I just installed MonoDevelop 5.0.1 in Ubuntu 12.04 and tried to compile a simple Hello World.
This results in the following build error:
Error CS1617: Invalid -langversion option `Version5'. It must be `ISO-1', `ISO-2', `3', `4', `5', `Default' or `Future' (CS1617)
I looked through the options and everything I found seems to be set up correctly. Edit>Preferences>Projects>.NET Runtimes has Mono 3.2.1 included.
The only section I cannot access is Project>Project Options>Build>General, which causes an Exception to be thrown:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Exception: Unknown LangVersion string ''
at MonoDevelop.CSharp.Project.CSharpCompilerParameters.get_LangVersion () [0x00000] in <filename unknown>:0
at MonoDevelop.CSharp.Project.CompilerOptionsPanelWidget..ctor (MonoDevelop.Projects.DotNetProject project) [0x00000] in <filename unknown>:0
at MonoDevelop.CSharp.Project.CompilerOptionsPanel.CreatePanelWidget () [0x00000] in <filename unknown>:0
at MonoDevelop.Ide.Gui.Dialogs.OptionsDialog.CreatePageWidget (MonoDevelop.Ide.Gui.Dialogs.SectionPage page) [0x00000] in <filename unknown>:0
at MonoDevelop.Ide.Gui.Dialogs.OptionsDialog.ShowPage (MonoDevelop.Ide.Extensions.OptionsDialogSection section) [0x00000] in <filename unknown>:0
at MonoDevelop.Ide.Gui.Dialogs.OptionsDialog.OnSelectionChanged (System.Object s, System.EventArgs a) [0x00000] in <filename unknown>:0
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0
at System.Reflection.MethodBase.Invoke (System.Object obj, System.Object[] parameters) [0x00000] in <filename unknown>:0
at System.Delegate.DynamicInvokeImpl (System.Object[] args) [0x00000] in <filename unknown>:0
at System.MulticastDelegate.DynamicInvokeImpl (System.Object[] args) [0x00000] in <filename unknown>:0
at System.Delegate.DynamicInvoke (System.Object[] args) [0x00000] in <filename unknown>:0
at GLib.Signal.ClosureInvokedCB (System.Object o, GLib.ClosureInvokedArgs args) [0x00000] in <filename unknown>:0
at GLib.SignalClosure.Invoke (GLib.ClosureInvokedArgs args) [0x00000] in <filename unknown>:0
at GLib.SignalClosure.MarshalCallback (IntPtr raw_closure, IntPtr return_val, UInt32 n_param_vals, IntPtr param_values, IntPtr invocation_hint, IntPtr marshal_data) [0x00000] in <filename unknown>:0
The same error already occurred in MonoDevelop 2.something from the Ubuntu package manager.
I can't help you with the solution may be, but I can give you why this is happening -
Please visit this links -
The reason http://msdn.microsoft.com/en-us/library/ydy7a2we(v=vs.90).aspx
Mono Develop System Requirements.
http://monodevelop.com/developers/building_monodevelop
Make sure that MonoDeveloper supports the Mono version you are using.
I (think I) found the issue and now it appears to be working correctly. Apparently, one of the project files was corrupted for some reason. Deleting the old project and creating a new one helped.
Related
I am getting the following message, which I'm not able to track down to a configuration. There are some relevant articles, but none seem to answer.
