I am currently trying to use a string array populated with values from Class B in Class A.
I have tried to copy the array over as such
string[] playerHand2 = new string[5];
Array.Copy(Deck.playerHand, playerHand2, 5);
However I get a null reference exception when I try to display the contents like so:
Console.WriteLine("Players hand:");
foreach (var item in playerHand2)
{
Console.Write(item.ToString());
}
Any adive pointing me in the correct direction is much appreciated.
One of the items in Deck.playerHand was already null.
This null value is copied into playerHand2.
When itterating through playerHand2, null.ToString() is called, resulting in your NullReferenceException.
You can check for a null-value with:
bool hasNulls = Array.IndexOf(Deck.playerHand, null) > 0;
or with LINQ:
bool hasNulls = Deck.playerHand.Any(s => s == null);
You do not need to copy the Array to use it, and converting a string to string is not helpful.
You can simply use:
foreach (var item in Deck.playerHand)
{
Console.WriteLine(item);
}
in general, you can also overwrite null with " " using the following:
for(int x = 0; x < Deck.playerHand.Length; x++)
{
if(Deck.playerHand[x] == null)
{
Deck.playerHand[x] = " ";
}
}
combined that gives following code:
for(int x = 0; x < Deck.playerHand.Length; x++)
{
if(Deck.playerHand[x] == null)
{
Deck.playerHand[x] = " ";
}
Console.WriteLine(Deck.playerHand[x]);
}
or even more compact, see #saravanan:
foreach(string item in Deck.playerHand)
{
Console.Write(!string.IsNullOrEmpty(item)?item.ToString():"");
}
The following code works perfectly fine for me:
string[] playerHand = new string[7] { "1", "2", "3", "4", "5", "6", "7" };
string[] playerHand2 = new string[5];
Array.Copy(playerHand, playerHand2, 5);
Console.WriteLine("Players hand:");
foreach (var item in playerHand2)
{
Console.Write(item.ToString());
}
Did you actually fill your array 'playerHand' with valid data?
Else make sure you have no null-values in the array of 'playerHand', and the size of 'playerHand' must be at least as big as 'playerHand2'.
Else you can simply avoid this
foreach (var item in playerHand2)
{
if (string.IsNullOrEmpty(item)) { continue; }
Console.Write(item.ToString());
}
I have four arrays of equal length
I am using those arrays in foreach loops.
I am using four variables(i,j,k,l) to increment and to proceed
I am writing my code inside the four nested loops, that code should execute when i=0,j=0,k=,0,l=0
i=1,j=1,k=1,l=1
i=2,j=2,k=2,l=2
.....(depending on the array length)
Please suggest me the code for this required segment.
int i = 0, j = 0, k = 0, l = 0;
foreach (string fieldName in splitFieldnames)
{
i = 0;
foreach (string dataType in splitDatatypeNames)
{
j = 0;
foreach (string controlName in SplitControlNames)
{
k = 0;
foreach (string controlType in splitControlTypeNames)
{
if (i == j && j == k && k == l)
{
if (controlType == "textbox" && dataType == "string")
{
Response.Write("_Student." + fieldName + "= " + controlName + ".Text;");
l++;
break;
}
}
k++;
}
j++;
}
i++;
}
}
I think using LINQ would save you a lot of manual coding:
static void Main(string[] args)
{
var splitFieldnames = new string[] { "field1", "field2", "field3" };
var splitDatatypeNames = new string[] { "datatype1", "string", "string" };
var SplitControlNames = new string[] { "control1", "control2", "control3" };
var splitControlTypeNames = new string[] { "combobox", "textbox", "textbox"};
// this code can handle different sized arrays, but is based strictly
// on the size of the splitFieldnames array as the base.
var splitMerged = splitFieldnames.Select
((c, idx) =>
new
{
fieldName = c,
dataType = splitDatatypeNames.Length > idx ?
splitDatatypeNames[idx] : "",
controlName = SplitControlNames.Length > idx ?
