I'm trying out MSMQ with c#... I started by writing 2 simple console applications: one is the sender of a message (a class in a shared class library project) and one listener. worked great.
Next, what I wanted to learn is what happens in case of a failure on the receiving side (listener). So it got me started with transitional messaging. On a failure I see that the message stays in queue, but the server keeps asking for it. What I actually want to achieve is that the message is marked for X times retries at interval of times and then throw it to an error queue.
Now for my code...
Sender
Console.WriteLine("I am the sender");
Message newMessage;
MessageQueue queue = null;
string queueName = #".\Private$\MyQueue";
using (MessageQueueTransaction msgTx = new MessageQueueTransaction())
{
queue = new MessageQueue(queueName);
queue.DefaultPropertiesToSend.Recoverable = true;
while (Console.ReadLine() != null)
{
msgTx.Begin();
Person person = new Person
{
FirstName = "Shlomi",
LastName = "Or",
Birthday = new DateTime(1982, 5, 6)
};
queue.Send(person, "person_label", msgTx);
msgTx.Commit();
}
queue.Close();
}
Listener
Console.WriteLine("I am the reciever");
int counter = 0;
while (!Console.KeyAvailable)
{
Message newMessage;
MessageQueue queue = null;
string queueName = #".\Private$\MyQueue";
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required))
{
try
{
if (!MessageQueue.Exists(queueName))
queue = MessageQueue.Create(queueName, true);
else
queue = new MessageQueue(queueName);
if (queue.CanRead)
{
try
{
newMessage = queue.Receive(MessageQueueTransactionType.Automatic);
//newMessage.Formatter = new XmlMessageFormatter(new String[] { "System.String,mscorlib" });
//Console.WriteLine(newMessage.Body.ToString());
newMessage.Formatter = new XmlMessageFormatter(new Type[] { typeof(Person), typeof(Object) });
Person person = (Person)newMessage.Body;
Console.WriteLine(person.FirstName);
throw new Exception("Some error");
scope.Complete();
}
catch(Exception ex)
{
Console.WriteLine("exception occured " + (++counter));
}
}
}
finally
{
queue.Dispose();
}
}
}
when I run this code, what I see happening when I send only one message is that the error is thrown and it keeps trying to get the same message over and over. What I want is as explained above - some kind of retry and then move to error queue. how can I do that?
Related
Following this example I have now therefore been required to update the MQTT.NET from version 3 (that works thanks the provided help) to version 4.
A very basic set of capabilities would be enough:
Connect to an adress with a timeout
Check if the connection has gone well
Receive messages
check disconnection
that was extremely easy in version 3
MqttClientOptionsBuilder builder = new MqttClientOptionsBuilder()
.WithClientId("IoApp" + HelperN.MQTT.GetClientID(true))
.WithTcpServer("localhost", 1883);
ManagedMqttClientOptions options = new ManagedMqttClientOptionsBuilder()
.WithAutoReconnectDelay(TimeSpan.FromSeconds(60))
.WithClientOptions(builder.Build())
.Build();
mqttClient = new MqttFactory().CreateManagedMqttClient();
mqttClient.ConnectedHandler = new MqttClientConnectedHandlerDelegate(OnConnected);
mqttClient.DisconnectedHandler = new MqttClientDisconnectedHandlerDelegate(OnDisconnected);
mqttClient.ConnectingFailedHandler = new ConnectingFailedHandlerDelegate(OnConnectingFailed);
mqttClient.SubscribeAsync(...);
mqttClient.SubscribeAsync(...);
mqttClient.StartAsync(options).GetAwaiter().GetResult();
mqttClient.UseApplicationMessageReceivedHandler(args => { OnMessageReceived(args); });
but when it comes to version 4 if I have to relay on those examples I have problems.
Let's start from the connection
public static async Task Connect_Client_Timeout()
{
/*
* This sample creates a simple MQTT client and connects to an invalid broker using a timeout.
