Related
I am using Visual Studio 2012 and it was working all fine until I started observing some funny behavior. When I open my code it shows red Underlines which we usually see when there is an error in our code. Surprisingly, the code compiles all fine. I have made following observations that are not normal at all.
Red underlines in the code
While cleaning or building the solution no error.
Red underlines go away for some time after I build/clean the solution, but they come back eventually.
Because of this, my IntelliSense stopped working.
I can not right click on any component and go to its definition.
Any ideas?
Visual Studio 2017, Visual Studio 2019, Visual Studio 2022:
Closing Visual Studio and removing the .vs folder located in the solution directory worked for my C# projects.
This folder has a hidden attribute. You may need to change View settings to show hidden files in File Explorer.
Delete the contents of the temporary ASP.NET folder and then rebuild. It'll either be in your user folder (for IIS Express - \AppData\Local\Temp\Temporary ASP.NET Files) or the Windows directory (for IIS - C:\Windows\Microsoft.Net\Framework\vx.xx\Temporary ASP.NET Files)
Paths are off the top of my head and may not be correct
For me, this issue got fixed when I unloaded and reloaded the project again.
I had this issue and it was related to ReSharper.
Solution steps for me:
Disable ReSharper
VisualStudio\Tools\Options\ReSharper Ultimate\General\Suspend Now
Build Solution
(Ctrl + Shift + B)
Re-enable ReSharper
VisualStudio\Tools\Options\ReSharper Ultimate\General\Resume Now
Just had this problem while working with a solution created in Visual Studio 2012 but running in 2013. I closed Visual Studio, deleted all \bin and \obj directories and the problem was gone.
I had this problem after resolving some conflicts from Subversion (SVN). The solution has several projects in it and I resolved some conflicts in a few different projects. I did a menu Build → Clean Solution followed by a men Build → Rebuild Solution and everything was good again.
Do you have any plugins installed, like ReSharper? I had an issues with a bad plugin.
Try running Visual Studio in safe mode, to prevent plugins from running.
devenv /Safemode
If you are using ReSharper like me, you may delete ReSharper cache following by this link: Configure Caches
To specify the location for caches:
Open the Environment → General page of ReSharper options.
Use the Save solution caches in to select the location for cache files:
User local settings folder to store them in the following directory: %LOCALAPPDATA%\JetBrains\Transient
4.System TEMP folder to store them in the following directory: %TEMP%\ReSharperCache
Solution folder to store them in the root folder of the current solution
Custom folder to choose a custom location for ReSharper cache files.
Click Save to apply the modifications and let ReSharper choose where to save them, or save the modifications to a specific settings layer using the Save To drop-down list. For more information, see managing and sharing ReSharper settings.
Reopen your solution for the changes to take effect.
What works for me is deleting the IntelliSense indexfile.
The IntelliSense-file is in the same directory as you solution.
It's filename is SolutionName.sdf
Just delete this file, open you solution again, and IntelliSense will start rebuilding its indexfile. After that the problem will be gone.
In Visual Studio 2013 I solved this problem by deleting all of my obj and bin folders across all projects. The issue was probably due to solution configurations that I had deleted, but I hadn't been cleaned up properly, as doing a menu Build → Clean Solution doesn't remove the old outputs from the obj and bin folders.
This worked for me in Visual Studio Enterprise 2017:
Navigate to Tools > Options > Text Editor > JavaSCript/TypeScript > Linting > General
deselect "Enable ESLint"
I've run into this as well and was able to return Visual Studio to its normal state by doing the following -
Identify the project where the red lined code comes from
Remove the "red line" project from the references where it is being used (ProjectName\References - right click, add references, and uncheck the "red line" project)
Build (you should get errors now)
Readd the project reference that was just removed
Build again
The red lines should be removed and the project should build!
Steps that work
Open the solution and do a rebuild all
Close the solution
Open solution and do a clean
Close solution
Open solution and do a rebuild all
Close and then open the solution. It should be good. This works for me every time
Be careful deleting some of these settings files as you will lose saved debug settings, etc. And it may do more damage than you realize.
