I'm using C# and Entity Framework.
I created the dataset to display data from it:
With only one table(buildings), i created my crystal report very well.
But now, i want to create another one that display:
name_b, Adresse_b,date
the number of appartements of a building
the number of shared_areas of a building
and the name of the user.
I have to write a query in the crystalReportViewer1_Load and set it as datasource or what?
Thank you to help me.
There are a few options -
1. In your current report, group the report by Building, then
create a sub-report containing all of the details (name,
address,etc) and place it into the group footer in the main (outer)
report. Link the report by ID_Building. This will show you all of
the details for each building.
2. In you current report, add all of the tables to the data connection (database expert); then group the report as desired (by building, Apartment, etc).
You can create running totals to get the count of apartments and the number of shared_areas.
Related
I ask for advice what would you suggest to display 2 unrelated tables in a single report (if needed with subreport), the first one with groupings and the second one "flat"?
Details:
I am developing a report with C# 4 and Crystal Reports for Visual studio.
Data comes from a Stored procedure in Sql Server 2005, that returns 2 tables.
I pass the data to the report with the .SetDataSource(Dataset) method and I checked that data in the dataset is correct.
I need to display the data from the first table in a quite complex form with different sections. This part works.
At the end of the report I need to print the data from the second table (no grouping, just a "flat" print). To do this I added a subreport.
The tables are not related. I added a Dummy field on them with the same value and used it to mimic a relation in the database expert; I configured the subreport link, based on the dummy field.
I have 2 problems.
The data in the main report is cross joined with the second table (I could expect that since they are related with a constant field)
The subreport is always empty (I checked several times that its table in datasource contains correct data).
I tried different configurations of link and tried to place the subreport in different sections (It should be in the report footer).
I set a border around the subreport: the border is printed but inside it is empty.
I also setup a formula to count the records of both tables and put the count in the report: the count is > 0 for both.
Your approach looks wrong.... At first if both are not releated I don't see any use in creating a dummy field and linking tables which will always provide cross join. Any way as per your descrition table 1 data is saperately displayed and table 2 data is saperately displayed
As per your description in main report you need data from table 1 and in footer you need data from table 2.
Try this approach:
Don't link tables
take table 1 in main report and show the required display.
Take sub report and in that take only table 2 and display in footer and make sure don't link main report and sub report nor link two tables.
Ideally speaking, without linked table not used in crystal report as reporting tools used to display the relevant data based on our criteria and display 2 different set of data without link does not mean as a report as well as tough to integrate in crystal report.
Tough to integrate means at any point you have to link the table either via union in sqlserver or at crystal report side, other wise it display as Cartesian.
As per my thoughts you can do it by some approach.
Approach 1 : You can get the data by union or unionAll with set of columns and filter the data where table's column does not have null value ie.
http://www.maximumimpactsolutions.co.uk/blog/comments.asp?bd=118
Table1col1 Table1col2 Table1col3 Table2Col1 Table2Col2 Table2Col3
value value value null null null --table1data
null null null value value value --table2data
Approach 2 : Second is sub-report, but still need the linked as you already done. But there is proper rule to be set (this is very very tedious job).
Approach 3 : Generate 2 report at c# side and merge into one PDF, then export it.
check this links.
Reporting on multiple tables independently in Crystal Reports 11
http://www.tek-tips.com/viewthread.cfm?qid=241195
http://www.crystalreportsbook.com/Forum/forum_posts.asp?TID=4756
http://www.codeproject.com/Questions/348959/Crystal-reports-for-multiple-tables
I need to show data on crystal report, my tables are as below
ClientServiceMaster (ServiceNo, ComplainDate, AttainDate, Counter)
ServiceDetail(ServiceNo, Problem, Reason, Action)
ReplacementDetail (ServiceNo, ItemNo, Qty)
Here ClientServiceMaster Data is only once, so I have kept that in Page Header
But there would be more then one records for ServiceDetail as well as ReplacementDetail, I want to show each rows of these both tables.
Kindly Help me in which section I need to add these tables and how to write code
Khilen
You should use sub reports.
You can use separate queries with datasets with the relevant data.
Here are some samples.. Hope you'll find something...
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-subreports.htm
http://www.dotnetspider.com/resources/43691-How-create-sub-reports-crystal-report.aspx
Hi, I'm working on a report which uses reportviewer in VS2010.
