What I have to do is read only the second line in a .txt file and save it as a string, to use later in the code.
The file name is "SourceSetting". In line 1 and 2 I have some words
For line 1, I have this code:
string Location;
StreamReader reader = new StreamReader("SourceSettings.txt");
{
Location = reader.ReadLine();
}
ofd.InitialDirectory = Location;
And that works out great but how do I make it so that it only reads the second line so I can save it as for example:
string Text
You can skip the first line by doing nothing with it, so call ReadLine twice:
string secondLine:
using(var reader = new StreamReader("SourceSettings.txt"))
{
reader.ReadLine(); // skip
secondLine = reader.ReadLine();
}
Another way is the File class that has handy methods like ReadLines:
string secondLine = File.ReadLines("SourceSettings.txt").ElementAtOrDefault(1);
Since ReadLines also uses a stream the whole file must not be loaded into memory first to process it. Enumerable.ElementAtOrDefault will only take the second line and don't process more lines. If there are less than two lines the result is null.
Update I'd advice to go with Tim Schmelter solution.
When you call ReadLine - it moves the carret to next line. So on second call you'll read 2nd line.
string Location;
using(var reader = new StreamReader("SourceSettings.txt"))
{
Location = reader.ReadLine(); // this call will move caret to the begining of 2nd line.
Text = reader.ReadLine(); //this call will read 2nd line from the file
}
ofd.InitialDirectory = Location;
Don't forget about using.
Or an example how to do this vi ReadLines of File class if you need just one line from file. But solution with ElementAtOrDefault is the best one as Tim Schmelter points.
var Text = File.ReadLines(#"C:\Projects\info.txt").Skip(1).First()
The ReadLines and ReadAllLines methods differ as follows: When you use
ReadLines, you can start enumerating the collection of strings before
the whole collection is returned; when you use ReadAllLines, you must
wait for the whole array of strings be returned before you can access
the array. Therefore, when you are working with very large files,
ReadLines can be more efficient.
So it doesn't read all lines into memory in comparison with ReadAllLines.
The line could be read using Linq as follows.
var SecondLine = File.ReadAllLines("SourceSettings.txt").Skip(1).FirstOrDefault();
private string GetLine(string filePath, int line)
{
using (var sr = new StreamReader(filePath))
{
for (int i = 1; i < line; i++)
sr.ReadLine();
return sr.ReadLine();
}
}
Hope this will help :)
If you know that your second line is unique, because it contains a specific keyword that does not appear anywhere else in your file, you also could use linq, the benefit is that the "second" line could be any line in future.
var myLine = File.ReadLines("SourceSettings.txt")
.Where(line => line.Contains("The Keyword"))
.ToList();
Related
I am trying to read characters from a file and then append them in another file after removing the comments (which are followed by semicolon).
sample data from parent file:
Name- Harly Brown ;Name is Harley Brown
Age- 20 ;Age is 20 years
Desired result:
Name- Harley Brown
Age- 20
I am trying the following code-
StreamReader infile = new StreamReader(floc + "G" + line + ".NC0");
while (infile.Peek() != -1)
{
letter = Convert.ToChar(infile.Read());
if (letter == ';')
{
infile.ReadLine();
}
else
{
System.IO.File.AppendAllText(path, Convert.ToString(letter));
}
}
But the output i am getting is-
Name- Harley Brown Age-20
Its because AppendAllText is not working for the newline. Is there any alternative?
Sure, why not use File.AppendAllLines. See documentation here.
Appends lines to a file, and then closes the file. If the specified file does not exist, this method creates a file, writes the specified lines to the file, and then closes the file.
It takes in any IEnumerable<string> and adds every line to the specified file. So it always adds the line on a new line.
Small example:
const string originalFile = #"D:\Temp\file.txt";
const string newFile = #"D:\Temp\newFile.txt";
// Retrieve all lines from the file.
string[] linesFromFile = File.ReadAllLines(originalFile);
List<string> linesToAppend = new List<string>();
foreach (string line in linesFromFile)
{
// 1. Split the line at the semicolon.
// 2. Take the first index, because the first part is your required result.
// 3. Trim the trailing and leading spaces.
string appendAbleLine = line.Split(';').FirstOrDefault().Trim();
// Add the line to the list of lines to append.
linesToAppend.Add(appendAbleLine);
}
// Append all lines to the file.