Build failed. Unknown LangVersion string ' '
If I look at the build properties for the project, it throws an exception, which appears to be the cause of the build error:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Exception: Unknown LangVersion string ''
at MonoDevelop.CSharp.Project.CSharpCompilerParameters.get_LangVersion () [0x00000] in <filename unknown>:0
at MonoDevelop.CSharp.Project.CompilerOptionsPanelWidget..ctor (MonoDevelop.Projects.DotNetProject project) [0x00000] in <filename unknown>:0
at MonoDevelop.CSharp.Project.CompilerOptionsPanel.CreatePanelWidget () [0x00000] in <filename unknown>:0
at MonoDevelop.Ide.Gui.Dialogs.OptionsDialog.CreatePageWidget (MonoDevelop.Ide.Gui.Dialogs.SectionPage page) [0x00000] in <filename unknown>:0
at MonoDevelop.Ide.Gui.Dialogs.OptionsDialog.ShowPage (MonoDevelop.Ide.Extensions.OptionsDialogSection section) [0x00000] in <filename unknown>:0
at MonoDevelop.Ide.Gui.Dialogs.OptionsDialog.OnSelectionChanged (System.Object s, System.EventArgs a) [0x00000] in <filename unknown>:0
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0
at System.Reflection.MethodBase.Invoke (System.Object obj, System.Object[] parameters) [0x00000] in <filename unknown>:0
at System.Delegate.DynamicInvokeImpl (System.Object[] args) [0x00000] in <filename unknown>:0
at System.MulticastDelegate.DynamicInvokeImpl (System.Object[] args) [0x00000] in <filename unknown>:0
at System.Delegate.DynamicInvoke (System.Object[] args) [0x00000] in <filename unknown>:0
at GLib.Signal.ClosureInvokedCB (System.Object o, GLib.ClosureInvokedArgs args) [0x00000] in <filename unknown>:0
at GLib.SignalClosure.Invoke (GLib.ClosureInvokedArgs args) [0x00000] in <filename unknown>:0
at GLib.SignalClosure.MarshalCallback (IntPtr raw_closure, IntPtr return_val, UInt32 n_param_vals, IntPtr param_values, IntPtr invocation_hint, IntPtr marshal_data) [0x00000] in <filename unknown>:0
Do I have to indicate a language somewhere in monodevelop settings? Is this spoken language or a programming language?
I was able to fix this by upgrading to Mono 5.10
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF
echo "deb http://download.mono-project.com/repo/ubuntu trusty main" | sudo tee /etc/apt/sources.list.d/mono-official.list
sudo apt-get update
sudo apt-get install mono-devel
I'm trying to implement the $p library to recognize gestures for spell casting in a game but I'm getting a Unhandled Exception. I'm using the precompile dll I got from their website and its compiled in the .Net 4 framework, so I'm guessing this is where the problem is coming from. Here is the error:
Unhandled Exception: System.Reflection.ReflectionTypeLoadException: The classes in the module cannot be loaded.
at (wrapper managed-to-native) System.Reflection.Assembly:GetTypes (bool)
at System.Reflection.Assembly.GetTypes () [0x00000] in <filename unknown>:0
at Mono.CSharp.RootNamespace.ComputeNamespaces (System.Reflection.Assembly assembly, System.Type extensionType) [0x00000] in <filename unknown>:0
at Mono.CSharp.RootNamespace.ComputeNamespace (Mono.CSharp.CompilerContext ctx, System.Type extensionType) [0x00000] in <filename unknown>:0
at Mono.CSharp.GlobalRootNamespace.ComputeNamespaces (Mono.CSharp.CompilerContext ctx) [0x00000] in <filename unknown>:0
at Mono.CSharp.Driver.LoadReferences () [0x00000] in <filename unknown>:0
at Mono.CSharp.Driver.Compile () [0x00000] in <filename unknown>:0
at Mono.CSharp.Driver.Main (System.String[] args) [0x00000] in <filename unknown>:0
Missing method .ctor in assembly C:\Users\Uri\Desktop\GestureSpell\GestureSpell\Assets\PDollarGestureRecognizer.dll, type System.Runtime.Versioning.TargetFrameworkAttribute
The class System.Runtime.Versioning.TargetFrameworkAttribute could not be loaded, used in PDollarGestureRecognizer
Can't find custom attr constructor image: C:\Users\Uri\Desktop\GestureSpell\GestureSpell\Assets\PDollarGestureRecognizer.dll mtoken: 0x0a00000d
You can try changing true to false in your .csproj file. That helps in some cases.
I'm working on a school project and I'm trying to log data that is stored from a game that I made in unity.
My problem is that I want to email the data true the app. Everything works fine, email is sending with the data etc. But when I build the app to an iOS device it is not sending the email.
