I know that ASP.net web service supports only HTTP protocol and with WCF you have more options like TCP and Named pipes etc. Can you think of any scenarios in which one might have to consume a WCF service through an ASP.net Web API?
Following would be one of them use case where you want to call wcf service from web API.
If you already have a wcf service running and available which is doing some complex operations and you do not want it to be available directly to your consumers, you can create a web API and call the wcf service to perform the complex tasks and let the consumers to use the web API. In web API you can put extra logic of validation and authorization of the incoming requests.
Wcf being an older technology it would be better to write something new and eventually replace wcf rather than maintaining it.
Also If the current wcf is setup is not available via http protocol then not all the clients can communicate with it. Web API has that edge over wcf service.
How web API would connect to wcf service?
This depends on lot of factors such as network, deployment strategy, security etc.
But following would be one of the examples.
If the wcf service is available on tcp and web API and wcf are running on the same network, then web API can call wcf.
There may be a different answer to this question based on what exact problem you are trying to solve.
My answer is based on what information you have provided and the experience I gained by solving similar issue in real life.
I have read many articles in the web so far, about the differences between WCF and ASP.Net web API. Unfortunately I could not come up to a clear idea about what will serve my purpose. Most of the Articles I have read highlighted on the design point of view of the two web services. But I am confused what will work best for my project and why? Here is my brief description of the project.
I need to create a communication channel between two servers (both are written in C#). The servers will communicate using messages (certain type of commands). The messages sometimes can be only acknowledgements, and sometimes the messages may contain instructions to do some computation. For example, one message can be draw something, or send an SMS etc. And not necessarily the messages will involve any database transactions. But the messages can sometimes send large text files as payload (around 1-5 MB maxm). What I believe WCF is very will surely do this, but can I do the same with ASP.net web API. Because so far all the example I have seen for ASP.Net web api: they are good for RESTful services that manipulate some kind of DB store (GET, PUT, DELETE). But in my case I will need to expose service points that will
do some kind of processing such as return the value of a computation, sending and acknowledging messages, etc.
Not just manipulating a DB-store.
So, what should be the best and simplest way to do so? It is needed to be mentioned that I did not find any straight forward example of achieving this using ASP.Net web API.
The Question you have asked is an overly-broad or primarily opinion-based, and its hard to give an example for what you have asked.
Important Points:
Firstly, if you are going to create a service which would be used on different platforms, then go with WCF.
Secondly, if you are creating internet service which is going to use external resource, then go with Web API.
Web API is the best choice if you are going to create a service for low bandwidth devices or mobile devices to access client.HTTP
request/response is also more readable as compared to SOAP because it
contains header, body, etc. which makes it complex.
Just take few minutes and read the below article, until you get complete understanding of few principles.
Original Source Can be found Here, Here and Here.
To whom choose between WCF or WEB API :
Choose WCF when you want to create a service that should support special scenarios such as one way messaging, message queues, duplex communication etc.
Choose WCF when you want to create a service that can use fast transport channels when available, such as TCP, Named Pipes, or maybe even UDP (in WCF 4.5), and you also want to support HTTP when all other transport channels are unavailable.
Choose Web API when you want to create a resource-oriented services over HTTP that can use the full features of HTTP (like URIs, request/response headers, caching, versioning, various content formats).
Choose Web API when you want to expose your service to a broad range of clients including browsers, mobiles, iphone and tablets.
Why to choose Web API
Web API doesn't have tedious and extensive configuration like WCF REST service.
It is very simple, creating service with Web API. Where as With WCF REST, service creation is bit difficult (requires clear understanding of configurations).
Web API is only based on HTTP and HTTPS and easy to define, expose and consume in a REST-full way.
Web API is light weight architecture and good for devices which have limited bandwidth like smart phones.
My Opinion:
Simplest way to do so - Web API (Since you dont have any examples for this)
Hardest Way is (Configurations) - WCF (Better go with WCF, since you have examples)
I hope this gives you a clear idea about what to choose...
First things first, RESTful is a stateless and uniform interface norm that can be applied to web services. It doesn't have to be automatically and only plain old CRUD service backed by a DB.
In the real world, we can hardly say that all web REST API respect fully the norm, in fact they don't most of the time, especially the stateless part.
