Below is the code i am using to add records to database.I know I am calling saveChanges() everytime which is expensive, but if a call save changes once after all i might get duplicate key exception. So i am looking for any idea to make it better to improve performance keeping duplicate records in mind.
using (var db = new dbEntities())
{
for (int i = 0; i < csvCustomers.Count; i++)
{
var csvCustomer = csvCustomers[i];
dbcustomer customer = new dbcustomer() { ADDRESS = csvCustomer.ADDRESS, FIRSTNAME = csvCustomer.FIRSTNAME, LASTNAME = csvCustomer.LASTNAME, PHONE = csvCustomer.PHONE, ZIPCODE = csvCustomer.ZIP };
try
{
dbzipcode z = db.dbzipcodes.FirstOrDefault(x => x.ZIP == customer.ZIPCODE);
//TODO: Handle if Zip Code not Found in DB
if (z == null)
{
db.dbcustomers.Add(customer);
throw new DbEntityValidationException("Zip code not found in database.");
}
customer.dbzipcode = z;
z.dbcustomers.Add(customer);
db.SaveChanges();
}
}
}
One solution that i have in my mind is to add data in batches and then call db.SaveChanges() and in case of Exception reduces the batch size recursively for those records.
Using EF to insert huge #'s of records is going to incur a significant cost compared to more direct approaches, but there are a few considerations you can make to markedly improve performance.
Firstly, batching the requests with a save changes will be preferential to saving individual records, or attempting to commit all of the changes at once. You will need to deal with exceptions if/when a batch fails. (Possibly committing that batch one at a time to fully isolate duplicate rows)
Next, you can pre-cache your zip codes rather than looking it up each iteration. Don't load the entire entity, just cache the zip code and the ID into an in-memory list:
(If the zip code entity amounts to little more than this, then just load the entity)
var zipCodes = db.dbzipcodes.Select(x => new {x.ZIPCODEID, x.ZIP}).ToList();
This will require a bit of extra attention when it comes to associating a zipcode to the customer within the batched calls since the zip code will initially not be known by the DbContext but may be known when the second customer for the same zip code is added.
To associate a zip code without loading it in a DbContext:
var customerZipCode = zipCodes.SingleOrDefault(x => x.ZIP = customer.ZIPCODE);
// + exists check...
var zipCode = new dbzipcode { ZIPCODEID = customerZipCode.ZIPCODEID };
db.dbzipcodes.Attach(zipCode);
customer.dbzipcode = zipCode;
// ...
If you did load the entire zip code entity into the cached list, then the var zipCode = new dbzipcode ... is not needed, just attach the cached entity.
However, if in the batch that zip code has already been associated to the DbContext you will get an error, (regardless of whether you cached the entity or just the ID/Code) so you need to first check the dbContext in-memory zip codes:
var customerZipCode = zipCodes.SingleOrDefault(x => x.ZIP = customer.ZIPCODE);
// + exists check...
var zipCode = db.dbzipcodes.Local.SingleOrDefault(x => x.ZIPCODEID == customerZipCode.ZIPCODEID)
?? new dbzipcode { ZIPCODEID = customerZipCode.ZIPCODEID };
db.dbzipcodes.Attach(zipCode);
customer.dbzipcode = zipCode;
// ...
Lastly, EF tracks a lot of extra info in memory as the context so the other consideration along with batching would be to avoid using the same DbContext across all batches, rather opening a DbContext with each batch. As you add items and call SaveChanges across a DbContext, it is still tracking each entity that gets added. If you did batches of 1000 or so, the context would be tracking just that 1000 rather than 1000 then 2000, then 3000, etc. up to 5 Million rows.
I am currently getting this error:
System.Data.SqlClient.SqlException: New transaction is not allowed because there are other threads running in the session.
while running this code:
public class ProductManager : IProductManager
{
#region Declare Models
private RivWorks.Model.Negotiation.RIV_Entities _dbRiv = RivWorks.Model.Stores.RivEntities(AppSettings.RivWorkEntities_connString);
private RivWorks.Model.NegotiationAutos.RivFeedsEntities _dbFeed = RivWorks.Model.Stores.FeedEntities(AppSettings.FeedAutosEntities_connString);
#endregion
public IProduct GetProductById(Guid productId)
{
// Do a quick sync of the feeds...
SyncFeeds();
...
// get a product...