File.AppendAllLines(newFile, linesToAppend);
Output:
Name- Harley Brown
Age- 20
You could even change the foreach-loop into a LINQ-expression, if you prefer LINQ:
List<string> linesToAppend = linesFromFile.Select(line => line.Split(';').FirstOrDefault().Trim()).ToList();
Why use char by char comparison when .NET Framework is full of useful string manipulation functions?
Also, don't use a file write function multiple times when you can use it only one time, it's time and resources consuming!
StreamReader stream = new StreamReader("file1.txt");
string str = "";
while ((string line = infile.ReadLine()) != null) { // Get every line of the file.
line = line.Split(';')[0].Trim(); // Remove comment (right part of ;) and useless white characters.
str += line + "\n"; // Add it to our final file contents.
}
File.WriteAllText("file2.txt", str); // Write it to the new file.
You could do this with LINQ, System.File.ReadLines(string), and System.File.WriteAllLines(string, IEnumerable<string>). You could also use System.File.AppendAllLines(string, IEnumerable<string>) in a find-and-replace fashion if that was, in fact, the functionality you were going for. The difference, as the names suggest, is whether it writes everything out as a new file or if it just appends to an existing one.
System.IO.File.WriteAllLines(newPath, System.IO.File.ReadLines(oldPath).Select(c =>
{
int semicolon = c.IndexOf(';');
if (semicolon > -1)
return c.Remove(semicolon);
else
return c;
}));
In case you aren't super familiar with LINQ syntax, the idea here is to loop through each line in the file, and if it contains a semicolon (that is, IndexOf returns something that is over -1) we cut that off, and otherwise, we just return the string. Then we write all of those to the file. The StreamReader equivalent to this would be:
using (StreamReader reader = new StreamReader(oldPath))
using (StreamWriter writer = new StreamWriter(newPath))
{
string line;
while ((line = reader.ReadLine()) != null)
{
int semicolon = line.IndexOf(';');
if (semicolon > -1)
line = c.Remove(semicolon);
writer.WriteLine(line);
}
}
Although, of course, this would feed an extra empty line at the end and the LINQ version wouldn't (as far as I know, it occurs to me that I'm not one hundred percent sure on that, but if someone reading this does know I would appreciate a comment).
Another important thing to note, just looking at your original file, you might want to add in some Trim calls, since it looks like you can have spaces before your semicolons, and I don't imagine you want those copied through.
I'm making a simple text adventure in C# and I was wondering if it was possible to read certain lines from a .txt file and assign them to a string.
I am aware of how to read all the text from a .txt file but how exactly would I assign the contents of certain lines to a string?
Have you considered the ReadAllLines method?
It returns an array of lines from which you can choose your desired line.
So for eg, if you wish to choose the 3rd line (Assuming you have 3 lines in the file):
string[] lines = File.ReadAllLines(path);
string myThirdLine= lines[2];
Probably the easiest (and cheapest in terms of memory consumption) is File.ReadLines:
String stringAtLine10 = File.ReadLines(path).ElementAtOrDefault(9);
Note that it is null if there are less than 10 lines in the file. See: ElementAtOrDefault.
It's just the concise version of a StreamReader and a counter variable which increases on every line.
As an advanced alternative: ReadLines plus some LINQ:
var lines = File.ReadLines(myFilePath).Where(MyCondition).ToArray();
where MyCondition:
bool MyCondition(string line)
{
if (line == "something")
{
return true;
}
return false;
}
In case you don't want to load all lines atonce
using(StreamReader reader=new StreamReader(path))
{
String line;
while((line=reader.ReadLine())!=null)//process temp
}
Here's a example how you can assign the lines to a string, you can't decide which line is which via fields, you have to select them yourself.
which is the line of the string you want to assign.
For example, you want line one, you define which as one and not zero, you want line eight, you define which with eight.
string getWord(int which)
{
string readed = "";
using (Systen.IO.StreamReader read = new System.IO.StreamReader("PATH HERE"))
{
readed = read.ReadToEnd();
}
string[] toReturn = readed.Split('\n');
return toReturn[which - 1];
}
I need some assistance, I am writing a method to read a text file, and if any exception occurs I append a line to the text file. e.g "**"
So what I need to know is how can I check for that specific line of text in the text file without reading every line of the text file, like a peek method or something.
Any help would be appreciated.
Thanks in advance.