I do not have any errors in unity but I get this error in Xcode when I build the app.See the error below. I hope someone can help me.
Greetings,
Georgi Iliev
MissingMethodException: Method not found: 'Default constructor not found...ctor() of System.Net.Configuration.MailSettingsSectionGroup'.
at Mono.Security.Authenticode.AuthenticodeBase.GetSecurityEntry () [0x00000] in <filename unknown>:0
at System.Activator.CreateInstance (System.Type type, System.Object[] args) [0x00000] in <filename unknown>:0
at System.Configuration.Configuration.GetSectionGroupInstance (System.Configuration.SectionGroupInfo group) [0x00000] in <filename unknown>:0
at System.Configuration.ConfigurationSectionGroupCollection.get_Item (System.String name) [0x00000] in <filename unknown>:0
at System.Configuration.Configuration.GetSection (System.String path) [0x00000] in <filename unknown>:0
at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection (System.String configKey) [0x00000] in <filename unknown>:0
at System.Configuration.ConfigurationManager.GetSection (System.String sectionName) [0x00000] in <filename unknown>:0
at System.Net.Mail.SmtpClient..ctor (System.String host, Int32 port) [0x00000] in <filename unknown>:0
at MonoGmail.Start () [0x00000] in <filename unknown>:0
(Filename: currently not available on il2cpp Line: -1)
added #programmers solution and got a new mixed error.
MissingMethodException: Method not found: 'Default constructor not found...ctor() of System.Net.Configuration.MailSettingsSectionGroup'.
at StartMenu.CloseApp () [0x00000] in <filename unknown>:0
at System.Activator.CreateInstance (System.Type type, Boolean nonPublic) [0x00000] in <filename unknown>:0
at System.Configuration.ConfigInfo.CreateInstance () [0x00000] in <filename unknown>:0
at System.Collections.Generic.Comparer`1[T].get_Default () [0x00000] in <filename unknown>:0
at System.Configuration.Configuration.GetSectionGroupInstance (System.Configuration.SectionGroupInfo group) [0x00000] in <filename unknown>:0
at System.Configuration.ConfigurationSectionGroupCollection.get_Item (System.String name) [0x00000] in <filename unknown>:0
at System.Configuration.Configuration.GetSection (System.String path) [0x00000] in <filename unknown>:0
at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection (System.String configKey) [0x00000] in <filename unknown>:0
at System.MonoTODOAttribute..ctor () [0x00000] in <filename unknown>:0
at System.Configuration.ConfigurationManager.GetSection (System.String sectionName) [0x00000] in <filename unknown>:0
at System.Net.Mail.SmtpClient..ctor (System.String host, Int32 port) [0x00000] in <filename unknown>:0
at System.Net.Mail.SmtpClient..ctor (System.String host) [0x00000] in <filename unknown>:0
at Mono_Gmail.Start () [0x00000] in <filename unknown>:0
at System.Array.GetGenericValueImpl[T] (Int32 pos, .T& value) [0x00000] in <filename unknown>:0
at System.Array.GetGenericValueImpl[T] (Int32 pos, .T& value) [0x00000] in <filename unknown>:0
at System.Array.GetGenericValueImpl[T] (Int32 pos, .T& value) [0x00000] in <filename unknown>:0
at System.Array.GetGenericValueImpl[T] (Int32 pos, .T& value) [0x00000] in <filename unknown>:0
System.Array:GetGenericValueImpl(Int32, T&)
System.Array:GetGenericValueImpl(Int32, T&)
System.Array:GetGenericValueImpl(Int32, T&)
System.Array:GetGenericValueImpl(Int32, T&)
(Filename: currently not available on il2cpp Line: -1)
This is a bug in IL2CPP. Unity does not have any plan to fix this issue any time soon because there is a temporary solution to fix it.
In your link.xml, add the following to it.
<linker>
<assembly fullname="System">
<type fullname="System.Net.Configuration.MailSettingsSectionGroup" preserve="all"/>
<type fullname="System.Net.Configuration.SmtpSection" preserve="all"/>
<type fullname="System.Net.Configuration.SmtpNetworkElement" preserve="all"/>
</assembly>
</linker>
It is basically telling Xcode to not strip these mail stuff out.