SplitControlNames[idx] : "",
controlTypeName = splitControlTypeNames.Length > idx?
splitControlTypeNames[idx] : "",
});
foreach (var item in splitMerged
.Where(c => c.controlTypeName == "textbox" && c.dataType == "string"))
{
Response.Write("_Student." + item.fieldName + "= "
+ item.controlName + ".Text;");
}
The resulting output would be look like:
_Student.field2= control2.Text;
_Student.field3= control3.Text;
I hope that's what you're looking for, LOL...
I think that in this case a DataTable would be better than 4 arrays, and algorithm you require will be trivial with such data structure.
Use for instead of foreach
for (int i = 0; i < splitFieldnames.Length; i++)
{
string fieldName = splitFieldnames[i];
for (int j = 0; j < splitDatatypeNames.Length; j++)
{
string dataType = splitDatatypeNames[j];
for (int k = 0; k < SplitControlNames.Length; k++)
{
string controlName = SplitControlNames[k];
for (int l = 0; l < splitControlTypeNames.Length; l++)
{
string controlType = splitControlTypeNames[l];
if (i == j && j == k && k == l)
{
if (controlType == "textbox" && dataType == "string")
{
Response.Write("_Student." + fieldName + "= " + controlName + ".Text;");
break;
}
}
}
}
}
}
Note also that break will only break out of the innermost loop! Consider using a return statement instead.
UPDATE (in response to your edit):
The solution is simple, use only one index variable and only one for-loop instead of a lot of foreach-loops
for (int i = 0; i < splitFieldnames.Length; i++)
{
if (splitControlTypeNames[i] == "textbox" && splitDatatypeNames[i] == "string")
{
Response.Write("_Student." + splitFieldnames[i] + "= " + SplitControlNames[i] + ".Text;");
break;
}
}
(Assuming that you want to stop after the first match. If you want to output all string textboxes, drop the break statement.)
Ok, this code is really simple.. If you only need to show the data when i=j=k=l, then no need for any loop, or even for the existence of i,j,k,l.
If you can assure me that all this strings in whatever thing (a collection? an array? a dictionary?) are ordered, is ok.
If they are ordered, then throw away all the for each, and just access each one by position for all the controls you have in the collection that has the minimun.
If all this collection are not ordered, then this is totally uselles, since it will produce differents results on each run.
I will edit this answers with some code, once you can tell me if this is ordered or not.
EDIT:
First of all, you need to check what collection has the least items (since you can't go beyond that)... I don't know the types of this things (you didn't provide them), so let's assume they have a count property.
int minimun = splitFieldnames.count;
if (splitDatatypeNames.count < minimun)
minimun = splitDatatypeNames.count;
if (SplitControlNames.count < minimun)
minimun = SplitControlNames.count
if (splitControlTypeNames.count < minimun)
minimun = splitControlTypeNames.count
once you have the minimun value (since you can't go beyond that), just iterate on that and print whatever you want
for (int i = 0; i < minimun;i++)
{
if (splitControlTypeNames[i].tostring() == "textbox" && splitDatatypeNames[i].tostring() == "string")
{
//Response.Write("_Student." + fieldName + "= " + controlName + ".Text;");
//Also, a parametric string would be better ;)
string result = string.format("_Student.{0}= {1}.Text;",splitFieldnames[0].tostring(),SplitControlNames[0].tostring());
Response.Write(result);
l++;
}
}
I don't know the types, so I'm assuming that they have a tostring method an a count property
If what you are trying to accomplish is process the same index in the four arrays, just use one loop and use a counter to access the value in each array in that one loop:
foreach(string fieldName in SplitControlNames)
{
dataType = splitDatatypeNames[arrayPosition];
controlName = SplitControlNames[arrayPosition];
controlType = splitControlTypeNames[arrayPosition];
if (controlType == "textbox" && dataType == "string")
Response.Write("_Student." + fieldName + "= " + controlName + ".Text;");
arrayPosition++;
}
Or, create and populate a structure that has four values in it (fieldName, dataType, controlName, controlType) and have one array of that structure
I am trying to read a *.csv-file.
The *.csv-file consist of two columns separated by semicolon (";").
I am able to read the *.csv-file using StreamReader and able to separate each line by using the Split() function. I want to store each column into a separate array and then display it.
Is it possible to do that?
