Develop Reference

How do you copy folders from dotnet core project to publish folder. Specifically .cshtml files

When using examples such as
<!--Include in publish-->
<ItemGroup>
<None Include="exampleDirectory\**\*.*" CopyToOutputDirectory="Always" CopyToPublishDirectory="Always" />
</ItemGroup>
This folder has .cshtml and .cshtml.cs files but only the .cshtml.cs files are copied. Is there a specific reason these files do not copy over?
Copy and paste of the required folder into the publish output directory works. Meaning if this copy mechanism just worked and copied all the files this wouldn't be an issue.
I have it setup as <None because I need to have two directories and using <Content gives an error of having two contents being used.
C:\Program Files\dotnet\sdk\3.1.404\Sdks\Microsoft.NET.Sdk\targets\Microsoft.NET.Sdk.DefaultItems.targets(318,5): error NETSDK1022: Duplicate 'Content' items were included. The .NET SDK includes 'Content' i
tems from your project directory by default. You can either remove these items from your project file, or set the 'EnableDefaultContentItems' property to 'false' if you want to explicitly include them in yo
ur project file. For more information, see https://aka.ms/sdkimplicititems. The duplicate items were: 'dirName\fileName.cshtml'; 'dirName\fileName.cshtml' [C:\path\to\projectName.csproj]
Which when set to false for EnableDefaultContentItems it still does not copy the .cshtml files, just the .cshtml.cs files.

why do you have 'None'?
Example:
<ItemGroup> <Content Include="AppData\**" CopyToPublishDirectory="PreserveNewest"/> </ItemGroup>

How to publish additional files into bin folder

My .net web app project also includes some unmanaged dlls as additional files.
These are a couple of levels deep in subfolders.
When I publish this project I need these files to be copied to the bin folder alongside all the other binaries.
No matter what settings I try, the best I can get is for them to be published into their existing folder structure which is not where I need them to be.
I've created a PostBuild event to copy the files and this works when building locally but not when publishing to a server. I've not been able to get PostPublish events to work in the same way.
Is there another way to achieve this?
Note this is similar but not the same as a previous question:
Publish unmanaged DLL from referenced project

I have a similar setup. 2 projects in my solution, one .NET Core and the other C++. When I am going to publish the dotnetcoreapp2.2 I want to include the precompiled C++ DLL from the other project.
#JuanR's answer is not working for me, though it is already pretty close to my version. It looks like the <ItemGroup> needs to be in the <Target> tag.
<Target Name="PrepublishScript" BeforeTargets="PrepareForPublish">
<ItemGroup>
<DataModelFiles Include="$(ProjectDir)..\MyCppProject\bin\Release\MyCppProject.dll" />
</ItemGroup>
<Copy SourceFiles="#(DataModelFiles)" DestinationFolder="$(PublishDir)" SkipUnchangedFiles="false" />
</Target>

Try using an after-publish task.
You can create an item group for copy:
<ItemGroup>
<binFilesToCopy Include="$(OutDir)\somepath\to\yourexternalDLLFolder\*" />
<!-- Add more folders/files you want to copy here -->
</ItemGroup>
Then add a target for after publishing:
<Target Name="AfterPublish">
<Copy SourceFiles ="#(binFilesToCopy)" DestinationFolder ="$(OutDir)\bin" />
</Target>
I did this mostly from memory so double-check for syntax, but get you the idea.

In the properties of the file you can set Copy to output directoryto Copy always or you can edit the solution file, expand the xml tag of the file needed and add <CopyToOutputDirectory>Always</CopyToOutputDirectory> as sub-tag.

Build configuration for dynamically referenced projects

I have an ASP.NET project that is included in multiple solutions. In each solution I'd like a different unreferenced project to be included in the ASP.NET project's build output. The solutions look like this:
Foo.sln
WebApp.csproj
Foo.csproj
Bar.sln
WebApp.csproj
Bar.csproj
Ideally, this would work even when debugging with F5. I tried doing this with build configurations, but deviating from the typical 'Debug' and 'Release' seems brittle when working within Visual Studio. Is there a typical way of doing this?

