I know that this is not a good practice, but I would like to simulate a mouse click event on a textbox, or a window in my wpf application.
I need this, because I am calling this application with some kind of interceptor and the window doesn't get the full focus, it is in front, textbox has a focus but u can't directlly type on textbox.
on window load I call these methods
this.Activate();
this.Topmost = true;
TextBox1.Focus();
Keyboard.Focus(TextBox1);
Thank you.
I had the same issue in VB. i just wanted the focus in the SpinEdit1 (or any control) when the form load. Here is:
private void formX_Load(object sender, EventArgs e)
{
this.ActiveControl = SpinEdit1;
}
Related
I just started working on C# with Visual Studio & Windows Forms Applications. I was trying to create a Calculator and I was wondering if I could change the cursor type on a button which is disabled, I can't figure out how to do it, please help me thank you!
Edit: here's the code I tried to do, it only works if the button's enabled...
private void txt_current_operation_MouseHover(object sender,EventArgs e) {
txt_current_operation.Cursor=Cursors.Hand;
}
Hack Answer
Assuming the Button is contained by the Form, you can handle the MouseMove event of the Form and change the cursor from there:
private void Form1_MouseMove(object sender, MouseEventArgs e)
{
Rectangle rc = txt_current_operation.RectangleToScreen(txt_current_operation.ClientRectangle);
this.Cursor = rc.Contains(Cursor.Position) ? Cursors.Hand : Cursors.Default;
}
If the Button was contained by a Panel, or some other container besides the Form, then you'd change to the MouseMove event of that container instead.
Demonstration:
I have a WindowForm and some controls on it.
My point is that when I click button "?" on top-right of the datagridview, it will show a picture box and when I click outside the pictureBox, it must invisible.
My MainForm
MyPictureBox
I have searched some topics on this site, but some dont work, some work partly. Like
this.
I also tried:
void pictureBox1_LostFocus(object sender, EventArgs e)
{
if (pictureBox1.Visible)
pictureBox1.Visible = false;
}
But when I click on button2, button3, ... The pictureBox wasn't invisible.
Any solution will be highly appreciated.
I think your pictureBox1 isn't losing focus, cause it never actually GOT focused. Set it to be focused after making it visible.
Oh, I have encountered this before...
I was making a Label that you could double click and it would allow you to edit the Label.Text, like a TextBox. However, I was having problems hooking into the events to know when the user had clicked off the Control and wished to stop editing. I tried Control.LostFocus, and Control.Leave, but nothing. I even got frustrated/desperate and tried some silly ones like Control.Invalidated.
What I ended up having to do was subscribe to the Click event of the Form/Container/Control behind it.
However, putting the responsibility of wiring up this event into the Form that wants to use it is poor design. What you can do, however is to make the constructor to Control class require a reference to the owner/parent/container as a parameter. That way, the requirements are not hidden, they must be satisfied before you can get a object instance, and the control can wired up to the Form.Click within itself, where that logic belongs.
private Form owner;
public EditLabel(Form Owner)
{
this.owner = Owner;
owner.Click += EndEditing;
}
Add this method in designer.cs:
pictureBoxEvent this.MouseLeave += new EventHandler(pictureBox_MouseLeave);
Add this code in cs file:
private void pictureBox_MouseLeave(object sender, EventArgs e)
{
pictureBox1.Visible = false;
}
I'm creating form application on c# . I have dragged a textbox with some text in it.
private void textBox1_Click(object sender, EventArgs e)
{
}
Now what is the event for the onlick on textBox1 ?
I need to add this on that function textBox1.Clear();
P.S I searched everywhere. But all i can find is jquery and javascripts... No c#.
EDIT
I tried onfocus like below..but its not working
private void textBox1_OnFocus(object sender, EventArgs e)
{
MessageBox.Show("dsd");
}
If you want to do something when the control is clicked the handle the Click event, not the TextChanged event. Presumably you just double-clicked the control in the designer. That will only handle the default event. To handle other events, open the Properties window, click the Events button at the top and then double-click the appropriate event.
That said, is Click really appropriate? What if the user enters the TextBox using the Tab key? If what you actually want to do is act when the control gets focus then you should handle the Enter event.