*
* This is a modified version of the sample _Connect_Client_! See other sample for more details.
*/
var mqttFactory = new MqttFactory();
strError = String.Empty;
using (var mqttClient = mqttFactory.CreateMqttClient())
{
var mqttClientOptions = new MqttClientOptionsBuilder().WithTcpServer("aaaa127.0.0.1",1883).Build();
try
{
using (var timeoutToken = new CancellationTokenSource(TimeSpan.FromSeconds(5)))
{
await mqttClient.ConnectAsync(mqttClientOptions, timeoutToken.Token);
}
}
catch (OperationCanceledException exc)
{
strError = "Connect_Client_Timeout exc:" + exc.Message;
}
}
}
And I call this task from the main awaiting the result.
var connectTask = Connect_Client_Timeout();
connectTask.Wait();<-----never ends
Since I put a wrong address "aaaa127.0.0.1" I expect a failure after 5 seconds. But the connectTask.Wait never end. But even if I put the right address "127.0.0.1" it never exits.
So perhaps the error stands in the connectTask.Wait();.
Thanks
The solution is here
In short you have to do this:
static async Task Connect()
{
IManagedMqttClient _mqttClient = new MqttFactory().CreateManagedMqttClient();
// Create client options object
MqttClientOptionsBuilder builder = new MqttClientOptionsBuilder()
.WithClientId("behroozbc")
.WithTcpServer("localhost");
ManagedMqttClientOptions options = new ManagedMqttClientOptionsBuilder()
.WithAutoReconnectDelay(TimeSpan.FromSeconds(60))
.WithClientOptions(builder.Build())
.Build();
// Set up handlers
_mqttClient.ConnectedAsync += _mqttClient_ConnectedAsync;
_mqttClient.DisconnectedAsync += _mqttClient_DisconnectedAsync;
_mqttClient.ConnectingFailedAsync += _mqttClient_ConnectingFailedAsync;
// Connect to the broker
await _mqttClient.StartAsync(options);
// Send a new message to the broker every second
while (true)
{
string json = JsonSerializer.Serialize(new { message = "Hi Mqtt", sent = DateTime.UtcNow });
await _mqttClient.EnqueueAsync("behroozbc.ir/topic/json", json);
await Task.Delay(TimeSpan.FromSeconds(1));
}
Task _mqttClient_ConnectedAsync(MqttClientConnectedEventArgs arg)
{
Console.WriteLine("Connected");
return Task.CompletedTask;
};
Task _mqttClient_DisconnectedAsync(MqttClientDisconnectedEventArgs arg)
{
Console.WriteLine("Disconnected");
return Task.CompletedTask;
};
Task _mqttClient_ConnectingFailedAsync(ConnectingFailedEventArgs arg)
{
Console.WriteLine("Connection failed check network or broker!");
return Task.CompletedTask;
}
}
and then just call Connect() and rely on the subscribed examples
Good evening everyone, I've got a web app written using .NET and a mobile app.
I'm sending some values to rabbitMQ server through my web app and this is working fine, i put it in a queue but when the mobile app accepts the request, i don't get the returned value.