...
return product;
}
private void SyncFeeds()
{
bool found = false;
string feedSource = "AUTO";
switch (feedSource) // companyFeedDetail.FeedSourceTable.ToUpper())
{
case "AUTO":
var clientList = from a in _dbFeed.Client.Include("Auto") select a;
foreach (RivWorks.Model.NegotiationAutos.Client client in clientList)
{
var companyFeedDetailList = from a in _dbRiv.AutoNegotiationDetails where a.ClientID == client.ClientID select a;
foreach (RivWorks.Model.Negotiation.AutoNegotiationDetails companyFeedDetail in companyFeedDetailList)
{
if (companyFeedDetail.FeedSourceTable.ToUpper() == "AUTO")
{
var company = (from a in _dbRiv.Company.Include("Product") where a.CompanyId == companyFeedDetail.CompanyId select a).First();
foreach (RivWorks.Model.NegotiationAutos.Auto sourceProduct in client.Auto)
{
foreach (RivWorks.Model.Negotiation.Product targetProduct in company.Product)
{
if (targetProduct.alternateProductID == sourceProduct.AutoID)
{
found = true;
break;
}
}
if (!found)
{
var newProduct = new RivWorks.Model.Negotiation.Product();
newProduct.alternateProductID = sourceProduct.AutoID;
newProduct.isFromFeed = true;
newProduct.isDeleted = false;
newProduct.SKU = sourceProduct.StockNumber;
company.Product.Add(newProduct);
}
}
_dbRiv.SaveChanges(); // ### THIS BREAKS ### //
}
}
}
break;
}
}
}
Model #1 - This model sits in a database on our Dev Server.
Model #1 http://content.screencast.com/users/Keith.Barrows/folders/Jing/media/bdb2b000-6e60-4af0-a7a1-2bb6b05d8bc1/Model1.png
Model #2 - This model sits in a database on our Prod Server and is updated each day by automatic feeds. alt text http://content.screencast.com/users/Keith.Barrows/folders/Jing/media/4260259f-bce6-43d5-9d2a-017bd9a980d4/Model2.png
Note - The red circled items in Model #1 are the fields I use to "map" to Model #2. Please ignore the red circles in Model #2: that is from another question I had which is now answered.
Note: I still need to put in an isDeleted check so I can soft delete it from DB1 if it has gone out of our client's inventory.
All I want to do, with this particular code, is connect a company in DB1 with a client in DB2, get their product list from DB2 and INSERT it in DB1 if it is not already there. First time through should be a full pull of inventory. Each time it is run there after nothing should happen unless new inventory came in on the feed over night.
So the big question - how to I solve the transaction error I am getting? Do I need to drop and recreate my context each time through the loops (does not make sense to me)?
After much pulling out of hair I discovered that the foreach loops were the culprits. What needs to happen is to call EF but return it into an IList<T> of that target type then loop on the IList<T>.
Example:
IList<Client> clientList = from a in _dbFeed.Client.Include("Auto") select a;
foreach (RivWorks.Model.NegotiationAutos.Client client in clientList)
{
var companyFeedDetailList = from a in _dbRiv.AutoNegotiationDetails where a.ClientID == client.ClientID select a;
// ...
}
As you've already identified, you cannot save from within a foreach that is still drawing from the database via an active reader.
Calling ToList() or ToArray() is fine for small data sets, but when you have thousands of rows, you will be consuming a large amount of memory.
It's better to load the rows in chunks.
public static class EntityFrameworkUtil
{
public static IEnumerable<T> QueryInChunksOf<T>(this IQueryable<T> queryable, int chunkSize)
{
return queryable.QueryChunksOfSize(chunkSize).SelectMany(chunk => chunk);
}
public static IEnumerable<T[]> QueryChunksOfSize<T>(this IQueryable<T> queryable, int chunkSize)
{
int chunkNumber = 0;
while (true)
{
var query = (chunkNumber == 0)
? queryable
: queryable.Skip(chunkNumber * chunkSize);
var chunk = query.Take(chunkSize).ToArray();
if (chunk.Length == 0)
yield break;
yield return chunk;
chunkNumber++;
}
}
}
Given the above extension methods, you can write your query like this:
foreach (var client in clientList.OrderBy(c => c.Id).QueryInChunksOf(100))
{
// do stuff
context.SaveChanges();
}
The queryable object you call this method on must be ordered. This is because Entity Framework only supports IQueryable<T>.Skip(int) on ordered queries, which makes sense when you consider that multiple queries for different ranges require the ordering to be stable. If the ordering isn't important to you, just order by primary key as that's likely to have a clustered index.