I have found recently it is easy to solve this by switching from Debug to Release in the dropdown to left of the Play Button. Then switching back from Release to Debug.
I had the same problem with lots of red lines in several *cpp source files. Though the code compiled perfectly. None of the other solutions worked for me.
Changing the order of #include lines of a *.cpp-file could make the red lines disappear - and reappear with the restored order.
Then I noticed a header file was included twice in a single *.cpp file. I removed the second one and - everything was fine.
Including a header file twice in the same *.cpp file seems to be no problem to the compiler but to the IntelliSense part.
Simply refresh the project/solution. It will get resolved.
I ran into this problem with the latest Visual Studio 2017.
Also the debug version of my program was running painfully slow.
I deleted the Solution file .sln and created a new one.
I had a similar problem when I was seeing lot of red squiggles in a couple of files. I tried all answers proposed previously, but nothing seemed to work.
The moment I started browsing through the classes, structures in other files for which complaining files had references, the problem disappeared. It seemed IntelliSense was not able to resolve dependencies on its own for some reason.
For me, I had at one time enabled fusion logging to debug some assembly dependency errors (fuslogvw from a CMD prompt). That was months ago and I had been experiencing much slower build times (5-7 minutes) since then.
I had also forgotten entirely that I had left them enabled. These logs were my bottleneck and disabling them has made iterating much faster.
In my case with Visual Studio 2017, I have many "red lines" shown below all symbols defined in a third-party library, but my project can actually build without problems. I have tried all suggested solutions (like delete the .VS folder, restart Visual Studio, etc.), but none of them working.
Finally, I fixed it and this is how: I open my application project's property page, then go to C/C++ → General → Additional Include Directories, which is the place I put all needed third-party library header paths.
I delete all the path (but save them somewhere), click "Ok" to confirm. Then I come back to the same setting, paste those paths back, click "Ok" to confirm, and then all those "red lines" disappear.
I have VS2019 with ReSharper, and ran into this issue.
What worked for me was:
Go to the ReSharper >> Options menu
Go to the General tab (should be the default)
Press the "Clear caches" button
Close all instances of Visual Studio (2019)
Restart Visual Studio
Using VS2022 without Resharper when this problem occurred, tried several things, this did help me in the end:
Close Visual Studio
Delete folder .vs in the Solution folder
Go to folder %USERPROFILE%\AppData\Roaming\Microsoft\VisualStudio\
Delete all folders whose names start with 17.
Reopen Visual Studio
More specific subfolders could exist that might be enough to delete, but I had no issues after deleting all of it. AFAIK these only contains user session data, temporary files and/or cache files that can be downloaded again or recreated as needed.
Found this solution:
Close Visual Studio (ensure devenv.exe is not present in the Task Manager).
Delete the %USERPROFILE%\AppData\Local\Microsoft\VisualStudio\xx\ComponentModelCache directory.
Restart Visual Studio.
I have had this problem for months and have finally fixed it. Closing Visual Studio and removing the .vs folder located in the solution directory did not work for me.
There was an assemblyIdentity tag in the web.config file which was referencing a library that was not in my references folder. I removed this tag, cleaned, closed and reopened, and the problem was fixed.
Check each of the assemblyIdentity tags in your web.config file and check them against the references folder in solution explorer
Remove any assemblyIdentity tags, including the parent dependentAssembly tag for any which aren't listed in your references folder.
Clean the solution
Close and reopen the solution
Deleting .vs folder did the trick for me.
for me this works:-
Open the Command Palette ctrl+⇧+p
Then type: reload Window.
Deleting all the folders which start with "asp.xxx" worked for me. You can reach these folders by:
(C:\Windows\Microsoft.Net\Framework\vx.xx\Temporary ASP.NET Files)
Hover over the word that has the red underline squibble. A mini dialog box will appear. Click on 'Quick fix' and then click on 'Disable error squibble'.
I have a WebApplication which contains reference to WCF services.
While building using Visual Studio 2010, Build fails without any error or warning. However building the .csproj using MsBuild is successful.