Here is my controller
public async Task<ActionResult> GetCollect(int id)
{
int PartnerId = 0;
bool SentRequest = false;
try
{
SentRequest = await RuleRabbitMQ.SentRequestRule(id);
if(SentRequest )
{
PartnerId = await RuleRabbitMQ.RequestAccepted();
}
}
catch (Exception Ex)
{
}
}
This is my RabbitMQ class
public class InteractionRabbitMQ
{
public async Task<bool> SentRequestRule(int id)
{
bool ConnectionRabbitMQ = false;
await Task.Run(() =>
{
try
{
ConnectionFactory connectionFactory = new ConnectionFactory()
{
//credentials go here
};
IConnection connection = connectionFactory.CreateConnection();
IModel channel = connection.CreateModel();
channel.QueueDeclare("SolicitacaoSameDay", true, false, false, null);
string rpcResponseQueue = channel.QueueDeclare().QueueName;
string correlationId = Guid.NewGuid().ToString();
IBasicProperties basicProperties = channel.CreateBasicProperties();
basicProperties.ReplyTo = rpcResponseQueue;
basicProperties.CorrelationId = correlationId;
byte[] messageBytes = Encoding.UTF8.GetBytes(string.Concat(" ", id.ToString()));
channel.BasicPublish("", "SolicitacaoSameDay", basicProperties, messageBytes);
channel.Close();
connection.Close();
if (connection != null)
{
ConnectionRabbitMQ = true;
}
else
{
ConnectionRabbitMQ = false;
}
}
catch (Exception Ex)
{
throw new ArgumentException($"Thre was a problem with RabbitMQ server. " +
$"Pleaser, contact the support with Error: {Ex.ToString()}");
}
});
return ConnectionRabbitMQ;
}
public async Task<int> RequestAccepted()
{
bool SearchingPartner= true;
int PartnerId = 0;
await Task.Run(() =>
{
try
{
var connectionFactory = new ConnectionFactory()
{
// credentials
};
IConnection connection = connectionFactory.CreateConnection();
IModel channel = connection.CreateModel();
channel.BasicQos(0, 1, false);
var eventingBasicConsumer = new EventingBasicConsumer(channel);
eventingBasicConsumer.Received += (sender, basicDeliveryEventArgs) =>
{
string Response = Encoding.UTF8.GetString(basicDeliveryEventArgs.Body, 0, basicDeliveryEventArgs.Body.Length);
channel.BasicAck(basicDeliveryEventArgs.DeliveryTag, false);
if(!string.IsNullOrWhiteSpace(Response))
{
int Id = Convert.ToInt32(Response);
PartnerId = Id > 0 ? Id : 0;
SearchingPartner = false;
}
};
channel.BasicConsume("SolicitacaoAceitaSameDay", false, eventingBasicConsumer);
}
catch (Exception Ex)
{
// error message
}
});
return PartnerId ;
}
I am not sure this works, can't build an infrastructure to test this quickly, but - your issue is that the RequestAccepted returns a Task which completes before the Received event is caught by the Rabbit client library.
Syncing the two could possibly resolve the issue, note however that this could potentially make your code waiting very long for (or even - never get) the response.
public Task<int> RequestAccepted()
{
bool SearchingPartner= true;
int PartnerId = 0;
var connectionFactory = new ConnectionFactory()
{
// credentials
};
IConnection connection = connectionFactory.CreateConnection();
IModel channel = connection.CreateModel();
channel.BasicQos(0, 1, false);
TaskCompletionSource<int> tcs = new TaskCompletionSource<int>();
var eventingBasicConsumer = new EventingBasicConsumer(channel);
eventingBasicConsumer.Received += (sender, basicDeliveryEventArgs) =>
{
string Response = Encoding.UTF8.GetString(basicDeliveryEventArgs.Body, 0, basicDeliveryEventArgs.Body.Length);
channel.BasicAck(basicDeliveryEventArgs.DeliveryTag, false);
if(!string.IsNullOrWhiteSpace(Response))
{
int Id = Convert.ToInt32(Response);
PartnerId = Id > 0 ? Id : 0;
SearchingPartner = false;
tcs.SetResult( PartnerId );
}
};
channel.BasicConsume("SolicitacaoAceitaSameDay", false, eventingBasicConsumer);
return tcs.Task;
}
There are couple of issues with this approach.
First, no error handling.
Then, what if the event is sent by the RMQ before the consumer subscribes to it? The consumer will block as it will never receive anything back.
And last, I don't think RMQ consumers are ever intended to be created in every request to your controller and then never disposed. While this could work on your dev box where you create a couple of requests manually, it won't probably ever scale to fix a scenario where dozens/hundreds of concurrent users hit your website and multiple RMQ consumers compete one against the other.