You can do it like this:
using System.IO;
static void Main(string[] args)
{
using(var reader = new StreamReader(#"C:\test.csv"))
{
List<string> listA = new List<string>();
List<string> listB = new List<string>();
while (!reader.EndOfStream)
{
var line = reader.ReadLine();
var values = line.Split(';');
listA.Add(values[0]);
listB.Add(values[1]);
}
}
}
My favourite CSV parser is one built into .NET library. This is a hidden treasure inside Microsoft.VisualBasic namespace.
Below is a sample code:
using Microsoft.VisualBasic.FileIO;
var path = #"C:\Person.csv"; // Habeeb, "Dubai Media City, Dubai"
using (TextFieldParser csvParser = new TextFieldParser(path))
{
csvParser.CommentTokens = new string[] { "#" };
csvParser.SetDelimiters(new string[] { "," });
csvParser.HasFieldsEnclosedInQuotes = true;
// Skip the row with the column names
csvParser.ReadLine();
while (!csvParser.EndOfData)
{
// Read current line fields, pointer moves to the next line.
string[] fields = csvParser.ReadFields();
string Name = fields[0];
string Address = fields[1];
}
}
Remember to add reference to Microsoft.VisualBasic
More details about the parser is given here: http://codeskaters.blogspot.ae/2015/11/c-easiest-csv-parser-built-in-net.html
LINQ way:
var lines = File.ReadAllLines("test.txt").Select(a => a.Split(';'));
var csv = from line in lines
select (from piece in line
select piece);
^^Wrong - Edit by Nick
It appears the original answerer was attempting to populate csv with a 2 dimensional array - an array containing arrays. Each item in the first array contains an array representing that line number with each item in the nested array containing the data for that specific column.
var csv = from line in lines
select (line.Split(',')).ToArray();
Just came across this library: https://github.com/JoshClose/CsvHelper
Very intuitive and easy to use. Has a nuget package too which made is quick to implement: https://www.nuget.org/packages/CsvHelper/27.2.1. Also appears to be actively maintained which I like.
Configuring it to use a semi-colon is easy: https://github.com/JoshClose/CsvHelper/wiki/Custom-Configurations
You can't create an array immediately because you need to know the number of rows from the beginning (and this would require to read the csv file twice)
You can store values in two List<T> and then use them or convert into an array using List<T>.ToArray()
Very simple example:
var column1 = new List<string>();
var column2 = new List<string>();
using (var rd = new StreamReader("filename.csv"))
{
while (!rd.EndOfStream)
{
var splits = rd.ReadLine().Split(';');
column1.Add(splits[0]);
column2.Add(splits[1]);
}
}
// print column1
Console.WriteLine("Column 1:");
foreach (var element in column1)
Console.WriteLine(element);
// print column2
Console.WriteLine("Column 2:");
foreach (var element in column2)
Console.WriteLine(element);
N.B.
Please note that this is just a very simple example. Using string.Split does not account for cases where some records contain the separator ; inside it.
For a safer approach, consider using some csv specific libraries like CsvHelper on nuget.
I usually use this parser from codeproject, since there's a bunch of character escapes and similar that it handles for me.
Here is my variation of the top voted answer:
var contents = File.ReadAllText(filename).Split('\n');
var csv = from line in contents
select line.Split(',').ToArray();
The csv variable can then be used as in the following example:
int headerRows = 5;
foreach (var row in csv.Skip(headerRows)
.TakeWhile(r => r.Length > 1 && r.Last().Trim().Length > 0))
{
String zerothColumnValue = row[0]; // leftmost column
var firstColumnValue = row[1];
}
If you need to skip (head-)lines and/or columns, you can use this to create a 2-dimensional array:
var lines = File.ReadAllLines(path).Select(a => a.Split(';'));
var csv = (from line in lines
select (from col in line
select col).Skip(1).ToArray() // skip the first column
).Skip(2).ToArray(); // skip 2 headlines
This is quite useful if you need to shape the data before you process it further (assuming the first 2 lines consist of the headline, and the first column is a row title - which you don't need to have in the array because you just want to regard the data).
