In' issue you need to address, otherwise you can try:
public static void SendEmail(string address, string subject,
string message, string email, string username, string password,
string smtp, int port)
{
var loginInfo = new NetworkCredential(username, password);
var msg = new MailMessage();
var smtpClient = new SmtpClient(smtp, port);
msg.From = new MailAddress(email);
msg.To.Add(new MailAddress(address));
msg.Subject = subject;
msg.Body = message;
msg.IsBodyHtml = true;
smtpClient.EnableSsl = true;
smtpClient.UseDefaultCredentials = false;
smtpClient.Credentials = loginInfo;
smtpClient.Send(msg);
}
notice that the email from and the username are different unlike some implementation that refers to them as the same.
calling this method can be done like so:
SendEmail("to-mail#gmail.com", "test", "Hi it worked!!",
"from-mail", "from-username", "from-password", "smtp", 587);
If you are in a test environment and do not want to set security settings you have to allow less secure apps via. this link in Gmail.
https://myaccount.google.com/lesssecureapps
I had the same issue, it was resolved by change password to strong password.
If you face this issue with Office 365 account. In Exchange Online, by default, the SMTP Client Authentication will be disabled for all Office 365 mailbox accounts. You have to manually enable SMTP Auth for the problematic account and check the case again. Check the below threads.
https://morgantechspace.com/2021/01/the-smtp-server-requires-a-secure-connection-or-the-client.html
https://learn.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission
I have used the steps in this question and it worked for me.
My issue was that G suite didn't consider my password as strong and after changing it it worked perfectly.
If all mentioned solutions didn't help, try to use this URL - it helped me to unblock email sending at my website
https://g.co/allowaccess
that can be if:
1)the user or pass are wrong
2)not enable SSL
3)less secure app is not enable
4)you have not log in into the server with this mail
5)you have not set client.UseDefaultCredentials = false
Removing the port field worked in my case
After turning less secure option on and trying other solutions, if you are still facing the same problem try to use this overload:
client.Credentials = new NetworkCredential("mymailid", "mypassword");
instead of:
client.Credentials = new NetworkCredential("mymailid", "mypassword", "smtp.gmail.com");
I was also facing the issue like
'The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.0 Authentication Required'
then went through so much internet materials but it didn't helped me fully. How I solved it like
step1:smtp.gmail.com is gmail server so go to your account gmail settings->click on see all settings->Forwarding and IMAP/POP->check pop and imap is enabled ,if not enable it->Save changes.
step2-click on your gmail profile picture->click on Manage your google account->go to security tab->check for Access to less secure apps(this option will be available if you havent opt for two step verification)->by default google will set it as disable, make it enable to use your real gmail password working for sending email.
note:-Enabling gmail access for less secure apps,may be dangerous for you so i dont recommend this
step3:-if your account has two step verification enabled or want to use password other than your gmail Real password using app specific password then try this:-
click on your gmail profile picture->click on Manage your google account->go to security tab->search for APP PASSWORD->select any app name given->select any device name->click on generate->copy the 16-digit password and paste it into your app where you have to enter a gmail password in place of your real gmail password.
I want to send an email from my application and i have written following code for sending mail
MailMessage msg = new MailMessage();
msg.From = new MailAddress("mymailid");
msg.To.Add("receipientid");
msg.Subject = "test";
msg.Body = "Test Content";
msg.Priority = MailPriority.High;
SmtpClient client = new SmtpClient();
client.Credentials = new NetworkCredential("mymailid", "mypassword", "smtp.gmail.com");
client.Host = "smtp.gmail.com";
client.Port = 587;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.EnableSsl = true;
client.UseDefaultCredentials = true;
client.Send(msg);
I am running it on localhost so what mistake i am doing to send it.
When i send button it gives an error like
The SMTP server requires a secure connection or the client was not
authenticated. The server response was: 5.5.1 Authentication
Required.