This version will query the database in batches of 100. Note that SaveChanges() is called for each entity.
If you want to improve your throughput dramatically, you should call SaveChanges() less frequently. Use code like this instead:
foreach (var chunk in clientList.OrderBy(c => c.Id).QueryChunksOfSize(100))
{
foreach (var client in chunk)
{
// do stuff
}
context.SaveChanges();
}
This results in 100 times fewer database update calls. Of course each of those calls takes longer to complete, but you still come out way ahead in the end. Your mileage may vary, but this was worlds faster for me.
And it gets around the exception you were seeing.
EDIT I revisited this question after running SQL Profiler and updated a few things to improve performance. For anyone who is interested, here is some sample SQL that shows what is created by the DB.
The first loop doesn't need to skip anything, so is simpler.
SELECT TOP (100) -- the chunk size
[Extent1].[Id] AS [Id],
[Extent1].[Name] AS [Name],
FROM [dbo].[Clients] AS [Extent1]
ORDER BY [Extent1].[Id] ASC
Subsequent calls need to skip previous chunks of results, so introduces usage of row_number:
SELECT TOP (100) -- the chunk size
[Extent1].[Id] AS [Id],
[Extent1].[Name] AS [Name],
FROM (
SELECT [Extent1].[Id] AS [Id], [Extent1].[Name] AS [Name], row_number()
OVER (ORDER BY [Extent1].[Id] ASC) AS [row_number]
FROM [dbo].[Clients] AS [Extent1]
) AS [Extent1]
WHERE [Extent1].[row_number] > 100 -- the number of rows to skip
ORDER BY [Extent1].[Id] ASC
We have now posted an official response to the bug opened on Connect. The workarounds we recommend are as follows:
This error is due to Entity Framework creating an implicit transaction during the SaveChanges() call. The best way to work around the error is to use a different pattern (i.e., not saving while in the midst of reading) or by explicitly declaring a transaction. Here are three possible solutions:
// 1: Save after iteration (recommended approach in most cases)
using (var context = new MyContext())
{
foreach (var person in context.People)
{
// Change to person
}
context.SaveChanges();
}
// 2: Declare an explicit transaction
using (var transaction = new TransactionScope())
{
using (var context = new MyContext())
{
foreach (var person in context.People)
{
// Change to person
context.SaveChanges();
}
}
transaction.Complete();
}
// 3: Read rows ahead (Dangerous!)
using (var context = new MyContext())
{
var people = context.People.ToList(); // Note that this forces the database
// to evaluate the query immediately
// and could be very bad for large tables.
foreach (var person in people)
{
// Change to person
context.SaveChanges();
}
}
Indeed you cannot save changes inside a foreach loop in C# using Entity Framework.
context.SaveChanges() method acts like a commit on a regular database system (RDMS).
Just make all changes (which Entity Framework will cache) and then save all of them at once calling SaveChanges() after the loop (outside of it), like a database commit command.
This works if you can save all changes at once.
Just put context.SaveChanges() after end of your foreach(loop).
Making your queryable lists to .ToList() and it should work fine.
FYI: from a book and some lines adjusted because it's still valid:
Invoking SaveChanges() method begins a transaction which automatically rolls back all changes persisted to the database if an exception occurs before iteration completes; otherwise the transaction commits. You might be tempted to apply the method after each entity update or deletion rather than after iteration completes, especially when you're updating or deleting massive numbers of entities.
If you try to invoke SaveChanges() before all data has been processed, you incur a "New transaction is not allowed because there are other threads running in the session" exception. The exception occurs because SQL Server doesn't permit starting a new transaction on a connection that has a SqlDataReader open, even with Multiple Active Record Sets (MARS) enabled by the connection string (EF's default connection string enables MARS)
Sometimes its better to understand why things are happening ;-)
Always Use your selection as List
Eg:
var tempGroupOfFiles = Entities.Submited_Files.Where(r => r.FileStatusID == 10 && r.EventID == EventId).ToList();
Then Loop through the Collection while save changes
foreach (var item in tempGroupOfFiles)
{
var itemToUpdate = item;
if (itemToUpdate != null)
{
itemToUpdate.FileStatusID = 8;
itemToUpdate.LastModifiedDate = DateTime.Now;
}
Entities.SaveChanges();
}
I was getting this same issue but in a different situation. I had a list of items in a list box. The user can click an item and select delete but I am using a stored proc to delete the item because there is a lot of logic involved in deleting the item. When I call the stored proc the delete works fine but any future call to SaveChanges will cause the error. My solution was to call the stored proc outside of EF and this worked fine. For some reason when I call the stored proc using the EF way of doing things it leaves something open.