N.B. You can easily get the headlines and the 1st column by using the following code:
var coltitle = (from line in lines
select line.Skip(1).ToArray() // skip 1st column
).Skip(1).Take(1).FirstOrDefault().ToArray(); // take the 2nd row
var rowtitle = (from line in lines select line[0] // take 1st column
).Skip(2).ToArray(); // skip 2 headlines
This code example assumes the following structure of your *.csv file:
Note: If you need to skip empty rows - which can by handy sometimes, you can do so by inserting
where line.Any(a=>!string.IsNullOrWhiteSpace(a))
between the from and the select statement in the LINQ code examples above.
You can use Microsoft.VisualBasic.FileIO.TextFieldParser dll in C# for better performance
get below code example from above article
static void Main()
{
string csv_file_path=#"C:\Users\Administrator\Desktop\test.csv";
DataTable csvData = GetDataTabletFromCSVFile(csv_file_path);
Console.WriteLine("Rows count:" + csvData.Rows.Count);
Console.ReadLine();
}
private static DataTable GetDataTabletFromCSVFile(string csv_file_path)
{
DataTable csvData = new DataTable();
try
{
using(TextFieldParser csvReader = new TextFieldParser(csv_file_path))
{
csvReader.SetDelimiters(new string[] { "," });
csvReader.HasFieldsEnclosedInQuotes = true;
string[] colFields = csvReader.ReadFields();
foreach (string column in colFields)
{
DataColumn datecolumn = new DataColumn(column);
datecolumn.AllowDBNull = true;
csvData.Columns.Add(datecolumn);
}
while (!csvReader.EndOfData)
{
string[] fieldData = csvReader.ReadFields();
//Making empty value as null
for (int i = 0; i < fieldData.Length; i++)
{
if (fieldData[i] == "")
{
fieldData[i] = null;
}
}
csvData.Rows.Add(fieldData);
}
}
}
catch (Exception ex)
{
}
return csvData;
}
Hi all, I created a static class for doing this.
+ column check
+ quota sign removal
public static class CSV
{
public static List<string[]> Import(string file, char csvDelimiter, bool ignoreHeadline, bool removeQuoteSign)
{
return ReadCSVFile(file, csvDelimiter, ignoreHeadline, removeQuoteSign);
}
private static List<string[]> ReadCSVFile(string filename, char csvDelimiter, bool ignoreHeadline, bool removeQuoteSign)
{
string[] result = new string[0];
List<string[]> lst = new List<string[]>();
string line;
int currentLineNumner = 0;
int columnCount = 0;
// Read the file and display it line by line.
using (System.IO.StreamReader file = new System.IO.StreamReader(filename))
{
while ((line = file.ReadLine()) != null)
{
currentLineNumner++;
string[] strAr = line.Split(csvDelimiter);
// save column count of dirst line
if (currentLineNumner == 1)
{
columnCount = strAr.Count();
}
else
{
//Check column count of every other lines
if (strAr.Count() != columnCount)
{
throw new Exception(string.Format("CSV Import Exception: Wrong column count in line {0}", currentLineNumner));
}
}
if (removeQuoteSign) strAr = RemoveQouteSign(strAr);
if (ignoreHeadline)
{
if(currentLineNumner !=1) lst.Add(strAr);
}
else
{
lst.Add(strAr);
}
}
}
return lst;
}
private static string[] RemoveQouteSign(string[] ar)
{
for (int i = 0;i< ar.Count() ; i++)
{
if (ar[i].StartsWith("\"") || ar[i].StartsWith("'")) ar[i] = ar[i].Substring(1);
if (ar[i].EndsWith("\"") || ar[i].EndsWith("'")) ar[i] = ar[i].Substring(0,ar[i].Length-1);
}
return ar;
}
}
I have spend few hours searching for a right library, but finally I wrote my own code :)
You can read file (or database) with whatever tools you want and then apply the following routine to each line:
private static string[] SmartSplit(string line, char separator = ',')
{
var inQuotes = false;
var token = "";
var lines = new List<string>();
for (var i = 0; i < line.Length; i++) {
var ch = line[i];
if (inQuotes) // process string in quotes,
{
if (ch == '"') {
if (i<line.Length-1 && line[i + 1] == '"') {
i++;
token += '"';
}
else inQuotes = false;
} else token += ch;
} else {
if (ch == '"') inQuotes = true;
else if (ch == separator) {
lines.Add(token);
token = "";
} else token += ch;
}
}
lines.Add(token);
return lines.ToArray();
}
var firstColumn = new List<string>();
var lastColumn = new List<string>();
// your code for reading CSV file
foreach(var line in file)
{
var array = line.Split(';');
firstColumn.Add(array[0]);
lastColumn.Add(array[1]);
}
var firstArray = firstColumn.ToArray();
var lastArray = lastColumn.ToArray();
Here's a special case where one of data field has semicolon (";") as part of it's data in that case most of answers above will fail.