You can use File.ReadLines in combination with Any:
bool isExcFile = System.IO.File.ReadLines(path).Any(l => l == "**");
The ReadLines and ReadAllLines methods differ as follows: When you use
ReadLines, you can start enumerating the collection of strings before
the whole collection is returned; when you use ReadAllLines, you must
wait for the whole array of strings be returned before you can access
the array. Therefore, when you are working with very large files,
ReadLines can be more efficient.
I have found a solution, the line I have appended to the file will always be the last line in the file, so I created a method to read the last line. See below:
public string ReadLastLine(string path)
{
string returnValue = "";
FileStream fs = new FileStream(path, FileMode.Open);
for (long pos = fs.Length - 2; pos > 0; --pos)
{
fs.Seek(pos, SeekOrigin.Begin);
StreamReader ts = new StreamReader(fs);
returnValue = ts.ReadToEnd();
int eol = returnValue .IndexOf("\n");
if (eol >= 0)
{
fs.Close();
return returnValue .Substring(eol + 1);
}
}
fs.Close();
return returnValue ;
}
You will need to maintain a separate file with indexes (such as comma delimited) of where your special markers are. Then you can only read those indexes and use the Seek method to jump to that point in the filestream.
If your file is relatively small, let's say <50MB this is an overkill. More than that you can consider maintaining the index file. You basically have to weigh the performance of an extra IO call (that is reading the index file) with that of simply reading from the filestream each line.
From what I understand you want to process some files and after the processing find out which files contain the "**" symbol, without reading every line of the file.
If you append the "**" to the end of the file you could do something like:
using (StreamReader sr = new StreamReader(File.OpenText(fileName)))
{
sr.BaseStream.Seek(-3, SeekOrigin.End);
string endToken = sr.ReadToEnd();
if (endToken == "**\n")
{
// if needed, go back to start of file:
sr.BaseStream.Seek(0, SeekOrigin.Begin);
// do something with the file
}
}
I am using C#.net
How can read a text file block by block, the block is separated by new line character.
Block size is not fixed, so i am not able to use ReadBlock method of StreamReader.
Is there any ohter method for getting the data block by block as it is separated by new line character.
You could use a StreamReader:
using (var reader = File.OpenText("foo.txt"))
{
string line;
while ((line = reader.ReadLine()) != null)
{
// do something with the line
}
}
This method reads the text file line by line (where Environment.NewLine is used as line separator) and has only the current line loaded in memory at once so it could be used to read very large files.
If you just want to load all the lines of a small text file in memory you could also use the ReadAllLines method:
string[] lines = File.ReadAllLines("foo.txt");
// the lines array will contain all the lines
// don't use this method with large files
// as it loads the entire contents into memory
You can look at StreamReader.ReadToEnd() and String.Split()
use:
string content = stream.ReadToEnd();
string[] blocks = content.Split('\n');//You may want to use "\r\n"
You could use the File.ReadLines method
foreach(string line in File.ReadLines(path))
{
//do something with line
}
ReadLines returns an IEnumerable<string> so only one line is stored in memory at once.
Something like:
using (TextReader tr = new StreamReader(FullFilePath))
{
string Line;
while ((Line = tr.ReadLine()) != null)
{
Line = Line.Trim();
}
}
Funny I was doing some file i/o the other day, and found this which was very useful at processing large delimited record text files (e.g. converting a record to a pre-defined type which you define yourself)
I'm trying to read in a text file in a c# application, but I don't want to read the first two lines, or the last line. There's 8 lines in the file, so effectivly I just want to read in lines, 3, 4, 5, 6 and 7.
Is there any way to do this?
example file
_USE [Shelley's Other Database]
CREATE TABLE db.exmpcustomers(
fName varchar(100) NULL,
lName varchar(100) NULL,
dateOfBirth date NULL,
houseNumber int NULL,
streetName varchar(100) NULL
) ON [PRIMARY]_
EDIT
Okay, so, I've implemented Callum Rogers answer into my code and for some reason it works with my edited text file (I created a text file with the lines I didn't want to use omitted) and it does exactly what it should, but whenever I try it with the original text file (above) it throws an exception. I display this information in a DataGrid and I think that's where the exception is being thrown.
Any ideas?
The Answer by Rogers is good, I am just providing another way of doing this.
Try this,
List<string> list = new List<string>();
using (StreamReader reader = new StreamReader(FilePath))
{
string text = "";
while ((text = reader.ReadLine()) != null)
{
list.Add(text);
}
list.RemoveAt(0);
list.RemoveAt(0);
}
Hope this helps
Why do you want to ignore exactly the first two and the last line?
