Hallo guys!
Sorry for the dump question, this is my last resort. I swear i triend countless of other Stackoverflow questions, different Frameworks, etc., but those didnt seem to help.
Ich have the following Problem:
A website displays a list of data (there is a TON of div, li, span etc. tags infront, its a big HTML.)
Im writing a tool that fetches data from a specific list inside a ton of other div tags, downloads it and outputs an excel file.
The website im trying to access, is dynamic. So you open the website, it loads a little bit, and then the list appears (probably some JS and stuff).
When i try to download the website via a webRequest in C#, the html I get ist almost empty with a ton on white spaces, lots of non-html stuff, some garbage data as well.
Now: Im pretty used to C#, HTMLAgillityPack, and countless other libraries, not so much in web related stuff tho. I tried CefSharp, Chromium etc. all of those stuff, but couldnt get them to work properly unfortunately.
I want to have a HTML in my program to work with that looks exactly like the HTML that you see when
you open the dev console in chrome wenn visting the website mentined above.
The HTML parser works flwalessly there.
This is how I image how the code could look like simplified.
Extreme C# pseudocode:
WebBrowserEngine web = new WebBrowserEngine()
web.LoadURLuntilFinished(url); // with all the JS executed and stuff
String html = web.getHTML();
web.close();
My Goal would be that the string html in the pseudocode looks exactly like the one in the Chrome dev tab.
Maybe there is a solution posted somewhere else but i swear i coudlnt find it, been looking for days.
Andy help is greatly appreciated.
#SpencerBench is spot on in saying
It could be that the page is using some combination of scroll state, element visibility, or element positions to trigger content loading. If that's the case, then you'll need to figure out what it is and trigger it programmatically.
To answer the question for your specific use case, we need to understand the behaviour of the page you want to scrape data from, or as I asked in the comments, how do you know the page is "finished"?
However, it's possible to give a fairly generic answer to the question which should act as a starting point for you.
This answer uses Selenium, a package which is commonly used for automating testing of web UIs, but as they say on their home page, that's not the only thing it can be used for.
Primarily it is for automating web applications for testing purposes, but is certainly not limited to just that. Boring web-based administration tasks can (and should) also be automated as well.
The web site I'm scraping
So first we need a web site. I've created one using ASP.net core MVC with .net core 3.1, although the web site's technology stack isn't important, it's the behaviour of the page you want to scrape which is important. This site has 2 pages, unimaginatively called Page1 and Page2.
Page controllers
There's nothing special in these controllers:
namespace StackOverflow68925623Website.Controllers
{
using Microsoft.AspNetCore.Mvc;
public class Page1Controller : Controller
{
public IActionResult Index()
{
return View("Page1");
}
}
}
namespace StackOverflow68925623Website.Controllers
{
using Microsoft.AspNetCore.Mvc;
public class Page2Controller : Controller
{
public IActionResult Index()
{
return View("Page2");
}
}
}
API controller
There's also an API controller (i.e. it returns data rather than a view) which the views can call asynchronously to get some data to display. This one just creates an array of the requested number of random strings.
namespace StackOverflow68925623Website.Controllers
{
using Microsoft.AspNetCore.Mvc;
using System;
using System.Collections.Generic;
using System.Text;
[Route("api/[controller]")]
[ApiController]
public class DataController : ControllerBase
{
[HttpGet("Create")]
public IActionResult Create(int numberOfElements)
{
var response = new List<string>();
for (var i = 0; i < numberOfElements; i++)
{
response.Add(RandomString(10));
}
return Ok(response);
}
private string RandomString(int length)
{
var sb = new StringBuilder();
var random = new Random();
for (var i = 0; i < length; i++)
{
var characterCode = random.Next(65, 90); // A-Z
sb.Append((char)characterCode);
}
return sb.ToString();
}
}
}
Views
Page1's view looks like this:
#{
ViewData["Title"] = "Page 1";
}
<div class="text-center">
<div id="list" />
<script src="~/lib/jquery/dist/jquery.min.js"></script>
<script>
var apiUrl = 'https://localhost:44394/api/Data/Create';
$(document).ready(function () {
$('#list').append('<li id="loading">Loading...</li>');
$.ajax({
url: apiUrl + '?numberOfElements=20000',
datatype: 'json',
success: function (data) {
$('#loading').remove();
var insert = ''
for (var item of data) {
insert += '<li>' + item + '</li>';
}
insert = '<ul id="results">' + insert + '</ul>';
$('#list').html(insert);
},
error: function (xht, status) {
alert('Error: ' + status);
}
});
});
</script>
</div>
So when the page first loads, it just contains an empty div called list, however the page loading trigger's the function passed to jQuery's $(document).ready function, which makes an asynchronous call to the API controller, requesting an array of 20,000 elements. While the call is in progress, "Loading..." is displayed on the screen, and when the call returns, this is replaced by an unordered list containing the received data. This is written in a way intended to be friendly to developers of automated UI tests, or of screen scrapers, because we can tell whether all the data has loaded by testing whether or not the page contains an element with the ID results.