Code in Web.config file
<appSettings>
<add key="webpages:Version" value="2.0.0.0" />
<add key="webpages:Enabled" value="false" />
<add key="PreserveLoginUrl" value="true" />
<add key="ClientValidationEnabled" value="true" />
<add key="UnobtrusiveJavaScriptEnabled" value="true" />
<add key="smtpServer" value="smtp.gmail.com" />
<add key="EnableSsl" value = "true"/>
<add key="smtpPort" value="587" />
<add key="smtpUser" value="sender#gmail.com" />
<add key="smtpPass" value="mypassword" />
<add key="adminEmail" value="sender#gmail.com" />
</appSettings>
<system.net>
<mailSettings>
<smtp from="sender#gmail.com">
<network host="smtp.gmail.com" password="mypassword" port="587" userName="sender#gmail.com" enableSsl="true"/>
</smtp>
</mailSettings>
</system.net>
what should i do to solve this error and send mail??
I have the same problem.
I have found this solution:
Google may block sign in attempts from some apps or devices that do not use modern security standards. Since these apps and devices are easier to break into, blocking them helps keep your account safer.
Some examples of apps that do not support the latest security standards include:
The Mail app on your iPhone or iPad with iOS 6 or below
The Mail app on your Windows phone preceding the 8.1 release
Some Desktop mail clients like Microsoft Outlook and Mozilla Thunderbird
Therefore, you have to enable Less Secure Sign-In (or Less secure app access) in your google account.
After sign into google account, go to:
https://www.google.com/settings/security/lesssecureapps
or
https://myaccount.google.com/lesssecureapps
In C#, you can use the following code:
using (MailMessage mail = new MailMessage())
{
mail.From = new MailAddress("email#gmail.com");
mail.To.Add("somebody#domain.com");
mail.Subject = "Hello World";
mail.Body = "<h1>Hello</h1>";
mail.IsBodyHtml = true;
mail.Attachments.Add(new Attachment("C:\\file.zip"));
using (SmtpClient smtp = new SmtpClient("smtp.gmail.com", 587))
{
smtp.Credentials = new NetworkCredential("email#gmail.com", "password");
smtp.EnableSsl = true;
smtp.Send(mail);
}
}
First check for gmail's security related issues. You may have enabled double authentication in gmail. Also check your gmail inbox if you are getting any security alerts. In such cases check other answer of #mjb as below
Below is the very general thing that i always check first for such issues
client.UseDefaultCredentials = true;
set it to false.
Note #Joe King's answer - you must set client.UseDefaultCredentials before you set client.Credentials
Ensure you set SmtpClient.Credentials after calling SmtpClient.UseDefaultCredentials = false.
The order is important as setting SmtpClient.UseDefaultCredentials = false will reset SmtpClient.Credentials to null.
I've searched and tried different things for hours.. To summarize, I had to take into consideration the following points:
Use smtp.gmail.com instead of smtp.google.com
Use port 587
Set client.UseDefaultCredentials = false; before setting credentials
Turn on the Access for less secure apps
Set client.EnableSsl = true;
If these steps didn't help, check this answer.
Perhaps, you can find something useful on this System.Net.Mail FAQ too.
App Passwords helped me.
Go to https://myaccount.google.com/security.
Scroll down to "Signing in to Google".
Enable 2-Step Verification.
Add App Password.
Use the generated password in your code.
Try to login in your gmail account. it gets locked if you send emails by using gmail SMTP. I don't know the limit of emails you can send before it gets locked but if you login one time then it works again from code.
make sure your webconfig setting are good.
Try it this way, I just made some light changes:
MailMessage msg = new MailMessage();
msg.From = new MailAddress("mymailid#gmail.com");
msg.To.Add("receipientid#gmail.com");
msg.Subject = "test";
msg.Body = "Test Content";
//msg.Priority = MailPriority.High;
using (SmtpClient client = new SmtpClient())
{
client.EnableSsl = true;
client.UseDefaultCredentials = false;
client.Credentials = new NetworkCredential("mymailid#gmail.com", "mypassword");
client.Host = "smtp.gmail.com";
client.Port = 587;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.Send(msg);
}
Also please show your app.config file, if you have mail settings there.
As of May 30, 2022 less secure apps are no longer supported from Google so you have to use App Passwords.
https://support.google.com/accounts/answer/6010255?authuser=1&hl=en-GB&authuser=1&visit_id=637957424028050444-425688120&p=less-secure-apps&rd=1
Here are the steps to set up an app password via google:
https://support.google.com/accounts/answer/185833?authuser=1
Then you need to use the 16 character app password for the smtpClient's credentials:
smtpClient = new SmtpClient(emailHost)
{
Port = port,
DeliveryMethod = SmtpDeliveryMethod.Network,
Credentials = new NetworkCredential(fromEmail, emailPassword),
EnableSsl = true,
};
The emailpassword should be the 16 character generated App Password.