We started seeing this error "New transaction is not allowed because there are other threads running in the session" after migrating from EF5 to EF6.
Google brought us here but we are not calling SaveChanges() inside the loop. The errors were raised when executing a stored procedure using the ObjectContext.ExecuteFunction inside a foreach loop reading from the DB.
Any call to ObjectContext.ExecuteFunction wraps the function in a transaction. Beginning a transaction while there is already an open reader causes the error.
It is possible to disable wrapping the SP in a transaction by setting the following option.
_context.Configuration.EnsureTransactionsForFunctionsAndCommands = false;
The EnsureTransactionsForFunctionsAndCommands option allows the SP to run without creating its own transaction and the error is no longer raised.
DbContextConfiguration.EnsureTransactionsForFunctionsAndCommands Property
Here are another 2 options that allow you to invoke SaveChanges() in a for each loop.
The first option is use one DBContext to generate your list objects to iterate through, and then create a 2nd DBContext to call SaveChanges() on. Here is an example:
//Get your IQueryable list of objects from your main DBContext(db)
IQueryable<Object> objects = db.Object.Where(whatever where clause you desire);
//Create a new DBContext outside of the foreach loop
using (DBContext dbMod = new DBContext())
{
//Loop through the IQueryable
foreach (Object object in objects)
{
//Get the same object you are operating on in the foreach loop from the new DBContext(dbMod) using the objects id
Object objectMod = dbMod.Object.Find(object.id);
//Make whatever changes you need on objectMod
objectMod.RightNow = DateTime.Now;
//Invoke SaveChanges() on the dbMod context
dbMod.SaveChanges()
}
}
The 2nd option is to get a list of database objects from the DBContext, but to select only the id's. And then iterate through the list of id's (presumably an int) and get the object corresponding to each int, and invoke SaveChanges() that way. The idea behind this method is grabbing a large list of integers, is a lot more efficient then getting a large list of db objects and calling .ToList() on the entire object. Here is an example of this method:
//Get the list of objects you want from your DBContext, and select just the Id's and create a list
List<int> Ids = db.Object.Where(enter where clause here)Select(m => m.Id).ToList();
var objects = Ids.Select(id => db.Objects.Find(id));
foreach (var object in objects)
{
object.RightNow = DateTime.Now;
db.SaveChanges()
}
If you get this error due to foreach and you really need to save one entity first inside loop and use generated identity further in loop, as was in my case, the easiest solution is to use another DBContext to insert entity which will return Id and use this Id in outer context
For example
using (var context = new DatabaseContext())
{
...
using (var context1 = new DatabaseContext())
{
...
context1.SaveChanges();
}
//get id of inserted object from context1 and use is.
context.SaveChanges();
}
I was also facing same issue.
Here is the cause and solution.
http://blogs.msdn.com/b/cbiyikoglu/archive/2006/11/21/mars-transactions-and-sql-error-3997-3988-or-3983.aspx
Make sure before firing data manipulation commands like inserts, updates, you have closed all previous active SQL readers.
Most common error is functions that read data from db and return values.
For e.g functions like isRecordExist.
In this case we immediately return from the function if we found the record and forget to close the reader.
So in the project were I had this exact same issue the problem wasn't in the foreach or the .toList() it was actually in the AutoFac configuration we used.
This created some weird situations were the above error was thrown but also a bunch of other equivalent errors were thrown.
This was our fix:
Changed this:
container.RegisterType<DataContext>().As<DbContext>().InstancePerLifetimeScope();
container.RegisterType<DbFactory>().As<IDbFactory>().SingleInstance();
container.RegisterType<UnitOfWork>().As<IUnitOfWork>().InstancePerRequest();
To:
container.RegisterType<DataContext>().As<DbContext>().As<DbContext>();
container.RegisterType<DbFactory>().As<IDbFactory>().As<IDbFactory>().InstancePerLifetimeScope();
container.RegisterType<UnitOfWork>().As<IUnitOfWork>().As<IUnitOfWork>();//.InstancePerRequest();
I know it is an old question but i faced this error today.
and i found that, this error can be thrown when a database table trigger gets an error.
for your information, you can check your tables triggers too when you get this error.
