When I set the value of IsClosed during runtime, OnIsClosedChanged() is called fine.
However, the Designer sets the value of the property but does not call the OnIsClosedChanged().
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
if ((bool)this.GetValue(IsClosedProperty) == value)
return;
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Obviously IsClosed is not modified by the Designer and only IsClosedProperty receives the xaml change.
My question is: How can I run IsClosed after the value has been modified in the Designer. Or at least add some logic to the non-runtime changes.
You would have to register a PropertyChangedCallback with property metadata.
The reason is that dependency properties set in XAML or by bindings or some other source do not invoke the CLR wrapper (the setter method). The reason is explained in the XAML Loading and Dependency Properties article on MSDN:
For implementation reasons, it is computationally less expensive to
identify a property as a dependency property and access the property
system SetValue method to set it, rather than using the property
wrapper and its setter.
...
Because the current WPF implementation of the XAML processor behavior
for property setting bypasses the wrappers entirely, you should not
put any additional logic into the set definitions of the wrapper for
your custom dependency property. If you put such logic in the set
definition, then the logic will not be executed when the property is
set in XAML rather than in code.
Your code should look like this:
public static readonly DependencyProperty IsClosedProperty =
DependencyProperty.Register(
"IsClosed", typeof(bool), typeof(GroupBox),
new FrameworkPropertyMetadata(false,
FrameworkPropertyMetadataOptions.AffectsRender,
(o, e) => ((GroupBox)o).OnIsClosedChanged()));
public bool IsClosed
{
get { return (bool)GetValue(IsClosedProperty); }
set { SetValue(IsClosedProperty, value); }
}
private void OnIsClosedChanged()
{
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Found the answer myself now. ValidateValueCallback comes really close! (as Alex K has pointed out) But it is a static method and I don't get any reference to the instance which has been changed. The key is to use a PropertyChangedCallback in FrameworkPropertyMetadata which is also an argument passed to the Property.Register method.
See:
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender, new PropertyChangedCallback(OnIsClosedChangedPCC)));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private static void OnIsClosedChangedPCC(DependencyObject d, DependencyPropertyChangedEventArgs e) {
GroupBox current = (GroupBox)d;
current.IsClosed = current.IsClosed;
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
That does now re-set the IsClosedValue which triggers the OnIsClosedChanged to run.
Thank's for your help guys!
Related
When I set the value of IsClosed during runtime, OnIsClosedChanged() is called fine.
However, the Designer sets the value of the property but does not call the OnIsClosedChanged().
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
if ((bool)this.GetValue(IsClosedProperty) == value)
return;
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Obviously IsClosed is not modified by the Designer and only IsClosedProperty receives the xaml change.
My question is: How can I run IsClosed after the value has been modified in the Designer. Or at least add some logic to the non-runtime changes.
You would have to register a PropertyChangedCallback with property metadata.
The reason is that dependency properties set in XAML or by bindings or some other source do not invoke the CLR wrapper (the setter method). The reason is explained in the XAML Loading and Dependency Properties article on MSDN:
For implementation reasons, it is computationally less expensive to
identify a property as a dependency property and access the property
system SetValue method to set it, rather than using the property
wrapper and its setter.
...
Because the current WPF implementation of the XAML processor behavior
for property setting bypasses the wrappers entirely, you should not
put any additional logic into the set definitions of the wrapper for
your custom dependency property. If you put such logic in the set
definition, then the logic will not be executed when the property is
set in XAML rather than in code.
Your code should look like this:
public static readonly DependencyProperty IsClosedProperty =
DependencyProperty.Register(
"IsClosed", typeof(bool), typeof(GroupBox),
new FrameworkPropertyMetadata(false,
FrameworkPropertyMetadataOptions.AffectsRender,
(o, e) => ((GroupBox)o).OnIsClosedChanged()));
public bool IsClosed
{
get { return (bool)GetValue(IsClosedProperty); }
set { SetValue(IsClosedProperty, value); }
}
private void OnIsClosedChanged()
{
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Found the answer myself now. ValidateValueCallback comes really close! (as Alex K has pointed out) But it is a static method and I don't get any reference to the instance which has been changed. The key is to use a PropertyChangedCallback in FrameworkPropertyMetadata which is also an argument passed to the Property.Register method.
See:
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender, new PropertyChangedCallback(OnIsClosedChangedPCC)));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private static void OnIsClosedChangedPCC(DependencyObject d, DependencyPropertyChangedEventArgs e) {
GroupBox current = (GroupBox)d;
current.IsClosed = current.IsClosed;
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
That does now re-set the IsClosedValue which triggers the OnIsClosedChanged to run.
