My visual studio 2012 had stopped showing debugger exceptions. I mean this dialog that shows me exact exception and line: http://i.msdn.microsoft.com/dynimg/IC286574.jpg.
In example if I run following code in visual studio:
using System;
using System.Windows.Forms;
namespace debugger_test
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
public void Form1_Load(object sender, EventArgs e)
{
int zero = 0;
int a = 1/zero; // it hangs on this line
MessageBox.Show("this messagebox is never shown");
}
}
}
then it doesn't return any exception. It just starts and no code after int a = 1/zero; is executed.
But when I run the same program alone as a compiled .exe then it returns this kind of exception: http://i.msdn.microsoft.com/dynimg/IC8596.gif in this case about DivideByZeroException.
It happens to any project.
Repairing and reinstalling visual studio didn't resolve it. Although some VS settings were kept after reinstallation.
I am not aware of any changes that could cause it and I am not sure when it started happening.
How may I get debugger from the first picture working in visual studio again? Thanks.
EDIT: Sascha's advise didn't completely resolve my problem.
I can't figure out how to not throw an exception that is inside try{} code but throw an exception that is not inside try{}.
Following codes either only throw an exception or only hangs on int gg = 1/a; line no matter wherher I use try/catch or not.
public void Form1_Load(object sender, EventArgs e)
{
int zero = 0;
int a = 1/zero; // this line should throw an exception
MessageBox.Show("to be never shown");
}
__
public void Form1_Load(object sender, EventArgs e)
{
try
{
int zero = 0;
int a = 1/zero;
MessageBox.Show("to be never shown");
}
catch
{
MessageBox.Show("catched"); // it should show this messagebox
}
}
Any ideas how to set it up correctly? Thanks.
Have a look at this question about a known problem on x64 systems:
This is a known issue on 64-bit OS platform. The reason is that the
64bit OS core does not allow user mode exception through kernal mode
stacks. The exception is swallowed by OS sliently. That happens in
FormLoad handler, because it is called in an OS callback. 32bits OS
doesn't do this, so it doesn't repro there.
The OS team is investigating related issues. In the mean time, you do
have to work around this issue. Turning on "Stop on first chance
exception" will make the debugger to stop in this scenario. But it
does make the debugger to stop very often, so you might want to do
this only when you find a problem
It's a bug / limitation of Visual Studio that happens when your PC is 64 bit and the exception happens in form load.
This seems to have fixed it for me so far.
In Registry Editor, locate the following registry subkey: HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options
Create a registry entry of the DWORD value.
Name the new registry entry DisableUserModeCallbackFilter.
Set the value of the DisableUserModeCallbackFilter registry entry to 1.
found there http://support.microsoft.com/kb/976038/en-us
And it has to be compiled as release. Ridiculous.
Related
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}
This is getting extremely irritating. Right now I have a winforms application, and things were not working right, but no exceptions were being thrown as far as I could tell. After stepping through almost all pieces of relevant code, it turns out that an exception was being thrown at the start of my application.
Long story short, in WinForms, being as awesome as it is, if an exception occurs the WinForms library ignores it. No "an unhandled exception has occurred" JIT message is thrown, it just stops processing the current event and goes back to the GUI.
This is causing random bugs, because code to load data isn't being called due to the exception occurring prior to this data being loaded.
To see this in action I created a brand new WinForms application, and entered the following code:
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void Form1_Load(object sender, EventArgs e)
{
string blah = null;
blah.Trim();
}
}
Press F5 and the form loads without any errors showing, even though a null reference is being thrown.
I then tried to go to my Program.cs main method and add Application.SetUnhandledExceptionMode(UnhandledExceptionMode.ThrowException); to it. Still my form loads without causing any errors to be thrown.
Even though I know that I can tell VS to break on all exceptions, I find this situation really bad. It causes really wierd issues that are hard to debug in production, and as this is an internal tool I really want to have it so it actually errors out when an exception occurs, and not silently disregards it.
Does anyone know how to do this?
Update: Just to update on things I have learned from the comments.
This does appear to be a 64-bit issue with windows, as I learned from this question which I did not see before posting. In that question it pointed to a Microsoft bug report about this, which had this to say:
Hello,
This bug was closed as "External" because this behavior results from how x64 version of Windows handle exceptions. When a user mode exception crosses a kernel transition, x64 versions of Windows do not allow the exception to propagate. Therefore attached debuggers are unaware of the fact that an exception occured resulting in the debugger failing to break on the unhandled exception.
Unfortunately where is nothing that the Visual Studo team can do to address this, it is the result of operating system design. All feedback regarding this issue should be addressed to the Windows team; however the Windows team considers this to be the "correct" operating system design, and considers the x86 behavior to be "incorrect".
Best Regards,
Visual Studio Debugger
That being said, builds not run through visual studio (or using Ctrl+F5 to run) does seem to show the JIT exception message box EXCEPT if you have the following code in your Program.cs:
Application.SetUnhandledExceptionMode(UnhandledExceptionMode.ThrowException);
That code will cause windows to ignore the exception.
However, if you (instead) subscribe to the Application.ThreadException event, not only will your exceptions be caught, visual studio's debugger will break on unhandled exceptions!
In your Program.cs' Main function you should also ensure that you've wrapped your call to open the form in a try/catch. Additionally use the AppDomain.UnhandledException to catch exceptions. We also add Application.ThreadException too.
I believe the following will give you hooks into all the exceptions that can be thrown...
static void Main()
{
try
{
System.Windows.Forms.Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException);
System.Windows.Forms.Application.ThreadException += new System.Threading.ThreadExceptionEventHandler(OnGuiUnhandedException);
AppDomain.CurrentDomain.UnhandledException += OnUnhandledException;
var form = new MainForm();
form.ShowDialog();
}
catch (Exception e)
{
HandleUnhandledException(e);
}
finally
{
// Do stuff
}
}
private static void HandleUnhandledException(Object o)
{
// TODO: Log it!
Exception e = o as Exception;
if (e != null)
{
}
}
private static void OnUnhandledException(Object sender, UnhandledExceptionEventArgs e)
{
HandleUnhandledException(e.ExceptionObject);
}
private static void OnGuiUnhandedException(object sender, System.Threading.ThreadExceptionEventArgs e)
{
HandleUnhandledException(e.Exception);
}
Try the following.
Handle exceptions in your main application entry point.
Also, manage unhandled thread exceptions using a ThreadExceptionEventHandler
This is the code snippet:
[STAThread]
public static void Main(string[] args)
{
try
{
Application.ThreadException += new ThreadExceptionEventHandler(Application_ThreadException);
//your program entry point
}
catch (Exception ex)
{
//manage also these exceptions
}
}
private void Application_ThreadException(object sender, ThreadExceptionEventArgs e)
{
ProcessException(e.Exception);
}
An easy fix is not to run under the debugger.
The debugger is masking the exception for some reason. If you run your app normally (Ctrl+F5), you'll get the usual "Unhandled exception has occurred in your application... Continue/Quit?" dialog.
Having experienced this often and identified the issue regarding 64 bit OS and the Form.Load event, I always just make a point of doing all my start up functions in the Form.Shown event. For all practical purposes this is the same thing (aside from a few rare, exceptional circumstances), and the JIT message is produced in the Shown event.
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}