Related
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 11 years ago.
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
I was curious about how other people use the this keyword. I tend to use it in constructors, but I may also use it throughout the class in other methods. Some examples:
In a constructor:
public Light(Vector v)
{
this.dir = new Vector(v);
}
Elsewhere
public void SomeMethod()
{
Vector vec = new Vector();
double d = (vec * vec) - (this.radius * this.radius);
}
I don't mean this to sound snarky, but it doesn't matter.
Seriously.
Look at the things that are important: your project, your code, your job, your personal life. None of them are going to have their success rest on whether or not you use the "this" keyword to qualify access to fields. The this keyword will not help you ship on time. It's not going to reduce bugs, it's not going to have any appreciable effect on code quality or maintainability. It's not going to get you a raise, or allow you to spend less time at the office.
It's really just a style issue. If you like "this", then use it. If you don't, then don't. If you need it to get correct semantics then use it. The truth is, every programmer has his own unique programing style. That style reflects that particular programmer's notions of what the "most aesthetically pleasing code" should look like. By definition, any other programmer who reads your code is going to have a different programing style. That means there is always going to be something you did that the other guy doesn't like, or would have done differently. At some point some guy is going to read your code and grumble about something.
I wouldn't fret over it. I would just make sure the code is as aesthetically pleasing as possible according to your own tastes. If you ask 10 programmers how to format code, you are going to get about 15 different opinions. A better thing to focus on is how the code is factored. Are things abstracted right? Did I pick meaningful names for things? Is there a lot of code duplication? Are there ways I can simplify stuff? Getting those things right, I think, will have the greatest positive impact on your project, your code, your job, and your life. Coincidentally, it will probably also cause the other guy to grumble the least. If your code works, is easy to read, and is well factored, the other guy isn't going to be scrutinizing how you initialize fields. He's just going to use your code, marvel at it's greatness, and then move on to something else.
There are several usages of this keyword in C#.
To qualify members hidden by similar name
To have an object pass itself as a parameter to other methods
To have an object return itself from a method
To declare indexers
To declare extension methods
To pass parameters between constructors
To internally reassign value type (struct) value.
To invoke an extension method on the current instance
To cast itself to another type
To chain constructors defined in the same class
You can avoid the first usage by not having member and local variables with the same name in scope, for example by following common naming conventions and using properties (Pascal case) instead of fields (camel case) to avoid colliding with local variables (also camel case). In C# 3.0 fields can be converted to properties easily by using auto-implemented properties.
I only use it when absolutely necessary, ie, when another variable is shadowing another. Such as here:
class Vector3
{
float x;
float y;
float z;
public Vector3(float x, float y, float z)
{
this.x = x;
this.y = y;
this.z = z;
}
}
Or as Ryan Fox points out, when you need to pass this as a parameter. (Local variables have precedence over member variables)
Personally, I try to always use this when referring to member variables. It helps clarify the code and make it more readable. Even if there is no ambiguity, someone reading through my code for the first time doesn't know that, but if they see this used consistently, they will know if they are looking at a member variable or not.
I use it every time I refer to an instance variable, even if I don't need to. I think it makes the code more clear.
I can't believe all of the people that say using it always is a "best practice" and such.
Use "this" when there is ambiguity, as in Corey's example or when you need to pass the object as a parameter, as in Ryan's example. There is no reason to use it otherwise because being able to resolve a variable based on the scope chain should be clear enough that qualifying variables with it should be unnecessary.
EDIT: The C# documentation on "this" indicates one more use, besides the two I mentioned, for the "this" keyword - for declaring indexers
EDIT: #Juan: Huh, I don't see any inconsistency in my statements - there are 3 instances when I would use the "this" keyword (as documented in the C# documentation), and those are times when you actually need it. Sticking "this" in front of variables in a constructor when there is no shadowing going on is simply a waste of keystrokes and a waste of my time when reading it, it provides no benefit.
I use it whenever StyleCop tells me to. StyleCop must be obeyed. Oh yes.
Any time you need a reference to the current object.
One particularly handy scenario is when your object is calling a function and wants to pass itself into it.
Example:
void onChange()
{
screen.draw(this);
}
I tend to use it everywhere as well, just to make sure that it is clear that it is instance members that we are dealing with.
I use it anywhere there might be ambiguity (obviously). Not just compiler ambiguity (it would be required in that case), but also ambiguity for someone looking at the code.
Another somewhat rare use for the this keyword is when you need to invoke an explicit interface implementation from within the implementing class. Here's a contrived example:
class Example : ICloneable
{
private void CallClone()
{
object clone = ((ICloneable)this).Clone();
}
object ICloneable.Clone()
{
throw new NotImplementedException();
}
}
Here's when I use it:
Accessing Private Methods from within the class (to differentiate)
Passing the current object to another method (or as a sender object, in case of an event)
When creating extension methods :D
I don't use this for Private fields because I prefix private field variable names with an underscore (_).
[C++]
I agree with the "use it when you have to" brigade. Decorating code unnecessarily with this isn't a great idea because the compiler won't warn you when you forget to do it. This introduces potential confusion for people expecting this to always be there, i.e. they'll have to think about it.
So, when would you use it? I've just had a look around some random code and found these examples (I'm not passing judgement on whether these are good things to do or otherwise):
Passing "yourself" to a function.
Assigning "yourself" to a pointer or something like that.
Casting, i.e. up/down casting (safe or otherwise), casting away constness, etc.
Compiler enforced disambiguation.
You should always use it, I use it to diferantiate private fields and parameters (because our naming conventions state that we don't use prefixes for member and parameter names (and they are based on information found on the internet, so I consider that a best practice))
I use it when, in a function that accepts a reference to an object of the same type, I want to make it perfectly clear which object I'm referring to, where.