Can't figure out what should I try in Visual Studio, to resolve / diagnose the issue. Can you please help out?
I find out that the build has been failing,
From text displayed in status Bar.
From output window:
========== Build: 0 succeeded or up-to-date, 1 failed, 0 skipped ==========
The output tab includes configuration details.
------ Build started: Project: <projectName here> Configuration: Debug Any CPU
I noticed that if "Build + Intellisense" is selected in the Error List, it causes the error messages to be swallowed.
Change this option to "Build Only", and all error messages will be displayed:
I don't know if this is a bug in Visual Studio or what, but it certainly revealed hidden error messages that were the key to pinpointing the failure for me.
Some, like Richard J Foster, have suggested increasing the "MSBuild project build output verbosity" setting to "Diagnostic" (the highest possible option), but this didn't solve the problem for me, as Visual Studio appeared to be suppressing the error message(s) themselves.
As an alternative, you may try to use the raw output messages from the "Output" tab, which haven't been filtered by Visual Studio. Either do an in-place search for the strings "error" and/or "failed", or copy all of the output to your favorite text editor and do a search there.
To ensure that the Output window appears each time you do a build, you can go to Tools → Options → Projects and Solutions → General, and ensure that the option "Show Output Window when build starts" is checked.
As an additional troubleshooting step, it is also possible to build the project from the PowerShell command line by running dotnet build. This will show you the complete build output, including any errors that Visual Studio may be hiding.
I just ran into a similar situation. In my case, a custom action (from the MSBuildVersioning package available on Nuget.org - http://www.nuget.org/packages/MSBuildVersioning/) which appeared in the csproj file's BeforeBuild target was failing without triggering any error message in the normal place.
I was able to determine this by setting the "MSBuild project build output verbosity" (in the latest Visual Studio's Tools tab [Path: Tools > Options > Build and Run]) to "Diagnostic" as shown below. This then showed that the custom action (in my case HgVersionFile) was what had failed.
Here are some things that you can try:
If your solution contains more than one project, try building each project one at a time. (You may even want to try opening each project independently of the solution.)
If applicable, ensure that all of your projects (including dependencies and tests) target the same version of the .NET Framework. (Thanks to user764754 for this suggestion!)
Tip: Check Tools → Extension and Updates to ensure that your packages are up-to-date.
Ensure that all dependency projects are built to target the same platform as your main project.
Try restarting Visual Studio.
As suggested by Bill Yang, try running Visual Studio as Administrator, if you aren't already. (If you are already running Visual Studio as Administrator, perhaps try the opposite?)
Try restarting your computer.
Try "Rebuild All".
Run "Clean Solution", then remove your *vspscc* and *vssscc* files, restart Visual Studio, and then "Rebuild All".
As suggested by Andy, close Visual Studio, delete the .suo file, and restart Visual Studio.
As suggested by Arun Prasad E S, close Visual Studio, delete the .vs folder in your solution directory, and then re-open Visual Studio. (This folder is auto-generated by Visual Studio and contains cache, configuration settings, and more. More details can be found in these questions: Visual Studio - Deleting .vs folder and https://stackoverflow.com/q/48897191.)
As suggested by MrMalith, close Visual Studio, delete the obj folder in your solution directory, clear your temporary folder, and then re-open Visual Studio.
Delete the hidden .vs folder & restart Visual Studio. That worked for me.
I want to expand on Sasse's answer. I had to target the correct version of .NET to resolve the problem.
One project was giving me an error:
"The type or namespace name 'SomeNamespace' does not exist in the namespace 'BeforeSomeNamespace' (are you missing an assembly reference?)".
There was no error in the Error List window but the assembly had a yellow warning sign under "References".
I then saw that the referencing project targeted 4.5.1 and the referenced project 4.6.1. Changing 4.6.1 to 4.5.1 allowed the overall build to succeed.
Nothing was working for me so I deleted the .suo file, restarted VS, cleaned the projected, and then the build would work.
