I'm testing a simple LINQ select query and want to get two DateTime values from the table, but I'm doing something wrong here and need to know what I'm doing/thinking wrong?
My query:
var test = from x in db.Projects where x.ID == 1 select x;
Then I try to get on of the values like this:
DateTime Date = test. ?????
Here I thought I should get a suggestion from the Intellisense after the dot to pick the value from the column StartDate the table, but this isn't working.
If you need multiple matches...
Are you sure that you have multiple Project objects that have the same ID of 1 which your query currently suggests? If that is the case, then your query should return all of the records that meet that constraint via the Where() method :
// Get your Projects that meet your criteria
var test = db.Projects.Where(p => p.ID == 1);
If you need to access properties from these elements, you could either loop through them explicitly :
// Iterate through each match that was found
foreach(var t in test)
{
// Access your properties here
DateTime dt = t.YourDateProperty;
}
Or you could accomplish this using a Select() statement to only pull the properties that you need :
// This will return a collection of Dates mapped from each element in your collection
var testDates = db.Projects.Where(p => p.ID == 1)
.Select(x => x.YourDateProperty);
If you only need a single match...
If you only need to match a single element within your collection, you might consider using the First(), Single() or their equivalent FirstOrDefault() and SingleOrDefault() methods, which will return a single entity that you can use as expected :
// This will return the first Project with an ID of 1
var test = db.Project.FirstOrDefault(p => p.ID == 1);
// If it was successful
if(test != null)
{
// Then you can safely access it here
DateTime dt = test.YourDateProperty;
}
The only difference between the methods mentioned (normal vs OrDefault()) is that the OrDefault() methods will return null if no matching elements are found, so they generally require a null check as seen above.
test is going to be an enumeration (IEnumerable<>, IQueryable<>, etc... many are applicable) of your Project type. So if, for example, you want the first record, you might do this:
DateTime Date = test.First().SomeDateProperty;
All of the data returned from your query is in test. It could be zero records, one record, many records, etc.
In test you will have a collection which matches the condition x.ID == 1. You should iterate through that collection and take your needed properties.
Edit
I suggest you to use the syntax:
var result = db.Projects.FirstOrDefault(x => x.ID ==1);
this is such as:
var date = test.FirstOrDefault();
DateTime? Date = date != null ? date.StartDate : null;
Related
Just some details. Get Records is a variable where it contains the results of my stored procedure. Now, what I want to ask is what if I want to remove the group by function but I still want to get the key and items? Is there a way to do it?
var sortResCinema = GetRecords.Where(x => test2.branch == x.Bbranch && test.movieName == x.MovieName && x.MovieName != null)
.GroupBy(x => x.MovieName,
(key, elements) =>
new
{
Id = key,
Items = elements.ToList()
}).ToList();
There's no need for GroupBy here since you are looking for a specific movieName.
I guess you wanted something like this:
var sortResCinema = GetRecords.Where(x => test2.branch == x.Bbranch && test.movieName == x.MovieName).ToList();
You can replace the GroupBy with a Select. The Select statement can be used to alter the type of the results returned, which is what you appear to want to do. Should work with exactly the same syntax as the second parameter. So replace "GroupBy" with "Select" and remove the first argument. The key and elements properties that are being used in the GroupBy statement are internal to that function so you'd need to work out what function you want to replace these by, for instance the key might be x.MovieName.
I am trying to fetch an option using the SingleOrDefault Linq to SQL method.
var po = repository.Context.AsQueryable<Option>().SingleOrDefault(o => o.Option.Id == sp.Options // sp.Options is a collection);
The problem is that inside the SingleOrDefault method I am comparing p.Option.Id == a collection. What I want is to select the option from sp.Options that matches the o.Option.Id. How can I do that?
UPDATE:
One thing I should have mentioned that the sp.Options is a different class than the Option class. sp.Options is SPOptions class so I cannot pass it inside the contains method.