For example
class AABB
{
// ... members
bool intersects( AABB other )
{
return other.left() < this->right() &&
this->left() < other.right() &&
// +y increases going down
other.top() < this->bottom() &&
this->top() < other.bottom() ;
}
} ;
(vs)
class AABB
{
bool intersects( AABB other )
{
return other.left() < right() &&
left() < other.right() &&
// +y increases going down
other.top() < bottom() &&
top() < other.bottom() ;
}
} ;
At a glance which AABB does right() refer to? The this adds a bit of a clarifier.
In Jakub Šturc's answer his #5 about passing data between contructors probably could use a little explanation. This is in overloading constructors and is the one case where use of this is mandatory. In the following example we can call the parameterized constructor from the parameterless constructor with a default parameter.
class MyClass {
private int _x
public MyClass() : this(5) {}
public MyClass(int v) { _x = v;}
}
I've found this to be a particularly useful feature on occasion.
I got in the habit of using it liberally in Visual C++ since doing so would trigger IntelliSense ones I hit the '>' key, and I'm lazy. (and prone to typos)
But I've continued to use it, since I find it handy to see that I'm calling a member function rather than a global function.
I tend to underscore fields with _ so don't really ever need to use this. Also R# tends to refactor them away anyway...
I pretty much only use this when referencing a type property from inside the same type. As another user mentioned, I also underscore local fields so they are noticeable without needing this.
I use it only when required, except for symmetric operations which due to single argument polymorphism have to be put into methods of one side:
boolean sameValue (SomeNum other) {
return this.importantValue == other.importantValue;
}
[C++]
this is used in the assignment operator where most of the time you have to check and prevent strange (unintentional, dangerous, or just a waste of time for the program) things like:
A a;
a = a;
Your assignment operator will be written:
A& A::operator=(const A& a) {
if (this == &a) return *this;
// we know both sides of the = operator are different, do something...
return *this;
}
this on a C++ compiler
The C++ compiler will silently lookup for a symbol if it does not find it immediately. Sometimes, most of the time, it is good:
using the mother class' method if you did not overloaded it in the child class.
promoting a value of a type into another type
But sometimes, You just don't want the compiler to guess. You want the compiler to pick-up the right symbol and not another.
For me, those times are when, within a method, I want to access to a member method or member variable. I just don't want some random symbol picked up just because I wrote printf instead of print. this->printf would not have compiled.
The point is that, with C legacy libraries (§), legacy code written years ago (§§), or whatever could happen in a language where copy/pasting is an obsolete but still active feature, sometimes, telling the compiler to not play wits is a great idea.
These are the reasons I use this.
(§) it's still a kind of mystery to me, but I now wonder if the fact you include the <windows.h> header in your source, is the reason all the legacy C libraries symbols will pollute your global namespace
(§§) realizing that "you need to include a header, but that including this header will break your code because it uses some dumb macro with a generic name" is one of those russian roulette moments of a coder's life
'this.' helps find members on 'this' class with a lot of members (usually due to a deep inheritance chain).
Hitting CTRL+Space doesn't help with this, because it also includes types; where-as 'this.' includes members ONLY.
I usually delete it once I have what I was after: but this is just my style breaking through.
In terms of style, if you are a lone-ranger -- you decide; if you work for a company stick to the company policy (look at the stuff in source control and see what other people are doing). In terms of using it to qualify members, neither is right or wrong. The only wrong thing is inconsistency -- that is the golden rule of style. Leave the nit-picking others. Spend your time pondering real coding problems -- and obviously coding -- instead.
I use it every time I can. I believe it makes the code more readable, and more readable code equals less bugs and more maintainability.
When you are many developers working on the same code base, you need some code guidelines/rules. Where I work we've desided to use 'this' on fields, properties and events.
To me it makes good sense to do it like this, it makes the code easier to read when you differentiate between class-variables and method-variables.
It depends on the coding standard I'm working under. If we are using _ to denote an instance variable then "this" becomes redundant. If we are not using _ then I tend to use this to denote instance variable.
I use it to invoke Intellisense just like JohnMcG, but I'll go back and erase "this->" when I'm done. I follow the Microsoft convention of prefixing member variables with "m_", so leaving it as documentation would just be redundant.
1 - Common Java setter idiom:
public void setFoo(int foo) {
this.foo = foo;
}
2 - When calling a function with this object as a parameter
notifier.addListener(this);
There is one use that has not already been mentioned in C++, and that is not to refer to the own object or disambiguate a member from a received variable.
You can use this to convert a non-dependent name into an argument dependent name inside template classes that inherit from other templates.
template <typename T>
struct base {
void f() {}
};
template <typename T>
struct derived : public base<T>
{
void test() {
//f(); // [1] error
base<T>::f(); // quite verbose if there is more than one argument, but valid
this->f(); // f is now an argument dependent symbol
}
}
Templates are compiled with a two pass mechanism. During the first pass, only non-argument dependent names are resolved and checked, while dependent names are checked only for coherence, without actually substituting the template arguments.
At that step, without actually substituting the type, the compiler has almost no information of what base<T> could be (note that specialization of the base template can turn it into completely different types, even undefined types), so it just assumes that it is a type. At this stage the non-dependent call f that seems just natural to the programmer is a symbol that the compiler must find as a member of derived or in enclosing namespaces --which does not happen in the example-- and it will complain.
The solution is turning the non-dependent name f into a dependent name. This can be done in a couple of ways, by explicitly stating the type where it is implemented (base<T>::f --adding the base<T> makes the symbol dependent on T and the compiler will just assume that it will exist and postpones the actual check for the second pass, after argument substitution.
The second way, much sorter if you inherit from templates that have more than one argument, or long names, is just adding a this-> before the symbol. As the template class you are implementing does depend on an argument (it inherits from base<T>) this-> is argument dependent, and we get the same result: this->f is checked in the second round, after template parameter substitution.
You should not use "this" unless you absolutely must.
There IS a penalty associated with unnecessary verbosity. You should strive for code that is exactly as long as it needs to be, and no longer.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 11 years ago.