Solution in that case will be
string[] csvRows = System.IO.File.ReadAllLines(FullyQaulifiedFileName);
string[] fields = null;
List<string> lstFields;
string field;
bool quoteStarted = false;
foreach (string csvRow in csvRows)
{
lstFields = new List<string>();
field = "";
for (int i = 0; i < csvRow.Length; i++)
{
string tmp = csvRow.ElementAt(i).ToString();
if(String.Compare(tmp,"\"")==0)
{
quoteStarted = !quoteStarted;
}
if (String.Compare(tmp, ";") == 0 && !quoteStarted)
{
lstFields.Add(field);
field = "";
}
else if (String.Compare(tmp, "\"") != 0)
{
field += tmp;
}
}
if(!string.IsNullOrEmpty(field))
{
lstFields.Add(field);
field = "";
}
// This will hold values for each column for current row under processing
fields = lstFields.ToArray();
}
The open-source Angara.Table library allows to load CSV into typed columns, so you can get the arrays from the columns. Each column can be indexed both by name or index. See http://predictionmachines.github.io/Angara.Table/saveload.html.
The library follows RFC4180 for CSV; it enables type inference and multiline strings.
Example:
using System.Collections.Immutable;
using Angara.Data;
using Angara.Data.DelimitedFile;
...
ReadSettings settings = new ReadSettings(Delimiter.Semicolon, false, true, null, null);
Table table = Table.Load("data.csv", settings);
ImmutableArray<double> a = table["double-column-name"].Rows.AsReal;
for(int i = 0; i < a.Length; i++)
{
Console.WriteLine("{0}: {1}", i, a[i]);
}
You can see a column type using the type Column, e.g.
Column c = table["double-column-name"];
Console.WriteLine("Column {0} is double: {1}", c.Name, c.Rows.IsRealColumn);
Since the library is focused on F#, you might need to add a reference to the FSharp.Core 4.4 assembly; click 'Add Reference' on the project and choose FSharp.Core 4.4 under "Assemblies" -> "Extensions".
I have been using csvreader.com(paid component) for years, and I have never had a problem. It is solid, small and fast, but you do have to pay for it. You can set the delimiter to whatever you like.
using (CsvReader reader = new CsvReader(s) {
reader.Settings.Delimiter = ';';
reader.ReadHeaders(); // if headers on a line by themselves. Makes reader.Headers[] available
while (reader.ReadRecord())
... use reader.Values[col_i] ...
}
I am just student working on my master's thesis, but this is the way I solved it and it worked well for me. First you select your file from directory (only in csv format) and then you put the data into the lists.
List<float> t = new List<float>();
List<float> SensorI = new List<float>();
List<float> SensorII = new List<float>();
List<float> SensorIII = new List<float>();
using (OpenFileDialog dialog = new OpenFileDialog())
{
try
{
dialog.Filter = "csv files (*.csv)|*.csv";
dialog.Multiselect = false;
dialog.InitialDirectory = ".";
dialog.Title = "Select file (only in csv format)";
if (dialog.ShowDialog() == DialogResult.OK)
{
var fs = File.ReadAllLines(dialog.FileName).Select(a => a.Split(';'));
int counter = 0;
foreach (var line in fs)
{
counter++;
if (counter > 2) // Skip first two headder lines
{
this.t.Add(float.Parse(line[0]));
this.SensorI.Add(float.Parse(line[1]));
this.SensorII.Add(float.Parse(line[2]));
this.SensorIII.Add(float.Parse(line[3]));
}
}
}
}
catch (Exception exc)
{
MessageBox.Show(
"Error while opening the file.\n" + exc.Message,
this.Text,
MessageBoxButtons.OK,
MessageBoxIcon.Error
);
}
}
This is my 2 simple static methods to convert text from csv file to List<List<string>> and vice versa. Each method use row convertor.
