I've got a simple web API that registers on one route. At the moment I've got two because only one of them does what I need.
My application only has one controller and one Post method in that Controller. I've registered a single Route which always returns a 405 (method not allowed)
The two routes are configured in the RouteConfig.cs:
routes.MapHttpRoute(
name: "app-events",
routeTemplate: "events",
defaults: new { controller = "Events" },
handler: new GZipToJsonHandler(GlobalConfiguration.Configuration),
constraints: null
);
routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional }
);
The Controller method is essentially this...
public class EventsController : ApiController
{
public EventsController()
{
_sender = new EventHubSender();
}
public async Task<HttpResponseMessage> Post(HttpRequestMessage requestMessage)
{
// doing fun stuff here…
return new HttpResponseMessage(HttpStatusCode.OK);
}
}
If I only configure the first route and post a request to http://devbox/events I will get a 405. However, if I add the second, default, route, and post to http://devbox/api/events I get back my expected 201.
With both routes configured at the same time, the same pattern, the route explicitly bound to the Controller receives a post request and fails with a 405, but the other URL will work.
I've spent a long time looking around before conceding to ask the question. Most things I read have a lot to do with Webdav and I think I've followed every one of them to fix the issue. I am not very experienced with this stack, so nothing is very obvious to me.
You mentioned RouteConfig File. This is used for configuring the MVC routes not Web API routes.
So it would appear you are configuring the wrong file which would explain why the api/... path works as it is probably mapping to the default configuration in WebApiConfig.Register, which would look like
public static class WebApiConfig {
public static void Register(HttpConfiguration config) {
// Convention-based routing.
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional }
);
}
}
You would need to update that file with the other desired route
public static class WebApiConfig {
public static void Register(HttpConfiguration config) {
// Convention-based routing.
config.Routes.MapHttpRoute(
name: "app-events",
routeTemplate: "events",
defaults: new { controller = "Events" },
handler: new GZipToJsonHandler(GlobalConfiguration.Configuration),
constraints: null
);
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional }
);
}
}
Web API routes are usually registered before MVC routes which explains why it was not working with your original configuration.
You should also adorn the action with the respective Http{Verb} attribute.
In this case HttpPost so that the route table knows how to handle POST requests that match the route template.
[HttpPost]
public async Task<IHttpActionResult> Post() {
var requestMessage = this.Request;
// async doing fun stuff here….
return OK();
}
I have two action methods in my Products controller. This is my RouteConfig.
config.MapHttpAttributeRoutes();
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{action}/{id}",
defaults: new { id = RouteParameter.Optional }
);
These are the two actions and their working urls.
[HttpGet]
//uri:http://localhost:49964/api/products/product?strKey=1
public IHttpActionResult Product(string strKey)
[HttpPost]
//uri:http://localhost:49964/api/products/product
public IHttpActionResult Product([FromBody] Product product)
But I also want to use the below url for GET.
http://localhost:49964/api/products/product/1
But web api responds with,
The requested resource does not support http method 'GET'.
Change strKey to id or do the reverse if you want to keep strKey.
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{action}/{strKey}",
defaults: new { strKey = RouteParameter.Optional }
);
The route template needs to match up to the action for mapping to work as intended.
//GET api/products/product/1
//GET api/products/product?strKey=1
[HttpGet]
public IHttpActionResult Product(string strKey)
this would however mean that all actions in this route would optionally use strKey as a placeholder
Hi Guys i am new with web api routes and i have this issue where my call will pick up the more generic one over the specific one.
The ajax call i have is
$.getJSON("/api/solutions/GetSolutionByCategory/" + categoryId,
function (data) {//..some other functions}
Within the solutions controller there are 2 methods
[HttpGet]
public IHttpActionResult GetSolutionByCategory(int cateogryId)
{
List<Solution> solutions = _context.Solutions.Where(s => s.CategoryId == cateogryId).ToList();
return Ok(solutions.Select(Mapper.Map<Solution, SolutionDto>));
}
[HttpGet]
public IHttpActionResult GetSolutions()
{
return Ok(_context.Solutions.ToList().Select(Mapper.Map<Solution, SolutionDto>));
}
And then i have the following 3 routes
config.Routes.MapHttpRoute(
name: "WithAction",
routeTemplate: "api/{controller}/GetIssuesByFlag/{flag}",
defaults: new {flag = 3}
);
config.Routes.MapHttpRoute(
name: "SolutionByCategory",
routeTemplate: "api/{controller}/GetSolutionByCategory/{categoryId}",
defaults: new {categoryId = -1}
);
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new {id = RouteParameter.Optional}
);
What happens is that my ajax call will ignore the 2nd one that is the one i want it to hit and goes to the 3rd one there for instead of calling the GetSolutionsByCategory it hits the generic GetSolutions
What am i doing wrong here?