If you don't have link.xml, create it and put the code above in it then place the file in the Asset folder. Rebuild the project.
EDIT:
According to a comment below, it is now required to add the line below too:
<type fullname="System.Net.Configuration.SmtpSpecifiedPickupDirectoryElement" preserve="all"/>
We're creating a game for iOS and android using Unity3d (version 5.0.1p1), and since we are using Parse.com data services we naturally went with it to implement the remote push notifications.
The problem is that after building the game and running it on a test device (iPhone 4s iOS8.1.2) we get at game start an execution engine exception that we cant figure out. Here is the exception :
ExecutionEngineException: Attempting to call method
'System.Reflection.MonoProperty::StaticGetterAdapterFrame' for which no ahead of time (AOT) code was
generated.
at System.Reflection.EventInfo+AddEventAdapter.Invoke (System.Object
_this, System.Delegate dele)
[0x00000] in <filename unknown>:0
at System.Reflection.MonoProperty+GetterAdapter.Invoke (System.Object
_this) [0x00000] in <filename
unknown>:0
at AOGenerator.BlurBuffer () [0x00000] in <filename unknown>:0
at System.Reflection.MonoProperty.GetValue (System.Object obj, System.Object[] index) [0x00000] in
<filename unknown>:0
at Newtonsoft.Json.Bson.BsonRegex.get_Type () [0x00000] in <filename unknown>:0
at Parse.ParseInstallation.get_Badge () [0x00000] in <filename unknown>:0
at Parse.ParseInstallation.SetPlatformAutomaticValue () [0x00000] in <filename unknown>:0
at Parse.ParseInstallation.SetAutomaticValues () [0x00000] in <filename unknown>:0
at Parse.ParseInstallation.SaveAsync (System.Threading.Tasks.Task toAwait, CancellationToken
cancellationToken) [0x00000] in <filename unknown>:0
at Parse.PlatformHooks+<>c__DisplayClass38.<RequestAsync>b__33 (System.Threading.Tasks.Task`1 _)
[0x00000] in <filename unknown>:0
at Parse.ParseObject+<>c__DisplayClass18.<SaveAsync>b__17 (System.Threading.Tasks.Task toAwait)
[0x00000] in <filename unknown>:0
at FlurryAnalyticsIOS.SetSessionTimeout (Int32 seconds) [0x00000] in <filename unknown>:0
at
System.Collections.Generic.Dictionary`2[System.Int64,System.Boolean].Do_ICollectionCopyTo[KeyValuePair`2]
(System.Array array, Int32 index, System.Collections.Generic.Transform`1 transform) [0x00000] in <filename
unknown>:0
at Parse.Internal.TaskQueue.Enqueue[Task] (System.Func`2 taskStart, CancellationToken cancellationToken)
[0x00000] in <filename unknown>:0
at Parse.ParseObject.SaveAsync (CancellationToken cancellationToken) [0x00000] in <filename unknown>:0
at Parse.ParseObject.SaveAsync () [0x00000] in <filename unknown>:0
at Parse.ParseInitializeBehaviour.<Awake>b__0 (System.Byte[] deviceToken) [0x00000] in <filename
unknown>:0
at FlurryAnalyticsIOS.SetSessionTimeout (Int32 seconds) [0x00000] in <filename unknown>:0
at Newtonsoft.Json.Bson.BsonRegex.get_Type () [0x00000] in <filename unknown>:0
at Parse.PlatformHooks+<>c__DisplayClass24.<RegisterDeviceTokenRequest>b__22 () [0x00000] in
<filename unknown>:0
at System.Action.Invoke () [0x00000] in <filename unknown>:0
at Newtonsoft.Json.Bson.BsonRegex.get_Type () [0x00000] in <filename unknown>:0
at Parse.PlatformHooks+<RunDispatcher>d__44.MoveNext () [0x00000] in <filename unknown>:0
at System.Nullable`1[System.DateTimeOffset].ToString () [0x00000] in <filename unknown>:0
System.Nullable`1:ToString()
UnityEngine.Debug:Internal_LogException(Exception, Object)
UnityEngine.Debug:LogException(Exception)
Parse.<RunDispatcher>d__44:MoveNext()
System.Nullable`1:ToString()
The problem just appeared with the new Unity Parse SDK 1.5 (which contains the PNS feature). What we know is that running an empty project with just the parse sdk goes fine and the notifications work just fine, but in our actual project, because of the exception, devices dont register for the notifications in parse, so we are assuming there is a kind of a conflict between parse and one of the other tools we are using.