It is an invoice report. It has some accounts in the system, for each account, it has some orders. Now, in each month, we need to send the invoice to each account.
In the report, at the top, we need to list "Bill To" (the address for each account) and "Invoice#", for each account, it is different, and it is continouous. Then, at the center, it should list the details of the orders for this account. Obviously, each account should have an invoice.
See the attached screen shot. I used grouping and created the invoice shown in screen shot.
But, it has a problem. The "Account address", "Terms", and "Invoice #", I could not put them in the grouping (those are the same within the group). Thus, for different groups, they are shown as the same values, although in the rdlc file, I put their fields there.
Anyone knows how to solve the problem?
One possibility is: instead of creating the invoice for all accounts in one report (i.e. 20 pages, each page is an invoice for an account), create a report for each invoice for each account (so total 20 files), then print the invoice directly. This will work since we can manipulate all the data, and use reportviewer parameters for Account Address, Terms, ...
However, it means we could not browse the reports before print (withint the software). Any suggestions?
thanks
reader
What you can do is , since for each account there is an address, invoice# and invoice details or orders in your case,
So what you can do is :
EDIT : Let me go in some detailed fashion ! (Please zoom in to see the image details clearly)
1.Create a new report and add a Tablix to it
--Tablix has the property , it can iterate through your data
and create dataset which will get data for Account address, invoice, and Terms. Then :
if you are not able to view the image properly ..here is the same presented for you
This is the way I did my reports with similar requirements...sub-reports would ease the tasks to a much extent ..
p.s:
Edit: No need to go for a Header.. as you say in your subject of question.
jus the main report and a sub-report should do what you need !
I jus saw yours is crystal report.. but the concept is over all the same
I'm still new to C# and reports, and in order to take baby steps, I started with a Crystal Report using one table.
Eventually I figured it out and it worked brilliantly.
Then I added another table to the report. I haven't changed anything in my code. Adding a field from the second table to the report, results in a blank report.
Removing that field again (so no columns form the second table is on the report), the report produces data again.
So I get the impression that the problem is on the report side. But I have included the code anyway:
private void Load_Ord_Rep()
{
using (MySqlConnection conn = new MySqlConnection(OTW.Properties.Settings.Default.wcdbConnectionString))
{
conn.Open();
String sql = "SELECT * FROM wcdb.order_table, wcdb.mat_table WHERE order_no = '13661' and order_table.mat_code = mat_table.mat_code";
using (MySqlCommand cmdSel = new MySqlCommand(sql, conn))
{
DataSet ds = new DataSet();
MySqlDataAdapter da = new MySqlDataAdapter(cmdSel);
da.Fill(ds);
ReportDocument rpt = new ReportDocument();
rpt.Load("C:\\Visual Studio 2008\\Projects\\OTW\\OTW\\CrystalReport3.rpt");
dataView1.Table = ds.Tables[0];
rpt.SetDataSource(dataView1);
crystalReportViewer1.ReportSource = rpt;
crystalReportViewer1.Refresh();
}
conn.Close();
}
}
With further investigation I have come to the conclusion the problem is not the code or the link, but rather the loading of the second table. I did a outer join with the values being equal or greater. Only the first table's results are displayed on the report. So because the second table's values are not read, no join can be established between the two tables and thus no data on the report. Now the question: why is the second table not being read by Crystal Report!?
UPDATE
I removed the second table from the main report and added a sub-report with the data. Same result as before. The sup report shows blank. Running the sup report on its own (as the main report), it populated correctly. I'm using MySQL, could it then maybe be a database issue?
UPDATE
I created a new app, this time connected the report to the database using ODBC (instead of ADO.NET). And it worked perrrfect. Now to figure out why ADO.Net is not working....as my entire program is based on it.
You don't need to do any of the code you are doing with the dataset/dataview. I recommend you allow the report to "pull" data (you are "pushing" data to the report now).
To pull data requires only the following:
ReportDocument rpt = new ReportDocument();
rpt.Load("C:\\Visual Studio 2008\\Projects\\OTW\\OTW\\CrystalReport3.rpt");
rpt.SetDataBaseLogon("userName", "password", "servername", "database");
crystalReportViewer1.ReportSource = rpt;
This reduces the risk that you're confusing the report up by passing in a dataview that it has no idea how to map to the tables you added while designing the report. (Which I'm 99.999% sure is happening now.)