There is a typo in your action parameter name, its int cateogryId instead of int categoryId - public IHttpActionResult GetSolutionByCategory(int categoryId).
However, I would suggest you to go for attribute routing instead of adding lots of route configurations. Enable attribute routing in your web api config class - config.MapHttpAttributeRoutes(); and in your controller:
[RoutePrefix("api")]
public class SolutionsController:ApiController
{
[HttpGet]
[Route("GetSolutionByCategory/{categoryId})"]
public IHttpActionResult GetSolutionByCategory(int categoryId)
{
....
}
[HttpGet]
[Route("GetSolutions")]
public IHttpActionResult GetSolutions()
{
...
}
}
Using Attribute routing we can have same controller with multiple get and post methods. We need to add the routing on the action methods.
We can provide the constraints as well with attribute routing.
I keep getting this error when I try to have 2 "Get" methods
Multiple actions were found that match the request: webapi
I been looking around at the other similar questions about this on stack but I don't get it.
I have 2 different names and using the "HttpGet" attribute
[HttpGet]
public HttpResponseMessage Summary(MyVm vm)
{
return null;
}
[HttpGet]
public HttpResponseMessage FullDetails()
{
return null;
}
Your route map is probably something like this in WebApiConfig.cs:
routes.MapHttpRoute(
name: "API Default",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional });
But in order to have multiple actions with the same http method you need to provide webapi with more information via the route like so:
routes.MapHttpRoute(
name: "API Default",
routeTemplate: "api/{controller}/{action}/{id}",
defaults: new { id = RouteParameter.Optional });
Notice that the routeTemplate now includes an action. Lots more info here: http://www.asp.net/web-api/overview/web-api-routing-and-actions/routing-in-aspnet-web-api
Update:
Alright, now that I think I understand what you are after here is another take at this:
Perhaps you don't need the action url parameter and should describe the contents that you are after in another way. Since you are saying that the methods are returning data from the same entity then just let the parameters do the describing for you.
For example your two methods could be turned into:
public HttpResponseMessage Get()
{
return null;
}
public HttpResponseMessage Get(MyVm vm)
{
return null;
}
What kind of data are you passing in the MyVm object? If you are able to just pass variables through the URI, I would suggest going that route. Otherwise, you'll need to send the object in the body of the request and that isn't very HTTP of you when doing a GET (it works though, just use [FromBody] infront of MyVm).
Hopefully this illustrates that you can have multiple GET methods in a single controller without using the action name or even the [HttpGet] attribute.
Update as of Web API 2.
With this API config in your WebApiConfig.cs file:
public static void Register(HttpConfiguration config)
{
//// Web API routes
config.MapHttpAttributeRoutes(); //Don't miss this
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = System.Web.Http.RouteParameter.Optional }
);
}
You can route our controller like this:
[Route("api/ControllerName/Summary")]
[HttpGet]
public HttpResponseMessage Summary(MyVm vm)
{
return null;
}
[Route("api/ControllerName/FullDetails")]
[HttpGet]
public HttpResponseMessage FullDetails()
{
return null;
}
Where ControllerName is the name of your controller (without "controller"). This will allow you to get each action with the route detailed above.
For further reading: http://www.asp.net/web-api/overview/web-api-routing-and-actions/attribute-routing-in-web-api-2
In Web API (by default) methods are chosen based on a combination of HTTP method and route values.
MyVm looks like a complex object, read by formatter from the body so you have two identical methods in terms of route data (since neither of them has any parameters from the route) - which makes it impossible for the dispatcher (IHttpActionSelector) to match the appropriate one.
You need to differ them by either querystring or route parameter to resolve ambiguity.
After a lot of searching the web and trying to find the most suitable form for routing map
if have found the following
config.Routes.MapHttpRoute("DefaultApiWithId", "Api/{controller}/{id}", new { id =RouteParameter.Optional }, new { id = #"\d+" });
config.Routes.MapHttpRoute("DefaultApiWithAction", "Api/{controller}/{action}");
These mapping applying to both action name mapping and basic http convention (GET,POST,PUT,DELETE)
This is the answer for everyone who knows everything is correct and has checked 50 times.....
Make sure you are not repeatedly looking at RouteConfig.cs.