FYI : We are building the game using IL2CPP for a universal architecture (we re also building with .Net 2.0 subset, but I dont think that this has something to do with the problem).
Thank you for your time and for your answers.
UPDATE ::
We tried to build using Mono(2.x) this time and we have pretty much the same exception that turned into this :
ExecutionEngineException: Attempting to JIT compile method
'System.Reflection.MonoProperty:StaticGetterAdapterFrame
(System.Reflection.MonoProperty/StaticGetter`1,object)' while
running with aotonly.
at System.Reflection.MonoProperty.GetValue (System.Object obj,
System.Object[] index)
[0x00000] in :0
at Parse.ParseInstallation.get_Badge () [0x00000] in :0
at Parse.ParseInstallation.SetPlatformAutomaticValue () [0x00000] in
unknown>:0
at Parse.ParseInstallation.SetAutomaticValues () [0x00000] in
:0
at Parse.ParseInstallation.SaveAsync (System.Threading.Tasks.Task
toAwait,
CancellationToken cancellationToken) [0x00000] in :0
at Parse.ParseObject+<>c__DisplayClass18.b__17
(System.Threading.Tasks.Task toAwait) [0x00000] in :0
at Parse.Internal.TaskQueue.Enqueue[Task] (System.Func`2 taskStart,
CancellationToken
cancellationToken) [0x00000] in :0
at Parse.ParseObject.SaveAsync (CancellationToken cancellationToken)
[0x00000] in
:0
at Parse.ParseObject.SaveAsync () [0x00000] in :0
at Parse.ParseInitializeBehaviour.b__0 (System.Byte[]
deviceToken) [0x00000] in
:0
at
Parse.PlatformHooks+<>c__DisplayClass24.b__22
()
[0x00000] in :0
at Parse.PlatformHooks+d__44.MoveNext () [0x00000] in
unknown>:0
UnityEngine.Debug:Internal_LogException(Exception, Object)
UnityEngine.Debug:LogException(Exception)
Parse.d__44:MoveNext()
Hopes it bring you guys more details about the problem.
Update 2 ::
We know exactly what causes the exception to happen and unfortunately we have no control over it, its when we register for notification, we do it this way :
using NotificationServices = UnityEngine.iOS.NotificationServices;
using NotificationType = UnityEngine.iOS.NotificationType;
/*
.
.
.
*/
void ACalledFunction ()
{
// Ask for permission for push notifications (Can Receive deviceToken)
#if UNITY_IPHONE
NotificationServices.RegisterForNotifications(
NotificationType.Alert |
NotificationType.Badge |
NotificationType.Sound);
#endif
}
}
UPDATE 15/06/2015 : Parse Unity SDK 1.5.1 (il2cpp scripting backend)
We re still having the same error when trying to register for parse PNs :
ExecutionEngineException: Attempting to call method
'System.Reflection.MonoProperty::StaticGetterAdapterFrame' for which
no ahead of time (AOT) code was generated.