I needed to read a huge ResultSet and update some records in the table.
I tried to use chunks as suggested in Drew Noakes's answer.
Unfortunately after 50000 records I've got OutofMemoryException.
The answer Entity framework large data set, out of memory exception explains, that
EF creates second copy of data which uses for change detection (so
that it can persist changes to the database). EF holds this second set
for the lifetime of the context and its this set thats running you out
of memory.
The recommendation is to re-create your context for each batch.
So I've retrieved Minimal and Maximum values of the primary key- the tables have primary keys as auto incremental integers.Then I retrieved from the database chunks of records by opening context for each chunk. After processing the chunk context closes and releases the memory. It insures that memory usage is not growing.
Below is a snippet from my code:
public void ProcessContextByChunks ()
{
var tableName = "MyTable";
var startTime = DateTime.Now;
int i = 0;
var minMaxIds = GetMinMaxIds();
for (int fromKeyID= minMaxIds.From; fromKeyID <= minMaxIds.To; fromKeyID = fromKeyID+_chunkSize)
{
try
{
using (var context = InitContext())
{
var chunk = GetMyTableQuery(context).Where(r => (r.KeyID >= fromKeyID) && (r.KeyID < fromKeyID+ _chunkSize));
try
{
foreach (var row in chunk)
{
foundCount = UpdateRowIfNeeded(++i, row);
}
context.SaveChanges();
}
catch (Exception exc)
{
LogChunkException(i, exc);
}
}
}
catch (Exception exc)
{
LogChunkException(i, exc);
}
}
LogSummaryLine(tableName, i, foundCount, startTime);
}
private FromToRange<int> GetminMaxIds()
{
var minMaxIds = new FromToRange<int>();
using (var context = InitContext())
{
var allRows = GetMyTableQuery(context);
minMaxIds.From = allRows.Min(n => (int?)n.KeyID ?? 0);
minMaxIds.To = allRows.Max(n => (int?)n.KeyID ?? 0);
}
return minMaxIds;
}
private IQueryable<MyTable> GetMyTableQuery(MyEFContext context)
{
return context.MyTable;
}
private MyEFContext InitContext()
{
var context = new MyEFContext();
context.Database.Connection.ConnectionString = _connectionString;
//context.Database.Log = SqlLog;
return context;
}
FromToRange is a simple structure with From and To properties.
Recently I faced the same issue in my project so posting my experience and it might help some on the same boat as i was. The issue was due to i am looping through the results of EF select query (results are not retrieved into memory).
var products = (from e in _context.Products
where e.StatusId == 1
select new { e.Name, e.Type });
foreach (var product in products)
{
//doing some insert EF Queries
//some EF select quries
await _context.SaveChangesAsync(stoppingToken); // This code breaks.
}
I have updated my Products select query to bring the results into LIST rather than IQueryable (This seems to be opening the reader throughout for each loop and hence save was failing).
var products = (from e in _context.Products
where e.StatusId == 1
select new { e.Name, e.Type })**.ToList()**; //see highlighted
The code below works for me:
private pricecheckEntities _context = new pricecheckEntities();
...
private void resetpcheckedtoFalse()
{
try
{
foreach (var product in _context.products)
{
product.pchecked = false;
_context.products.Attach(product);
_context.Entry(product).State = EntityState.Modified;
}
_context.SaveChanges();
}
catch (Exception extofException)
{
MessageBox.Show(extofException.ToString());
}
productsDataGrid.Items.Refresh();
}
In my case, the problem appeared when I called Stored Procedure via EF and then later SaveChanges throw this exception. The problem was in calling the procedure, the enumerator was not disposed. I fixed the code following way:
public bool IsUserInRole(string username, string roleName, DataContext context)
{
var result = context.aspnet_UsersInRoles_IsUserInRoleEF("/", username, roleName);
//using here solved the issue
using (var en = result.GetEnumerator())
{
if (!en.MoveNext())
throw new Exception("emty result of aspnet_UsersInRoles_IsUserInRoleEF");
int? resultData = en.Current;
return resultData == 1;//1 = success, see T-SQL for return codes
}
}
I am much late to the party but today I faced the same error and how I resolved was simple. My scenario was similar to this given code I was making DB transactions inside of nested for-each loops.
The problem is as a Single DB transaction takes a little bit time longer than for-each loop so once the earlier transaction is not complete then the new traction throws an exception, so the solution is to create a new object in the for-each loop where you are making a db transaction.