Page2's view looks like this:
#{
ViewData["Title"] = "Page 2";
}
<div class="text-center">
<div id="list">
<ul id="results" />
</div>
<script src="~/lib/jquery/dist/jquery.min.js"></script>
<script>
var apiUrl = 'https://localhost:44394/api/Data/Create';
var requestCount = 0;
var maxRequests = 20;
$(document).ready(function () {
getData();
});
function getDataIfAtBottomOfPage() {
console.log("scroll - " + requestCount + " requests");
if (requestCount < maxRequests) {
console.log("scrollTop " + document.documentElement.scrollTop + " scrollHeight " + document.documentElement.scrollHeight);
if (document.documentElement.scrollTop > (document.documentElement.scrollHeight - window.innerHeight - 100)) {
getData();
}
}
}
function getData() {
window.onscroll = undefined;
requestCount++;
$('results2').append('<li id="loading">Loading...</li>');
$.ajax({
url: apiUrl + '?numberOfElements=50',
datatype: 'json',
success: function (data) {
var insert = ''
for (var item of data) {
insert += '<li>' + item + '</li>';
}
$('#loading').remove();
$('#results').append(insert);
if (requestCount < maxRequests) {
window.setTimeout(function () { window.onscroll = getDataIfAtBottomOfPage }, 1000);
} else {
$('#results').append('<li>That\'s all folks');
}
},
error: function (xht, status) {
alert('Error: ' + status);
}
});
}
</script>
</div>
This gives a nicer user experience because it requests data from the API controller in multiple smaller chunks, so the first chunk of data appears fairly quickly, and once the user has scrolled down to somewhere near the bottom of the page, the next chunk of data is requested, until 20 chunks have been requested and displayed, at which point the text "That's all folks" is added to the end of the unordered list. However this is more difficult to interact with programmatically because you need to scroll the page down to make the new data appear.
(Yes, this implementation is a bit buggy - if the user gets to the bottom of the page too quickly then requesting the next chunk of data doesn't happen until they scroll up a bit. But the question isn't about how to implement this behaviour in a web page, but about how to scrape the displayed data, so please forgive my bugs.)
The scraper
I've implemented the scraper as a xUnit unit test project, just because I'm not doing anything with the data I've scraped from the web site other than Asserting that it is of the correct length, and therefore proving that I haven't prematurely assumed that the web page I'm scraping from is "finished". You can put most of this code (other than the Asserts) into any type of project.
Having created your scraper project, you need to add the Selenium.WebDriver and Selenium.WebDriver.ChromeDriver nuget packages.
Page Object Model
I'm using the Page Object Model pattern to provide a layer of abstraction between functional interaction with the page and the implementation detail of how to code that interaction. Each of the pages in the web site has a corresponding page model class for interacting with that page.
First, a base class with some code which is common to more than one page model class.
namespace StackOverflow68925623Scraper
{
using System;
using OpenQA.Selenium;
using OpenQA.Selenium.Support.UI;
public class PageModel
{
protected PageModel(IWebDriver driver)
{
this.Driver = driver;
}
protected IWebDriver Driver { get; }
public void ScrollToTop()
{
var js = (IJavaScriptExecutor)this.Driver;
js.ExecuteScript("window.scrollTo(0, 0)");
}
public void ScrollToBottom()
{
var js = (IJavaScriptExecutor)this.Driver;
js.ExecuteScript("window.scrollTo(0, document.body.scrollHeight)");
}
protected IWebElement GetById(string id)
{
try
{
return this.Driver.FindElement(By.Id(id));
}
catch (NoSuchElementException)
{
return null;
}
}
protected IWebElement AwaitGetById(string id)
{
var wait = new WebDriverWait(Driver, TimeSpan.FromSeconds(10));
return wait.Until(e => e.FindElement(By.Id(id)));
}
}
}
This base class gives us 4 convenience methods:
Scroll to the top of the page
Scroll to the bottom of the page
Get the element with the supplied ID, or return null if it doesn't exist
Get the element with the supplied ID, or wait for up to 10 seconds for it to appear if it doesn't exist yet
And each page in the web site has its own model class, derived from that base class.