For your message based API, especially if it's bidirectional and event based, you can use websockets and consider the REST API a way to expose an uniform, stateless web interface to create those. And yes you can use websockets with ASP.NET WebApi there's plenty of tutorial out there, even for the newer ASP.NET Core.
The "between services" interactions part is no different than the usual Web browser <=> Web service, you're just using C# code instead of JS for the client.
I can hardly recommend WCF that uses SOAP since it's hardly portable considering the web standards nowadays. For instance if want to use a browser client instead of another ASP.NET service, well you'll have to do additional code client side to handle supports.
You can use WCF websockets, providing the almost all the advantages of WCF SOAP.
tl;dr :
You can mix RESTful and Websockets, it can actually be better than going full REST or full Websockets
It's personal preference to use SOAP over websockets but do comes with a potential technical debt considering what you want to do afterwards
Message API between services is no different than a message API between a service and a browser
WebAPI is not just good for RESTful webservices. You can easily send requests to a WebAPI controller and handle it the way you want : calculations, sending messages, interact with a CRM, interact with DB or anything else.
WCF was created to manage SOAP based webservices and brings extra complexity. It handles TCP, Mime...
If you just need to handle HTTP requests, the simplest way is to go with WebAPI.
I would suggest Web API if it is for RESTful services as WCF was never made to serve as Restful services although you can serve as one where as Web API was made particularly for this.
does listing application program interface means listing all the properties in the project ??
Web Service endpoint and API endpoint are more or less the same?
does listing application program interface means listing all the
properties in the project ??
API is a list of software components and their definitions that are shared/opened for any other consumers (other software components, web clients etc.) So for C# API is list of members (classes, methods and their signatures, properties etc) that can be used to cooperate with the system.
Web Service endpoint and API endpoint are more or less the same?
It is not always the same. API is a general term. It is something that allows someone to work with the system. But in context of web services and REST - it is the same.
Generally speaking that service technology has been emerging and the current trend has been Web Services and now REST.
Why you use it ? It is because Let say you have a function can PrintFile() and you want me to use it from my machine, you need a way to tell me how to connect with it. so that means, the function code is with your machine, and my machine can call with some parameters. That is why we need these technologies.
There has been many technologies like DCOM, ASMX , SVC, REST. I have given a comparison below.
COM Limitation: COM should be packaged along with the program. COM is accessible for only specific programming langugage, which means C++ dll is not directly accessible to Java.
DCOM Limitation: A proxy needs to be installed on local machine. Again a compatiblity issue, permission headache.
ASMX Web service that is accessible through HTTP protocal and the client only needs to know how to call through a proxy that uses SOAP as a message protocol.
SVC Client still needs to have a knowledge to interpret SOAP.
Why Web service era is drying… Web service calls require a standard to be followed such as SOAP. Not all devices knows about these standards. This adds a complexity to provide a library at client level that can communicate in SOAP message format and web service can be connected. In case of REST WebApi it uses http. Thus, it has less overhead as compare to previous technology. Now what it means to your coding that your functions are available as is from Mobile to a Desktop. All you need is HTTP to call, which is available even in 20 $ mobile phones.
Thus, you should use WEBAPI technology to provide your function so that I can call your method from my machine.
Hope it helps you.
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 5 years ago.
Improve this question
I've spent a few months trying to grasp the concepts behind WCF and recently I've developed my first WCF service application.
I've struggled quite a bit to understand all the settings in the config file.
I am not convinced about the environment but it seems that you can do amazing stuff with it.
The other day I've found out that Microsoft has come out with a new thing called ASP.NET Web API.
For what I can read it's a RESTful framework, very easy to use and implement.
Now, I am trying to figure out what are the main differences between the 2 frameworks and if I should try and convert my old WCF service application with the new API.
Could someone, please, help me to understand the differences and usage of each?
For us, WCF is used for SOAP and Web API for REST. I wish Web API supported SOAP too. We are not using advanced features of WCF. Here is comparison from MSDN:
The new ASP.NET Web API is a continuation of the previous WCF Web API project (although some of the concepts have changed).
WCF was originally created to enable SOAP-based services. For simpler RESTful or RPCish services (think clients like jQuery) ASP.NET Web API should be good choice.
ASP.net Web API is all about HTTP and REST based GET,POST,PUT,DELETE with well know ASP.net MVC style of programming and JSON returnable; web API is for all the light weight process and pure HTTP based components. For one to go ahead with WCF even for simple or simplest single web service it will bring all the extra baggage. For light weight simple service for ajax or dynamic calls always WebApi just solves the need. This neatly complements or helps in parallel to the ASP.net MVC.