Port: 587
Emailhost: smtp.gmail.com
Then the rest of the code:
var mailMessage = new MailMessage{
From = new MailAddress(fromEmail),
Subject = "Yoursubject",
Body = $"Your body",
IsBodyHtml = true,
};
mailMessage.To.Add(newEmail);
if (smtpClient != null)
smtpClient.Send(mailMessage);
Turn on less secure app from this link and boom...
try to enable allow less secure app access.
Here, you can enable less secure app after login with your Gmail.
https://myaccount.google.com/lesssecureapps
Thanks.
For security reasons, Google has discontinued turning on Access for Less Secure Apps, effective from May 30, 2021. Hence, some of the answers here that emphasized enabling access for less secure apps have become obsolete.
Here is an answer I found on VB Forum and it worked for me. I was able to send a mail successfully.
"Please do following steps.
In Google Account Activate 2-step verification.
Select App Password in Google Account => Security => Signing to Google.
In Select App Combo Select Other and Name as Windows App & Click Generate it.
Copy Password and use it in place of email password.
It will work."
Check out the link to see more answers.
https://www.vbforums.com/showthread.php?895413-Sending-Email-via-Gmail-changing-for-May-30
Scroll down and see the answer posted by microbrain
See the code with which I sent my mail below:
Dim emailTo As String = TxtEmail.Text.Trim()
If emailTo.Length > 10 Then
Try
Dim Smtp_Server As New SmtpClient
Dim e_mail As New MailMessage()
Smtp_Server.UseDefaultCredentials = False
Smtp_Server.Credentials = New Net.NetworkCredential("myemail#gmail.com", "***16-digit-code***")
Smtp_Server.Port = 587
Smtp_Server.EnableSsl = True
Smtp_Server.Host = "smtp.gmail.com"
e_mail = New MailMessage()
e_mail.From = New MailAddress("myemailaddress#gmail.com")
e_mail.To.Add(emailTo)
e_mail.Subject = "Login OTP"
e_mail.IsBodyHtml = False
e_mail.Body = "some text here"
Smtp_Server.Send(e_mail)
MessageBox.Show("Your login OTP has been sent to " & emailTo)
LblOTPSuccess.Visible = True
TxtOTP.Visible = True
BtnVerifyOTP.Visible = True
TxtOTP.Focus()
Catch error_t As Exception
MessageBox.Show(error_t.ToString, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
MessageBox.Show("Email address is invalid or too short", "Invalid Email", MessageBoxButtons.OK, MessageBoxIcon.Error)
End If
Remember to change the parameters in the code to suit you.
I encountered the same problem even I set "UseDefaultCredentials" to false. Later I found that the root cause is that I turned on "2-step Verification" in my account. After I turned it off, the problem is gone.
Make sure that Access less secure app is allowed.
MailMessage mail = new MailMessage();
mail.From = new MailAddress("xx#gmail.com");
mail.Sender = new MailAddress("xx#gmail.com");
mail.To.Add("external#emailaddress");
mail.IsBodyHtml = true;
mail.Subject = "Email Sent";
mail.Body = "Body content from";
SmtpClient smtp = new SmtpClient("smtp.gmail.com", 587);
smtp.UseDefaultCredentials = false;
smtp.Credentials = new System.Net.NetworkCredential("xx#gmail.com", "xx");
smtp.DeliveryMethod = SmtpDeliveryMethod.Network;
smtp.EnableSsl = true;
smtp.Timeout = 30000;
try
{
smtp.Send(mail);
}
catch (SmtpException e)
{
textBox1.Text= e.Message;
}
In my case, I was facing the same issue. After a long research, don't set UseDefaultCredentials value to false. Because default value of UseDefaultCredentials is false.
Another key point is to set network credential just before the client.send(message) statement.