namespace StackOverflow68925623Scraper
{
using OpenQA.Selenium;
public class Page1Model : PageModel
{
public Page1Model(IWebDriver driver) : base(driver)
{
}
public IWebElement AwaitResults => this.AwaitGetById("results");
public void Navigate()
{
this.Driver.Navigate().GoToUrl("https://localhost:44394/Page1");
}
}
}
namespace StackOverflow68925623Scraper
{
using OpenQA.Selenium;
public class Page2Model : PageModel
{
public Page2Model(IWebDriver driver) : base(driver)
{
}
public IWebElement Results => this.GetById("results");
public void Navigate()
{
this.Driver.Navigate().GoToUrl("https://localhost:44394/Page2");
}
}
}
And the Scraper class:
namespace StackOverflow68925623Scraper
{
using OpenQA.Selenium.Chrome;
using System;
using System.Threading;
using Xunit;
public class Scraper
{
[Fact]
public void TestPage1()
{
// Arrange
var driver = new ChromeDriver();
var page = new Page1Model(driver);
page.Navigate();
try
{
// Act
var actualResults = page.AwaitResults.Text.Split(Environment.NewLine);
// Assert
Assert.Equal(20000, actualResults.Length);
}
finally
{
// Ensure the browser window closes even if things go pear-shaped
driver.Quit();
}
}
[Fact]
public void TestPage2()
{
// Arrange
var driver = new ChromeDriver();
var page = new Page2Model(driver);
page.Navigate();
try
{
// Act
while (!page.Results.Text.Contains("That's all folks"))
{
Thread.Sleep(1000);
page.ScrollToBottom();
page.ScrollToTop();
}
var actualResults = page.Results.Text.Split(Environment.NewLine);
// Assert - we expect 1001 because of the extra "that's all folks"
Assert.Equal(1001, actualResults.Length);
}
finally
{
// Ensure the browser window closes even if things go pear-shaped
driver.Quit();
}
}
}
}
So, what's happening here?
// Arrange
var driver = new ChromeDriver();
var page = new Page1Model(driver);
page.Navigate();
ChromeDriver is in the Selenium.WebDriver.ChromeDriver package and implements the IWebDriver interface from the Selenium.WebDriver package with the code to interact with the Chrome browser. Other packages are available containing implementations for all popular browsers. Instantiating the driver object opens a browser window, and calling its Navigate method directs the browser to the page we want to test/scrape.
// Act
var actualResults = page.AwaitResults.Text.Split(Environment.NewLine);
Because on Page1, the results element doesn't exist until all the data has been displayed, and no user interaction is required in order for it to be displayed, we use the page model's AwaitResults property to just wait for that element to appear and return it once it has appeared.
AwaitResults returns an IWebElement instance representing the element, which in turn has various methods and properties we can use to interact with the element. In this case we use its Text property which returns the element's contents as a string, without any markup. Because the data is displayed as an unordered list, each element in the list is delimited by a line break, so we can can use String's Split method to convert it to a string array.
Page2 needs a different approach - we can't use the presence of the results element to determine whether the data has all been displayed, because that element is on the page right from the start, instead we need to check for the string "That's all folks" which is written right at the end of the last chunk of data. Also the data isn't loaded all in one go, and we need to keep scrolling down in order to trigger the loading of the next chunk of data.
// Act
while (!page.Results.Text.Contains("That's all folks"))
{
Thread.Sleep(1000);
page.ScrollToBottom();
page.ScrollToTop();
}
var actualResults = page.Results.Text.Split(Environment.NewLine);
Because of the bug in the UI that I mentioned earlier, if we get to the bottom of the page too quickly, the fetch of the next chunk of data isn't triggered, and attempting to scroll down when already at the bottom of the page doesn't raise another scroll event. That's why I'm scrolling to the bottom of the page and then back to the top - that way I can guarantee that a scroll event is raised. You never know, the web site you're trying to scrape data from may itself be buggy.