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
I was curious about how other people use the this keyword. I tend to use it in constructors, but I may also use it throughout the class in other methods. Some examples:
In a constructor:
public Light(Vector v)
{
this.dir = new Vector(v);
}
Elsewhere
public void SomeMethod()
{
Vector vec = new Vector();
double d = (vec * vec) - (this.radius * this.radius);
}
I don't mean this to sound snarky, but it doesn't matter.
Seriously.
Look at the things that are important: your project, your code, your job, your personal life. None of them are going to have their success rest on whether or not you use the "this" keyword to qualify access to fields. The this keyword will not help you ship on time. It's not going to reduce bugs, it's not going to have any appreciable effect on code quality or maintainability. It's not going to get you a raise, or allow you to spend less time at the office.
It's really just a style issue. If you like "this", then use it. If you don't, then don't. If you need it to get correct semantics then use it. The truth is, every programmer has his own unique programing style. That style reflects that particular programmer's notions of what the "most aesthetically pleasing code" should look like. By definition, any other programmer who reads your code is going to have a different programing style. That means there is always going to be something you did that the other guy doesn't like, or would have done differently. At some point some guy is going to read your code and grumble about something.
I wouldn't fret over it. I would just make sure the code is as aesthetically pleasing as possible according to your own tastes. If you ask 10 programmers how to format code, you are going to get about 15 different opinions. A better thing to focus on is how the code is factored. Are things abstracted right? Did I pick meaningful names for things? Is there a lot of code duplication? Are there ways I can simplify stuff? Getting those things right, I think, will have the greatest positive impact on your project, your code, your job, and your life. Coincidentally, it will probably also cause the other guy to grumble the least. If your code works, is easy to read, and is well factored, the other guy isn't going to be scrutinizing how you initialize fields. He's just going to use your code, marvel at it's greatness, and then move on to something else.
There are several usages of this keyword in C#.
To qualify members hidden by similar name
To have an object pass itself as a parameter to other methods
To have an object return itself from a method
To declare indexers
To declare extension methods
To pass parameters between constructors
To internally reassign value type (struct) value.
To invoke an extension method on the current instance
To cast itself to another type
To chain constructors defined in the same class
You can avoid the first usage by not having member and local variables with the same name in scope, for example by following common naming conventions and using properties (Pascal case) instead of fields (camel case) to avoid colliding with local variables (also camel case). In C# 3.0 fields can be converted to properties easily by using auto-implemented properties.
I only use it when absolutely necessary, ie, when another variable is shadowing another. Such as here:
class Vector3
{
float x;
float y;
float z;
public Vector3(float x, float y, float z)
{
this.x = x;
this.y = y;
this.z = z;
}
}
Or as Ryan Fox points out, when you need to pass this as a parameter. (Local variables have precedence over member variables)
Personally, I try to always use this when referring to member variables. It helps clarify the code and make it more readable. Even if there is no ambiguity, someone reading through my code for the first time doesn't know that, but if they see this used consistently, they will know if they are looking at a member variable or not.
I use it every time I refer to an instance variable, even if I don't need to. I think it makes the code more clear.
I can't believe all of the people that say using it always is a "best practice" and such.
Use "this" when there is ambiguity, as in Corey's example or when you need to pass the object as a parameter, as in Ryan's example. There is no reason to use it otherwise because being able to resolve a variable based on the scope chain should be clear enough that qualifying variables with it should be unnecessary.
EDIT: The C# documentation on "this" indicates one more use, besides the two I mentioned, for the "this" keyword - for declaring indexers
EDIT: #Juan: Huh, I don't see any inconsistency in my statements - there are 3 instances when I would use the "this" keyword (as documented in the C# documentation), and those are times when you actually need it. Sticking "this" in front of variables in a constructor when there is no shadowing going on is simply a waste of keystrokes and a waste of my time when reading it, it provides no benefit.
I use it whenever StyleCop tells me to. StyleCop must be obeyed. Oh yes.
Any time you need a reference to the current object.
One particularly handy scenario is when your object is calling a function and wants to pass itself into it.
Example:
void onChange()
{
screen.draw(this);
}
I tend to use it everywhere as well, just to make sure that it is clear that it is instance members that we are dealing with.
I use it anywhere there might be ambiguity (obviously). Not just compiler ambiguity (it would be required in that case), but also ambiguity for someone looking at the code.
Another somewhat rare use for the this keyword is when you need to invoke an explicit interface implementation from within the implementing class. Here's a contrived example:
class Example : ICloneable
{
private void CallClone()
{
object clone = ((ICloneable)this).Clone();
}
object ICloneable.Clone()
{
throw new NotImplementedException();
}
}
Here's when I use it:
Accessing Private Methods from within the class (to differentiate)
Passing the current object to another method (or as a sender object, in case of an event)
When creating extension methods :D
I don't use this for Private fields because I prefix private field variable names with an underscore (_).
[C++]
I agree with the "use it when you have to" brigade. Decorating code unnecessarily with this isn't a great idea because the compiler won't warn you when you forget to do it. This introduces potential confusion for people expecting this to always be there, i.e. they'll have to think about it.
So, when would you use it? I've just had a look around some random code and found these examples (I'm not passing judgement on whether these are good things to do or otherwise):
Passing "yourself" to a function.
Assigning "yourself" to a pointer or something like that.
Casting, i.e. up/down casting (safe or otherwise), casting away constness, etc.
Compiler enforced disambiguation.
You should always use it, I use it to diferantiate private fields and parameters (because our naming conventions state that we don't use prefixes for member and parameter names (and they are based on information found on the internet, so I consider that a best practice))
I use it when, in a function that accepts a reference to an object of the same type, I want to make it perfectly clear which object I'm referring to, where.