Disclaimer: I don't think this is a very good idea to do but it seems like it can be done.
To test this solution I created two projects. ConsoleApplication1 and ClassLibrary1. ConsoleApplication1 does not have a reference (that is visible in Visual Studio) to ClassLibary1 but when building ConsoleApplication1 from Visual Studio it will build then copy the ClassLibary1.dll to the bin folder of ConsoleApplication1.
To import the target file you will go ahead and add this line to the project that you want to build the unreferenced project. This path will be relative to the current project so in my case the target file was at the root of my solution. Make sure you add this after the line <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> because unreferenced.target relies on targets that are setup in Microsoft.CSharp.targets.
<Import Project="..\unreferenced.target" />
Then you will go ahead and create a file name unreferenced.target and add the contents below to the file.
<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<!-- Start another msbuild task to build your unreferenced project -->
<Target Name="BuildBeforeResolveReferences" BeforeTargets="BeforeResolveReferences">
<MSBuild
BuildInParallel="False"
Projects="$(SolutionDir)ClassLibrary1\ClassLibrary1.csproj"
RunEachTargetSeparately="True"
StopOnFirstFailure="False"
UnloadProjectsOnCompletion="False">
</MSBuild>
</Target>
<Target Name="CopyUnreferencedProjectOutput" AfterTargets="Build">
<!-- This item group is here because we do not want it evaluated by msbuild until the ClassLibrary1.csproj has been compiled and its output is in its output directory -->
<ItemGroup>
<!-- Gets a list of all files at the OutputPath that end in .dll if you need the pdbs remove the .dll -->
<!-- To maintain folder structure in the bin folder use <SourceFiles Include="..\ClassLibary1\#(OutputPath)**\*.dll" /> the double ** is a recursive wild card and will look through all directorys -->
<SourceFiles Include="$(MSBuildProjectDirectory)\..\ClassLibrary1\$(OutputPath)*.dll" />
</ItemGroup>
<!-- To make sure the copy maintains folder structure switch it to this copy -->
<!-- <Copy SourceFiles="#(SourceFiles)" DestinationFiles="#(SourceFiles -> '$(MSBuildProjectDirectory)$(OutputPath)%(RecursiveDir)%(Filename)%(Extension)')" /> -->
<Copy SourceFiles="#(SourceFiles)" DestinationFolder="$(MSBuildProjectDirectory)\$(OutputPath)" />
</Target>
<!-- Cleans up all the files when clean is called -->
<Target Name="CleanUnreferenceProjectOutput" BeforeTargets="Clean">
<ItemGroup>
<!-- Removed the .dll from the end of this to clean up the pdbs as well -->
<SourceFiles Include="$(SolutionDir)\ClassLibrary1\$(OutputPath)*" />
<SourceFiles Include="$(SolutionDir)\ConsoleApplication1\$(OutputPath)*.dll" />
</ItemGroup>
<Delete Files="#(SourceFiles)" />
</Target>
</Project>
I think this is the best that can be done. You could extend this to have a list of projects that are not referenced but you want to build but for this example I just left it at one.
EDIT 2: Before getting to the current solution I did extensive research into injecting the reference into the ProjectReference itemgroup before assemblies were resolved. It can be done but you have to set the property BuildInVisualStudio to false because otherwise when the msbuild conditions are evaluted in the ResolveProjectReferences target in Microsoft.Common.Current.targets you will select a MSBuild task that only runs the GetManifest target. I was able to get the solution to build but given my lack of knowledge on what setting BuildInVisualStudio to false entails I opted for the solution above. Also I added a task for cleaning up the files that were moved to the bin folders because clean will only cleanup what {ProjectName}{ProjectExtension}FileListAbsoluteText.txt in the obj folder of your project.
EDIT: After doing some more research into the solution below it will only work from the command line. I am currently looking into why this is occuring.

I don't know if there is a typical way of doing what you are asking for (from IDE), but you have an options to accomplish this manually by editing the *.*proj files.
Each project will emit output (*.dll, *.exe, app.config, etc), and it will be copied to the folder specified in the $(OutputPath) property (internally it will use OutDir property). If you will build a solution, you will have the $(SolutionDir) property, as well as $(SolutionName). So, you can define new msbuild project, which will be referenced by the other ones, and you can set the property $(OutputPath) so that every output will go into one folder (let call it Common.props):
<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<SolutionDir Condition=" '$(SolutionDir)' == '' ">$(MSBuildThisFileDirectory)<SolutionDir>
<SolutionName Condition=" '$(SolutionName)' == '' " >DefaultSlnName</SolutionName>
<Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
<OutputPath>$(SolutionDir)$(SolutionName)\bin\$(Configuration)</OutputPath>
</PropertyGroup>
</Project>
After that, you should import that project by your other projects - *.*proj (you should specify correct path to the project):
<Import Project="..\Common.props" Condition="Exists('..\Common.props')" />
Using common $(OutputPath) property will place all of your binaries to the one folder - this should help to resolve your task.