Wrong Code:
SmtpClient client = new SmtpClient();
client.Host = ServerName;
var credentials = new System.Net.NetworkCredential(UserName, Password);
client.Credentials = credentials;
client.Port = Port;
client.EnableSsl = EnableSSL;
client.UseDefaultCredentials = false;
client.Send(message);
Wrong Code:
SmtpClient client = new SmtpClient();
client.Host = ServerName;
var credentials = new System.Net.NetworkCredential(UserName, Password);
client.Credentials = credentials;
client.Port = Port;
client.EnableSsl = EnableSSL;
client.UseDefaultCredentials = true;
client.Send(message);
Correct code
SmtpClient client = new SmtpClient();
client.Host = ServerName;
var credentials = new System.Net.NetworkCredential(UserName, Password);
client.Credentials = credentials;
client.Port = Port;
client.EnableSsl = EnableSSL;
// client.UseDefaultCredentials = true;
client.Send(message);
Correct code
SmtpClient client = new SmtpClient();
client.Host = ServerName;
client.Port = Port;
client.EnableSsl = EnableSSL;
client.UseDefaultCredentials = false;
var credentials = new System.Net.NetworkCredential(UserName, Password);
client.Credentials = credentials;
client.Send(message);
Now its working ok with both corrected codes. So in this case sequence matters.
Cheers!
Below is my code.I also had the same error but the problem was that i gave my password wrong.The below code will work perfectly..try it
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("fromaddress#gmail.com");
mail.To.Add("toaddress1#gmail.com");
mail.To.Add("toaddress2#gmail.com");
mail.Subject = "Password Recovery ";
mail.Body += " <html>";
mail.Body += "<body>";
mail.Body += "<table>";
mail.Body += "<tr>";
mail.Body += "<td>User Name : </td><td> HAi </td>";
mail.Body += "</tr>";
mail.Body += "<tr>";
mail.Body += "<td>Password : </td><td>aaaaaaaaaa</td>";
mail.Body += "</tr>";
mail.Body += "</table>";
mail.Body += "</body>";
mail.Body += "</html>";
mail.IsBodyHtml = true;
SmtpServer.Port = 587;
SmtpServer.Credentials = new System.Net.NetworkCredential("sendfrommailaddress.com", "password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
You can reffer it in Sending mail
If it's a new google account, you have to send an email (the first one) through the regular user interface. After that you can use your application/robot to send messages.
You should consider to specify SMTP configuration data in config file and do not overwrite them in a code - see SMTP configuration data at http://www.systemnetmail.com/faq/4.1.aspx
<system.net>
<mailSettings>
<smtp deliveryMethod="Network" from="admin#example.com">
<network defaultCredentials="false" host="smtp.example.com" port="25" userName="admin#example.com" password="password"/>
</smtp>
</mailSettings>
</system.net>
I have encountered the same problem several times. After enabling less secure app option the problem resolved.
Enable less secure app from here: https://myaccount.google.com/lesssecureapps
hope this will help.
I created a Microsoft 365 Developer subscription (E5) today morning and used it to send a test email using the following settings
using (SmtpClient client = new SmtpClient())
{
client.EnableSsl = true;
client.UseDefaultCredentials = false;
client.Credentials = new NetworkCredential(username, password);
client.Host = "smtp.office365.com";
client.Port = 587;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.Send(msg);
}
It did not work in the beginning, as I kept getting this error message with the exception thrown by this code. Then, I spent about 4+ hours playing with the Microsoft 365 admin centre settings and reading articles to figure out the issue. Ultimately I changed my Microsoft 365 admin centre password and it worked like a charm. So, it is worth to try changing the password when you get this message, before thinking about any advance solution.
Note that the password wasn't invalid for sure as I logged on to my Microsoft 365 account without any issues. however, the password change solved the issue.
After going through each of every proposed solution, I realized the correct answer depends on your current server and email client situation. In my case, I have the MX record pointing to my on-premise outbound server. Also, since I'm using G Suite and not Gmail to send my notification emails, I had to follow this configuration: https://support.google.com/a/answer/2956491?hl=en.
Having said this, I found the right way to make this work, is indeed configuring the SMTP relay service first from my G Suite account:
IPv6 address is the address of the webserver the MX record is pointing at (example: 1234:454:c88a:d8e7:25c0:2a9a:5aa2:104).