I tried many things like restarting Visual Studio, cleaning and rebuilding the solution, restarting the PC, etc., but none of them worked for me. I was finally able to solve the problem by doing the following:
First of all, make sure all the projects in your solution (including tests) are targeting the same .NET version. Then:
Save pending changes in the project and close Visual Studio
Find the exact location from file explorer and find "obj" file and open it,
Then, delete all the included files (some files won't remove, it doesn't matter, just skip them).
Use run command (by pressing Windows Key + R) and type "%temp%" and press enter to find temporary files.
Finally, delete them all.
On other possibility is that Visual Studio needs to run as Administrator, this might be related to deploying to local IIS server or other deployment need.
Just for the sake of completion and maybe helping someone encountering the same error again in the future, I was using Mahapps metro interface and changed the XAML of one window, but forgot to change the partial class in the code-behind. In that case, the build failed without an error or warning, and I was able to find it out by increasing the verbosity of the output from the settings:
In my case (VS 2019 v16.11.20), disabling Text Editor->C#->Advanced->Enable 'pull' diagnostics in the options solved the issue.
Double check for _underscore.aspx pages in your project.
I had a page and code-behind:
`myPage.aspx` and `myPage.aspx.vb`
when building the project, I'd get errors on the .aspx.vb page stating that properties defined on the .aspx page didn't exist, even though the page itself would build fine and there were NO OTHER ERRORS showing in the output (even with diagnostic level build output).
I then came across a page in the project that was named the same thing but with an underscore: _myPage.aspx - not sure where it came from, I deleted it, and the solution built fine.
Any changes I make to my code aren't doing anything. I've even tried putting lines in that I know will crash my program, and nothing. It just keep running the old version. It's even loading old versions of files I've edited and saved.
There a 3 projects in my solution. 2 are pure C#. 1 is a WinForms application.
It sometimes happens that some files "are being used by another process".
Close your solution and delete all "bin" and "obj" subfolders of all your projects that are included in the solution.
Then open your solution again, execute "Clean solution" and build it again.
Check this setting in Tools/Options, then under Projects and Solutions>Build and Run.
On Run, when build or deployment errors occur:
My personal preference is for this value to be 'Do not launch'. It will prevent Visual Studio from launching the "last successful build".
Try Ctrl+Shift+B. This will build your solution (not just a particular project). Other environments might build when you save but this needs to be explicit in Visual Studio.
Had issue with saving code changes on VS2017 (mac) Version 7.3 Preview (7.3 build 740)
Only way to get file changes to save was to do File > Save All
Doing File>Save would act like the file saved. But, when I opened the file again and no changes were saved.
Ok, you need to add more detail, but you may want to have a look at this answer:
How to enable/disable compile errors warning in Visual Studio
delete Published DLL From Bin
file names -
projectName.ddl
projectName.pdb
delete these two files and run project
I had the same problem (Visual studio 2015 is not noticing my modifications in C# XAML files).
Problem solved by deleting 2 'debug' subfolders. One in the bin folder and one in the obj folder.
I met the same problem. the code changes is not saved.(you can see from the edit it is in Yellow color. e.g. indicating changes). SAVE and BUILD will not let it save the changes. i have to wait sometime, then it could possibly save success..
Deleting the whole project and the corresponding folder from local and check out the solution again. This worked for me=> VS2017
I solved the problem like this:
1. I closed the program
2. I opened the folder that contains the file (.csproj) and opened it with Visual Studio.
Next, I chose the folder to run the command as in the image
Had the same problem. Turns out I had moved a project folder. Even when opening the solution from the moved folder and editing and saving this source code, VS 2019 was building and running a different instance of the program with the same name. Go to File-> Save yourproject.cs as..and manually walk back through the directory structure to find the instance VS is actually running. Hope this helps.
also check another option in Tools>Build and Run>Only build startup project & dependencies if you have more than 1 nested dependency, especially when using Prism or any other reflection-based frameworks that prevent "dependency detection". Also, make sure you're in the editor when using shortcuts like Ctrl+S (Save) or Ctrl+Shift+S (Save all)
Go to this location:
C:\Users\<your_system>\AppData\Local\Microsoft\VisualStudio\<studio_version>
Then remove all files and start Visual Studio.
this was the error , no changes made after build.