For example
class AABB
{
// ... members
bool intersects( AABB other )
{
return other.left() < this->right() &&
this->left() < other.right() &&
// +y increases going down
other.top() < this->bottom() &&
this->top() < other.bottom() ;
}
} ;
(vs)
class AABB
{
bool intersects( AABB other )
{
return other.left() < right() &&
left() < other.right() &&
// +y increases going down
other.top() < bottom() &&
top() < other.bottom() ;
}
} ;
At a glance which AABB does right() refer to? The this adds a bit of a clarifier.
In Jakub Šturc's answer his #5 about passing data between contructors probably could use a little explanation. This is in overloading constructors and is the one case where use of this is mandatory. In the following example we can call the parameterized constructor from the parameterless constructor with a default parameter.
class MyClass {
private int _x
public MyClass() : this(5) {}
public MyClass(int v) { _x = v;}
}
I've found this to be a particularly useful feature on occasion.
I got in the habit of using it liberally in Visual C++ since doing so would trigger IntelliSense ones I hit the '>' key, and I'm lazy. (and prone to typos)
But I've continued to use it, since I find it handy to see that I'm calling a member function rather than a global function.
I tend to underscore fields with _ so don't really ever need to use this. Also R# tends to refactor them away anyway...
I pretty much only use this when referencing a type property from inside the same type. As another user mentioned, I also underscore local fields so they are noticeable without needing this.
I use it only when required, except for symmetric operations which due to single argument polymorphism have to be put into methods of one side:
boolean sameValue (SomeNum other) {
return this.importantValue == other.importantValue;
}
[C++]
this is used in the assignment operator where most of the time you have to check and prevent strange (unintentional, dangerous, or just a waste of time for the program) things like:
A a;
a = a;
Your assignment operator will be written:
A& A::operator=(const A& a) {
if (this == &a) return *this;
// we know both sides of the = operator are different, do something...
return *this;
}
this on a C++ compiler
The C++ compiler will silently lookup for a symbol if it does not find it immediately. Sometimes, most of the time, it is good:
using the mother class' method if you did not overloaded it in the child class.
promoting a value of a type into another type
But sometimes, You just don't want the compiler to guess. You want the compiler to pick-up the right symbol and not another.
For me, those times are when, within a method, I want to access to a member method or member variable. I just don't want some random symbol picked up just because I wrote printf instead of print. this->printf would not have compiled.
The point is that, with C legacy libraries (§), legacy code written years ago (§§), or whatever could happen in a language where copy/pasting is an obsolete but still active feature, sometimes, telling the compiler to not play wits is a great idea.
These are the reasons I use this.
(§) it's still a kind of mystery to me, but I now wonder if the fact you include the <windows.h> header in your source, is the reason all the legacy C libraries symbols will pollute your global namespace
(§§) realizing that "you need to include a header, but that including this header will break your code because it uses some dumb macro with a generic name" is one of those russian roulette moments of a coder's life
'this.' helps find members on 'this' class with a lot of members (usually due to a deep inheritance chain).
Hitting CTRL+Space doesn't help with this, because it also includes types; where-as 'this.' includes members ONLY.
I usually delete it once I have what I was after: but this is just my style breaking through.
In terms of style, if you are a lone-ranger -- you decide; if you work for a company stick to the company policy (look at the stuff in source control and see what other people are doing). In terms of using it to qualify members, neither is right or wrong. The only wrong thing is inconsistency -- that is the golden rule of style. Leave the nit-picking others. Spend your time pondering real coding problems -- and obviously coding -- instead.
I use it every time I can. I believe it makes the code more readable, and more readable code equals less bugs and more maintainability.
When you are many developers working on the same code base, you need some code guidelines/rules. Where I work we've desided to use 'this' on fields, properties and events.
To me it makes good sense to do it like this, it makes the code easier to read when you differentiate between class-variables and method-variables.
It depends on the coding standard I'm working under. If we are using _ to denote an instance variable then "this" becomes redundant. If we are not using _ then I tend to use this to denote instance variable.
I use it to invoke Intellisense just like JohnMcG, but I'll go back and erase "this->" when I'm done. I follow the Microsoft convention of prefixing member variables with "m_", so leaving it as documentation would just be redundant.
1 - Common Java setter idiom:
public void setFoo(int foo) {
this.foo = foo;
}
2 - When calling a function with this object as a parameter
notifier.addListener(this);
There is one use that has not already been mentioned in C++, and that is not to refer to the own object or disambiguate a member from a received variable.
You can use this to convert a non-dependent name into an argument dependent name inside template classes that inherit from other templates.
template <typename T>
struct base {
void f() {}
};
template <typename T>
struct derived : public base<T>
{
void test() {
//f(); // [1] error
base<T>::f(); // quite verbose if there is more than one argument, but valid
this->f(); // f is now an argument dependent symbol
}
}
Templates are compiled with a two pass mechanism. During the first pass, only non-argument dependent names are resolved and checked, while dependent names are checked only for coherence, without actually substituting the template arguments.
At that step, without actually substituting the type, the compiler has almost no information of what base<T> could be (note that specialization of the base template can turn it into completely different types, even undefined types), so it just assumes that it is a type. At this stage the non-dependent call f that seems just natural to the programmer is a symbol that the compiler must find as a member of derived or in enclosing namespaces --which does not happen in the example-- and it will complain.
The solution is turning the non-dependent name f into a dependent name. This can be done in a couple of ways, by explicitly stating the type where it is implemented (base<T>::f --adding the base<T> makes the symbol dependent on T and the compiler will just assume that it will exist and postpones the actual check for the second pass, after argument substitution.
The second way, much sorter if you inherit from templates that have more than one argument, or long names, is just adding a this-> before the symbol. As the template class you are implementing does depend on an argument (it inherits from base<T>) this-> is argument dependent, and we get the same result: this->f is checked in the second round, after template parameter substitution.
You should not use "this" unless you absolutely must.
There IS a penalty associated with unnecessary verbosity. You should strive for code that is exactly as long as it needs to be, and no longer.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 11 years ago.