Once this is done, use this code to complement the solution:
//Set email provider credentials
SmtpClient smtpClient = new SmtpClient("smtp-relay.gmail.com", "587");
smtpClient.EnableSsl = true;
smtpClient.UseDefaultCredentials = true;
MailAddress from = new MailAddress("username#yourdomain.com", "EmailFromAlias");
MailAddress to = new MailAddress("destination#anydomain.com");
MailMessage = new MailMessage(from, to);
MailMessage.Subject = subject;
MyMailMessage.Body = message;
MyMailMessage.IsBodyHtml = false;
smtpClient.Send(MyMailMessage);
Please, notice that with this method, smtpClient.UseDefaultCredentials = true; and not false as suggested in other solutions. Also, since we use the IPv6 address to connect to the SMTP client, it's not required to specify the user name or password. Therefore, in my opinion, this is a more secure and safe approach.
some smtp servers (secure ones) requires you to supply both username and email, if its gmail then most chances its the 'Less Secure Sign-In' issue you need to address, otherwise you can try:
public static void SendEmail(string address, string subject,
string message, string email, string username, string password,
string smtp, int port)
{
var loginInfo = new NetworkCredential(username, password);
var msg = new MailMessage();
var smtpClient = new SmtpClient(smtp, port);
msg.From = new MailAddress(email);
msg.To.Add(new MailAddress(address));
msg.Subject = subject;
msg.Body = message;
msg.IsBodyHtml = true;
smtpClient.EnableSsl = true;
smtpClient.UseDefaultCredentials = false;
smtpClient.Credentials = loginInfo;
smtpClient.Send(msg);
}
notice that the email from and the username are different unlike some implementation that refers to them as the same.
calling this method can be done like so:
SendEmail("to-mail#gmail.com", "test", "Hi it worked!!",
"from-mail", "from-username", "from-password", "smtp", 587);
If you are in a test environment and do not want to set security settings you have to allow less secure apps via. this link in Gmail.
https://myaccount.google.com/lesssecureapps
I had the same issue, it was resolved by change password to strong password.
If you face this issue with Office 365 account. In Exchange Online, by default, the SMTP Client Authentication will be disabled for all Office 365 mailbox accounts. You have to manually enable SMTP Auth for the problematic account and check the case again. Check the below threads.
https://morgantechspace.com/2021/01/the-smtp-server-requires-a-secure-connection-or-the-client.html
https://learn.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission
I have used the steps in this question and it worked for me.
My issue was that G suite didn't consider my password as strong and after changing it it worked perfectly.
If all mentioned solutions didn't help, try to use this URL - it helped me to unblock email sending at my website
https://g.co/allowaccess
that can be if:
1)the user or pass are wrong
2)not enable SSL
3)less secure app is not enable
4)you have not log in into the server with this mail
5)you have not set client.UseDefaultCredentials = false
Removing the port field worked in my case
After turning less secure option on and trying other solutions, if you are still facing the same problem try to use this overload:
client.Credentials = new NetworkCredential("mymailid", "mypassword");
instead of:
client.Credentials = new NetworkCredential("mymailid", "mypassword", "smtp.gmail.com");
I was also facing the issue like
'The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.0 Authentication Required'
then went through so much internet materials but it didn't helped me fully. How I solved it like
step1:smtp.gmail.com is gmail server so go to your account gmail settings->click on see all settings->Forwarding and IMAP/POP->check pop and imap is enabled ,if not enable it->Save changes.
step2-click on your gmail profile picture->click on Manage your google account->go to security tab->check for Access to less secure apps(this option will be available if you havent opt for two step verification)->by default google will set it as disable, make it enable to use your real gmail password working for sending email.
note:-Enabling gmail access for less secure apps,may be dangerous for you so i dont recommend this
step3:-if your account has two step verification enabled or want to use password other than your gmail Real password using app specific password then try this:-
click on your gmail profile picture->click on Manage your google account->go to security tab->search for APP PASSWORD->select any app name given->select any device name->click on generate->copy the 16-digit password and paste it into your app where you have to enter a gmail password in place of your real gmail password.
I've written several programs that send email from C#. This works great in winXP, but I find it breaks in Win7. My understanding is that even though the SMTP server I'm referencing is on another computer, the sending computer needs to have the SMTP service installed (and win7 does not).
I know its possible to install a third party SMTP server, but then I'd need to do that on every computer running my programs. Instead, I'd like to include a temporary SMTP server in my project that I can use entirely from code to do the same job. Does anyone know of a library (or sample code) on how I can include a temporary SMTP server in my project?