All the code above lacks is parameters if you had any that needed to be set. It looks like you may be trying to "push" data because you wanted to filter on that order number or something? If that is the case, add a 'record selection formula' inside your report, base it's 'where' aspect of that formula on a Crystal Report parameter and add a rpt.SetParameter(arguments) line to the code I provided.
No this is not a licensing constraint, I'm certain of that.
Successful troubleshooting path:
1) Used the simple code to load the report:
* No errors, but no data in the report
2) Played with join options in the report:
* Also resulted in a blank report, even with only one table
* Concerned the second table is not reading data
3) Checked for record filtering by a 'record selection formula' which might limit/prevent rows from being returned
* In this case, wasn't applicable
4) Analyzed how joins were being done:
["It's probably how you are joining. For example: if you do a right outer join to a second table and it has no data, then even the first table's rows won't come back."]
A join was done on the primary id field (mat_code) in the 'orders' table to the same field (mat_code) in the second table, 'material'. This seemed fine.
Attempted a Left Outer join with the link type being ">=". The report printed the first table (orders) with data. But still none of the second tables' (material) data.
Made a new report, this time first adding the "second" table (material) and then the first (orders). This time with an outer join, and only the material table shows data. In other words, it only appears to pull data for the first, or primary table, then stops.
5) Attempted loading the second table's data by putting it into a subreport, and linking the subreport on the same 'mat_code' field:
(Helpful tutorial: http://vb.net-informations.com/crystal-report/vb.net_crystal_report_subreport.htm)
Sub-report also shows blank. Only the main report works. Whatever table exists in the subreport is not being populated.
Still sees no data using the simple suggested code, his original code still shows the first table's data
6) Check for a mismatch between the table's connection and definition, and the actual data structure/contents being submitted to, or loaded by, the report. A specific test was suggested, go to:
i) 'Set Database Location' (where you manage tables for the report)
ii) Look to see if an XML/DataSet was used versus OLEDB was done
iii) Change the database table location to the same tables, but with an OLEDB connection type (repeat for all tables)
When attempting above, when the 'Update' button was hit, the screen just flickered for a split second, but showed no message. After testing the report again, still no change in behavior. He was using ADO.NET to connect to the data.
7) Still highly suspicious of the data table definition and connection type. Suggested the following test:
i) Make a brand new 1 page application with only simple test code.
ii) Make a new report with only the 'orders' and 'materials' tables, using OLEDB from the beginning
iii) Add only the mat_code field from the main table to the report
iv) Add a subreport for 'materials' linked on mat_code
v) Show only mat_code on the subreport
vi) Run the app
If data shows, the problem is either:
Answer 1: A mismatch between the database definition (as was read when the report was FIRST made, and connected via ADO.NET to the tables) and the actual data table/column definitions being found when loading the report later (i.e. Someone edited the 'materials' table to change a column definition, or the number of fields, etc.)
Answer 2: Possible defect in the particular combination of Crystal Reports and Windows drivers required to push ADO.NET data to the report. Using the pull-data model over OLEDB may be working around something issues. Those issues may be addressed with the latest Crystal Reports and/or Windows drivers (i.e. hotfixes or Windows updates, driver packs, etc.)
The test worked fine. Even without making a subreport. The data pulled in just like it was supposed to.
Check the link between the two tables in crystal reports. Are they as what you expect ?
Check it by
Field Explorer> DataBaseFields > (RightClick) DatabaseExpert > (See Tab) Links
I have a table Called EmployeeTypes which hold types of Employees, now i want to create a report using SSRS which will have something like this:
EmployeeType1 EmployeeType2 EmployeeType3
4 23 2
where the numbers are the count of employees.
problem is how can i generate the columns programmatically like that as the EmployeeTypes Table can have many Types and expand by time?
It sounds like you are looking for a cross tab report, using a data set like select count(*), employee_type from employee_table group by employee_type.
You can use the report wizard to create a 'Matrix' report type (as opposed to a 'Tabular' report type). The wizard will guide you through the steps to get what you need.
An SSRS report is defined by an XML file (the .RDL or .RDLC file). You could generate columns programmatically by directly modifying the XML. Not for the faint of heart, but people do it, and it can be done.
Here is a sample:
http://www.codeproject.com/Articles/11254/SQL-Reporting-Services-with-Dynamic-Column-Reports