System.Reflection.MonoProperty+GetterAdapter.Invoke (System.Object
_this) System.Reflection.MonoProperty+GetterAdapter.Invoke (System.Object _this) CurvedText.OnRectTransformDimensionsChange ()
System.Reflection.MonoProperty.GetValue (System.Object obj,
System.Object[] index)
Newtonsoft.Json.Bson.BsonString.set_IncludeLength (Boolean value)
Parse.ParseInstallation.get_Badge ()
Parse.ParseInstallation.SetPlatformAutomaticValue ()
Parse.ParseInstallation.SetAutomaticValues ()
Parse.ParseInstallation.SaveAsync (System.Threading.Tasks.Task
toAwait, CancellationToken cancellationToken)
Parse.PlatformHooks+<>c__DisplayClass42.b__36 (System.Object _)
Parse.ParseObject+<>c__DisplayClass18.b__17
(System.Threading.Tasks.Task toAwait)
FlurryAnalyticsIOS.SetSessionTimeout (Int32 seconds)
Parse.ParseObject.SetProperty[ParseACL] (Parse.ParseACL value,
System.String propertyName) Parse.Internal.TaskQueue.Enqueue[Task]
(System.Func2 taskStart, CancellationToken cancellationToken)
Parse.ParseObject.SaveAsync (CancellationToken cancellationToken)
Parse.ParseObject.SaveAsync () Parse.ParseInitializeBehaviour.b__0
(System.Byte[] deviceToken) FlurryAnalyticsIOS.SetSessionTimeout
(Int32 seconds) Newtonsoft.Json.Bson.BsonString.set_IncludeLength
(Boolean value) Parse.PlatformHooks+<>c__DisplayClass24.b__22 ()
System.Action.Invoke ()
Newtonsoft.Json.Bson.BsonString.set_IncludeLength (Boolean value)
Parse.PlatformHooks+d__44.MoveNext ()
System.Array+InternalEnumerator1[System.UInt64].get_Current ()
UnityEngine.Debug:LogException(Exception) Parse.d__44:MoveNext()
System.InternalEnumerator`1:get_Current()
It is possible to use reflection with AOT builds (both using the Mono scripting backend and the IL2CPP scripting backend). The restriction is really on using anything in the System.Reflection.Emit namespace.
Some parts of the mscorlib.dll assembly that ship with the Unity version of Mono are not friendly to AOT code paths, and System.Reflection.MonoProperty::StaticGetterAdapterFrame is one of them. This code won't work with an AOT build, but unfortunately it is not something that Unity can determine at compile time, so the error will only happen at runtime.
This is probably an issue to bring up on the Parse SDK forums. It may be that the SDK can be used differently to avoid this issue.
Another issue dealing with MonoMac. I cant even create a bundle, if I do so I get this error.
Creating app bundle
Contents/Info.plist
Contents/PkgInfo
Contents/Resources/MainMenu.nib
Contents/Resources/MainWindow.nib
Contents/Resources/PrefForm.nib
Contents/Resources/SearchForm.nib
Contents/Resources/StreamInformation.nib
Contents/Resources/sd.icns
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/categories.pbxbtree
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/cdecls.pbxbtree
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/decls.pbxbtree
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/files.pbxbtree
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/imports.pbxbtree
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/pbxindex.header
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/protocols.pbxbtree
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/refs.pbxbtree
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/subclasses.pbxbtree
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/symbols0.pbxsymbols
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/strings.pbxstrings/control
Contents/Resources/build/StreamDesk.build/StreamDesk.pbxindex/strings.pbxstrings/strings
Merging Mono into app bundle