Here is my code:
public static void sendEmail(String[] recipients, String sender, String subject, String body, String[] attachments)
{
MailMessage message;
try
{
message = new MailMessage(sender, recipients[0]);
}
catch (Exception)
{
return;
}
foreach (String s in recipients)
{
if (!message.To.Contains(new MailAddress(s)))
message.To.Add(s);
}
message.From = new MailAddress(sender);
message.Subject = subject;
message.Body = body;
message.IsBodyHtml = true;
SmtpClient smtp = new SmtpClient("PRIVATE.PRIVATE.PRIVATE", 25);
smtp.DeliveryMethod = SmtpDeliveryMethod.PickupDirectoryFromIis;
//smtp.DeliveryMethod = SmtpDeliveryMethod.Network;
smtp.UseDefaultCredentials = true;
if (attachments.Length > 0)
{
foreach (String a in attachments)
{
message.Attachments.Add(new Attachment(a));
}
}
try
{
smtp.SendAsync(message, null);
To send emails from c#, you do not need a local SMTP service. You just need the System.Net.Mail library. Using a remote SMTP server (possibly one with valid PTR settings and not one in your network to avoid being regarded as a spammer) should definitely suffice.
It may be a credentials issue. Change SendAsync to Send to see if you are getting any exceptions. Or add a handler for the Async invocation
smtp.SendCompleted += delegate(object s, System.ComponentModel.AsyncCompletedEventArgs e)
{
if (e.Error != null)
{
System.Diagnostics.Trace.TraceError(e.Error.ToString());
}
};
Following changes to your code works for me in Win7
SmtpClient smtp = new SmtpClient("smtp.gmail.com", 587);
//smtp.DeliveryMethod = SmtpDeliveryMethod.PickupDirectoryFromIis;
smtp.DeliveryMethod = SmtpDeliveryMethod.Network;
smtp.Credentials = new NetworkCredential(GoogleUserEmail, GooglePassword);
smtp.EnableSsl = true;
// smtp.UseDefaultCredentials = true;
if (attachments != null && attachments.Length > 0)
{
foreach (String a in attachments)
{
message.Attachments.Add(new Attachment(a));
}
}
try
{
smtp.Send(message);
}
I have never found an embeddable SMTP server, but both of these are close and you could probably modify them to fit your needs.
http://www.codeproject.com/KB/IP/smtppop3mailserver.aspx
http://www.ericdaugherty.com/dev/cses/developers.html
I'm going to keep looking because this is also something I'd find useful. I'll post more if I find any.
If you just use an unconfigured service to send your emails you will definitely end up in the SPAM folder due to reverse DNS and SPF checks failing. So you'll want to configure your server properly. Alternatively you can use a 3rd party service like Elastic Email. Here is Elastic Email's sample code which uses HTTP to send the mail:
public static string SendEmail(string to, string subject, string bodyText, string bodyHtml, string from, string fromName)
{
WebClient client = new WebClient();
NameValueCollection values = new NameValueCollection();
values.Add("username", USERNAME);
values.Add("api_key", API_KEY);
values.Add("from", from);
values.Add("from_name", fromName);
values.Add("subject", subject);
if (bodyHtml != null)
values.Add("body_html", bodyHtml);
if (bodyText != null)
values.Add("body_text", bodyText);
values.Add("to", to);
byte[] response = client.UploadValues("https://api.elasticemail.com/mailer/send", values);
return Encoding.UTF8.GetString(response);
}
Have you tried specifying SMTP settings in an App.config file? Something like:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.net>
<mailSettings>
<smtp deliveryMethod="Network">
<specifiedPickupDirectory pickupDirectoryLocation="C:\tmp"/>
<network host="smtp.example.com"/>
</smtp>
</mailSettings>
</system.net>
</configuration>
If you change deliveryMethod="SpecifiedPickupDirectory" then it'll just write a file representing the email that would be sent to the directory you specify.
I see different versions of the constructor, one uses info from web.config, one specifies the host, and one the host and port. But how do I set the username and password to something different from the web.config? We have the issue where our internal smtp is blocked by some high security clients and we want to use their smtp server, is there a way to do this from the code instead of web.config?