This code should take into account all the possibilities of the csv file. You can define own csv separator and this methods try to correct escape double 'quote' char, and deals with the situation when all text in quotes are one cell and csv separator is inside quoted string including multiple lines in one cell and can ignore empty rows.
Last method is only for testing. So you can ignore it, or test your own, or others solution with this test method :). For testing I used this hard csv with 2 rows on 4 lines:
0,a,""bc,d
"e, f",g,"this,is, o
ne ""lo
ng, cell""",h
This is final code. For simplicity, I removed all try catch blocks.
using System;
using System.Collections.Generic;
using System.Linq;
public static class Csv {
public static string FromListToString(List<List<string>> csv, string separator = ",", char quotation = '"', bool returnFirstRow = true)
{
string content = "";
for (int row = 0; row < csv.Count; row++) {
content += (row > 0 ? Environment.NewLine : "") + RowFromListToString(csv[row], separator, quotation);
}
return content;
}
public static List<List<string>> FromStringToList(string content, string separator = ",", char quotation = '"', bool returnFirstRow = true, bool ignoreEmptyRows = true)
{
List<List<string>> csv = new List<List<string>>();
string[] rows = content.Split(new string[] { Environment.NewLine }, StringSplitOptions.None);
if (rows.Length <= (returnFirstRow ? 0 : 1)) { return csv; }
List<string> csvRow = null;
for (int rowIndex = 0; rowIndex < rows.Length; rowIndex++) {
(List<string> row, bool rowClosed) = RowFromStringToList(rows[rowIndex], csvRow, separator, quotation);
if (rowClosed) { if (!ignoreEmptyRows || row.Any(rowItem => rowItem.Length > 0)) { csv.Add(row); csvRow = null; } } // row ok, add to list
else { csvRow = row; } // not fully created, continue
}
if (!returnFirstRow) { csv.RemoveAt(0); } // remove header
return csv;
}
public static string RowFromListToString(List<string> csvData, string separator = ",", char quotation = '"')
{
csvData = csvData.Select(element =>
{
if (element.Contains(quotation)) {
element = element.Replace(quotation.ToString(), quotation.ToString() + quotation.ToString());
}
if (element.Contains(separator) || element.Contains(Environment.NewLine)) {
element = "\"" + element + "\"";
}
return element;
}).ToList();
return string.Join(separator, csvData);
}
public static (List<string>, bool) RowFromStringToList(string csvRow, List<string> continueWithRow = null, string separator = ",", char quotation = '"')
{
bool rowClosed = true;
if (continueWithRow != null && continueWithRow.Count > 0) {
// in previous result quotation are fixed so i need convert back to double quotation
string previousCell = quotation.ToString() + continueWithRow.Last().Replace(quotation.ToString(), quotation.ToString() + quotation.ToString()) + Environment.NewLine;
continueWithRow.RemoveAt(continueWithRow.Count - 1);
csvRow = previousCell + csvRow;
}
char tempQuote = (char)162;
while (csvRow.Contains(tempQuote)) { tempQuote = (char)(tempQuote + 1); }
char tempSeparator = (char)(tempQuote + 1);
while (csvRow.Contains(tempSeparator)) { tempSeparator = (char)(tempSeparator + 1); }
csvRow = csvRow.Replace(quotation.ToString() + quotation.ToString(), tempQuote.ToString());
if(csvRow.Split(new char[] { quotation }, StringSplitOptions.None).Length % 2 == 0) { rowClosed = !rowClosed; }
string[] csvSplit = csvRow.Split(new string[] { separator }, StringSplitOptions.None);
List<string> csvList = csvSplit
.ToList()
.Aggregate("",
(string row, string item) => {
if (row.Count((ch) => ch == quotation) % 2 == 0) { return row + (row.Length > 0 ? tempSeparator.ToString() : "") + item; }
else { return row + separator + item; }
},