This is driving me crazy.
I have a rather large project that I am trying to modify. I noticed earlier that when I typed DbCommand, visual studio did not do any syntax highlighting on it, and I am using using System.Data.Common.
Even though nothing was highlighted, the project seemed to be running fine in my browser. So I decided to run the debugger to see if things were really working as they should be.
Every time the class that didn't do the highlighting is called I get the "the source file is different from when the module was built" message.
I cleaned the solution and rebuilt it several times, deleted tmp files, followed all the directions here Getting "The source file is different from when the module was built.", restarted the web server and still it tells me the source files are different when they clearly are not.
I cannot test any of the code I have written today because of this.
How can the source be different than the binary when I just complied
it?
Is there any way to knock some sense into visual studio, or am
I just missing something?
I got this issue running a console app where the source that was different was the source that had the entry-point (static void Main). Deleting the bin and obj directories and doing a full rebuild seemed to correct this, but every time I made a code change, it would go out-of-date again.
The reason I found for this was:
I had checked "Only build startup projects and dependencies on Run" (Tools -> Options -> Projects and Solutions -> Build and Run)
In Configuration Manager, my start-up project didn't have "Build" checked
(For #2 -> accessible via the toolbar under the 'Debug/Release' drop down list.)
I was just having this same problem, my projects were all in the same solution so they were using Project to Project references, so as one changed the others should have been updated. However it was not the case, I tried to build, rebuild, close VS2010, pulled a new copy from our source control. None of this worked, what I finally ended up trying was right clicking on the project and rebuilding each project individually. That updated the .dlls and .pdb files so I could debug through.
The issue here is that your dll and or your pdb files are not in sync.
Follow these steps
Just delete the bin directory from the project where the DLL is generated.
Re-build the project.
Remove reference from the project that make reference to the DLL.
Include again the reference.
Enjoy.
In addition to these answers I had the same issue while replacing new DLLs with old ones because of the wrong path. If you are still getting this error you may not refer the wrong path for the DLLs. Go to IIS manager and click the website which uses your DLLs. On the right window click Advanced Settings and go to path of the Physical Path folder on File Explorer and be sure that you are using this folder to replace your DLLs.
Some things for you to check:
Have you double checked your project references?
Do you have a Visual Studio started web server still running? Check the system tray and look for a page with a cog icon (you may have more than one):
(source: msdn.com)
Right click and close/exit it. You may have more than one. Can you debug your changes now?
Are you running the debug version but have only built the release version (or vice versa)?
Did the compile actually succeed? I know I've clicked through the "there were errors, do you want to continue anyway?" message a couple of times without realising.
With web services, the problem can be caused by using the Visual Studio "View in Browser" command. This places the service's DLL and PDB files in the bin and obj folders. When stepping into the web service from a client, somehow Visual Studio uses the PDB in the bin (or obj) folder, but it uses the DLL in the project's output build folder. There are a couple workarounds:
Try deleting the DLL and PDB files in the web service bin and obj files.
Try clicking "View in Browser" in Visual Studio.
If you previously got the source file mismatch error, Visual Studio might have added the filename to a black list. Check your solution properties. Choose "Common Properties -> Debug Source Files" on the left side of the dialog box. If your web service source files appear in the field "Do not look for these source files", delete them.
Unload the project that has the file that is causing the error.
Reload the project.
Fixed
I just had this issue.
I tried all the above, but only this worked:
delete the .pdb file for the solution.
delete the offending .obj files (for the file being reported out of sync)
build the solution.
This fixed the issue for all builds moving forward for me.
In Visual Studio 2017 deleting the hidden .vs folder in the resolved this issue for me.
This is how I fixed the problem in Visual Studio 2010:
1) Change the 'Solutions Configurations' option from "Debug" to "Release"
2) Start debugging
3) Stop debugging and switch the 'Solutions Configurations' option back to "Debug"
This worked for me. Step 3 is optional - it was working fine when I changed it to "Release" but I wanted to change it back.
My solution:
I had included an existing project from a different solution in a new solution file.