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
I was curious about how other people use the this keyword. I tend to use it in constructors, but I may also use it throughout the class in other methods. Some examples:
In a constructor:
public Light(Vector v)
{
this.dir = new Vector(v);
}
Elsewhere
public void SomeMethod()
{
Vector vec = new Vector();
double d = (vec * vec) - (this.radius * this.radius);
}
I don't mean this to sound snarky, but it doesn't matter.
Seriously.
Look at the things that are important: your project, your code, your job, your personal life. None of them are going to have their success rest on whether or not you use the "this" keyword to qualify access to fields. The this keyword will not help you ship on time. It's not going to reduce bugs, it's not going to have any appreciable effect on code quality or maintainability. It's not going to get you a raise, or allow you to spend less time at the office.
It's really just a style issue. If you like "this", then use it. If you don't, then don't. If you need it to get correct semantics then use it. The truth is, every programmer has his own unique programing style. That style reflects that particular programmer's notions of what the "most aesthetically pleasing code" should look like. By definition, any other programmer who reads your code is going to have a different programing style. That means there is always going to be something you did that the other guy doesn't like, or would have done differently. At some point some guy is going to read your code and grumble about something.
I wouldn't fret over it. I would just make sure the code is as aesthetically pleasing as possible according to your own tastes. If you ask 10 programmers how to format code, you are going to get about 15 different opinions. A better thing to focus on is how the code is factored. Are things abstracted right? Did I pick meaningful names for things? Is there a lot of code duplication? Are there ways I can simplify stuff? Getting those things right, I think, will have the greatest positive impact on your project, your code, your job, and your life. Coincidentally, it will probably also cause the other guy to grumble the least. If your code works, is easy to read, and is well factored, the other guy isn't going to be scrutinizing how you initialize fields. He's just going to use your code, marvel at it's greatness, and then move on to something else.
There are several usages of this keyword in C#.
To qualify members hidden by similar name
To have an object pass itself as a parameter to other methods
To have an object return itself from a method
To declare indexers
To declare extension methods
To pass parameters between constructors
To internally reassign value type (struct) value.
To invoke an extension method on the current instance
To cast itself to another type
To chain constructors defined in the same class
You can avoid the first usage by not having member and local variables with the same name in scope, for example by following common naming conventions and using properties (Pascal case) instead of fields (camel case) to avoid colliding with local variables (also camel case). In C# 3.0 fields can be converted to properties easily by using auto-implemented properties.
I only use it when absolutely necessary, ie, when another variable is shadowing another. Such as here:
class Vector3
{
float x;
float y;
float z;
public Vector3(float x, float y, float z)
{
this.x = x;
this.y = y;
this.z = z;
}
}
Or as Ryan Fox points out, when you need to pass this as a parameter. (Local variables have precedence over member variables)
Personally, I try to always use this when referring to member variables. It helps clarify the code and make it more readable. Even if there is no ambiguity, someone reading through my code for the first time doesn't know that, but if they see this used consistently, they will know if they are looking at a member variable or not.
I use it every time I refer to an instance variable, even if I don't need to. I think it makes the code more clear.
I can't believe all of the people that say using it always is a "best practice" and such.
Use "this" when there is ambiguity, as in Corey's example or when you need to pass the object as a parameter, as in Ryan's example. There is no reason to use it otherwise because being able to resolve a variable based on the scope chain should be clear enough that qualifying variables with it should be unnecessary.
EDIT: The C# documentation on "this" indicates one more use, besides the two I mentioned, for the "this" keyword - for declaring indexers
EDIT: #Juan: Huh, I don't see any inconsistency in my statements - there are 3 instances when I would use the "this" keyword (as documented in the C# documentation), and those are times when you actually need it. Sticking "this" in front of variables in a constructor when there is no shadowing going on is simply a waste of keystrokes and a waste of my time when reading it, it provides no benefit.
I use it whenever StyleCop tells me to. StyleCop must be obeyed. Oh yes.
Any time you need a reference to the current object.
One particularly handy scenario is when your object is calling a function and wants to pass itself into it.
Example:
void onChange()
{
screen.draw(this);
}
I tend to use it everywhere as well, just to make sure that it is clear that it is instance members that we are dealing with.
I use it anywhere there might be ambiguity (obviously). Not just compiler ambiguity (it would be required in that case), but also ambiguity for someone looking at the code.
Another somewhat rare use for the this keyword is when you need to invoke an explicit interface implementation from within the implementing class. Here's a contrived example:
class Example : ICloneable
{
private void CallClone()
{
object clone = ((ICloneable)this).Clone();
}
object ICloneable.Clone()
{
throw new NotImplementedException();
}
}
Here's when I use it:
Accessing Private Methods from within the class (to differentiate)
Passing the current object to another method (or as a sender object, in case of an event)
When creating extension methods :D
I don't use this for Private fields because I prefix private field variable names with an underscore (_).
[C++]
I agree with the "use it when you have to" brigade. Decorating code unnecessarily with this isn't a great idea because the compiler won't warn you when you forget to do it. This introduces potential confusion for people expecting this to always be there, i.e. they'll have to think about it.
So, when would you use it? I've just had a look around some random code and found these examples (I'm not passing judgement on whether these are good things to do or otherwise):
Passing "yourself" to a function.
Assigning "yourself" to a pointer or something like that.
Casting, i.e. up/down casting (safe or otherwise), casting away constness, etc.
Compiler enforced disambiguation.
You should always use it, I use it to diferantiate private fields and parameters (because our naming conventions state that we don't use prefixes for member and parameter names (and they are based on information found on the internet, so I consider that a best practice))
I use it when, in a function that accepts a reference to an object of the same type, I want to make it perfectly clear which object I'm referring to, where.