Take a look at Contains.
repository.Context.AsQueryable<Option>().SingleOrDefault(o => sp.Options.Contains(o.Option.Id));
If Options is not a collection of the class of Option.Id, you can use the Any method with your comparison logic in it as follow :
repository.Context.AsQueryable<Option>().SingleOrDefault(o => sp.Options.Any(opts => opts.Something == o.Option.Id));
Search using Contains (sp.Options.Contains(o.Option.Id)) like:
var po = repository.Context.AsQueryable<Option>()
.SingleOrDefault(o => sp.Options.Contains(o.Option.Id));
If members of sp.Options are different from Id then you can do:
var po = repository.Context.AsQueryable<Option>()
.SingleOrDefault(o => sp.Options.Any(r=> r.Id == o.Option.Id));
or
var po = repository.Context.AsQueryable<Option>()
.SingleOrDefault(o => sp.Options.Select(r=> r.Id).Contains(o.Option.Id));
Assuming Id is the field in sp.Options elements that you want to compare with.
Based on your question it seems you're expecting to have a single match between those two option sets, correct ?
If so, I'd suggest you to write it as:
var po = repository.Context.AsQueryable().Where(o => sp.Options.Any(item=>item.id == o.Option.Id)).SingleOrDefault();
I am using Linq and to check whether or not a record exists in the database and that it is the latest version. I can do this using Linq
bool query = db.foo.Any(x => x.Id == list.Id);
And then checking to see if this produced a true or false result.
The issue I have with this approach is that if I want to check all the attributes of the table to determine if the existing data differs from the new copy then it requires me to specify a mapping for each attribute and list item.
Is there a way I can iterate through or are there other alternatives available?
x refers to the Entity framework object that is representing the DB
list is a list that is mapped 1 to 1 to the Entity Framework object.
foo query = db.foo.Where(x => x.Id == list.Id).FirstOrDefault();
if(query != null)
{
properties = query.GetType().GetProperties();
foreach(PropertyInfo prop in properties)
{
if (list.GetType().GetProperty(prop.Name) != null)
{
var val1 = list.GetType().GetProperty(prop.Name).GetValue(list);
var val2 = prop.GetType().GetProperty(prop.Name).GetValue(prop);
// do your checking here
}
}
}
If I understand you correctly, you want a sort of for each loop to iterate over all the columns for a row, and check that they match the corresponding data from the list - is that correct?
The short answer is: Sorry, I don't think you can do that (at least not without using some reflection tricks, which might be rather messy, and will not perform as well as you probably want).
With SQL you can write: SELECT * FROM table (...), but there is no such option in Linq; you need to specify the names of each column explicitly.
What you could and probably should do instead, is what Jon Skeet mentioned briefly in a comment: Add a version number, or possibly a timestamp that you can check. Write your logic in such a way that you can be certain that if the version is correct/updated, then the row is valid.
You can then check the validity of a specific row by looking at it's version number. You could for instance do something like this:
// Does a row with specified ID exist and the newest version exist:
bool isRowValid = db.foo.Any(x => x.Id == list.Id &&
x.VersionNr == list.newestVersionNr);
bool chechExists = db.foo.Exists(x => x.Id == list.Id);
This will return bool as you wanted
I want to query my item in table Items, where the last update of each item must be less than 91 days old (from last update till now) and the quantity > 0.
This is my code in the Model:
public IList<Item> GetAllProducts()
{
var ien_item = from i in this.DataContext.Items
orderby i.LastUpdated descending
select i;
return ien_item.ToList().Where(
s =>
HelperClasses.HelperClass.IsLastUpdate(s.LastUpdated.Value) == true
&&
(s => s.Quantity) > 0
)
.ToList();
}
Anyone can solve it? Thanks.
We don't really know what's not working here. EDIT: Merlyn spotted it; your lambda syntax is messed up. There's more to do here though.
However, I'd have thought you'd want this:
public IList<Item> GetAllProducts()
{
var lastUpdateLimit = DateTime.UtcNow.Date.AddDays(-91);
var query = from item in DataContext.Items
where item.Quantity > 0 && item.LastUpdated >= lastUpdateLimit
orderby item.LastUpdated descending
select item;
return query.ToList();
}
Note that this is able to do all the querying at the database side instead of fetching all the items and filtering at the client side. It does assume that HelperClasses.HelperClass.IsLastUpdate is simple though, and basically equivalent to the filter I've got above.
(One additional point to note is that by evaluating UtcNow.Date once, the result will be consistent for all items - whereas if your code evaluates "today" on every call to IsLastUpdate, some values in the query may end up being filtered against a different date to other values, due to time progressing while the query is evaluating.)
