Develop Reference

How do i include batch files inside of my .exe Instead of needing them in the folder the .exe is located in

So been searching or the web but can't seem to find an answer that has helped me. I have been looking for almost a week now.
I created a program in vs, alongside with some batch files. The Batch files run great by themselves and through the debug/release when including them in the folder with the .exe.
My problem is I want to be able to ONLY have the .exe file from my release and it still work.
Is there a way i can build these files inside the .exe? I have tried using c# to write my console commands instead of including seperate batch files. But im pretty new to c# and i get nothing but errors with the commands i want to run/if i run to many lines.
I would much rather have just c# instead of including the batch files but that I can't seem to figure out a solution to either.
Any help would be appreciated.
This is me currently calling batch files which works just fine. Again, if there is a way to just write this in c# instead of calling a batch file I would be happy to learn.
Process process = new Process();
ProcessStartInfo psi = new ProcessStartInfo();
psi.CreateNoWindow = false;
psi.Verb = "runas";
psi.FileName = Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location) + #"/" + "undo.bat";
psi.UseShellExecute = true;
process.StartInfo = psi;
_ = process.Start();
process.WaitForExit();
I'm starting CyberSecurity soon and am playing around with some Security stuff on my computer. Below is a sample code from my batch file to enable Security Protocols. If anything how would i write this in c#?
echo ...
echo Enabling Windows Firewall
netsh advfirewall set allprofiles state on
echo Enalbing HyperVisor
bcdedit /set hypervisorlaunchtype auto
echo Enabling UAC
%windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 1 /f
echo.
echo.
echo Your Computer will now be restarting for changes to take effect!
timeout 10
shutdown /r /t 001

What you can do is include the batchfiles as embedded resources in your project. Then read them and then execute them.
to include them as embedded resources example...
add them to your project.
right click and go to properties
select embedded resource
then to extract...
Write file from assembly resource stream to disk
you can then write the file to disk and create process on it. or there is a way to execute cmd.exe without writing the file to disk but this is a little complicated so the best way is to just write to disk.
Execute BATCH script in a programs memory

I followed the guide given above and a few others to get my solution to work. Embed the resource that's in your solution, then I used the following code to pretty much create the functions of being able to write it.
private static void Extract(string nameSpace, string outDirectory, string internalFilePath, string resourceName)
{
Assembly assembly = Assembly.GetCallingAssembly();
using (Stream s = assembly.GetManifestResourceStream(nameSpace + "." + (internalFilePath == "" ? "" : internalFilePath + ".") + resourceName))
using (BinaryReader r = new BinaryReader(s))
using (FileStream fs = new FileStream(outDirectory + "//" + resourceName, FileMode.OpenOrCreate))
using (BinaryWriter w = new BinaryWriter(fs))
w.Write(r.ReadBytes((int)s.Length));
}
Here is what I used to save, execute then delete the file.
Extract("nameSpace", "outDirectory", "internalFilePath", "resourceName");
Process process = new Process();
ProcessStartInfo psi = new ProcessStartInfo();
psi.CreateNoWindow = false;
psi.Verb = "runas";
psi.FileName = #"C:/" + "resourceName";
psi.UseShellExecute = true;
process.StartInfo = psi;
_ = process.Start();
process.WaitForExit();
System.Threading.Thread.Sleep(10);
if ((System.IO.File.Exists(psi.FileName)))
{
System.IO.File.Delete(psi.FileName);
}
Keep in mind im new when it comes to this so im sure there is a better way of writing it, but this worked for me!

Call to Process works fine with Debug, but it doesn't work in the installed application

I am developing a Windows Form program that has callings to ffmpeg library through the class Process.
It works fine when I run it with the Debug in Visual Studio 2013. But when I install the program and I invoke the operation that call to the ffmpeg Process, it doesn't work. The cmd screen appears an disappears and nothing happens.
I have tried to know what can be happening getting a log file with the output of ffmpeg, in case it was a problem in the ffmpeg libraries. However, after executing it the log is empty, what means that the ffmpeg command has not been executed.
Can someone help me, please?
The code is this:
ProcessStartInfo startInfo = new ProcessStartInfo();
startInfo.FileName = "cmd.exe";
startInfo.Arguments = "/c " + ffmpegPath + " " + commandArguments;
using (Process processTemp = new Process())
{
processTemp.StartInfo = startInfo;
processTemp.EnableRaisingEvents = true;
processTemp.Start();
processTemp.WaitForExit();
}
I am invoking to cmd.exe (not directly ffmpeg.exe) because in the arguments sometimes there can be a pipe (that is why the command starts with "/c").