For example
class AABB
{
// ... members
bool intersects( AABB other )
{
return other.left() < this->right() &&
this->left() < other.right() &&
// +y increases going down
other.top() < this->bottom() &&
this->top() < other.bottom() ;
}
} ;
(vs)
class AABB
{
bool intersects( AABB other )
{
return other.left() < right() &&
left() < other.right() &&
// +y increases going down
other.top() < bottom() &&
top() < other.bottom() ;
}
} ;
At a glance which AABB does right() refer to? The this adds a bit of a clarifier.
In Jakub Šturc's answer his #5 about passing data between contructors probably could use a little explanation. This is in overloading constructors and is the one case where use of this is mandatory. In the following example we can call the parameterized constructor from the parameterless constructor with a default parameter.
class MyClass {
private int _x
public MyClass() : this(5) {}
public MyClass(int v) { _x = v;}
}
I've found this to be a particularly useful feature on occasion.
I got in the habit of using it liberally in Visual C++ since doing so would trigger IntelliSense ones I hit the '>' key, and I'm lazy. (and prone to typos)
But I've continued to use it, since I find it handy to see that I'm calling a member function rather than a global function.
I tend to underscore fields with _ so don't really ever need to use this. Also R# tends to refactor them away anyway...
I pretty much only use this when referencing a type property from inside the same type. As another user mentioned, I also underscore local fields so they are noticeable without needing this.
I use it only when required, except for symmetric operations which due to single argument polymorphism have to be put into methods of one side:
boolean sameValue (SomeNum other) {
return this.importantValue == other.importantValue;
}
[C++]
this is used in the assignment operator where most of the time you have to check and prevent strange (unintentional, dangerous, or just a waste of time for the program) things like:
A a;
a = a;
Your assignment operator will be written:
A& A::operator=(const A& a) {
if (this == &a) return *this;
// we know both sides of the = operator are different, do something...
return *this;
}
this on a C++ compiler
The C++ compiler will silently lookup for a symbol if it does not find it immediately. Sometimes, most of the time, it is good:
using the mother class' method if you did not overloaded it in the child class.
promoting a value of a type into another type
But sometimes, You just don't want the compiler to guess. You want the compiler to pick-up the right symbol and not another.
For me, those times are when, within a method, I want to access to a member method or member variable. I just don't want some random symbol picked up just because I wrote printf instead of print. this->printf would not have compiled.
The point is that, with C legacy libraries (§), legacy code written years ago (§§), or whatever could happen in a language where copy/pasting is an obsolete but still active feature, sometimes, telling the compiler to not play wits is a great idea.
These are the reasons I use this.
(§) it's still a kind of mystery to me, but I now wonder if the fact you include the <windows.h> header in your source, is the reason all the legacy C libraries symbols will pollute your global namespace
(§§) realizing that "you need to include a header, but that including this header will break your code because it uses some dumb macro with a generic name" is one of those russian roulette moments of a coder's life
'this.' helps find members on 'this' class with a lot of members (usually due to a deep inheritance chain).
Hitting CTRL+Space doesn't help with this, because it also includes types; where-as 'this.' includes members ONLY.
I usually delete it once I have what I was after: but this is just my style breaking through.
In terms of style, if you are a lone-ranger -- you decide; if you work for a company stick to the company policy (look at the stuff in source control and see what other people are doing). In terms of using it to qualify members, neither is right or wrong. The only wrong thing is inconsistency -- that is the golden rule of style. Leave the nit-picking others. Spend your time pondering real coding problems -- and obviously coding -- instead.
I use it every time I can. I believe it makes the code more readable, and more readable code equals less bugs and more maintainability.
When you are many developers working on the same code base, you need some code guidelines/rules. Where I work we've desided to use 'this' on fields, properties and events.
To me it makes good sense to do it like this, it makes the code easier to read when you differentiate between class-variables and method-variables.
It depends on the coding standard I'm working under. If we are using _ to denote an instance variable then "this" becomes redundant. If we are not using _ then I tend to use this to denote instance variable.
I use it to invoke Intellisense just like JohnMcG, but I'll go back and erase "this->" when I'm done. I follow the Microsoft convention of prefixing member variables with "m_", so leaving it as documentation would just be redundant.
1 - Common Java setter idiom:
public void setFoo(int foo) {
this.foo = foo;
}
2 - When calling a function with this object as a parameter
notifier.addListener(this);
There is one use that has not already been mentioned in C++, and that is not to refer to the own object or disambiguate a member from a received variable.
You can use this to convert a non-dependent name into an argument dependent name inside template classes that inherit from other templates.
template <typename T>
struct base {
void f() {}
};
template <typename T>
struct derived : public base<T>
{
void test() {
//f(); // [1] error
base<T>::f(); // quite verbose if there is more than one argument, but valid
this->f(); // f is now an argument dependent symbol
}
}
Templates are compiled with a two pass mechanism. During the first pass, only non-argument dependent names are resolved and checked, while dependent names are checked only for coherence, without actually substituting the template arguments.
At that step, without actually substituting the type, the compiler has almost no information of what base<T> could be (note that specialization of the base template can turn it into completely different types, even undefined types), so it just assumes that it is a type. At this stage the non-dependent call f that seems just natural to the programmer is a symbol that the compiler must find as a member of derived or in enclosing namespaces --which does not happen in the example-- and it will complain.
The solution is turning the non-dependent name f into a dependent name. This can be done in a couple of ways, by explicitly stating the type where it is implemented (base<T>::f --adding the base<T> makes the symbol dependent on T and the compiler will just assume that it will exist and postpones the actual check for the second pass, after argument substitution.
The second way, much sorter if you inherit from templates that have more than one argument, or long names, is just adding a this-> before the symbol. As the template class you are implementing does depend on an argument (it inherits from base<T>) this-> is argument dependent, and we get the same result: this->f is checked in the second round, after template parameter substitution.
You should not use "this" unless you absolutely must.
There IS a penalty associated with unnecessary verbosity. You should strive for code that is exactly as long as it needs to be, and no longer.