I don't think there is an easy way around it other than completely separate the consumer out of your web app, put it in a System Service or a Hangfire job and let it get responses to all possible requests and from the cache - serve responses to web requests.
This is a pure speculation, though, based on my understanding of what you try to do. I could be wrong here, of course.
byte[] messageBytes = Encoding.UTF8.GetBytes(string.Concat(" ", idColeta.ToString()));
I reckon 'idColeta' is blank.
I have the following Function App
[FunctionName("SendEmail")]
public static async Task Run([ServiceBusTrigger("%EmailSendMessageQueueName%", AccessRights.Listen, Connection = AzureFunctions.Connection)] EmailMessageDetails messageToSend,
[ServiceBus("%EmailUpdateQueueName%", AccessRights.Send, Connection = AzureFunctions.Connection)]IAsyncCollector<EmailMessageUpdate> messageResponse,
//TraceWriter log,
ILogger log,
CancellationToken token)
{
log.LogInformation($"C# ServiceBus queue trigger function processed message: {messageToSend}");
/* Validate input and initialise Mandrill */
try
{
if (!ValidateMessage(messageToSend, log)) // TODO: finish validation
{
log.LogError("Invalid or Unknown Message Content");
throw new Exception("Invalid message content.");
}
}
catch (Exception ex)
{
log.LogError($"Failed to Validate Message data: {ex.Message} => {ex.ReportAllProperties()}");
throw;
}
DateTime utcTimeToSend;
try
{
var envTag = GetEnvVariable("Environment");
messageToSend.Tags.Add(envTag);
utcTimeToSend = messageToSend.UtcTimeToSend.GetNextUtcSendDateTime();
DateTime utcExpiryDate = messageToSend.UtcTimeToSend.GetUtcExpiryDate();
DateTime now = DateTime.UtcNow;
if (now > utcExpiryDate)
{
log.LogError($"Stopping sending message because it is expired: {utcExpiryDate}");
throw new Exception($"Stopping sending message because it is expired: {utcExpiryDate}");
}
if (utcTimeToSend > now)
{
log.LogError($"Stopping sending message because it is not allowed to be send due to time constraints: next send time: {utcTimeToSend}");
throw new Exception($"Stopping sending message because it is not allowed to be send due to time constraints: next send time: {utcTimeToSend}");
}
}
catch (Exception ex)
{
log.LogError($"Failed to Parse and/or Validate Message Time To Send: {ex.Message} => {ex.ReportAllProperties()}");
throw;
}
/* Submit message to Mandrill */
string errorMessage = null;
IList<MandrillSendMessageResponse> mandrillResult = null;
DateTime timeSubmitted = default(DateTime);
DateTime timeUpdateRecieved = default(DateTime);
try
{
var mandrillApi = new MandrillApi(GetEnvVariable("Mandrill:APIKey"));
var mandrillMessage = new MandrillMessage
{
FromEmail = messageToSend.From,
FromName = messageToSend.FromName,
Subject = messageToSend.Subject,
TrackClicks = messageToSend.Track,
Tags = messageToSend.Tags,
TrackOpens = messageToSend.Track,
};
mandrillMessage.AddTo(messageToSend.To, messageToSend.ToName);
foreach (var passthrough in messageToSend.PassThroughVariables)
{
mandrillMessage.AddGlobalMergeVars(passthrough.Key, passthrough.Value);
}
timeSubmitted = DateTime.UtcNow;
if (String.IsNullOrEmpty(messageToSend.TemplateId))
{
log.LogInformation($"No Message Template");
mandrillMessage.Text = messageToSend.MessageBody;
mandrillResult = await mandrillApi.Messages.SendAsync(mandrillMessage, async: true, sendAtUtc: utcTimeToSend);
}
else
{
log.LogInformation($"Using Message Template: {messageToSend.TemplateId}");
var clock = new Stopwatch();
clock.Start();
mandrillResult = await mandrillApi.Messages.SendTemplateAsync(
mandrillMessage,
messageToSend.TemplateId,
async: true,
sendAtUtc: utcTimeToSend
);