Are you sure this isn't a privileges issue when trying to execute the cmd.exe (e.g you need administrator privileges)
try adding
startInfo.Verb = "runas";
Paul

Hmm its not a path issue with spaces in file/directory names is it? For ffmpegPath or one of your command parameters (if a file path). Surround all file paths with ' like below.
Try surrounding any file paths with '
startInfo.Arguments = "/c '" + ffmpegPath + "' " + commandArguments;
Also you could try adding /K to the cmd command call to stop if from closing the command prompt when it finishes. It might tell you the error before it closes the window but you wont see it if it closes so quickly
Good luck :)
Paul

Whitespaces at the Process Arguments

I am trying to create a Visual Studio Add-In by using Visual Studio 2015, VSIX project. The add-in should be able to run an .exe file along with current project path. Currently i can find the path of the project and give it as argument of the Process (the .exe file).
The .exe file is run by cmd as follows:
the.exe -d projectDirectoryPath
Detecting the project path is not my problem but, if the path contains Space Character , it is understood as a seperate argument.
Following code is what i've used for starting the process:
string myDir = activeProjectPath();
ProcessStartInfo startInfo = new ProcessStartInfo();
startInfo.CreateNoWindow = false;
startInfo.UseShellExecute = false;
startInfo.RedirectStandardOutput = true;
startInfo.FileName = pathOfExe + "\\the.exe";
startInfo.Arguments = "-d " + myDir;
The code works fine when the path of the current project does not contain Space Character, otherwise process can not started. The process gives following error:
Given args:-d C:\Users\theUser\Documents\Visual Studio 2015\Projects\testProject\testProject
Too many arguments specified in your command line! Skipping extra argument: Studio
Too many arguments specified in your command line! Skipping extra argument: 2015\Projects\testProject\testProject
Note: When i try to run the.exe from cmd, it accepts space characters in the path of the projects.
How can i solve this issue?
Thanks!

Try to use " character. You can specify the path in the following form:
"C:\Users\foo\My Documents\file name.sln", for example.
You can surround any path with " character, like in batch or Powershell script.
startInfo.Arguments = string.Concat("-d ", "\"", myDir, "\"");

how to give address of parts to copy command in c#

when i run copy command in my c# code it produce no error or exception because it is not finding the parts path i do not know how to give full directory path or path of every part which i am joining.actually i am merging file parts to a single file using coy/b by using this code...
string strCmdText;
strCmdText = "/C copy/b test.txt.10485760.0000.part" +
"test.txt.10485760.0001.part" +
"test.txt.10485760.0002.part" +
"test.txt.10485760.0003.part" +
"test.txt.10485760.0004.part" +
"test.txt.10485760.0005.part test.txt";
System.Diagnostics.Process.Start("CMD.exe", strCmdText);

You can specify the path of your files as the working path of the process. For example:
var startInfo = new System.Diagnostics.ProcessStartInfo
{
WorkingDirectory = #"THE\PATH\OF\FILES",
WindowStyle = System.Diagnostics.ProcessWindowStyle.Normal,
FileName = "cmd.exe",
Arguments = "YOUR COMAND HERE";
};
Process process = Process.Start(startInfo);
For your command, note that you can copy all files into one using a wildcard for the parts:
copy *.part test.txt
/b is for binary data, so i think is not needed in your case.
You can also set other properties for a process, for more info check the doc: ProcessStartInfo.

For such a complex task, I would use the process as a bash rather then just an execution tool.
Create a Process
Redirect it's streams (Input, Output)
With a StreamReader and StreamWriter u can now access the cmd
Now just control it the way u need it, like setting the working directory to the path and do ur command.
If this is not what u want, u can allways set the working directory on the ProcessStartInfor -> Link

C# archiving using 7zip, keeps hanging on wildcard call

Hey all quick question for you. I am trying to archive a directory of files into a zip folder using 7zip as a system process but I am running into an odd error. Whenever I do a wildcard specification in my source file name such as "*.txt" it works fine. However, once I use the wildcard * around the actual file name (Which I need to and can't work around that), 7zip just seems to hang. I can see the archive directory get created in the folder but I can't open it and I have to close 7zip down via task manager.
Any advice?
Code is below:
public static void archiveFiles(string executionDirectory,string workDirectory,
string[] files)
{
string sourceName = #"C:\mypath\*testfile*"; <----// This seems to be my issue
string targetName = #"C:\\testcompress\archive.zip";
ProcessStartInfo p = new ProcessStartInfo();
p.FileName = #"C:\program files\7-zip\7z.exe";
p.Arguments = "a -t7z \"" + targetName + "\" \"" + sourceName + "\" -mx=9";
p.WindowStyle = ProcessWindowStyle.Hidden;
Process x = Process.Start(p);
x.WaitForExit();
}

You're most likely getting this issue because your path #"C:\mypath*testfile*" is a verbatim string, thus using the "*" character, or other such wildcards, are being taken as literal in the path instead of wildcards. Trying taking the # off the beginning of strings containing wildcards and that should fix your problem. You can find a more thorough explanation of what the "#" character, used in context of a prefix to strings, does here:
Verbatim Strings

I think you are having issues with your \'s as well as the fact that you should be using 7za.exe and not 7z.exe. Make sure your application has access to write to the directory in question.
string sourceName = #"C:\mypath\*testfile*";
string targetName = #"C:\testcompress\archive.zip";
ProcessStartInfo p = new ProcessStartInfo();
p.FileName = #"C:\program files\7-zip\7za.exe";
p.Arguments = string.Format ( "a -t7z {0} {1} -mx=9",targetName,sourceName);
p.WindowStyle = ProcessWindowStyle.Hidden;
Process x = Process.Start(p);
x.WaitForExit();
console.writeline(string.format("7zip returned with exit code {0}",x.ExitCode));
7zip exit codes can be found here
Remember you can test it in a command prompt window to be sure that it works.
C:\program files\7-zip\7za.exe a -t7z C:\program files\7-zip\7za.exe C:\mypath*testfile* -mx=9