I did not notice that when the existing project was rebuilt, it was putting the final output into the NEW solution's output directory. I had a linker path defined to look into the OLD solution's output directory.
Switching my project to search in the new solution's output directory fixed this issue for me.
I had this problem, and it turns out I was running my console application as a windows application. Switching the output type back to console fixed the issue.
I had the same problem. To fix it I used the "Release Mode" to debug in VS2013. Which is sufficient for me, because I'm working in a node js\c++ addon.
My problem was that I had two projects in my solution. The second one was a test project used to call the first one. I had picked the path to the references from the bin folder's release folder.
So whenever I made a change to the first project's code and rebuilt it, it would update the dlls in the debug folder but the calling project was pointing to the release folder, giving me the error, "the source file is different from when the module was built."
Once I deleted the reference to the main project's dll in the release folder and set it to the dll in the debug folder, the issue went away.
In my case, the #Eliott's answer doesn't work.
To solve this problem I had Exclude/Include From Project my deficient file, andalso Clean and Rebuild the solution.
After these actions, my file with my last modifications and the debugger are restored.
I hope this help.
solution:-
the problem is:-
if your some projects in a solution , refer to some other projects,
then sometimes the dll of some projects, will not update automatically, whenever you build the solution,
some projects will have previous build dlls, not latest dlls
you have to go manually and copy the dll of latest build project into referenced project
I was using Visual Studio 2013 and I had an existing project under source control.
I had downloaded a fresh copy from source control to a new directory.
After making changes to the fresh copy, when building I received the error in question.
My solution:
1) Open Documents\IISExpress\config\applicationhost.config
2) Update virtualDirectory node with directory to the fresh copy and save.
My problem was that I had a webservice in the project and I changed the build path.
Restoring the default build path solved my issue.
I had this same problem and I followed the majority of the guidance in the other answers posted here, nothing seemed to work for me.
I eventually opened IIS and recycled the application pool for my web application. I have IIS version 8.5.9600, I right-clicked my web application, then: Deploy > Recycle > Recycle application pool > OK.
That seems to have fixed it, breakpoints now being hit as expected. I think that doing this along with deleting the bin and obj folders helped my situation.
Good luck!
I know this is an old question but I just had the same problem and wanted to post here in case it helps someone else. I got a new computer and the IT dept merged my old computer with the new one. When I set up TFS, I mapped a different local path than what I was previously using, to an additional internal drive. The old path still existed from the merged data on my hard drive so I could still build and run. My IIS paths were also pointing to the old directory. Once I updated IIS to the correct path, I was able to debug just fine. I also deleted the old directory for good measure.
I also experienced that. I just open the obj folder on the project and then open the debug folder delete the .pdb file and that's all.
This error also happens if you try to make changes to a source file that is not part of the project.
I was debugging a method from a .dll of another one of my projects, where Visual Studio had quite helpfully loaded the source because the .dll had been built on the same machine and it knew the path to the source. Obviously, changing such a file isn't going to do anything unless you rebuild the referenced project.
Delete all breakpoints.
Rebuild.
Done
At Visual Studio 2015, using C++, what fixed for me the the source file is different from when the module was built problem was
restart Visual Studio.
Check if the location you pointed to using mex() in Matlab is correct (contains lib and obj files which are modified to the last date you compiled the library in Visual studio).
If this is not the case:
Make sure you are compiling Visual studio in a mode that saves .lib files :
properties -> Config properties -> General -> Config type -> static library
properties -> Config properties -> General -> Target extension=.lib (instead of exe)
Make sure the output and intermediate directories match the Matlab directory in
properties -> Config properties -> General -> Output directory
properties -> Config properties -> General -> Intermediate directory
I get this issue when debugging sometimes w/ Visual Studio but when the application is served by IIS. (we have to develop in this form for some complicated reasons that have to do with how the original developer setup this project.)
When I change the file and rebuild, that fixes it a lot of the time. I know that sounds silly, but I was just trying to debug some code to see why it's doing something weird when I haven't changed it in a while, and I tried a dozen things from this page, but it was fixed just by changing the file..