I need to find the minimum between 3 values, and I ended up doing something like this:
Math.Min(Math.Min(val1, val2), val3)
It just seems a little silly to me, because other languages use variadic functions for this. I highly doubt this was an oversight though.
Is there any reason why a simple Min/Max function shoundn't be variadic? Are there performance implications? Is there a variadic version that I didn't notice?
If it is a collection (A subclass of IEnumerable<T>) one could easily use the functions in the System.Linq library
int min = new int[] {2,3,4,8}.Min();
Furthermore, it's easy to implement these methods on your own:
public static class Maths {
public static T Min<T> (params T[] vals) {
return vals.Min();
}
public static T Max<T> (params T[] vals) {
return vals.Max();
}
}
You can call these methods with just simple scalars so Maths.Min(14,25,13,2) would give 2.
These are the generic methods, so there is no need to implement this method for each type of numbers (int,float,...)
I think the basic reason why these methods are not implemented in general is that, every time you call this method, an array (or at least an IList object) should be created. By keeping low-level methods one can avoid the overhead. However, I agree one could add these methods to the Math class to make the life of some programmers easier.
CommuSoft has addressed how to accomplish the equivalent in C#, so I won't retread that part.
To specifically address your question "Why aren't C#'s Math.Min/Max variadic?", two thoughts come to mind.
First, Math.Min (and Math.Max) is not, in fact, a C# language feature, it is a .NET framework library feature. That may seem pedantic, but it is an important distinction. C# does not, in fact, provide any special purpose language feature for determining the minimum or maximum value between two (or more) potential values.
Secondly, as Eric Lippert has pointed out a number of times, language features (and presumably framework features) are not "removed" or actively excluded - all features are unimplemented until someone designs, implements, tests, documents and ships the feature. See here for an example.
Not being a .NET framework developer, I cannot speak to the actual decision process that occurred, but it seems like this is a classic case of a feature that simply never rose to the level of inclusion, similar to the sequence foreach "feature" Eric discusses in the provided link.
I think CommuSoft is providing a robust answer that is at least suited for people searching for something along these lines, and that should be accepted.
With that said, the reason is definitely to avoid the overhead necessary for the less likely use case that people want to compare a group rather than two values.
As pointed about by #arx, using a parametric would be unnecessary overhead for the most used case, but it would also be a lot of unnecessary overhead with regards to the loop that would have to be used internally to go through the array n - 1 times.
I can easily see an argument for having created the method in addition to the basic form, but with LINQ that's just no longer necessary.
class my_class
{
public int add_1(int a, int b) {return a + b;}
public func<int, int, int> add_2 = (a, b) => {return a + b;}
}
add_1 is a function whereas add_2 is a delegate. However in this context delegates can forfill a similar role.
Due to precedent and the design of the language the default choice for C# methods should be functions.
However both approaches have pros and cons so I've produced a list. Are there any more advanteges or disadvantages to either approach?
Advantages to conventional methods.
more conventional
outside users of the function see named parameters - for the add_2 syntax arg_n and a type is generally not enough information.
works better with intellisense - ty Minitech
works with reflection - ty Minitech
works with inheritance - ty Eric Lippert
has a "this" - ty CodeInChaos
lower overheads, speed and memory - ty Minitech and CodeInChaos
don't need to think about public\private in respect to both changing and using the function. - ty CodeInChaos
less dynamic, less is permitted that is not known at compile time - ty CodeInChaos
Advantages to "field of delegate type" methods.
more consistant, not member functions and data members, it's just all just data members.
can outwardly look and behave like a variable.
storing it in a container works well.
multiple classes could use the same function as if it were each ones member function, this would be very generic, concise and have good code reuse.
straightforward to use anywhere, for example as a local function.
presumably works well when passed around with garbage collection.
more dynamic, less must be known at compile time, for example there could be functions that configure the behaviour of objects at run time.
as if encapsulating it's code, can be combined and reworked, msdn.microsoft.com/en-us/library/ms173175%28v=vs.80%29.aspx
outside users of the function see unnamed parameters - sometimes this is helpfull although it would be nice to be able to name them.
can be more compact, in this simple example for example the return could be removed, if there were one parameter the brackets could also be removed.
roll you'r own behaviours like inheritance - ty Eric Lippert
other considerations such as functional, modular, distributed, (code writing, testing or reasoning about code) etc...
Please don't vote to close, thats happened already and it got reopened. It's a valid question even if either you don't think the delegates approach has much practical use given how it conflicts with established coding style or you don't like the advanteges of delegates.
First off, the "high order bit" for me with regards to this design decision would be that I would never do this sort of thing with a public field/method. At the very least I would use a property, and probably not even that.
For private fields, I use this pattern fairly frequently, usually like this:
class C
{
private Func<int, int> ActualFunction = (int y)=>{ ... };
private Func<int, int> Function = ActualFunction.Memoize();
and now I can very easily test the performance characteristics of different memoization strategies without having to change the text of ActualFunction at all.
Another advantage of the "methods are fields of delegate type" strategy is that you can implement code sharing techniques that are different than the ones we've "baked in" to the language. A protected field of delegate type is essentially a virtual method, but more flexible. Derived classes can replace it with whatever they want, and you have emulated a regular virtual method. But you could build custom inheritence mechanisms; if you really like prototype inheritance, for example, you could have a convention that if the field is null, then a method on some prototypical instance is called instead, and so on.
A major disadvantage of the methods-are-fields-of-delegate-type approach is that of course, overloading no longer works. Fields must be unique in name; methods merely must be unique in signature. Also, you don't get generic fields the way that we get generic methods, so method type inference stops working.
The second one, in my opinion, offers absolutely no advantage over the first one. It's much less readable, is probably less efficient (given that Invoke has to be implied) and isn't more concise at all. What's more, if you ever use reflection it won't show up as being a method so if you do that to replace your methods in every class, you might break something that seems like it should work. In Visual Studio, the IntelliSense won't include a description of the method since you can't put XML comments on delegates (at least, not in the same way you would put them on normal methods) and you don't know what they point to anyway, unless it's readonly (but what if the constructor changed it?) and it will show up as a field, not a method, which is confusing.