clock.Stop();
log.LogInformation($"Call to mandrill took {clock.Elapsed}");
}
timeUpdateRecieved = DateTime.UtcNow;
}
catch (Exception ex)
{
log.LogError($"Failed to call Mandrill: {ex.Message} => {ex.ReportAllProperties()}");
errorMessage = ex.Message;
}
try
{
MandrillSendMessageResponse theResult = null;
SendMessageStatus status = SendMessageStatus.FailedToSendToProvider;
if (mandrillResult == null || mandrillResult.Count < 1)
{
if (String.IsNullOrEmpty(errorMessage))
{
errorMessage = "Invalid Mandrill result.";
}
}
else
{
theResult = mandrillResult[0];
status = FacMandrillUtils.ConvertToSendMessageStatus(theResult.Status);
}
var response = new EmailMessageUpdate
{
SentEmailInfoId = messageToSend.SentEmailInfoId,
ExternalProviderId = theResult?.Id ?? String.Empty,
Track = messageToSend.Track,
FacDateSentToProvider = timeSubmitted,
FacDateUpdateRecieved = timeUpdateRecieved,
FacErrorMessage = errorMessage,
Status = status,
StatusDetail = theResult?.RejectReason ?? "Error"
};
await messageResponse.AddAsync(response, token).ConfigureAwait(false);
}
catch (Exception ex)
{
log.LogError($"Failed to push message to the update ({AzureFunctions.EmailUpdateQueueName}) queue: {ex.Message} => {ex.ReportAllProperties()}");
throw;
}
}
When I queue up 100 messages, everything runs fine. When I queue up 500+ messages, 499 of them are sent but the last none never is sent. I also start to get the following errors.
The operation was canceled.
I have Application Insights setup and configured and I have logging running. I am not able to reproduce locally and based on the following End-to-end transaction details from Application Insights, I believe the issue is happening at this point :
await messageResponse.AddAsync(response, token).ConfigureAwait(false);
Application Insights End-to-end transaction
host.json
{
"logger": {
"categoryFilter": {
"defaultLevel": "Information",
"categoryLevels": {
"Host": "Warning",
"Function": "Information",
"Host.Aggregator": "Information"
}
}
},
"applicationInsights": {
"sampling": {
"isEnabled": true,
"maxTelemetryItemsPerSecond": 5
}
},
"serviceBus": {
"maxConcurrentCalls": 32
}
}
Likely related is this error from Application Insights as well.
[
Has anyone else had this or similar issues?
If you follow the link from exception https://aka.ms/functions-thresholds, you will see the following limitation:
Connections : Number of outbound connections (limit is 300). For information on handling connection limits, see Managing Connections.
You are likely to have hit that one.
In each function call you create a new instance of MandrillApi. You haven't mentioned which library you are using, but I suspect it's creating a new connection for each instance of MandrillApi.
I checked Mandrill Dot Net and yes, it's creating a new HttpClient for each instance:
_httpClient = new HttpClient
{
BaseAddress = new Uri(BaseUrl)
};
Managing Connections recommends:
In many cases, this connection limit can be avoided by re-using client instances rather than creating new ones in each function. .NET clients like the HttpClient, DocumentClient, and Azure storage clients can manage connections if you use a single, static client. If those clients are re-instantiated with every function invocation, there is a high probability that the code is leaking connections.
Check the documentation of that library if API client is thread-safe, and reuse it between the function invocations if so.
Here is the scenario
At the start,
Ready Queue : 2
UnAcked: 0
Once the consumer.Queue.Dequeue(1000, out bdea); runs,
ReadyQueue: 1
UnAcked: 1
This is obvious, where we read one message and not Acknowledged yet.