In my case, the problem was that the debugger exe path was pointing to a net5.0 bin folder. I am using net6.0, so I should've updated the exe path back when I updated the target framework. Works fine now.
Debug-> start without debugging.
This option worked for me. Hope this helps!
I have a project in C# and I get this error every time I try to compile the project:
(Unable to copy file "obj\Debug\Project1.exe" to "bin\Debug\Project1.exe". The process cannot access the file 'bin\Debug\Project1.exe' because it is being used by another process.)
So I have to close the process from the task manager. My project is only one form and there is no multi-threading.
What is the solution (without restarting VS or killing the process)?
This should work.
Go to your project properties.
Inside Build Events, under Pre-build event command line, add these two lines of code:
if exist "$(TargetPath).locked" del "$(TargetPath).locked"
if exist "$(TargetPath)" if not exist "$(TargetPath).locked" move "$(TargetPath)" "$(TargetPath).locked"
#Udpate: Since the time I was first posting this 'answer', I tend to another explanation to the problem. The issue since than happened more and more often outside of Visual Studio also - while trying to copy an .exe file from one folder to another. While in the first place Windows did not allow to copy(!) an .exe file (it was first asking me for administrative rights but refused to copy it afterwards anyway) it still showed up in the explorer. But after a while - without any further action taken, it disappeared magically. Just like the problem in the question always seems to solve itself after a while. So i assume, the problem is more related to a delayed deletion of the project output file and less a buggy VS. I apologize for any unjustified suspicion. :|
This gives the search for a solution a complete different direction, I guess. Did find that link and will update on any progress:
https://superuser.com/questions/234569/windows-7-delayed-file-delete
========================================================================
This is a known bug in VS. I discovered it very often - mostly in VS2010 (with/without SP1). Several "solutions" are recommended. Some of them, which kind of helped for me:
Delete the .suo file in your project dir. Eventually need to create your whole solution from scratch.
Close any Windows Form Designers may remain open.
Use a prebuild script, which deletes the target from the output dir.
Disable the VS hosting process.
None of these really fixes the bug. But it may brings the VS back to a usable state - until a true solution is provided by MS (if ever will).
http://social.msdn.microsoft.com/Forums/en/vsdebug/thread/cea5e4b2-5b33-453c-bffb-8da9f1a1fa4a
http://social.msdn.microsoft.com/Forums/en/vbide/thread/cd12f3c7-de96-4353-adce-23975e30933f
I can confirm this bug exists in VS 2012 Update 2 also.
My work-around is to:
Clean Solution (and do nothing else)
Close all open documents/files in the solution
Exit VS 2012
Run VS 2012
Build Solution
I don't know if this is relevant or not, but my project uses "Linked" in class files from other projects - it's a Silverlight 5 project and the only way to share a class that is .NET and SL compatible is to link the files.
Something to consider ... look for linked files across projects in a single solution.
This is happening because [yourProjectName].exe process is not closing after finishing debugging.
There are two solutions to this problem.
Every time you make change to application, Go to Task Manager -> Processes -> [yourProjectName].exe, end this process. You have to end this process every time you make changes to system.
Add a exit button in your application to exit window and add these line to click event
System.Diagnostics.Process.GetCurrentProcess().Kill();
Application.Exit();
If you look in the obj directory, and you don't see your .exe, it's possible that Avast! or other antivirus is deleting it. I would actually see the .exe show up and then disappear. As soon as I turned off Avast!, problem solved.
VS2010 throwing "Could not copy the file "obj\x86\Debug\[file].exe" because it was not found."
The real problem isn't the error you're getting; it's that the application isn't cleaning up after itself.
It's either holding on to references, not freeing resources, or something else that's causing the process to not end when it's being told to close. Fix up that issue and this problem will resolve itself. We can't really help you with that unless you post your code (and at this point, if you need help with that, you should start a new question).
I had to go into windows explorer and delete the bin/debug folder as well as the obj/debug folders. Then I cleaned & rebuilt the project.
Close your project
Delete bin folder
i find it work, :)
Rename the assembly to a different name to solve this issue.
