Develop Reference

How to run code when hitting enter in a c# text box

I'm using web forms
Right now my code runs when I leave the text box and the text has changed. I am running into issues. If I change the text but hit a button instead of enter, it resets via code. I need to be able to change the text and click a button which wont yet do anything, or change the text and hit enter which will trigger code.
thanks for the help
This is text changed event for the text box with notations of what im needing to do. really what I think I need is an event for clicking enter, not changing text
protected void txtboxPlate_TextChanged(object sender, EventArgs e)
{
if (txtboxPlate.Text == "plate number")
{
//will check database for "plate number" and do stuff on enter.
}
else
{
resetforms();// on enter
}
else
{
the text has changed by user, but has clicked a button and needs nothing to happen because of this text change
}
}

You need to implement a method for the KeyDown event of your textbox.
private void txtboxPlate_KeyDown(object sender, KeyEventArgs e)
{
if (e.KeyCode == Keys.Enter) {
//Code
}
}

Keydown is a client-side event, as far as I know you're more than likely going to have to use JavaScript/Jquery.
Refer to the following link:
Textbox Keydown Event
I would of used a comment but... rep issues :/
edit:
To anyone that hasn't realised yet, the question changed to webforms not winforms
Alternative:
Use a button.
You could place a button next to the textfield, it's simple and not a lot of work goes into it. You can set the TabIndex of the textbox to 1 and the TabIndex of the button to 2 so when you hit TAB it will focus the textbox and if pressed again it will focus the button. You could also look into adding the button to the textbox for design purposes.
edit: You also need to think about post back, when you hit a button the page get's post back meaning values are lost, to persist the data within the field you would have to use view state, session variables or a hidden field. For simplicity I'd set the value of the text box to a hidden field and then simply re-apply the value on page_load. If the value needs to persist across multiple postbacks/accessed from other pages use session variables.
So as a code example:
Remove the Text_changed event entirely.
protected void btnDoStuff(object sender, EventArgs e)
{
if(txtPlateNumber.Text == "Plate Number")
{
//Do stuff
}
else
{
//Do other stuff
}
}
-
If you notice the value disappearing after the post back do something like:
protected void btnDoStuff(object sender, EventArgs e)
{
if(txtPlateNumber.Text == "Plate Number")
{
//Do stuff
myHiddenField.Value == txtPlateNumber.Text;
}
else
{
//Do other stuff
}
}
then reset the value on page_load.

If this is winform and you still want to use textchanged you can try catching your code first for example:
protected void txtboxPlate_TextChanged(object sender, EventArgs e)
{
//Catching code
if (txtboxPlate.Text != "")
{
if (txtboxPlate.Text == "plate number")
{
//will check database for "plate number" and do stuff on enter.
}
else
{
resetforms();// on enter
}
}
else
{
the text has changed by user, but has clicked a button and needs nothing to happen because of this text change
}
cause what textchanged is doing is unless txtboxPlate.Text equels "plate number" it will always do the else statement. Correct me if i'm wrong though but i had the same problem before which almost made me go insane.
Or try above 1 upvote code:
protected void txtboxPlate_TextChanged(object sender, EventArgs e)
{
//Event only happens if you press enter
if (e.KeyCode == Keys.Enter)
{
if (txtboxPlate.Text == "plate number")
{
//will check database for "plate number" and do stuff on enter.
}
else
{
resetforms();// on enter
}
}
else
{
the text has changed by user, but has clicked a button and needs nothing to happen because of this text change
}
}

Using sender to determine what button is pressed in ListView

I have a ListView that has Update and Cancel buttons. Both of these buttons have a CommandName of Cancel, so they fire the same ListView event handler (ListView_ItemCanceling).
Inside this event handle I execute my stored procedures. The issue I am having is since both buttons fire the same event handler they both update. Even if there are no changes being made.
I would like to try to determine the button that has fired the event at the start of the event handler (possibly using sender?), but I cannot figure out how to do this.
This is what I was currently trying to do in the ListView_ItemCancelling event handler:
Button newButton = (Button)sender;
if(newButton.Text == "Cancel")
{
Console.Write("this worked");
}
When I execute this code I get an error message telling me that I cannot convert the sender object from ListView object to a Button object.
Any help will be greatly appreciated!