Once the "That's all folks" text has appeared, we can go ahead and get the results element's Text property and convert it to a string array as before.
// Assert - we expect 1001 because of the extra "that's all folks"
Assert.Equal(1001, actualResults.Length);
This is the bit that won't be in your code. Because I'm scraping a web site which is under my control, I know exactly how much data it should be displaying so I can check that I've got all the data, and therefore that my scraping code is working correctly.
Further reading
Absolute beginner's introduction to Selenium: https://www.guru99.com/selenium-csharp-tutorial.html
(A curiosity in that article is the way that it starts by creating a console application project and later changes its output type to class library and manually adds the unit test packages, when the project could have been created using one of Visual Studio's unit test project templates. It gets to the right place in the end, albeit via a rather odd route.)
Selenium documentation: https://www.selenium.dev/documentation/
Happy scraping!
If you need to fully execute the web page, then a complete browser like CefSharp is your only option.
It could be that the page is using some combination of scroll state, element visibility, or element positions to trigger content loading. If that's the case, then you'll need to figure out what it is and trigger it programmatically. I know that CefSharp can simulate user actions like clicking, scrolling, etc.
I have a link which I can validate correctly which is followed by the code target="_blank". I do not wish to click the link as it takes me outside of the system I am testing and requires a new login. What I want to do is simply validate target="_blank" is shown after the link. I am working in Selenium webdriver and C#
// Try and find the link for eTMAs http://www.open.ac.uk/assessment/documents/New-eTMA-Interface_000.pdf
string eTMAslink = "http://www.open.ac.uk/assessment/documents/New-eTMA-Interface_000.pdf";
Console.WriteLine($"Checking for eTMAs link http://www.open.ac.uk/assessment/documents/New-eTMA-Interface_000.pdf");
IWebElement eTMAsLink = Globals.GetElementByhref(eTMAslink);
Assert.IsNotNull(eTMAsLink);
Console.WriteLine($"Found eTMAsLink link ", eTMAsLink);
// Now validate target="_blank"> how?
IWebElementdefines the GetAttribute method that you can use to check whether the attribute target is present on the link, e.g.:
Assert.IsNotNull(eTMAsLink);
var targetValue = eTMAslink.GetAttribute("target");
Assert.AreEqual("_blank", targetValue);
Here is how you handle exception. You may try to improve your code for asserting about:blank
using OpenQA.Selenium;
using NUnit.Framework;
public void checknewTab(IWebDriver driver)
{
try
{
/* New tab window with IJavaScriptExecutor */
IJavaScriptExecutor js = (IJavaScriptExecutor)driver;
js.ExecuteScript("window.open();");
/* Switch driver to last tab [which is blank tab] */
driver.SwitchTo().Window(driver.WindowHandles.Last());
/* Verify new Tab by using Assert If it is was not about:blank -
It will throw AssertionException */
Assert.AreEqual("about:blank", driver.Url);
}
catch(AssertionException ex)
{
/* Print [Console.Writeline] that there is not a new Tab
[about:blank] */
}
catch(Exception ex)
{
// Print to see other Exception
}
}
I'm using Selenium for retrieve data from this site, and I encountered a little problem when I try to click an element within a foreach.
What I'm trying to do
I'm trying to get the table associated to a specific category of odds, in the link above we have different categories:
As you can see from the image, I clicked on Asian handicap -1.75 and the site has generated a table through javascript, so inside my code I'm trying to get that table finding the corresponding element and clicking it.
Code
Actually I have two methods, the first called GetAsianHandicap which iterate over all categories of odds:
public List<T> GetAsianHandicap(Uri fixtureLink)
{
//Contains all the categories displayed on the page
string[] categories = new string[] { "-1.75", "-1.5", "-1.25", "-1", "-0.75", "-0.5", "-0.25", "0", "+0.25", "+0.5", "+0.75", "+1", "+1.25", "+1.5", "+1.75" };
foreach(string cat in categories)
{
//Get the html of the table for the current category
string html = GetSelector("Asian handicap " + asian);
if(html == string.Empty)
continue;
//other code
}
}
and then the method GetSelector which click on the searched element, this is the design:
public string GetSelector(string selector)
{
//Get the available table container (the category).
var containers = driver.FindElements(By.XPath("//div[#class='table-container']"));
//Store the html to return.
string html = string.Empty;
foreach (IWebElement container in containers)
{
//Container not available for click.
if (container.GetAttribute("style") == "display: none;")
continue;
//Get container header (contains the description).