You can handle OnFocus/GotGocus event in the TextBox, and clear the text in the textbox.
Hope this helps.
I have another issue in converting my Winforms program to a WPF program. In my first program, I had a smaller window open to allow the user to adjust some data, and then when it closed, the other form was activated again with the new data.
I used form2.ShowDialog(); to open the form, which automatically makes the parent form deactivated in Winforms. This way when I closed form2, the parent form was activated, and I was able to use an event handler form1_Activated to reload and re-initialize some of the settings successfully.
However, now when I attempt to do the same thing with WPF, I am still able to open form2 using form2.ShowDialog();, but then when I close the form, it does not register the form1_Activated event handler. Instead, in order to reload the settings, I must click on another window, and then come back into my program to register the form1_Activated event handler.
Am I just doing something wrong, or is there another event handler that I should be using in WPF to achieve the same thing I was able to do in Winforms?
Calling ShowDialog() causes the dialog box top appear in modal mode so I don't understand why you would need an event handler to process the results after the dialog box is closed. Keep in mind that you can access public variables in the DialogBox, as well. If I understand your question, this should do what you are asking:
MainWindow:
My_DialogBox dlg = new My_DialogBox();
dlg.Owner = this;
dlg.MyPublicVariable = ''; //some value that you might need to pass to the dialog
dlg.ShowDialog(); //exection of MainWindow is suspended until dialog box is closed
if (dlg.DialogResult == true)
{
//dlg.MyPublicVariable is still accessible
//call whatever routines you need in order to refresh the main form's data
}
DialogBox:
private void OK_Button_Click(object sender, RoutedEventArgs e)
{
MyPublic variable = something; //accessible after the dialog has closed.
this.DialogResult = true;
}
private void Cancel_Button_Click(object sender, RoutedEventArgs e)
{
this.DialogResult = false;
}
The MSDN write-up on dialog boxes is pretty good. There may be some tips that might help you even more:
http://msdn.microsoft.com/en-us/library/aa969773.aspx
Good luck!
I have a ToolStripButton that performs an action. The user clicks the button and the button is disabled to prevent the action being performed twice. After the action is complete the button is re-enabled. It all works perfectly...except:
Because the button is disabled it does not fire the "MouseLeave" event and as a result the appearance of the button is not updated. To be absolutely clear, when the mouse enters a ToolStripButton the button is highlighted in orange (by default) with a black box around it. This highlight is not being removed when I re-enable the button. The mouse cursor is, by this time, long gone from the control. Mousing over the button naturally fixes the button by redrawing it.
What I would like to do would be some method on the ToolStripButton that "resets" its appearance. Such a method may even exist on the ToolStrip, but despite searching I have been unable to find anything like this.
As an alternative I could fire the "Mouse Leave" event on the button directly. As far as I know there is no way to easily do this in C# .NET.
Any advice at this point in time would be most appreciated, naturally I don't want to tear up my application and replace the tool strip.
Update:
I reproduced your problem, trying figuring out!
I didn't get a better way other than reset the style in the click event
private void toolStripButton1_Click(object sender, EventArgs e)
{
toolStripButton1.BackColor = Color.FromKnownColor(KnownColor.Control);
toolStripButton1.Enabled = false;
}
private void toolStripButton1_MouseEnter(object sender, EventArgs e)
{
toolStripButton1.BackColor = Color.Red;
}
private void toolStripButton1_MouseLeave(object sender, EventArgs e)
{
toolStripButton1.BackColor = Color.FromKnownColor(KnownColor.Control);
}
Hope this helps!
Have you tried Control.Invalidate()?
from MSDN: Invalidates the entire surface of the control and causes the control to be redrawn.
I had the same problem. I "fixed" it by hiding and then showing back the ToolStripButton using the Visible property after the task was complete.
Before disabling ToolStrip or ToolStripItem:
private void RemoveHighlightFromToolStrip(ToolStrip toolStrip)
{
foreach (ToolStripItem item in toolStrip.Items)
{
if (item.Pressed || item.Selected)
{
item.Visible = false;
item.Visible = true;
}
}
}
also you can just hide and show entire ToolStrip, but this may affect other controls in your form (i.e. if you have some docked DataGridView it would be redrawn)