The only time you should really use lambdas is in methods where closures are required, or when it's offers a significant convenience advantage. Otherwise, you're just decreasing readability (basically the readability of my first paragraph versus the current one) and breaking compatibility with previous versions of C#.
Why you should avoid delegates as methods by default, and what are alternatives:
Learning curve
Using delegates this way will surprise a lot of people. Not everyone can wrap their head around delegates, or why you'd want to swap out functions. There seems to be a learning curve. Once you get past it, delegates seem simple.
Perf and reliability
There's a performance loss to invoking delegates in this manner. This is another reason I would default to traditional method declaration unless it enabled something special in my pattern.
There's also an execution safety issue. Public fields are nullable. If you're passed an instance of a class with a public field you'll have to check that it isn't null before using it. This hurts perf and is kind of lame.
You can work around this by changing all public fields to properties (which is a rule in all .Net coding standards anyhow). Then in the setter throw an ArgumentNullException if someone tries to assign null.
Program design
Even if you can deal with all of this, allowing methods to be mutable at all goes against a lot of the design for static OO and functional programming languages.
In static OO types are always static, and dynamic behavior is enabled through polymorphism. You can know the exact behavior of a type based on its run time type. This is very helpful in debugging an existing program. Allowing your types to be modified at run time harms this.
In both static OO and function programming paradigms, limiting and isolating side-effects is quite helpful, and using fully immutable structures is one of the primary ways to do this. The only point of exposing methods as delegates is to create mutable structures, which has the exact opposite effect.
Alternatives
If you really wanted to go so far as to always use delegates to replace methods, you should be using a language like IronPython or something else built on top of the DLR. Those languages will be tooled and tuned for the paradigm you're trying to implement. Users and maintainers of your code won't be surprised.
That being said, there are uses that justify using delegates as a substitute for methods. You shouldn't consider this option unless you have a compelling reason to do so that overrides these performance, confusion, reliability, and design issues. You should only do so if you're getting something in return.
Uses
For private members, Eric Lippert's answer describes a good use: (Memoization).
You can use it to implement a Strategy Pattern in a function-based manner rather than requiring a class hierarchy. Again, I'd use private members for this...
...Example code:
public class Context
{
private Func<int, int, int> executeStrategy;
public Context(Func<int, int, int> executeStrategy) {
this.executeStrategy = executeStrategy;
}
public int ExecuteStrategy(int a, int b) {
return executeStrategy(a, b);
}
}
I have found a particular case where I think public delegate properties are warrented: To implement a Template Method Pattern with instances instead of derived classes...
...This is particularly useful in automated integration tests where you have a lot of setup/tear down. In such cases it often makes sense to keep state in a class designed to encapsulate the pattern rather than rely on the unit test fixture. This way you can easily support sharing the skeleton of the test suite between fixtures, without relying on (sometimes shoddy) test fixture inheritance. It also might be more amenable to parallelization, depending on the implementation of your tests.
var test = new MyFancyUITest
{
// I usually name these things in a more test specific manner...
Setup = () => { /* ... */ },
TearDown = () => { /* ... */ },
};
test.Execute();
Intellisense Support
outside users of the function see unnamed parameters - sometimes this is helpfull although it would be nice to be able to name them.
Use a named delegate - I believe this will get you at least some Intellisense for the parameters (probably just the names, less likely XML docs - please correct me if I'm wrong):
public class MyClass
{
public delegate int DoSomethingImpl(int foo, int bizBar);
public DoSomethingImpl DoSomething = (x, y) => { return x + y; }
}
I'd avoid delegate properties/fields as method replacements for public methods. For private methods it's a tool, but not one I use very often.
instance delegate fields have a per instance memory cost. Probably a premature optimization for most classes, but still something to keep in mind.
Your code uses a public mutable field, which can be changed at any time. That hurts encapsulation.
If you use the field initializer syntax, you can't access this. So field initializer syntax is mainly useful for static methods.
Makes static analysis much harder, since the implementation of that method isn't known at compile-time.
There are some cases where delegate properties/fields might be useful:
Handlers of some sort. Especially if multi-casting (and thus the event subscription pattern) doesn't make much sense
Assigning something that can't be easily described by a simple method body. Such as a memoized function.
The delegate is runtime generated or at least its value is only decided at runtime
Using a closure over local variables is an alternative to using a method and private fields. I strongly dislike classes with lots of fields, especially if some of these fields are only used by two methods or less. In these situations, using a delegate in a field can be preferable to conventional methods
class MyClassConventional {
int? someValue; // When Mark() is called, remember the value so that we can do something with it in Process(). Not used in any other method.
int X;
void Mark() {
someValue = X;
}
void Process() {
// Do something with someValue.Value
}
}
class MyClassClosure {
int X;
Action Process = null;
void Mark() {
int someValue = X;
Process = () => { // Do something with someValue };
}
}
This question presents a false dichotomy - between functions, and a delegate with an equivalent signature. The main difference is that one of the two you should only use if there are no other choices. Use this in your day to day work, and it will be thrown out of any code review.
The benefits that have been mentioned are far outweighed by the fact that there is almost never a reason to write code that is so obscure; especially when this code makes it look like you don't know how to program C#.
I urge anyone reading this to ignore any of the benefits which have been stated, since they are all overwhelmed by the fact that this is the kind of code that demonstrates that you do not know how to program in C#.
The only exception to that rule is if you have a need for one of the benefits, and that need can't be satisfied in any other way. In that case, you'll need to write more comment than code to explain why you have a good reason to do it. Be prepared to answer as clearly as Eric Lippert did. You'd better be able to explain as well as Eric does that you can't accomplish your requirements and write understandable code at the same time.