(string row) => row.Split(tempSeparator).Select((string item) => item.Trim(quotation).Replace(tempQuote, quotation))
).ToList();
if (continueWithRow != null && continueWithRow.Count > 0) {
return (continueWithRow.Concat(csvList).ToList(), rowClosed);
}
return (csvList, rowClosed);
}
public static bool Test()
{
string csvText = "0,a,\"\"bc,d" + Environment.NewLine + "\"e, f\",g,\"this,is, o" + Environment.NewLine + "ne \"\"lo" + Environment.NewLine + "ng, cell\"\"\",h";
List<List<string>> csvList = new List<List<string>>() { new List<string>() { "0", "a", "\"bc", "d" }, new List<string>() { "e, f", "g", "this,is, o" + Environment.NewLine + "ne \"lo" + Environment.NewLine + "ng, cell\"", "h" } };
List<List<string>> csvTextAsList = Csv.FromStringToList(csvText);
bool ok = Enumerable.SequenceEqual(csvList[0], csvTextAsList[0]) && Enumerable.SequenceEqual(csvList[1], csvTextAsList[1]);
string csvListAsText = Csv.FromListToString(csvList);
return ok && csvListAsText == csvText;
}
}
Usage examples:
// get List<List<string>> representation of csv
var csvFromText = Csv.FromStringToList(csvAsText);
// read csv file with custom separator and quote
// return no header and ignore empty rows
var csvFile = File.ReadAllText(csvFileFullPath);
var csvFromFile = Csv.FromStringToList(csvFile, ";", '"', false, false);
// get text representation of csvData from List<List<string>>
var csvAsText = Csv.FromListToString(csvData);
Notes:
This: char tempQuote = (char)162; is first rare character from ASCI table. The script searches for this, or the first next few ascii character that is NOT in the text and uses it as a temporary escape and quote characters.
Still wrong. You need to compensate for "" in quotes.
Here is my solution Microsoft style csv.
/// <summary>
/// Microsoft style csv file. " is the quote character, "" is an escaped quote.
/// </summary>
/// <param name="fileName"></param>
/// <param name="sepChar"></param>
/// <param name="quoteChar"></param>
/// <param name="escChar"></param>
/// <returns></returns>
public static List<string[]> ReadCSVFileMSStyle(string fileName, char sepChar = ',', char quoteChar = '"')
{
List<string[]> ret = new List<string[]>();
string[] csvRows = System.IO.File.ReadAllLines(fileName);
foreach (string csvRow in csvRows)
{
bool inQuotes = false;
List<string> fields = new List<string>();
string field = "";
for (int i = 0; i < csvRow.Length; i++)
{
if (inQuotes)
{
// Is it a "" inside quoted area? (escaped litteral quote)
if(i < csvRow.Length - 1 && csvRow[i] == quoteChar && csvRow[i+1] == quoteChar)
{
i++;
field += quoteChar;
}
else if(csvRow[i] == quoteChar)
{
inQuotes = false;
}
else
{
field += csvRow[i];
}
}
else // Not in quoted region
{
if (csvRow[i] == quoteChar)
{
inQuotes = true;
}
if (csvRow[i] == sepChar)
{
fields.Add(field);
field = "";
}
else
{
field += csvRow[i];
}
}
}
if (!string.IsNullOrEmpty(field))
{
fields.Add(field);
field = "";
}
ret.Add(fields.ToArray());
}
return ret;
}
}
I have a library that is doing exactly you need.
Some time ago I had wrote simple and fast enough library for work with CSV files. You can find it by the following link: https://github.com/ukushu/DataExporter/blob/master/Csv.cs
It works with CSV like with 2 dimensions array. Exactly like you need.
As example, in case of you need all of values of 3rd row only you need is to write:
Csv csv = new Csv();
csv.FileOpen("c:\\file1.csv");
var allValuesOf3rdRow = csv.Rows[2];
or to read 2nd cell of 3rd row:
var value = csv.Rows[2][1];
Headers are required in csv for json conversion in the below code
You can use below code as is without making any changes.
This code will work with two row headers or with one row header.
Below code reads the uploaded IForm File and converts to memory stream.