/Applications/MonoDevelop.app/Contents/MacOS/lib/monodevelop/AddIns/MonoDevelop.MonoMac/mmp -o "/tmp/monomac-build-634642319384392990" -n "StreamDesk" -a "/Users/michaelmanley/Desktop/NasuTek-StreamDesk/libstreamdesk/Managed/StreamDesk.Core/bin/Debug/StreamDesk.Managed.dll" -a "/Library/Frameworks/Mono.framework/Versions/2.10.8/lib/mono/4.0/System.dll" -a "/Library/Frameworks/Mono.framework/Versions/2.10.8/lib/mono/4.0/System.Xml.dll" -a "/Library/Frameworks/Mono.framework/Versions/2.10.8/lib/mono/4.0/System.Core.dll" -a "/Library/Frameworks/Mono.framework/Versions/2.10.8/lib/mono/4.0/System.Xml.Linq.dll" -a "/Library/Frameworks/Mono.framework/Versions/2.10.8/lib/mono/4.0/System.Drawing.dll" -a "/Applications/MonoDevelop.app/Contents/MacOS/lib/monodevelop/AddIns/MonoDevelop.MonoMac/MonoMac.dll" -a "/Library/Frameworks/Mono.framework/Versions/2.10.8/lib/mono/4.0/System.Data.dll" -a "/Library/Frameworks/Mono.framework/Versions/2.10.8/lib/mono/4.0/System.Data.DataSetExtensions.dll" -a "/Users/michaelmanley/Desktop/NasuTek-StreamDesk/3rdParty/Mono.Addins.dll" "/Users/michaelmanley/Desktop/NasuTek-StreamDesk/StreamDesk-Cocoa/bin/Debug/StreamDesk.exe"
Could not link assemblies: System.ArgumentException: Member 'System.Int32 Mono.Addins.Database.SetupProcess::Main(System.String[])' is declared in another module and needs to be imported
at Mono.Cecil.MetadataBuilder.LookupToken (IMetadataTokenProvider provider) [0x00000] in <filename unknown>:0
at Mono.Cecil.MetadataBuilder.BuildModule () [0x00000] in <filename unknown>:0
at Mono.Cecil.MetadataBuilder.BuildMetadata () [0x00000] in <filename unknown>:0
at Mono.Cecil.ModuleWriter.<BuildMetadata>b__0 (Mono.Cecil.MetadataBuilder builder, Mono.Cecil.MetadataReader _) [0x00000] in <filename unknown>:0
at Mono.Cecil.ModuleDefinition.Read[MetadataBuilder,MetadataBuilder] (Mono.Cecil.MetadataBuilder item, System.Func`3 read) [0x00000] in <filename unknown>:0
at Mono.Cecil.ModuleWriter.BuildMetadata (Mono.Cecil.ModuleDefinition module, Mono.Cecil.MetadataBuilder metadata) [0x00000] in <filename unknown>:0
at Mono.Cecil.ModuleWriter.WriteModuleTo (Mono.Cecil.ModuleDefinition module, System.IO.StreamFailed to link /Users/michaelmanley/Desktop/NasuTek-StreamDesk/StreamDesk-Cocoa/bin/Debug/StreamDesk.exe
stream, Mono.Cecil.WriterParameters parameters) [0x00000] in <filename unknown>:0
at Mono.Cecil.ModuleDefinition.Write (System.IO.Stream stream, Mono.Cecil.WriterParameters parameters) [0x00000] in <filename unknown>:0
at Mono.Cecil.ModuleDefinition.Write (System.String fileName, Mono.Cecil.WriterParameters parameters) [0x00000] in <filename unknown>:0
at Mono.Cecil.AssemblyDefinition.Write (System.String fileName, Mono.Cecil.WriterParameters parameters) [0x00000] in <filename unknown>:0
at Mono.Linker.Steps.OutputStep.OutputAssembly (Mono.Cecil.AssemblyDefinition assembly) [0x00000] in <filename unknown>:0
at Mono.Linker.Steps.OutputStep.ProcessAssembly (Mono.Cecil.AssemblyDefinition assembly) [0x00000] in <filename unknown>:0
at Mono.Linker.Steps.BaseStep.Process (Mono.Linker.LinkContext context) [0x00000] in <filename unknown>:0
at Mono.Linker.Pipeline.Process (Mono.Linker.LinkContext context) [0x00000] in <filename unknown>:0
at MonoMac.Tuner.Linker.Run (Mono.Linker.Pipeline pipeline, Mono.Linker.LinkContext context) [0x00000] in <filename unknown>:0
mmp exited with code 1
Merging Mono failed
I did include a build of Mono.Addins but theres nothing that even remotely calls such a function, and Im lost at why it WANTS that. Just not having a good day with Mono.
If you wanna have a shot the source code is at https://github.com/NasuTek/NasuTek-StreamDesk
I figured it out, when I use the option "Don't Link Assemblies" it works all well.