Depending on what your file looks like you might want to analyze the line, e.g. look at the first character whether it is a comment sign, or ignore everything until you find the first empty line, etc.
Sometimes, hardcoding "magic" numbers isn't such a good idea. What if the file format needs to be changed to contain 3 header lines?
As the other answers demonstrate: Nothing keeps you from doing what you ever want with a line you have read, so of course, you can ignore it, too.
Edit, now that you've provided an example of your file: For your case I'd definitely not use the hardcoded numbers approach. What if some day the SQL statement should contain another field, or if it appears on one instead of 8 lines?
My suggestion: Read in the whole string at once, then analyze it. Safest way would be to use a grammar, but if you presume the SQL statement is never going to be more complicated, you can use a regular expression (still much better than using line numbers etc.):
string content = File.ReadAllText(filename);
Regex r = new Regex(#"CREATE TABLE [^\(]+\((.*)\) ON");
string whatYouWant = r.Match(content).Groups[0].Value;
Why not just use File.ReadAllLines() and then remove the first 2 lines and the last line? With such a small file speed differences will not be noticeable.
string[] allLines = File.ReadAllLines("file.ext");
string[] linesWanted = new string[allLines.Length-3];
Array.Copy(allLines, 2, linesWanted, 0, allLines.Length-3);
If you have a TextReader object wrapping the filestream you could just call ReadLine() two times.
StreamReader inherits from TextReader, which is abstract.
Non-fool proof example:
using (var fs = new FileStream("blah", FileMode.Open))
using (var reader = new StreamReader(fs))
{
reader.ReadLine();
reader.ReadLine();
// Do stuff.
}
string filepath = #"C:\whatever.txt";
using (StreamReader rdr = new StreamReader(filepath))
{
rdr.ReadLine(); // ignore 1st line
rdr.ReadLine(); // ignore 2nd line
string fileContents = "";
while (true)
{
string line = rdr.ReadLine();
if (rdr.EndOfStream)
break; // finish without processing last line
fileContents += line + #"\r\n";
}
Console.WriteLine(fileContents);
}
How about a general solution?
To me, the first step is to enumerate over the lines of a file (already provided by ReadAllLines, but that has a performance cost due to populating an entire string[] array; there's also ReadLines, but that's only available as of .NET 4.0).
Implementing this is pretty trivial:
public static IEnumerable<string> EnumerateLines(this FileInfo file)
{
using (var reader = file.OpenText())
{
while (!reader.EndOfStream)
{
yield return reader.ReadLine();
}
}
}
The next step is to simply skip the first two lines of this enumerable sequence. This is straightforward using the Skip extension method.
The last step is to ignore the last line of the enumerable sequence. Here's one way you could implement this:
public static IEnumerable<T> IgnoreLast<T>(this IEnumerable<T> source, int ignoreCount)
{
if (ignoreCount < 0)
{
throw new ArgumentOutOfRangeException("ignoreCount");
}
var buffer = new Queue<T>();
foreach (T value in source)
{
if (buffer.Count < ignoreCount)
{
buffer.Enqueue(value);
continue;
}
T buffered = buffer.Dequeue();
buffer.Enqueue(value);
yield return buffered;
}
}
OK, then. Putting it all together, we have:
var file = new FileInfo(#"path\to\file.txt");
var lines = file.EnumerateLines().Skip(2).IgnoreLast(1);
Test input (contents of file):
This is line number 1.
This is line number 2.
This is line number 3.
This is line number 4.
This is line number 5.
This is line number 6.
This is line number 7.
This is line number 8.
This is line number 9.
This is line number 10.
Output (of Skip(2).IgnoreLast(1)):
This is line number 3.
This is line number 4.
This is line number 5.
This is line number 6.
This is line number 7.
This is line number 8.
This is line number 9.
You can do this:
var valid = new int[] { 3, 4, 5, 6, 7 };
var lines = File.ReadAllLines("file.txt").
Where((line, index) => valid.Contains(index + 1));
Or the opposite:
var invalid = new int[] { 1, 2, 8 };
var lines = File.ReadAllLines("file.txt").
Where((line, index) => !invalid.Contains(index + 1));
If you're looking for a general way to remove the last and the first 2, you can use this:
var allLines = File.ReadAllLines("file.txt");
var lines = allLines
.Take(allLines.Length - 1)
.Skip(2);
But from your example it seems that you're better off looking for the string pattern that you want to read from the file. Try using regexes.