For the above mentioned scenarios the solution will be like this:
foreach (RivWorks.Model.Negotiation.AutoNegotiationDetails companyFeedDetail in companyFeedDetailList)
{
private RivWorks.Model.Negotiation.RIV_Entities _dbRiv = RivWorks.Model.Stores.RivEntities(AppSettings.RivWorkEntities_connString);
if (companyFeedDetail.FeedSourceTable.ToUpper() == "AUTO")
{
var company = (from a in _dbRiv.Company.Include("Product") where a.CompanyId == companyFeedDetail.CompanyId select a).First();
foreach (RivWorks.Model.NegotiationAutos.Auto sourceProduct in client.Auto)
{
foreach (RivWorks.Model.Negotiation.Product targetProduct in company.Product)
{
if (targetProduct.alternateProductID == sourceProduct.AutoID)
{
found = true;
break;
}
}
if (!found)
{
var newProduct = new RivWorks.Model.Negotiation.Product();
newProduct.alternateProductID = sourceProduct.AutoID;
newProduct.isFromFeed = true;
newProduct.isDeleted = false;
newProduct.SKU = sourceProduct.StockNumber;
company.Product.Add(newProduct);
}
}
_dbRiv.SaveChanges(); // ### THIS BREAKS ### //
}
}
I am a little bit late, but I had this error too. I solved the problem by checking what where the values that where updating.
I found out that my query was wrong and that there where over 250+ edits pending. So I corrected my query, and now it works correct.
So in my situation: Check the query for errors, by debugging over the result that the query returns. After that correct the query.
Hope this helps resolving future problems.
My situation was similar others above. I had an IQueryable which I was doing a foreach on. This in turn called a method with SaveChanges(). Booom exception here as there was already a transaction open from the query above.
// Example:
var myList = _context.Table.Where(x => x.time == null);
foreach(var i in myList)
{
MyFunction(i); // <<-- Has _context.SaveChanges() which throws exception
}
Adding ToList() to the end of the query was the solution in my case.
// Fix
var myList = _context.Table.Where(x => x.time == null).ToList();
Most of answers related with loops. But my problem was different. While i was trying to use multiple dbcontext.Savechanges() command in same scope, i got the error many times.
In my case for ef core 3.1 using
dbcontext.Database.BeginTransaction()
and
dbcontext.Database.CommitTransaction();
has fixed the problem. Here is my entire Code :
public IActionResult ApplyForCourse()
{
var master = _userService.GetMasterFromCurrentUser();
var trainee = new Trainee
{
CourseId = courseId,
JobStatus = model.JobStatus,
Gender = model.Gender,
Name = model.Name,
Surname = model.Surname,
Telephone = model.Telephone,
Email = model.Email,
BirthDate = model.BirthDate,
Description = model.Description,
EducationStatus = EducationStatus.AppliedForEducation,
TraineeType = TraineeType.SiteFirst
};
dbcontext.Trainees.Add(trainee);
dbcontext.SaveChanges();
dbcontext.Database.BeginTransaction();
var user = userManager.GetUserAsync(User).Result;
master.TraineeId = trainee.Id;
master.DateOfBirth = model.BirthDate;
master.EducationStatus = trainee.EducationStatus;
user.Gender = model.Gender;
user.Email = model.Email;
dbcontext.Database.CommitTransaction();
dbcontext.SaveChanges();
return RedirectToAction("Index", "Home");
}
}
Currently, I am struggling with an issue regarding Entity Framework (LINQ to Entities). Most of the time when I try to execute entity.SaveChanges() everything works fine but at some points entity.SaveChanges() takes too much and timesouts. I searched a lot but was unable to find out the answer.
(According to companies policy, I cannot copy code somewhere else. So, I do not have the exact code but I will try to layout the basic structure. I hope it helps you to figure out the problem but if i doesn't then let me know.)
Task:
My task is to scan the whole network for some specific files. Match content of each file with the content of database and based on the matching either insert or update the database with the content of the file. I have around 3000 files on the network.