IWebElement header = container.FindElement(By.XPath(".//div[starts-with(#class, 'table-header')]"));
//Store the table description.
string description = header.FindElement(By.TagName("a")).Text;
//The container contains the searched category
if (description.Trim() == selector)
{
//Get the available links.
var listItems = driver.FindElement(By.Id("odds-data-table")).FindElements(By.TagName("a"));
//Get the element to click.
IWebElement element = listItems.Where(li => li.Text == selector).FirstOrDefault();
//The element exist
if (element != null)
{
//Click on the container for load the table.
element.Click();
//Wait few seconds on ChromeDriver for table loading.
driver.Manage().Timeouts().ImplicitWait = TimeSpan.FromSeconds(20);
//Get the new html of the page
html = driver.PageSource;
}
return html;
}
return string.Empty;
}
Problem and exception details
When the foreach reach this line:
var listItems = driver.FindElement(By.Id("odds-data-table")).FindElements(By.TagName("a"));
I get this exception:
'OpenQA.Selenium.StaleElementReferenceException' in WebDriver.dll
stale element reference: element is not attached to the page document
Searching for the error means that the html page source was changed, but in this case I store the element to click in a variable and the html itself in another variable, so I can't get rid to patch this issue.
Someone could help me?
Thanks in advance.
I looked at your code and I think you're making it more complicated than it needs to be. I'm assuming you want to scrape the table that is exposed when you click one of the handicap links. Here's some simple code to do this. It dumps the text of the elements which ends up unformatted but you can use this as a starting point and add functionality if you want. I didn't run into any StaleElementExceptions when running this code and I never saw the page refresh so I'm not sure what other people were seeing.
string url = "http://www.oddsportal.com/soccer/europe/champions-league/paok-spartak-moscow-pIXFEt8o/#ah;2";
driver.Url = url;
// get all the (visible) handicap links and click them to open the page and display the table with odds
IReadOnlyCollection<IWebElement> links = driver.FindElements(By.XPath("//a[contains(.,'Asian handicap')]")).Where(e => e.Displayed).ToList();
foreach (var link in links)
{
link.Click();
}
// print all the odds tables
foreach (var item in driver.FindElements(By.XPath("//div[#class='table-container']")))
{
Console.WriteLine(item.Text);
Console.WriteLine("====================================");
}
I would suggest that you spend some more time learning locators. Locators are very powerful and can save you having to stack nested loops looking for one thing... and then children of that thing... and then children of that thing... and so on. The right locator can find all that in one scrape of the page which saves a lot of code and time.
As you mentioned in related Post, this issue is because site executes an auto refresh.
Solution 1:
I would suggest if there is an explicit way to do refresh, perform that refresh on a periodic basis, or (if you are sure, when you need to do refresh).
Solution 2:
Create a Extension method for FindElement and FindElements, so that it try to get element for a given timeout.