Add a directory to clickonce

I want to add a directory and its files to visual studio keeping the root dir. I did this with the below piece of XML on my .csproj file but this does add all its files to solution explorer but exclude the root. The file are variable and I don't want to hard code them add manually. That's why I'm looking for an automated solution.
How do I fix this?
<ItemGroup>
<Content Include="bin\x86\release\myFolder\**\*">
<Visible>true</Visible>
<Link>%(RecursiveDir)%(Filename)%(Extension)</Link>
</Content>
I would like to include this directory (and not only its files) in ClickOnce publishing.

I couldn't think of any automatic way to created the folder and make the solutin explorer aware of this files. So I created the folder on right click on project -> add folder. Unloaded the project and edited the piece of XML which add the directory I've created to solution explorer to this:
<ItemGroup>
<Content Include="foo\*.*">
<CopyToOutputDirectory>Always</CopyToOutputDirectory>
<Visible>True</Visible>
</Content>
</ItemGroup>
Now solution explorer is aware of that files and so does clickonce. The files get properly in the app.publish folder
NOTE: On this project, the foo files came from another folder (external C++'s binary output folder). They're copyed at post-build time. The folder name is sort of hard-coded (I need to chage them manually on the VS solution explorer, on the .csproj file and in the xcopy command-line on post-build) cause I didn't find any other way to do that.

<Target Name="AddGeneratedFiles" AfterTargets="SOMETASK">
<CreateItem Include="*.cpp">
<Output TaskParameter="Include" ItemName="ClCompile" />
</CreateItem>
</Target>

Exclude files from web site deployment with msbuild

I have a web site project that I deploy using msbuild. In the project there are some files and folders that are needed for the build (e.g. the web.config part replacement files) but that I don't want to deploy to the target site.
The best I could think of is a post-build target that removes these files, but I'd like to know if there is a way to have these files not copied to the output folder.

Hi Check this blog post out it saved my day,
I was trying to exclude the un-minified version of the javascripts, and use only the minified version when published (I'm removing large javascripts and chirp.config) its only needed for debug.
just put this on the Project file as stated on the link.
<ItemGroup>
<ExcludeFromPackageFolders Include="Scripts\large">
<FromTarget>Project</FromTarget>
</ExcludeFromPackageFolders>
<ExcludeFromPackageFiles Include="Scripts\mash.js.chirp.config" />
<ExcludeFromPackageFiles Include="Content\mash.js.chirp.config" />
</ItemGroup>
The published site will not include the following:
Scripts\large
mash.js.chirp.config

You can select the files and set their "Build Action" to "ExcludeFromPackageFiles". That way visual studio will edit the csproj xml and you don't have to.

in the properties explorer for the files change the option "copy to output directory to "do not copy"

You can use MSDeploy with Web Publishing Pipeline to exclude files to be included in the package creation.
You can use something like this if you want to exclude for example App_Data folder from the deployed package
<Target Name="ExcludeApp_Data" DependsOnTarget="$(ExcludeApp_DataDependsOn)" Condition="$(ExcludeApp_Data)" >
<ItemGroup>
<ExcludeFromPackageFolders Include="App_Data">
<FromTarget>ExcludeApp_Data</FromTarget>
</ExcludeFromPackageFolders>
</ItemGroup>
</Target>
Somehow editor doesn't display the code properly.
The above gets generated inside the proj file when you configure the Package/Publish web. You can add your own target to get it done.
For example, if you want to exclude Scripts\jquery files from your build, create seperate ExcludeScriptFiles.wpp.targets file as below
<ItemGroup>
<ExcludeFromPackageFolders Include="Internal">
<FromTarget>ExcludeScriptFiles.wpp.targets</FromTarget>
</ExcludeFromPackageFolders>
<ExcludeFromPackageFiles Include="Scripts\jquery.js;xyz.js">
<FromTarget>ExcludeScriptFiles.wpp.targets </FromTarget>
</ExcludeFromPackageFiles>
</ItemGroup>
This is just a simple example to write your own target.
Hope this helps

I'm using Visual Studio 2012 with Jenkins and the only thing that worked for me was changing "Build Action" to "None:"
Internally this sets the XML tag in the PROJECT.csproj file from "Content" to "None:"
<None Include="form.coffee" />
I closed the project then manually edited the file using another editor to exclude all my coffee files en mass.
(All my coffee files are still transcompiled to js files.)