Problem is that when the channel.BasicAck(bdea.DeliveryTag, false); runs,
ReadyQueue: 0
UnAcked: 1
Message which was in the Ready state became UnAcked and ReadyQueue becomes "0" !!
Now, in the while loop, when we look for the second message with consumer.Queue.Dequeue(1000, out bdea);, bdea returns null as there is nothing in the Ready state.
This is the issue, when there an Ack happens, always it drags a message from the Ready queue to UnAck. Therefore the next time I am loosing this UnAcked message which was never dequeued.
But if I stop the process (Console App), UnAck message goes back to Ready State.
Assume there are 10 messages in Ready state at the start, at the end it will only process 5 where you find 5 messages in UnAcked state. Each Ack makes the next message UnAck. If I stop and run again (5 messages in Ready state), guess what, 3 messages will gets processed, 2 will be UnAcked. (Dequeue only picks half of the no of messages)
Here is my code (code which only has the RabbitMQ functionality, issue is there if you try this code as well),
public class TestMessages
{
private ConnectionFactory factory = new ConnectionFactory();
string billingFileId = string.Empty;
private IConnection connection = null;
private IModel channel = null;
public void Listen()
{
try
{
#region CONNECT
factory.AutomaticRecoveryEnabled = true;
factory.UserName = ConfigurationManager.AppSettings["MQUserName"];
factory.Password = ConfigurationManager.AppSettings["MQPassword"];
factory.VirtualHost = ConfigurationManager.AppSettings["MQVirtualHost"];
factory.HostName = ConfigurationManager.AppSettings["MQHostName"];
factory.Port = Convert.ToInt32(ConfigurationManager.AppSettings["MQPort"]);
#endregion
RabbitMQ.Client.Events.BasicDeliverEventArgs bdea;
using (connection = factory.CreateConnection())
{
string jobId = string.Empty;
using (IModel channel = connection.CreateModel())
{
while (true) //KEEP LISTNING
{
if (!channel.IsOpen)
throw new Exception("Channel is closed"); //Exit the loop.
QueueingBasicConsumer consumer = new QueueingBasicConsumer(channel);
//Prefetch 1 message
channel.BasicQos(0, 1, false);
String consumerTag = channel.BasicConsume(ConfigurationManager.AppSettings["MQQueueName"], false, consumer);
try
{
//Pull out the message
consumer.Queue.Dequeue(1000, out bdea);
if (bdea == null)
{
//Empty Queue
}
else
{
IBasicProperties props = bdea.BasicProperties;
byte[] body = bdea.Body;
string message = System.Text.Encoding.Default.GetString(bdea.Body);
try
{
channel.BasicAck(bdea.DeliveryTag, false);
////Heavy work starts now......
}
catch (Exception ex)
{
//Log
}
}
}
catch (Exception ex)
{
//Log it
}
}
}
}
}
catch (Exception ex)
{
WriteLog.Error(ex);
}
finally
{
//CleanUp();
}
}
}
Am I missing something?
I tried with the "Subscription" rather than the Channel and it works now, clears up the message queue. I referred to this post.
Here is the working code:
public void SubscribeListner()
{
Subscription subscription = null;
const string uploaderExchange = "myQueueExchange";
string queueName = "myQueue";
while (true)
{
try
{
if (subscription == null)
{
try
{
//CONNECT Code
//try to open connection
connection = factory.CreateConnection();
}
catch (BrokerUnreachableException ex)
{
//You probably want to log the error and cancel after N tries,
//otherwise start the loop over to try to connect again after a second or so.