Check out the podcast : Hanselminutes Podcast 264 - This is not your father's WCF - All about the WebAPI with Glenn Block by Scott Hanselman for more information.
In the scenarios listed below you should go for WCF:
If you need to send data on protocols like TCP, MSMQ or MIME
If the consuming client just knows how to consume SOAP messages
WEB API is a framework for developing RESTful/HTTP services.
There are so many clients that do not understand SOAP like Browsers, HTML5, in those cases WEB APIs are a good choice.
HTTP services header specifies how to secure service, how to cache the information, type of the message body and HTTP body can specify any type of content like HTML not just XML as SOAP services.
Since using both till now, I have found many differences between WCF and Web API. Both technology stacks are suited well to different scenarios, so it is not possible to say which is better, this depends on configuration and scenario.
Properties ASP.Net Web API WCF
--------------------------------------------------------------------------------------------------
End point (mainly) Http based SOAP based
Service Type Front End Back-end
Support caching, compression, versioning No
Framework ASP.net WCF
Orientation Resource Oriented Service Oriented
Transports http http, tcp, MSMQ, Named pipe
Message pattern Request reply request Reply, one way, duplex
Configuration overhead Less Much
Security lesser than WCF (web standard security) Very high (WS-I standard)
Hosting IIS IIS, Windows Service, Self hosting
Performance Fast A bit slower than Web API
In use from .NET 4.0 .NET 3.5
Note: The data is not only my view, it is also collected from other official websites.
WCF will give you so much of out the box, it's not even comparable to anything. Unless you want to do on your own implementation of (to name a few) authentication, authorization, encryption, queuing, throttling, reliable messaging, logging, sessions and so on. WCF is not [only] web services; WCF is a development platform for SOA.
Why I'm answering:
I took huge amount of time to understand the difference between these two technologies. I'll put all those points here that I think "If I had these points at the time when I was wondering around in search of this answer, then I have decided very earlier in selecting my required technology."
Source of Information:
Microsoft® Visual Studio® 2015 Unleashed
ISBN-13: 978-0-672-33736-9 ISBN-10: 0-672-33736-3
Why ASP.NET Web API and WCF:
Before comparing the technologies of ASP.NET Web API and WCF, it is important to understand there are actually two styles/standards for creating web services: REST (Representational State Transfer) and SOAP/WSDL. The SOAP/WSDL was the original standard on which web services were built. However, it was difficult to use and had bulky message formats (like XML) that degraded performance. REST-based services quickly became the alternative. They are easier to write because they leverage the basic constructs of HTTP (GET, POST, PUT, DELETE) and typically use smaller message formats (like JSON). As a result, REST-based HTTP services are now the standard for writing services that strictly target the Web.
Let's define purpose of ASP.NET Web API
ASP.NET Web API is Microsoft’s technology for developing REST-based HTTP web services. (It long ago replaced Microsoft’s ASMX, which was based on SOAP/WSDL.) The Web API makes it easy to write robust services based on HTTP protocols that all browsers and native devices understand. This enables you to create services to support your application and call them from other web applications, tablets, mobile phones, PCs, and gaming consoles. The majority of applications written today to leverage the ever present Web connection use HTTP services in some way.
Let's now define purpose of WCF:
Communicating across the Internet is not always the most efficient means. For example, if both the client and the service exist on the same technology (or even the same machine), they can often negotiate a more efficient means to communicate (such as TCP/IP). Service developers found themselves making the same choices they were trying to avoid. They now would have to choose between creating efficient internal services and being able to have the broad access found over the Internet. And, if they had to support both, they might have to create multiple versions of their service or at least separate proxies for accessing their service. This is the problem Microsoft solved with WCF.
With WCF, you can create your service without concern for boundaries. You can then let WCF worry about running your service in the most efficient way, depending on the calling client. To manage this task, WCF uses the concept of endpoints. Your service might have multiple endpoints (configured at design time or after deployment). Each endpoint indicates how the service might support a calling client: over the Web, via remoting, through Microsoft Message Queuing (MSMQ), and more. WCF enables you to focus on creating your service functionality. It worries about how to most efficiently speak with calling clients. In this way, a single WCF service can efficiently support many different client types.