In this case how would I use the web.config credentials if none is available from the database, for example?
public static void CreateTestMessage1(string server, int port)
{
string to = "jane#contoso.com";
string from = "ben#contoso.com";
string subject = "Using the new SMTP client.";
string body = #"Using this new feature, you can send an e-mail message from an application very easily.";
MailMessage message = new MailMessage(from, to, subject, body);
SmtpClient client = new SmtpClient(server, port);
// Credentials are necessary if the server requires the client
// to authenticate before it will send e-mail on the client's behalf.
client.Credentials = CredentialCache.DefaultNetworkCredentials;
try {
client.Send(message);
}
catch (Exception ex) {
Console.WriteLine("Exception caught in CreateTestMessage1(): {0}",
ex.ToString());
}
}
The SmtpClient can be used by code:
SmtpClient mailer = new SmtpClient();
mailer.Host = "mail.youroutgoingsmtpserver.com";
mailer.Credentials = new System.Net.NetworkCredential("yourusername", "yourpassword");
Use NetworkCredential
Yep, just add these two lines to your code.
var credentials = new System.Net.NetworkCredential("username", "password");
client.Credentials = credentials;
SmtpClient MyMail = new SmtpClient();
MailMessage MyMsg = new MailMessage();
MyMail.Host = "mail.eraygan.com";
MyMsg.Priority = MailPriority.High;
MyMsg.To.Add(new MailAddress(Mail));
MyMsg.Subject = Subject;
MyMsg.SubjectEncoding = Encoding.UTF8;
MyMsg.IsBodyHtml = true;
MyMsg.From = new MailAddress("username", "displayname");
MyMsg.BodyEncoding = Encoding.UTF8;
MyMsg.Body = Body;
MyMail.UseDefaultCredentials = false;
NetworkCredential MyCredentials = new NetworkCredential("username", "password");
MyMail.Credentials = MyCredentials;
MyMail.Send(MyMsg);
There are a couple of things not mentioned in other answers.
First, it can be necessary to use CredentialCache instead of NetworkCredential directly, in order to specify different authentication schemes.
In the documentation, the SMTP authentication type names are listed as:
"NTLM", "Digest", "Kerberos", and "Negotiate"
However I had to breakpoint within the .NET code to see that the value being passed for "AUTH LOGIN" was actually "login". This seems to happen automatically anyway, so this is only necessary to use different schemes.
Second, though no one here is, you probably do NOT want to specify a domain name in your NetworkCredential. Doing so results in SmtpClient passing a username of the form example.com\username which is almost guaranteed to not be accepted by a mail server. (And if your mail server is loose with its authentication requirements, you may not know that you are failing to authenticate.)
var nc = new NetworkCredential(
username,
password
// no domain!
);
// only if you need to specify a particular authentication scheme,
// though it doesn't hurt to do this anyway if you use the right scheme name
var cache = new CredentialCache();
cache.Add(smtpServerName, port, "NTLM", nc);
// can add more credentials for different combinations of server, port, and scheme
smtpClient.Credentials = cache;
Lastly, note that you do not need to set UseDefaultCredentials if you are also setting Credentials as they are both based on the same underlying value. Setting both can lead to issues since they will just overwrite each other.
If in doubt, use WireShark and disable SSL temporarily (to see the network frames or else they are encrypted), and confirm that your SMTP authentication is working. (Use an "smtp" filter in WireShark).
Since not all of my clients use authenticated SMTP accounts, I resorted to using the SMTP account only if app key values are supplied in web.config file.
Here is the VB code:
sSMTPUser = ConfigurationManager.AppSettings("SMTPUser")
sSMTPPassword = ConfigurationManager.AppSettings("SMTPPassword")
If sSMTPUser.Trim.Length > 0 AndAlso sSMTPPassword.Trim.Length > 0 Then
NetClient.Credentials = New System.Net.NetworkCredential(sSMTPUser, sSMTPPassword)
sUsingCredentialMesg = "(Using Authenticated Account) " 'used for logging purposes
End If
NetClient.Send(Message)
I have a standard Google Apps account. I have setup a custom domain through Google Apps. I am able to send and receive emails successfully through Google Apps when I use the Gmail interface. However, I want to send an email via code. In order to attempt this, I have been trying the following code:
MailMessage mailMessage = new MailMessage();
mailMessage.To.Add("someone#somewhere.example");
mailMessage.Subject = "Test";
mailMessage.Body = "<html><body>This is a test</body></html>";
mailMessage.IsBodyHtml = true;
// Create the credentials to login to the gmail account associated with my custom domain
string sendEmailsFrom = "emailAddress#mydomain.example";
string sendEmailsFromPassword = "password";
NetworkCredential cred = new NetworkCredential(sendEmailsFrom, sendEmailsFromPassword);
SmtpClient mailClient = new SmtpClient("smtp.gmail.com", 587);
mailClient.EnableSsl = true;
mailClient.DeliveryMethod = SmtpDeliveryMethod.Network;
mailClient.UseDefaultCredentials = false;
mailClient.Timeout = 20000;
mailClient.Credentials = cred;
mailClient.Send(mailMessage);
When the Send method is reached, an Exception is thrown that states:
"The SMTP server requires a secure
connection or the client was not
authenticated. The server response
was: 5.5.1 Authentication Required."