Thank's for your help guys!
When I set the value of IsClosed during runtime, OnIsClosedChanged() is called fine.
However, the Designer sets the value of the property but does not call the OnIsClosedChanged().
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
if ((bool)this.GetValue(IsClosedProperty) == value)
return;
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Obviously IsClosed is not modified by the Designer and only IsClosedProperty receives the xaml change.
My question is: How can I run IsClosed after the value has been modified in the Designer. Or at least add some logic to the non-runtime changes.
You would have to register a PropertyChangedCallback with property metadata.
The reason is that dependency properties set in XAML or by bindings or some other source do not invoke the CLR wrapper (the setter method). The reason is explained in the XAML Loading and Dependency Properties article on MSDN:
For implementation reasons, it is computationally less expensive to
identify a property as a dependency property and access the property
system SetValue method to set it, rather than using the property
wrapper and its setter.
...
Because the current WPF implementation of the XAML processor behavior
for property setting bypasses the wrappers entirely, you should not
put any additional logic into the set definitions of the wrapper for
your custom dependency property. If you put such logic in the set
definition, then the logic will not be executed when the property is
set in XAML rather than in code.
Your code should look like this:
public static readonly DependencyProperty IsClosedProperty =
DependencyProperty.Register(
"IsClosed", typeof(bool), typeof(GroupBox),
new FrameworkPropertyMetadata(false,
FrameworkPropertyMetadataOptions.AffectsRender,
(o, e) => ((GroupBox)o).OnIsClosedChanged()));
public bool IsClosed
{
get { return (bool)GetValue(IsClosedProperty); }
set { SetValue(IsClosedProperty, value); }
}
private void OnIsClosedChanged()
{
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Found the answer myself now. ValidateValueCallback comes really close! (as Alex K has pointed out) But it is a static method and I don't get any reference to the instance which has been changed. The key is to use a PropertyChangedCallback in FrameworkPropertyMetadata which is also an argument passed to the Property.Register method.
See:
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender, new PropertyChangedCallback(OnIsClosedChangedPCC)));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private static void OnIsClosedChangedPCC(DependencyObject d, DependencyPropertyChangedEventArgs e) {
GroupBox current = (GroupBox)d;
current.IsClosed = current.IsClosed;
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
That does now re-set the IsClosedValue which triggers the OnIsClosedChanged to run.
Thank's for your help guys!
When I set the value of IsClosed during runtime, OnIsClosedChanged() is called fine.
However, the Designer sets the value of the property but does not call the OnIsClosedChanged().
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
if ((bool)this.GetValue(IsClosedProperty) == value)
return;
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Obviously IsClosed is not modified by the Designer and only IsClosedProperty receives the xaml change.
My question is: How can I run IsClosed after the value has been modified in the Designer. Or at least add some logic to the non-runtime changes.
You would have to register a PropertyChangedCallback with property metadata.
The reason is that dependency properties set in XAML or by bindings or some other source do not invoke the CLR wrapper (the setter method). The reason is explained in the XAML Loading and Dependency Properties article on MSDN:
For implementation reasons, it is computationally less expensive to
identify a property as a dependency property and access the property
system SetValue method to set it, rather than using the property
wrapper and its setter.
...
Because the current WPF implementation of the XAML processor behavior
for property setting bypasses the wrappers entirely, you should not
put any additional logic into the set definitions of the wrapper for
your custom dependency property. If you put such logic in the set
definition, then the logic will not be executed when the property is
set in XAML rather than in code.
Your code should look like this:
public static readonly DependencyProperty IsClosedProperty =
DependencyProperty.Register(
"IsClosed", typeof(bool), typeof(GroupBox),
new FrameworkPropertyMetadata(false,
FrameworkPropertyMetadataOptions.AffectsRender,
(o, e) => ((GroupBox)o).OnIsClosedChanged()));
public bool IsClosed
{
get { return (bool)GetValue(IsClosedProperty); }
set { SetValue(IsClosedProperty, value); }
}
private void OnIsClosedChanged()
{
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Found the answer myself now. ValidateValueCallback comes really close! (as Alex K has pointed out) But it is a static method and I don't get any reference to the instance which has been changed. The key is to use a PropertyChangedCallback in FrameworkPropertyMetadata which is also an argument passed to the Property.Register method.
See:
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender, new PropertyChangedCallback(OnIsClosedChangedPCC)));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private static void OnIsClosedChangedPCC(DependencyObject d, DependencyPropertyChangedEventArgs e) {
GroupBox current = (GroupBox)d;
current.IsClosed = current.IsClosed;
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
That does now re-set the IsClosedValue which triggers the OnIsClosedChanged to run.