The file you want to edit is named WebApiConfig.cs
Also, it should probably look exactly like this:
using System.Web.Http;
namespace My.Epic.Website
{
public static class WebApiConfig
{
public static void Register(HttpConfiguration config)
{
config.MapHttpAttributeRoutes();
// api/Country/WithStates
config.Routes.MapHttpRoute(
name: "ControllerAndActionOnly",
routeTemplate: "api/{controller}/{action}",
defaults: new { },
constraints: new { action = #"^[a-zA-Z]+([\s][a-zA-Z]+)*$" });
config.Routes.MapHttpRoute(
name: "DefaultActionApi",
routeTemplate: "api/{controller}/{action}/{id}",
defaults: new { id = RouteParameter.Optional }
);
}
}
}
I could have saved myself about 3 hours.
It might be possible that your webmethods are being resolved to the same url. Have a look at the following link :-
http://www.asp.net/web-api/overview/web-api-routing-and-actions/routing-in-aspnet-web-api
So, you might need to add your methodname to your routing table.
Without using actions the options would be:
move one of the methods to a different controller, so that they don't clash.
use just one method that takes the param, and if it's null call the other method from your code.
This solution worked for me.
Please place Route2 first in WebApiConfig. Also Add HttpGet and HttpPost before each method and include controller name and method name in the url.
WebApiConfig =>
config.Routes.MapHttpRoute(
name: "MapByAction",
routeTemplate: "api/{controller}/{action}/{id}", defaults: new { id = RouteParameter.Optional });
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional });
Controller =>
public class ValuesController : ApiController
{
[HttpPost]
public string GetCustomer([FromBody] RequestModel req)
{
return "Customer";
}
[HttpPost]
public string GetCustomerList([FromBody] RequestModel req)
{
return "Customer List";
}
}
Url =>
http://localhost:7050/api/Values/GetCustomer
http://localhost:7050/api/Values/GetCustomerList
I found that that when I have two Get methods, one parameterless and one with a complex type as a parameter that I got the same error. I solved this by adding a dummy parameter of type int, named Id, as my first parameter, followed by my complex type parameter. I then added the complex type parameter to the route template. The following worked for me.
First get:
public IEnumerable<SearchItem> Get()
{
...
}
Second get:
public IEnumerable<SearchItem> Get(int id, [FromUri] List<string> layers)
{
...
}
WebApiConfig:
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}/{layers}",
defaults: new { id = RouteParameter.Optional, layers RouteParameter.Optional }
);
It is possible due to using MVC controller instead of Web API controller.
Check the namespace in Web API controller it should be as following
using System.Net;
using System.Net.Http;
using System.Web.Http;
If the namespace are as following then it is give above error in web api controller method calling
using System.Web;
using System.Web.Mvc;
Please check you have two methods which has the different name and same parameters.
If so please delete any of the method and try.
I've stumbled upon this problem while trying to augment my WebAPI controllers with extra actions.
Assume you would have
public IEnumerable<string> Get()
{
return this.Repository.GetAll();
}
[HttpGet]
public void ReSeed()
{
// Your custom action here
}
There are now two methods that satisfy the request for /api/controller which triggers the problem described by TS.
I didn't want to add "dummy" parameters to my additional actions so I looked into default actions and came up with:
[ActionName("builtin")]
public IEnumerable<string> Get()
{
return this.Repository.GetAll();
}
for the first method in combination with the "dual" route binding:
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { action = "builtin", id = RouteParameter.Optional },
constraints: new { id = #"\d+" });
config.Routes.MapHttpRoute(
name: "CustomActionApi",
routeTemplate: "api/{controller}/{action}");
Note that even though there is no "action" parameter in the first route template apparently you can still configure a default action allowing us to separate the routing of the "normal" WebAPI calls and the calls to the extra action.
In my Case Everything was right
1) Web Config was configured properly
2) Route prefix and Route attributes were proper
Still i was getting the error. In my Case "Route" attribute (by pressing F12) was point to System.Web.MVc but not System.Web.Http which caused the issue.
You can add [Route("api/[controller]/[action]")] to your controller class.
[Route("api/[controller]/[action]")]
[ApiController]
public class MySuperController : ControllerBase
{
...
}
I know it is an old question, but sometimes, when you use service resources like from AngularJS to connect to WebAPI, make sure you are using the correct route, other wise this error happens.
Make sure you do NOT decorate your Controller methods for the default GET|PUT|POST|DELETE actions with [HttpPost/Put/Get/Delete] attribute. I had added this attibute to my vanilla Post controller action and it caused a 404.
Hope this helps someone as it can be very frustrating and bring progress to a halt.
For example => TestController
[HttpGet]
public string TestMethod(int arg0)
{
return "";
}
[HttpGet]
public string TestMethod2(string arg0)
{
return "";
}
[HttpGet]
public string TestMethod3(int arg0,string arg1)
{
return "";
}
If you can only change WebApiConfig.cs file.