Problem:
public void PerformAction()
{
DbTransaction tran = null;
entity.Connection.Open(); //entity is a global variable declared like myDatabaseEntity entity = new myDatabaseEntity();
tran = entity.Connection.BeginTransaction();
foreach(string path in listOfPaths)
{
//returns 1 - Multiple matching in database OR
// 2 - One matching file in database OR
// 3 - No Matching found.
int returnValue = SearchDatabase();
if(returnValue == 1)
DoSomething(); //All inserts/updates work perfectly. Save changes also works correctly.
else if(returnValue == 2)
DoSomething(); //Again, everything ok. SaveChanges works perfectly here.
else
{
//This function uses some XML file to generate all the queries dynamically
//Forexample INSERT INTO TABLEA(1,2,3);
GenerateInsertQueriesFromXML();
ExecuteQueries();
SaveChanges(); <---- Problem here. Sometimes take too much time.
}
//Transaction commit/rollback code here
}
}
public bool ExecuteQueries()
{
int result = 0;
foreach(string query in listOfInsertQueries)
{
result = entity.ExecuteStoreCommand(query); //Execute the insert queries
if(result <=0)
return false;
}
entity.TestEntityA a = new entity.TestEntityA();
a.PropertyA = 123;
a.PropertyB = 345;
//I have around 25 properties here
entity.AddToTestEntityA(a);
return true;
}
Found the issue.
The main table where i was inserting all the data had a trigger on INSERT and DELETE.
So, whenever i inserted some new data in the main table, the trigger was firing in the backend and was taking all the time.
Entity framework is FAST and INNOCENT :D
I need to switch data context for some records. So basically I have db context A and B, I fetch records using A, then I switch to B, alter records, and save them.
When I call Attach for B, I get exception that records are using by multiple data context, when I add Detach for A, I get exception, that records are not attached to A.
So how can I switch the data context?
Example
db_creator is creator of db context. Here I fetch the data (corrected version):
using (var db = db_creator.Create())
{
var coll = db.Mailing.Where(it => !it.mail_IsSent).ToList(); // (*)
coll.ForEach(it => db.Detach(it));
return coll;
}
(*) the mistake was caused by refactoring this piece, I created extra data context, and then later I tried to detach records from another one.
Now I would like to switch data context to new one, do some computation and modifications and save the records. coll is List of the records:
using (var db = db_creator.Create())
{
coll.ForEach(it => db.Mailing.Attach(it));
...
db.SaveChanges();
}
I recommend change your design and have ONE context at a time. (Based on your project type this could vary. Usually in web apps it's one context per http request.)
For example in a web application, you can do this like below:
protected MyContext Context
{
get
{
var context = HttpContext.Current.Items["MyContext"];
if (context == null)
{
context = new MyContext();
HttpContext.Current.Items.Add("MyContext", context);
}
return context as MyContext;
}
}
And dispose it in your Application_EndRequest:
app.EndRequest += (sender, args) =>
{
HttpContext.Current.Items.Remove("MyContext");
}
If you have multiple project types, then consider using an Ioc.
But if you still want to use two contexts, you can do as below(myEntity is your object you want to detach/attach):
if (context1.Entry(myEntity).State != EntityState.Detached);
{
((IObjectContextAdapter)context1).ObjectContext.Detach(myEntity);
}
context2.MyEntities.Attach(myEntity);
I have come to the conclusion that it's best (i.e. easier to avoid problems) to use ApplyCurrentValues instead of attaching. That is because when you call Attach there are several things going on that we don't know about, but which may surface in one way or the other through an exception. I prefer to do things the way I have control over what is done.
var myMailings = db_creator.Create().Mailing.Where(it => !it.mail_IsSent).ToList();
... // make modifications and retrieve coll a collection of Mailing objects
using (var db = db_creator.Create()) {
... // if you want to further modify the objects in coll you should do this before writing it to the context
foreach (Mailing it in coll) {
if (it.EntityKey != null) db.GetObjectByKey(it.EntityKey); // load entity
else db.Mailing.Single(x => x.YourId == it.YourId); // load the entity when EntityKey is not available, e.g. because it's a POCO
db.Mailing.ApplyCurrentValues(it); // sets the entity state to Modified
}
db.SaveChanges();
}
EDIT:
I tested the performance of this vs using Attach. It should be noted that for a simple table with an integer primary key, an int, a float and a string column for updating 1000 entries: the difference was 2.6s vs 0.27s, so this is significantly slower.
EDIT2:
A similar question was raised here. There the answer warned about using ApplyCurrentValues in conjunction with timestamp columns.
I also compared performance when loading the entity with db.GetObjectByKey(it.EntityKey) and there the performance difference is much smaller. ApplyCurrentValues then just takes 0.44s.