EDIT: If you really need to use HelperClasses.HelperClass.IsLastUpdate then I'd suggest:
public IList<Item> GetAllProducts()
{
var query = from item in DataContext.Items
where item.Quantity > 0
orderby item.LastUpdated descending
select item;
return query.AsEnumerable()
.Where(s => HelperClass.IsLastUpdate(s.LastUpdated.Value))
.ToList();
}
... then at least the quantity filter is performed at the database side, and you're not creating a complete buffered list before you need to (note the single call to ToList).
The problem is your lambda syntax. You're trying to define a second lambda while in the middle of defining a first lambda. While this is possible to do, and useful in some contexts, it is sort of an advanced scenario, and probably won't be useful to you until you know you need it.
Right now, you don't need it. Unless you know you need it, you don't need it :)
So -
Instead of what you've written:
.Where(
s =>
HelperClasses.HelperClass.IsLastUpdate(s.LastUpdated.Value) == true
&& (s => s.Quantity) > 0
)
Write this instead:
.Where(
s =>
HelperClasses.HelperClass.IsLastUpdate(s.LastUpdated.Value) == true
&& s.Quantity > 0 // Notice I got rid of the extra lambda here
)
If you're morbidly curious:
The compile error you got is because you didn't define your second lambda correctly. It redefined a variable you'd already used (s), and you were trying to check if a lambda was greater than zero. That makes no sense. You can only compare the result of a lambda to some value. It's like calling a function. You don't compare functions to numbers - you compare the result you get when calling a function to a number.
Easy ...
public IList<Item> GetAllProducts()
{
var ien_item =
from i in DataContext.Items
where
HelperClasses.HelperClass.IsLastUpdate(i.LastUpdated.Value)
&& s.Quantity > 0
orderby i.LastUpdated descending
select i;
return ien_item.ToList();
}
Linq to SQL: Methods are not allowed (linq is not magic and can not convert C# methods to TSQL)
http://msdn.microsoft.com/en-us/library/bb425822.aspx
Linq to Object: while looking the same, it is much more powerful than linq to SQL... but can not query SQL databases :)
http://msdn.microsoft.com/en-us/library/bb397919.aspx
Linq to XML: same as linq to Object, with xml object
http://msdn.microsoft.com/en-us/library/bb387098.aspx
Linq to Dataset: not the same as Linq to SQL !
http://msdn.microsoft.com/en-us/library/bb386977.aspx
Other linq providers:
http://en.wikipedia.org/wiki/Language_Integrated_Query
What is the best way to assemble a dynamic WHERE clause to a LINQ statement?
I have several dozen checkboxes on a form and am passing them back as: Dictionary<string, List<string>> (Dictionary<fieldName,List<values>>) to my LINQ query.
public IOrderedQueryable<ProductDetail> GetProductList(string productGroupName, string productTypeName, Dictionary<string,List<string>> filterDictionary)
{
var q = from c in db.ProductDetail
where c.ProductGroupName == productGroupName && c.ProductTypeName == productTypeName
// insert dynamic filter here
orderby c.ProductTypeName
select c;
return q;
}
(source: scottgu.com)
You need something like this? Use the Linq Dynamic Query Library (download includes examples).
Check out ScottGu's blog for more examples.
I have similar scenario where I need to add filters based on the user input and I chain the where clause.
Here is the sample code.
var votes = db.Votes.Where(r => r.SurveyID == surveyId);
if (fromDate != null)
{
votes = votes.Where(r => r.VoteDate.Value >= fromDate);
}
if (toDate != null)
{
votes = votes.Where(r => r.VoteDate.Value <= toDate);
}
votes = votes.Take(LimitRows).OrderByDescending(r => r.VoteDate);
You can also use the PredicateBuilder from LinqKit to chain multiple typesafe lambda expressions using Or or And.