Thank's for your help guys!
When I set the value of IsClosed during runtime, OnIsClosedChanged() is called fine.
However, the Designer sets the value of the property but does not call the OnIsClosedChanged().
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
if ((bool)this.GetValue(IsClosedProperty) == value)
return;
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Obviously IsClosed is not modified by the Designer and only IsClosedProperty receives the xaml change.
My question is: How can I run IsClosed after the value has been modified in the Designer. Or at least add some logic to the non-runtime changes.
You would have to register a PropertyChangedCallback with property metadata.
The reason is that dependency properties set in XAML or by bindings or some other source do not invoke the CLR wrapper (the setter method). The reason is explained in the XAML Loading and Dependency Properties article on MSDN:
For implementation reasons, it is computationally less expensive to
identify a property as a dependency property and access the property
system SetValue method to set it, rather than using the property
wrapper and its setter.
...
Because the current WPF implementation of the XAML processor behavior
for property setting bypasses the wrappers entirely, you should not
put any additional logic into the set definitions of the wrapper for
your custom dependency property. If you put such logic in the set
definition, then the logic will not be executed when the property is
set in XAML rather than in code.
Your code should look like this:
public static readonly DependencyProperty IsClosedProperty =
DependencyProperty.Register(
"IsClosed", typeof(bool), typeof(GroupBox),
new FrameworkPropertyMetadata(false,
FrameworkPropertyMetadataOptions.AffectsRender,
(o, e) => ((GroupBox)o).OnIsClosedChanged()));
public bool IsClosed
{
get { return (bool)GetValue(IsClosedProperty); }
set { SetValue(IsClosedProperty, value); }
}
private void OnIsClosedChanged()
{
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
Found the answer myself now. ValidateValueCallback comes really close! (as Alex K has pointed out) But it is a static method and I don't get any reference to the instance which has been changed. The key is to use a PropertyChangedCallback in FrameworkPropertyMetadata which is also an argument passed to the Property.Register method.
See:
public static DependencyProperty IsClosedProperty = DependencyProperty.Register("IsClosed", typeof(bool), typeof(GroupBox), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.AffectsRender, new PropertyChangedCallback(OnIsClosedChangedPCC)));
public bool IsClosed {
get {
return (bool)this.GetValue(IsClosedProperty);
}
set {
this.SetValue(IsClosedProperty, value);
OnIsClosedChanged();
}
}
private static void OnIsClosedChangedPCC(DependencyObject d, DependencyPropertyChangedEventArgs e) {
GroupBox current = (GroupBox)d;
current.IsClosed = current.IsClosed;
}
private void OnIsClosedChanged() {
_rowDefContent.Height = new GridLength((IsClosed ? 0 : 1), GridUnitType.Star);
}
That does now re-set the IsClosedValue which triggers the OnIsClosedChanged to run.
Thank's for your help guys!
I made own dependency property like this
public bool Visible
{
get
{
return (bool)GetValue(VisibleProperty);
}
set
{
System.Windows.Visibility v = value == true ? System.Windows.Visibility.Visible : System.Windows.Visibility.Hidden;
SetValue(VisibleProperty, value);
border.Visibility = v;
}
}
public static readonly DependencyProperty VisibleProperty = DependencyProperty.Register("Visible", typeof(bool), typeof(SpecialMenuItem), new UIPropertyMetadata(false));
I'm binding my app property to it, but no luck.
App property(app.xaml.cs) and binding:
public bool IsGamePlaying
{
get
{
return isGamePlaying;
}
set
{
isGamePlaying = value;
}
}
private bool isGamePlaying;
<my:SpecialMenuItem ... Visible="{Binding Path=IsGamePlaying, Source={x:Static Application.Current}}" />
When I'm in debug, it reads the IsGamePlaying property, but doesn't make attempt to set the Visible property
How make it work?
You cannot include any logic in your dependency property wrapper. WPF will, where possible, directly call GetValue/SetValue rather than use your CLR property. You should include any extraneous logic by using metadata in your dependency property. For example:
public static readonly DependencyProperty VisibleProperty = DependencyProperty.Register("Visible", typeof(bool), typeof(SpecialMenuItem), new FrameworkPropertyMetadata(false, OnVisibleChanged));
private static void OnVisibleChanged(DependencyObject dependencyObject, DependencyPropertyChangedEventArgs e)
{
// logic here will be called whenever the Visible property changes
}
The CLR wrapper is merely a convenience for consumers of your class.