//log.Error(ex);
continue;
}
//crate chanel
channel = connection.CreateModel();
// This instructs the channel not to prefetch more than one message
channel.BasicQos(0, 1, false);
// Create a new, durable exchange
channel.ExchangeDeclare(uploaderExchange, ExchangeType.Direct, true, false, null);
// Create a new, durable queue
channel.QueueDeclare(queueName, true, false, false, null);
// Bind the queue to the exchange
channel.QueueBind(queueName, uploaderExchange, queueName);
//create subscription
subscription = new Subscription(channel, uploaderExchange, false);
}
BasicDeliverEventArgs eventArgs;
var gotMessage = subscription.Next(250, out eventArgs);//250 millisecond
if (gotMessage)
{
if (eventArgs == null)
{
//This means the connection is closed.
//DisposeAllConnectionObjects();
continue;//move to new iterate
}
//process message
subscription.Ack();
//channel.BasicAck(eventArgs.DeliveryTag, false);
}
}
catch (OperationInterruptedException ex)
{
//log.Error(ex);
//DisposeAllConnectionObjects();
}
catch(Exception ex)
{
}
}
}
I read the messages from one queue to another queue. However my correlation ids are not preserved.
If the correlation id is "ABC12345" for a message in the import queue, when i put it into the export queue, the value of the correlation id is different.
How do i keep the same correlation id between the 2 queues and always
have a unique message id?
Get:
mqQueue.Get(mqMsg);
string messageID = Convert.ToString(mqMsg.MessageId);
string correlationID = Convert.ToString(mqMsg.CorrelationId);
If for example if the correlation id is "000123456789", then after read, while putting it back , the value gets changed for the same message.
Put:
mqMsg.CorrelationId = System.Text.Encoding.UTF8.GetBytes(correlationID);
mqQueue.Put(mqMsg, mqPutMsgOpts);
I am using MQ PUT and GET options via MQ.NET classes.
The code snippet below preserves the correlation id when I put message to another queue. In my sample I do the following:
1) Put a message to importQ with unique correlation ID.
2) Get that message from importQ.
3) Put the received message to exportQ
public static void preserveCorreLid()
{
Hashtable mqProps = new Hashtable();
MQQueueManager qm = null;
String strCorrelId = "00123456789";
try
{
mqProps.Add(MQC.TRANSPORT_PROPERTY, MQC.TRANSPORT_MQSERIES_MANAGED);
mqProps.Add(MQC.CHANNEL_PROPERTY, "NET.CLIENT.CHL");
mqProps.Add(MQC.HOST_NAME_PROPERTY, "localhost");
mqProps.Add(MQC.PORT_PROPERTY, 2099);
qm = new MQQueueManager("QM", mqProps);
MQQueue importQ = qm.AccessQueue("IMPORTQ", MQC.MQOO_INPUT_SHARED |MQC.MQOO_OUTPUT | MQC.MQOO_FAIL_IF_QUIESCING );
MQMessage mqPutMsg = new MQMessage();
mqPutMsg.WriteString("This is an import message");
mqPutMsg.CorrelationId = System.Text.Encoding.UTF8.GetBytes(strCorrelId);
MQPutMessageOptions mqpmo = new MQPutMessageOptions();
importQ.Put(mqPutMsg,mqpmo);
MQMessage respMsg = new MQMessage();
MQGetMessageOptions gmo = new MQGetMessageOptions();
gmo.WaitInterval = 3000;
gmo.Options = MQC.MQGMO_WAIT;
try
{
importQ.Get(respMsg, gmo);
}
catch (MQException ex)
{
Console.Write(ex);
Console.WriteLine("Queue Name : " + importQ.Name + ":");
}
importQ.Close();
MQQueue exportQ = qm.AccessQueue("EXPORTQ", MQC.MQOO_OUTPUT | MQC.MQOO_FAIL_IF_QUIESCING);
exportQ.Put(respMsg);
exportQ.Close();
qm.Disconnect();
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
}
This line of code gets me the correlation id
correlationID = System.Text.Encoding.UTF8.GetString(mqMsg.CorrelationId);