public static void FindElement(this IWebDriver driver, By by, int timeout)
{
if(timeout >0)
{
return new WebDriverWait(driver, TimeSpan.FromSeconds(timeout)).Until(ExpectedConditions.ElementToBeClickable(by));
}
return driver.FindElement(by);
}
public static IReadOnlyCollection<IWebElement> FindElements(this IWebDriver driver, By by, int timeout)
{
if(timeout >0)
{
return new WebDriverWait(driver, TimeSpan.FromSeconds(timeout)).Until(ExpectedConditions.PresenceOfAllElementsLocatedBy(by));
}
return driver.FindElements(by);
}
so your code will use these like this:
var listItems = driver.FindElement(By.Id("odds-data-table"), 30).FindElements(By.TagName("a"),30);
Solution 3:
Handle StaleElementException using an Extension Method:
public static void FindElement(this IWebDriver driver, By by, int maxAttempt)
{
for(int attempt =0; attempt <maxAttempt; attempt++)
{
try
{
driver.FindElement(by);
break;
}
catch(StaleElementException)
{
}
}
}
public static IReadOnlyCollection<IWebElement> FindElements(this IWebDriver driver, By by, int maxAttempt)
{
for(int attempt =0; attempt <maxAttempt; attempt++)
{
try
{
driver.FindElements(by);
break;
}
catch(StaleElementException)
{
}
}
}
Your code will use these like this:
var listItems = driver.FindElement(By.Id("odds-data-table"), 2).FindElements(By.TagName("a"),2);
Use this:
string description = header.FindElement(By.XPath("strong/a")).Text;
instead of your:
string description = header.FindElement(By.TagName("a")).Text;
namespace ABC.ABCManager.UIAutomation.Authorization
{
[TestClass]
public class VerifyCreateUsersSendInvite : BaseTest
{
[TestMethod]
public void VerifySendAnInviteLink()
{
Actions actions = new Actions(driver);
selectAndClickOnCustomerName();
Thread.Sleep(3000);
try
{
//Click Send an Invite link
var LinksOnOverview = driver.FindElements(By.CssSelector(".popupFrameLink.summary-tool-link"));
LinksOnOverview[2].Click();
//Verification point to see "Send an Invite" link has opened by checking "TextName" textbox is present or not by using CSS selector
if (IsElementPresent(By.CssSelector("#FirstName")))
{
ExtentManager.verifySafely(driver.FindElement(By.CssSelector("#FirstName")).TagName, "input", "VerifySendAnInviteLink", "link has opened ", driver);
Console.WriteLine("'Send an Invite' link has opened ");
}
}
catch (Exception ex)
{
driver.Close();
}
}
}
}
In above code,I am clicking link "Send an Invitation" and after that, I am getting exception "Element not found" on the line :
if (IsElementPresent(By.CssSelector("#FirstName")))
.... I am inspecting element by CssSelector. I tried xpath then also same exception I am getting. I am unable to find any other element(including first name) on that pop up.Please suggest me solution. Thanks in advance!!!
Probably you should change frame on which you looking for elements
ReadOnlyCollection<string> windowHandles = driver.WindowHandles;
driver.SwitchTo().Window(windowHandles[1]);
// ELEMENTS on Second frame (window)
driver.SwitchTo().Window(windowHandles[0]);
// ELEMENTS on First Frame
try
{
List<IWebElement> frames = new List<IWebElement>(driver.FindElements(By.TagName("iframe")));
driver.SwitchTo().Frame(1);
//Verification point to see "Send an Invite" link has opened by checking Text Name textbox is present or not by using CSS selector
if (IsElementPresent(By.CssSelector("#FirstName")))
{
ExtentManager.verifySafely(driver.FindElement(By.CssSelector("#FirstName")).TagName, "input", "VerifySendAnInviteLink", "link has opened ", driver);
Console.WriteLine("'Send an Invite' link has opened ");
}
I'm not the first time here with questions like this.
I have a Volvo auto parts catalog that is implemented as a client application to a local database and works only in IE8/9. I need to find and get some positions displayed in IE.
Here's an example of IE output:
It's just a table and nothing more.
And here's what I see in IE9 debug tools:
IE shows me full layout of a page where I can see a target table and rows with the data I need to get.
I wrote a simple class that should walk through all IE tabs and get HTML from the target page:
using System.Globalization;
using System.Text.RegularExpressions;
using SHDocVw;
namespace WebpageHtmlMiner
{
static class HtmlMiner
{
public static string GetWebpageHtml(string uriPattern)
{
var uriRegexPattern = uriPattern;
var regex = new Regex(uriRegexPattern);
var shellWindows = new ShellWindows();
InternetExplorer internetExplorer = null;
foreach (InternetExplorer ie in shellWindows)
{
Match match = regex.Match(ie.LocationURL);
if (!string.IsNullOrEmpty(match.Value))
{
internetExplorer = ie;
break;
}
}
if (internetExplorer == null)
{
return "Target page is not opened in IE";
}
var mshtmlDocument = (mshtml.IHTMLDocument2)internetExplorer.Document;
var webpageHtml = mshtmlDocument.body.parentElement.outerHTML.ToString(CultureInfo.InvariantCulture);
return webpageHtml; //profit
}
}
}
It seems to work fine but instead of what I see in IE debug tools I get HTML code with tons of javascript functions and no data in target table.
Is there any way to get exactly what I see in IE debug tools?
Thanks.
You can get the original source (the one sent by the server) in "Script" tab (this works both on my IE8 and my IE10).
If you do not use AJAX, I think you can right-click on the page and choose Display Souce option too.