After seeing a similar error in visual studios 2012 out of no where. I have found that that going to the root folder of the project and right clicking on it I unchecked read only and this error went away. Apparently TFS sometimes will made a folder read only. Hopefully this will help anyone with a similar issue. Thanks
This happened to me at VS 2010 and Win 7..
Case :
I can not Rebuild with Debug Configuration manager, but I can rebuild with Release Configuration manager
What I have tried:
Check my account type at control panel - user account --> My Account is Administrator
Set the bin folder not read only
Add security at bin folder to Everyone
stop the iis server
Stop antivirus, check ridiculous running program using task manager and ProcessExplorer
run VS as administrator
If All that way is still not working.
Then, the last way to try:
close solution
close visual studio
start - shutdown
press power button to turn on the computer
login to your account which has administrator previlege at user type
reopen solution
rebuild
that way working. All people call this way as Reset Computer
Mine got solved by:
Clean solution
Close all processes depending on VS (Current instances).
Rebuild
I had same problem, after read your answers , went to Task Manager and searched for app.exe because i believe maybe it doesn't close .
And found it , select it and do END TASK .my problem solved.
Before rebuild the solution, clear the project, stop the IIS and open the "bin" folder property. Uncheck the Read-only Attribute in general tab then rebuild.
I found that ending all msbuild.exe tasks (in Task Manager) fixed the issue with VS2012.
I struggeled with this since years.
I finally downloaded LockHunter to find out who locked the file.
In my case it was MBAM.
Once I added my project's directory to MBAMs exclusion list, I didn't have this problem anymore.
I too had the same issue. I resolved it
Closed my VS, then in Task Manager, End tasks like Microsoft VisualStudio WCF Tools, MSBuild.exe
Then open VS and clean and rebuild.
No matter what the cause of this problem is, the only working solution for me is the following:
Go to Your-Project-Properties -> Application tab(first tab) -> Change the Assembly name.
This way your app creates a new assembly file each time you change the assembly name.
Finally, after you finish to develop, you can delete all those extra assembly files and just keep the last one (main one). Non of the other solutions worked for me, except this one.
Run Visual Studio as Administrator
We recently experienced this on a WinPhone 8 project, in VS 2012 Update 2.
Inexplicably, the cause was using the Tuple type. Removing the code that used a Tuple the problem went away. Add the code back the problem returned.
This will Sound crazy, when ever i build the project the error will be displayed and the avast antivirus will show it as malicious attempt and the project does not run.i just simply disable my antivirus and build my solution again the missing .EXE file has been Created and the project has been successfully executed.
Or you can try this
Visual Studio build fails: unable to copy exe-file from obj\debug to bin\debug
I solved this by killing XDesProc which had a handle on the DLL it couldn't delete.
Well i have the same problem, my way to fix it was to stop and disable the "application experience" service in Windows.
Not a direct answer to your question..
One scenario when this can come is listed below -
If your application is under Debugging process - say by "Attach to Process" debugging, this error may come
If this error was encountered, you can proceed as the following
End the msbuild.exe task
End the explorer.exe task
Run the explorer.exe task again
for me it was the antivirus. Just add visual studio project or entire parent folder to Antivirus exclusion list or you can also add file extension as exclusion and this method worked for me in visual studio 2010/2012
Solution1:
Close the project.
Delete the bin folder.
Open the project.
Build the project.
Solution2:
Add the following code in pre-build event:
attrib -r $(OutDir)*..\* /s
This command line code will remove the ready-only attribute of "bin" folder. Now visual studio can easily delete and copy new dlls.
A very simple solution is to open the Task Manager (CTRL + ALT + DELETE), go to Processes tab and search by name the processes with your project name that are still running. Kill all the processes and go on ! :)
after day with search and build and rebuild i found that you just need to turn off turn on the visual studio its look like it catch the service in different thread
My Visual studio 2019 suddenly stops and restarts and then when i run project this error comes.
I resolve this issue by going into my project folder and delete bin and obj folder
Then clean and rebuild my project. This resolve my issue.