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{action}/",
defaults: null
);
Thats it :)
And Result :
Have you tried like:
[HttpGet("Summary")]
public HttpResponseMessage Summary(MyVm vm)
{
return null;
}
[HttpGet("FullDetails")]
public HttpResponseMessage FullDetails()
{
return null;
}
On a side-project I am working on, I am creating a RESTful API using WebAPI 2.2. The thing I'm working on is a means of accessing settings for a game. An example of the kind of routes I am trying to accomplish are as follows:
http://x/api/GameSettings/ <-- Returns all settings
http://x/api/GameSettings/audio <-- Returns the 'audio' category
http://x/api/GameSettings/audio/volume <-- Returns the key 'volume' in category audio
Note: the examples are all Get requests.
I've implemented the following controller...
public class GameSettingsController : ApiController
{
// GET /api/GameSettings
public HttpResponseMessage Get()
{
// Magic
return Request.CreateResponse(HttpStatusCode.OK, model);
}
public HttpResponseMessage Get(string category)
{
// Similar.
}
public HttpResponseMessage Get(string category, string key)
{
// Slightly different, but still similar.
}
}
I bound up the following MVC routes:
// Only necessary for the main view...
routes.MapRoute(
name: "Default",
url: "{controller}/{action}",
defaults: new { controller = "Home", action = "Index" }
);
And, I bound up the following WebAPI routes:
config.MapHttpAttributeRoutes();
config.Routes.MapHttpRoute(
name: "ApiGeneralCommand",
routeTemplate: "api/{controller}",
defaults: new { controller = "GameSettings" }
);
config.Routes.MapHttpRoute(
name: "ApiCategoryCommands",
routeTemplate: "api/{controller}/{category})",
defaults: new { controller = "GameSettings" }
);
config.Routes.MapHttpRoute(
name: "ApiKeyCommands",
routeTemplate: "api/{controller}/{category}/{key}",
defaults: new { controller = "GameSettings", category = "master" },
constraints: new { key = "[a-z0-9.-]" }
);
...And finally, my Global.asax configuration is set up like so:
protected void Application_Start()
{
GlobalConfiguration.Configure(WebApiConfig.Register);
RouteConfig.RegisterRoutes(RouteTable.Routes);
BundleConfig.RegisterBundles(BundleTable.Bundles);
}
...But one small problem.
When I navigate to http://x/api/GameSettings/audio, I get a 404 error. It's as if the category argument in the request isn't being properly associated to the Get(string category) method on my controller. This leads me to believe my routes are wrong or I'm missing something.
As a sanity check, I tested the route using a non-RESTful syntax, http://x/api/GameSettings?category=audio, which hit a breakpoint and yielded a result. This only reaffirms my theory that the WebAPI routing is off.
As an additional sanity check, I tested http://x/api/GameSettings/ and not only hit a breakpoint set in that function, but returned the expected result.
Question: What is my routing missing, that will allow http://x/api/GameSettings/audio to work like http://x/api/GameSettings?category=audio? I haven't worked with a RESTful API in a while, so I'm sure I'm missing something really dumb.
I would try to use the attribute routing. I believe that should work well for your scenario.
[RoutePrefix("api/GameSettings")]
public class GameSettingsController
{
// GET /api/GameSettings
[HttpGet]
public HttpResponseMessage Get()
{
// Magic
return Request.CreateResponse(HttpStatusCode.OK, model);
}
[Route("{category}")]
[HttpGet]
public HttpResponseMessage Get(string category)
{
// Similar.
}
[Route("{category}/{key}")]
[HttpGet]
public HttpResponseMessage Get(string category, string key)
{
// Slightly different, but still similar.
}
}
I would remove the stuff that you have added to the config.
Hope this helps.
Change the order and try.Because ASP.NET realizes that you have three routes. It will check the top-most route first and if your data can be placed in that route it will not check any more routes.
config.MapHttpAttributeRoutes();
config.Routes.MapHttpRoute(
name: "ApiKeyCommands",
routeTemplate: "api/{controller}/{category}/{key}",
defaults: new { controller = "GameSettings", category = "master" },
constraints: new { key = "[a-z0-9.-]" }
);
config.Routes.MapHttpRoute(
name: "ApiCategoryCommands",
routeTemplate: "api/{controller}/{category})",
defaults: new { controller = "GameSettings" }
);
config.Routes.MapHttpRoute(
name: "ApiGeneralCommand",
routeTemplate: "api/{controller}",
defaults: new { controller = "GameSettings" }
);