You can define to command names for each button to detect the which one is click for example:
define the first as "Cancel1" and the other "Cancel2"
and in the code you can check like that:
if(CommandName == "Cancel1")
{
// do some thing
}
else if(CommandName == "Cancel2")
{
// do other staff
}
or if both at doing the same job but you need to determine the sender
if(CommandName == "Cancel1" || CommandName == "Cancel2")
{
// do some thing common
}
if(CommandName == "Cancel1")
{
// do some thing if button 1 clicked
}
if(CommandName == "Cancel2")
{
// do some thing if button 2 clicked
}

I came to the answer with help from #paqogomez. He suggested I use the ItemCommand event handler for the ListView to get the button that is being clicked for the listview.
Inside the ItemCommand event handler I checked them command argument and used the appropriate code thereafter.
protected void LV_Tickets_ItemCommand(object sender, ListViewCommandEventArgs e)
{
if(e.CommandName == "Update")
{
//code here
}
}

The sender seems to be your ListView, not Button. Try using Button_OnClick event instead of ListView_ItemCancelling.
Or try doing some reseach on ListView_ItemCancelling, such as using ListViewCancelEventArgs e parameter, maybe it can help you in this situation. You can read more about it on MSDN.

Radio button checked changed event fires twice

Please read my question its not a duplicate one.
I've three radio buttons on windows form and all these buttons have common 'CheckedChanged' event associated. When I click any of these radio buttons, it triggers the 'CheckedChanged' event twice.
Here is my code:
private void radioButtons_CheckedChanged(object sender, EventArgs e)
{
//My Code
}
I inserted the breakpoint and the whole code within this event iterates twice.
Please tell me why it is behaving like this?

As the other answerers rightly say, the event is fired twice because whenever one RadioButton within a group is checked another will be unchecked - therefore the checked changed event will fire twice.
To only do any work within this event for the RadioButton which has just been selected you can look at the sender object, doing something like this:
void radioButtons_CheckedChanged(object sender, EventArgs e)
{
RadioButton rb = sender as RadioButton;
if (rb != null)
{
if (rb.Checked)
{
// Only one radio button will be checked
Console.WriteLine("Changed: " + rb.Name);
}
}
}

To avoid it, just check if radioButton is checked
for example:
private void radioButton1_CheckedChanged(object sender, EventArgs e)
{
if (radioButton1.Checked)
//your code
}

CheckedChanged is raised whenever the Checked property changes. If you select a RadioButton then the previously selected RadioButton is unchecked (fired CheckedChanged), and then the new RadioButton is checked (fired CheckedChanged).

It's triggering once for the radio button transition from checked to unchecked, and again for the radio button transitioning from unchecked to checked (i.e. any change in checked state triggers the event)

You could set the AutoCheck property true for each RadioButton then catch the Click event instead of the CheckChanged event. This would ensure that only one event is fired, and the logic in the handler can cast the sender to type RadioButton if needed to process the click. Often the cast can be avoided if the handler logic is simple. Here is an example which handles three controls, rbTextNumeric, rbTextFixed and rbTextFromFile:
private void rbText_Click(object sender, EventArgs e)
{
flowLayoutPanelTextNumeric.Enabled = rbTextNumeric.Checked;
txtBoxTextFixed.Enabled = rbTextFixed.Checked;
flowLayoutPanelTextFromFile.Enabled = rbTextFromFile.Checked;
}

{
public partial class Form3 : Form
{
public Form3()
{
InitializeComponent();
}
int click = 0;
private void radioButton1_Click(object sender, EventArgs e)
{
click++;
if (click %2==1)
{
radioButton1.Checked = true;
}
if (click %2==0)
{
radioButton1.Checked = false;
}
if (radioButton1.Checked==true)
{
label1.Text = "Cheked";
}
if (radioButton1.Checked==false)
{
label1.Text = "Uncheked";
}
}
}
}