How do I send emails through my custom domain via Google?
There is no need to hardcode all SMTP settings in your code. Put them in web.config instead. This way you can encrypt these settings if needed and change them on the fly without recompiling your application.
<configuration>
<system.net>
<mailSettings>
<smtp from="example#domain.example" deliveryMethod="Network">
<network host="smtp.gmail.com" port="587"
userName="example#domain.example" password="password"/>
</smtp>
</mailSettings>
</system.net>
</configuration>
End when you send email just enable SSL on your SmtpClient:
var message = new MailMessage("navin#php.net");
// here is an important part:
message.From = new MailAddress("example#domain.example", "Mailer");
// it's superfluous part here since from address is defined in .config file
// in my example. But since you don't use .config file, you will need it.
var client = new SmtpClient();
client.EnableSsl = true;
client.Send(message);
Make sure that you're sending email from the same email address with which you're trying to authenticate at Gmail.
Note: Starting with .NET 4.0 you can insert enableSsl="true" into web.config as opposed to setting it in code.
This is what I use in WPF 4
SmtpClient client = new SmtpClient();
client.Credentials = new NetworkCredential("sender_email#domain.tld", "P#$$w0rD");
client.Port = 587;
client.Host = "smtp.gmail.com";
client.EnableSsl = true;
try
{
MailAddress maFrom = new MailAddress("sender_email#domain.tld", "Sender's Name", Encoding.UTF8),
MailAddress maTo = new MailAddress("recipient_email#domain2.tld", "Recipient's Name", Encoding.UTF8);
MailMessage mmsg = new MailMessage(maFrom, maTo);
mmsg.Body = "<html><body><h1>Some HTML Text for Test as BODY</h1></body></html>";
mmsg.BodyEncoding = Encoding.UTF8;
mmsg.IsBodyHtml = true;
mmsg.Subject = "Some Other Text as Subject";
mmsg.SubjectEncoding = Encoding.UTF8;
client.Send(mmsg);
MessageBox.Show("Done");
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString(), ex.Message);
//throw;
}
Watch for Firewalls and Anti-Viruses. These creepy things tend to block applications sending email.
I use McAfee Enterprise and I have to add the executable name (like Bazar.* for both Bazar.exe and Bazar.vshost.exe) to be able to send emails...
change the port to 465
There is not need to do anything. Just login in your current account first time and follow instructions.
Your problem will resolve. It occur because you had created the account in google apps but did not login. Just login and follow the instructions and try.
My code is connecting to smtp.google.com using TLS on Port=587 (SSL should be port 465) but still needs EnableSsl=true
SmtpClient smtp = new SmtpClient();
smtp.Host = "smtp.gmail.com";
smtp.Port = 587;
smtp.EnableSsl = true;
smtp.UseDefaultCredentials = false;
NetworkCredential credentials = new NetworkCredential();
credentials.UserName = "INSERT EMAIL";
credentials.Password = "INSERT PASSWORD";
smtp.Credentials = credentials;
MailAddress addressFrom = new MailAddress(credentials.UserName);
MailAddress addressTo = new MailAddress("INSERT RECIPIENT");
MailMessage msg = new MailMessage(addressFrom, addressTo);
msg.Subject = "SUBJECT"
msg.Body = "BODY";
smtp.Send(msg);
Notice these important prerequisites on your G SUITE account
Ensure that the username you use has cleared the CAPTCHA word verification test that appears when you first sign in.
Ensure that the account has a secure password - https://support.google.com/accounts/answer/32040
Make sure that Less secure apps is enabled for the desired account- https://support.google.com/a/answer/6260879