http://www.albahari.com/nutshell/predicatebuilder.aspx
A simple Approach can be if your Columns are of Simple Type like String
public static IEnumerable<MyObject> WhereQuery(IEnumerable<MyObject> source, string columnName, string propertyValue)
{
return source.Where(m => { return m.GetType().GetProperty(columnName).GetValue(m, null).ToString().StartsWith(propertyValue); });
}
It seems much simpler and simpler to use the ternary operator to decide dynamically if a condition is included
List productList = new List();
productList =
db.ProductDetail.Where(p => p.ProductDetailID > 0 //Example prop
&& (String.IsNullOrEmpty(iproductGroupName) ? (true):(p.iproductGroupName.Equals(iproductGroupName)) ) //use ternary operator to make the condition dynamic
&& (ID == 0 ? (true) : (p.ID == IDParam))
).ToList();
I came up with a solution that even I can understand... by using the 'Contains' method you can chain as many WHERE's as you like. If the WHERE is an empty string, it's ignored (or evaluated as a select all). Here is my example of joining 2 tables in LINQ, applying multiple where clauses and populating a model class to be returned to the view. (this is a select all).
public ActionResult Index()
{
string AssetGroupCode = "";
string StatusCode = "";
string SearchString = "";
var mdl = from a in _db.Assets
join t in _db.Tags on a.ASSETID equals t.ASSETID
where a.ASSETGROUPCODE.Contains(AssetGroupCode)
&& a.STATUSCODE.Contains(StatusCode)
&& (
a.PO.Contains(SearchString)
|| a.MODEL.Contains(SearchString)
|| a.USERNAME.Contains(SearchString)
|| a.LOCATION.Contains(SearchString)
|| t.TAGNUMBER.Contains(SearchString)
|| t.SERIALNUMBER.Contains(SearchString)
)
select new AssetListView
{
AssetId = a.ASSETID,
TagId = t.TAGID,
PO = a.PO,
Model = a.MODEL,
UserName = a.USERNAME,
Location = a.LOCATION,
Tag = t.TAGNUMBER,
SerialNum = t.SERIALNUMBER
};
return View(mdl);
}
Just to share my idea for this case.
Another approach by solution is:
public IOrderedQueryable GetProductList(string productGroupName, string productTypeName, Dictionary> filterDictionary)
{
return db.ProductDetail
.where
(
p =>
(
(String.IsNullOrEmpty(productGroupName) || c.ProductGroupName.Contains(productGroupName))
&& (String.IsNullOrEmpty(productTypeName) || c.ProductTypeName.Contains(productTypeName))
// Apply similar logic to filterDictionary parameter here !!!
)
);
}
This approach is very flexible and allow with any parameter to be nullable.
You could use the Any() extension method. The following seems to work for me.
XStreamingElement root = new XStreamingElement("Results",
from el in StreamProductItem(file)
where fieldsToSearch.Any(s => el.Element(s) != null && el.Element(s).Value.Contains(searchTerm))
select fieldsToReturn.Select(r => (r == "product") ? el : el.Element(r))
);
Console.WriteLine(root.ToString());
Where 'fieldsToSearch' and 'fieldsToReturn' are both List objects.
This is the solution I came up with if anyone is interested.
https://kellyschronicles.wordpress.com/2017/12/16/dynamic-predicate-for-a-linq-query/
First we identify the single element type we need to use ( Of TRow As DataRow) and then identify the “source” we are using and tie the identifier to that source ((source As TypedTableBase(Of TRow)). Then we must specify the predicate, or the WHERE clause that is going to be passed (predicate As Func(Of TRow, Boolean)) which will either be returned as true or false. Then we identify how we want the returned information ordered (OrderByField As String). Our function will then return a EnumerableRowCollection(Of TRow), our collection of datarows that have met the conditions of our predicate(EnumerableRowCollection(Of TRow)). This is a basic example. Of course you must make sure your order field doesn’t contain nulls, or have handled that situation properly and make sure your column names (if you are using a strongly typed datasource never mind this, it will rename the columns for you) are standard.
System.Linq.Dynamic might help you build LINQ expressions at runtime.
The dynamic query library relies on a simple expression language for formulating expressions and queries in strings.
It provides you with string-based extension methods that you can pass any string expression into instead of using language operators or type-safe lambda extension methods.
It is simple and easy to use and is particularly useful in scenarios where queries are entirely dynamic, and you want to provide an end-user UI to help build them.
Source: Overview in Dynamic LINQ
The library lets you create LINQ expressions from plain strings, therefore, giving you the possibility to dynamically build a LINQ expression concatenating strings as you require.
Here's an example of what can be achieved:
var resultDynamic = context.Customers
.Where("City == #0 and Age > #1", "Paris", 50)
.ToList();