The other answers are correct but miss the reason for the underlying problem.
When a radio button is checked the first event sent is the change from the unchecked item
however if you check its state by its control name you will still see its old checked status because the form has not been updated yet. To see its true status you need to cast the sender object.
This allows you to perform any actions relating to the condition which is being deselected should you need to do so.
In the not uncommon scenario below multiple radio buttons are sent to the same handler event.
Simply checking the state of the sender for checked will not work here as we need to perform different actions depending on which radio button has been pressed.
So first we ignore any sender that has just been unchecked.
then we identify the checked sender by control name to process the correct action.
private void ModeChangedExample(object sender, EventArgs e)
{
// multiple radio buttons come here
// We only want to process the checked item.
// if you need to something based on the item which was just unchecked don't use this technique.
// The state of the sender has not been updated yet in the form.
// so checking against rdo_A check state will still show it as checked even if it has just been unchecked
// only the sender variable is up to date at this point.
// To prevent processing the item which has just been uncheked
RadioButton RD = sender as RadioButton;
if (RD.Checked == false) return;
if (rdo_A.Name == RD.Name)
{
//Do stuff
}
if (rdo_B..Name == RD.Name)
{
// Do other stuff
}
if (rdo_C.Name == RD.Name)
{
// Do something else
}
}

This problem of double checking happens when there is a series of RadioButton Clicks in succession.I had this same problem.The last click will give two results.To overcome this i made a dummy click in the end.The double click stopped.Try this method.
Venkatraman

Set focus to element

There are a button and a textbox. I added a "KeyDown" event to textbox so that when "enter" is pressed button gets clicked. Good, then I tried to give focus to textbox again but failed. In the code below I tried three ways but neither is working.
private void txt_addRemove_KeyDown(object sender, KeyEventArgs e)
{
if (e.Key == Key.Return)
{
btn_BC_add.RaiseEvent(new RoutedEventArgs(Button.ClickEvent));
// 1.way
// IInputElement focusedElement = FocusManager.GetFocusedElement(txt_addRemove);
// 2.way
// Keyboard.Focus(txt_addRemove);
// 3.way
// txt_addRemove.Focus();
}
}

Add this
if (!textBox1.Focus())
{
textBox1.Focus();
}
What this does:
1. We check if the textbox is NOT focused.
2. If it is not focused, focus the control.
EDIT: How about this:
btn_BC_add.PerformClick()

Try focusing the textbox after the event handler is finished using:
Dispatcher.Invoke(() => { txt_addRemove.Focus(); })

couldnt you also try changing the focus from the button event handler? this might not be desirable if you dont want the focus to be on your textbox after a normal click of the button, but it should work.
Im guessing that your button click is generating a post back before the focus can be changed

Problem with button when text entered into the textbox

I am trying to make the save button visible when text is entered into the text box by using the following code:
if (tbName.TextModified == true)
{
btnCTimetablesOk.Visible = true;
}
else
{
btnCTimetablesOk.Visible = false;
}
but it gives error at tbname.textmodified
is there any other way to visible the button when we enter the text in text box
this is error i am getting "the event textbox.textmodified can only appear on the left hand side of += or -="

Try using the textbox's Enter and Leave events to show/hide your button:
private void textBox1_Enter(object sender, System.EventArgs e)
{
btnCTimetablesOk.Visible = true;
}
private void textBox1_Leave(object sender, System.EventArgs e)
{
btnCTimetablesOk.Visible = false;
}
Then modify your textbox to use these new methods.

If I'm reading your text correctly, you want the save button to be visible when the textbox has text in it and invisible when the text box is blank. If that's the case, you can use the Leave event (which occurs when the textbox loses focus) and a simple if statement:
private void textBox1_Leave(object sender, System.EventArgs e)
{
if(textBox1.Text != "")
btnCTimetablesOk.Visible = true;
else
btnCTimetablesOk.Visible = false;
}
You can also put this conditional block in any other methods kicked off by events that change the text of the box.
Also, you might want to consider using Enabled instead of Visible, it'll leave the button on the form but will gray out the text and clicking will do nothing.

I'm going to take a stab in the dark here and assume that the button is related to the textbox and you probably want someone to be able to type something in the textbox then click the button. You probably don't want the user to have to type something, then tab out or click somewhere else to make the button visible then click the button.
tbName_TextChanged(object sender, EventArgs e)
{
btnCTimetablesOk.Visible = !String.IsNullOrEmpty(tbName.Text)
}
Btw you're getting that error because TextModified isn't a boolean property, it's an event, like TextChanged or Leave or Enter. You can assign an event handler to it but you can't just check it like that.
As an aside I personally hate systems hungarian for winforms controls. I'd much rather have a timetablesOkButton than a btnCTimeablesOK button. That way if you also have a timetablesNameTextBox you can see at a glance that the button and the textbox match. Of course it may not be up to you.