If you want to use file path instead of uploaded file you can replace
new StreamReader(ms, System.Text.Encoding.UTF8, true)) with new StreamReader("../../examplefilepath");
using (var ms = new MemoryStream())
{
administrativesViewModel.csvFile.CopyTo(ms);
ms.Position = 0;
using (StreamReader csvReader = new StreamReader(ms, System.Text.Encoding.UTF8, true))
{
List<string> lines = new List<string>();
while (!csvReader.EndOfStream)
{
var line = csvReader.ReadLine();
var values = line.Split(';');
if (values[0] != "" && values[0] != null)
{
lines.Add(values[0]);
}
}
var csv = new List<string[]>();
foreach (string item in lines)
{
csv.Add(item.Split(','));
}
var properties = lines[0].Split(',');
int csvI = 1;
var listObjResult = new List<Dictionary<string, string>>();
if (lines.Count() > 1)
{
var ln = lines[0].Substring(0, lines[0].Count() - 1);
var ln1 = lines[1].Substring(0, lines[1].Count() - 1);
var lnSplit = ln.Split(',');
var ln1Split = ln1.Split(',');
if (lnSplit.Count() != ln1Split.Count())
{
properties = lines[1].Split(',');
csvI = 2;
}
}
for (int i = csvI; i < csv.Count(); i++)
{
var objResult = new Dictionary<string, string>();
if (csvI > 0)
{
var splitProp = lines[0].Split(":");
if (splitProp.Count() > 1)
{
if (splitProp[0] != "" && splitProp[0] != null && splitProp[1] != "" && splitProp[1] != null)
{
objResult.Add(splitProp[0], splitProp[1]);
}
}
}
for (int j = 0; j < properties.Length; j++)
if (!properties[j].Contains(":"))
{
objResult.Add(properties[j], csv[i][j]);
}
listObjResult.Add(objResult);
}
var result = JsonConvert.SerializeObject(listObjResult);
var result2 = JArray.Parse(result);
Console.WriteLine(result2);
}
}
look at this
using CsvFramework;
using System.Collections.Generic;
namespace CvsParser
{
public class Customer
{
public int Id { get; set; }
public string Name { get; set; }
public List<Order> Orders { get; set; }
}
public class Order
{
public int Id { get; set; }
public int CustomerId { get; set; }
public int Quantity { get; set; }
public int Amount { get; set; }
public List<OrderItem> OrderItems { get; set; }
}
public class Address
{
public int Id { get; set; }
public int CustomerId { get; set; }
public string Name { get; set; }
}
public class OrderItem
{
public int Id { get; set; }
public int OrderId { get; set; }
public string ProductName { get; set; }
}
class Program
{
static void Main(string[] args)
{
var customerLines = System.IO.File.ReadAllLines(#"Customers.csv");
var orderLines = System.IO.File.ReadAllLines(#"Orders.csv");
var orderItemLines = System.IO.File.ReadAllLines(#"OrderItemLines.csv");
CsvFactory.Register<Customer>(builder =>
{
builder.Add(a => a.Id).Type(typeof(int)).Index(0).IsKey(true);
builder.Add(a => a.Name).Type(typeof(string)).Index(1);
builder.AddNavigation(n => n.Orders).RelationKey<Order, int>(k => k.CustomerId);
}, false, ',', customerLines);
CsvFactory.Register<Order>(builder =>
{
builder.Add(a => a.Id).Type(typeof(int)).Index(0).IsKey(true);
builder.Add(a => a.CustomerId).Type(typeof(int)).Index(1);
builder.Add(a => a.Quantity).Type(typeof(int)).Index(2);
builder.Add(a => a.Amount).Type(typeof(int)).Index(3);
builder.AddNavigation(n => n.OrderItems).RelationKey<OrderItem, int>(k => k.OrderId);
}, true, ',', orderLines);
CsvFactory.Register<OrderItem>(builder =>
{
builder.Add(a => a.Id).Type(typeof(int)).Index(0).IsKey(true);
builder.Add(a => a.OrderId).Type(typeof(int)).Index(1);
builder.Add(a => a.ProductName).Type(typeof(string)).Index(2);
}, false, ',', orderItemLines);
var customers = CsvFactory.Parse<Customer>();
}
}
}