Example of WCF:
Consider the example:
The customer data is shared among the applications. Each application might be written on a different platform, and it might exist in a different location. You can extract the customer interface into a WCF service that provides common access to shared customer data. This centralizes the data, reduces duplication, eliminates synchronization, and simplifies management. In addition, by using WCF, you can configure the service endpoints to work in the way that makes sense to the calling client. Figure shows the example from before with centralized access of customer data in a WCF service.
Conclusion:
i) When to choose Web API:
There is no denying that REST-based HTTP services like those created using ASP.NET Web API have become the standard for building web services. These services offer an easy, straightforward approach for web developers building services. Web developers understand HTTP GET and POST and thus adapt well to these types of services. Therefore, if you are writing services strictly targeted to HTTP, ASP.NET Web API is the logical choice.
ii) When to choose WCF:
The WCF technology is useful when you need to support multiple service endpoints based on different protocols and message formats. Products like Microsoft BizTalk leverage WCF for creating robust services that can be used over the Web as well via different machine-to-machine configurations.If, however, you do need to write an application that communicates over TCP/IP when connected to the local network and works over HTTP when outside the network, WCF is your answer.
Be Warned:
Web developers often view WCF as more difficult and complex to develop against. Therefore, if you do not foresee the need for multiprotocol services, you would likely stick with ASP.NET Web API.
There is a comparison on MSDN about this
WCF and ASP.NET Web API
For me, the choice was about Who the clients are, and where are they located?
Within the company Network and .NET based clients : Use WCF with TCP binding (Fast communication than HTTP)
Outside the company Network, and use diverse technologies like PHP, Python etc: Use Web API with REST
Business speaking, WebApi lacks of a WSDL, so the developers should document all manually. And if, for example, the WebApi operation returns a list of objects then, the client should creates the objects manually, i.e. WebAPI is really prone to errors of definitions.
The pro of Webapi is its more lightweight than WCF.
Regarding the statement "WebApi lacks of WSDL" there are several ways to generate Rest client. One popular approach is Swagger UI / (Swashbukkle Nuget). This gives a rich interface to understand the REST end point's input and output schema and online tool to test the end points.
JSON LD (Json Linked Documents) is another emerging standard which will further improve the JSON based REST developer experience by exposing the JSON schema with better semantics.
With wcf we can configure and expose the same service support for multiple endpoints like tcp, http.if you want your service to be only http based then it will be better to go with web API. Web API has very less configuration when compared to wcf and is bit faster than wcf. Wcf also supports restful services. If you have limitation of .Net framework 3.5 then your option is wcf.
We have an application in which we have created a service layer with most of the business logic and utility services (logging, exceptions, caching etc). We have to come with a way to expose this service as an API to the UI components. Here are some of our requirements:
We would like to create multiple
components based on the service.
We would like third party developers
to use our service to create their
own components or utilize our data.
For scalability we would like to have
a multiple instances installed on
different boxes. Similarly there
could be more than an instance of the
same UI component.
One way to expose the service layer is to host it under a REST based WCF layer.
The other way is to host the service in model layer of an ASP.Net MVC project. The UI components will be hosted in MVC projects of their own. The Javascript in the views of UI components will directly call the controllers of service project.
WCF is supposed to be very heavyweight option. On the other hand I am not too convinced with the MVC approach as I feel that this is not purpose it is meant for.
Could you please recommend me a way in Microsoft world to expose our service layer.
WCF seems to be the way to go here. Although WCF started out (in my oppinion) as a beast, it got tamed over the years with better HTTP and JSON support and less custom configuration (although still allowing you to modefy basicly every little aspect of your service).
Exposing your current service layer as a REST Service is a breeze and allows your customers/yourself to easily consume it on any device that supports HTTP.
See: http://codebetter.com/glennblock/2010/11/01/wcf-web-apis-http-your-way/
Models are not services. Models are POCOs that hold data.
You can expose your service through a WCF Service, and let your ASP.NET MVC app consume it. If you're always sure that the service will run on the same box as the client app, you can use named pipes for transport -- then the overhead of WCF is minimal, compared to the advantages.
WCF seems to be the direction that Microsoft is headed for this and for good reason. WCF services are the best option here because you mentioned third-party development support. Because these web services are defined by a WSDL, they are cross platform and can be consumed by non .NET applications.
It perfectly seperates your service layer to be consumed by ANY components.