I have a solution with multiple projects in it (~400). A lot of them are using newtonsoft.json library. Some of them are using different version of the library. In a host project for web app, there is no direct reference to newtonsoft.json. Also, I believe, there are dependencies to packages that depend on newtonsoft.json. However, in bin folder of that project I began getting newtonsoft.json 9.0 instead of newtonsoft.json 11.0 as it used to be. And it causes load exception in runtime due to invalid version. If I include direct reference to newtonsoft.json 11.0, it still puts version 9.0 in the bin folder even if I clear all bin,obj folders. I use PackageReference for managing dependencies, and everything is in .net 4.6.1; I use binding redirects to resolve issues with different versions of the same library.
My question is if there is a way to diagnose how particular dll of package ref appears in bin folder? I would like to see some sort of comprehensive trace of dependency resolution so that I can fix it without using "trial and error" approach.
Upd.
Actually, thanks guys for pointing to structured logging. You are the best! So the issue was that one of the project had <OutputPath> pointing to the bin folder of the host project. So when the project was built, it was overriding binaries in the host project. Apparently, build order has changed due to continuous reference shuffling and the project with wrong <OutputPath> started building last. To find this out 1) I Newtonsoft.Json was recorded in DoubleWrites section 2) analyzing location from double writes I found out in _CopyFilesMarkedLocal section
Copying file from "\VenomousProject\bin\Debug\Newtonsoft.Json.dll" to "HostProject\bin\Debug\Newtonsoft.Json.dll".
That was it.
You can try MSBuild Binary and Structured Log Viewer (https://msbuildlog.com/)
build the project from command line with msbuild -bl - you will get msbuild.binlog
open the binlog with the log viewer and use the dll name as a search term
inspect all records related to the dll and backtrack a place (project and msbuild' target) where the wrong file version is taken.
With PackageReference, NuGet will write a file named project.assets.json in the project's obj folder. This file is used by the rest of the build to determine what files from packages should be included in the build, but it also contains a list of all the packages that were selected, what version was selected, and what dependencies each package has (package id and version). This is the closest thing to dependency resolving debugging that NuGet has.
In the file, search for "Newtonsoft.Json/, and you should find which version of Newtonsoft.Json that NuGet selected. Remove the / and replace it with ", and you can find all the packages that have dependencies on Newtonsoft.Josn. Search for newtonsoft.json.dll to find all the packages that ship that dll in its package (sometimes package authors perfer to ship multiple dlls in their package, rather than adding dependencies, which prevents NuGet from being able to version selection.
If there are multiple packages with which contain a dll with the same filename, NuGet will tell MSBuild about all of them, and it's up to MSBuild to select which one to use (pass to the compiler and copy to the bin/publish directory). As #Serg wrote in their answer, you can use binlogs (with the -bl argument on any MSBuild command, including dotnet restore or dotnet build). NuGet's inner workings are not output to MSBuild, so when your package graph has multiple packages that list Newtonsoft.Json as a dependency, it won't tell you why NuGet chose a specific version, but binlogs are very useful at debugging other build related issues.
I have a C# solution that contains two net472 projects: Foo.csproj, and Bar.csproj.
The projects are in classic format (no SDK version).
The projects use PackageRefernce as package management.
Foo.csproj depends on Bar.csproj.
Bar.csproj isn't a nuget package.
I want to create a nuget package of Foo.
I followed this instruction, and I execute the command msbuild -t:pack Foo.csproj, that produces the Foo.nupkg file.
The problem is that Foo.nupkg contains Foo.dll, but it doesn't contain Bar.dll.
So, when I try to install via NuGet the package Foo, I receive the following error:
Unable to resolve dependency 'Bar'.
What I'm missing?
I hope I have provided all the necessary info.
I had the same problem as explained above.
My goal was to automate Azure Devops nuget package generation of two dependant assemblies and publishing one NuGet package.
One of the steps in the Azure pipeline, actually includes execution of msbuild with -t:pack arguments.
After reading this thread: about advanced technics of creating NuGet packages, I've concluded that it's better to have 2 different packages.
So I have ended up with modifiying inital pipeline job with additional 2 steps ("set assembly manifest data" and "Copy files") as on the picture.
One set (of these steps) for A assembly and the other set for B assembly.
At the end result was two published Nuget packeges to the feed, where installation of A package in another project resulted auto installation of dependent B referenced package.
Hope this will help further others.
I created an MVC application in C#. I created a new project in my solution called PhoneDomain. The purpose of this is to separate my data and domain layer from the actual problem. I right clicked on the project and went to "Add Library Package Reference" and I attempted to add the EntityFramework package (version 4.3.1). It said "Operation Failed" "This package contains an init.ps1 file and needs to be installed from the Package Manager Console".
So I opened the Package Manager Console in Visual Studio and typed the following into the console window:
install-package EntityFramework -project PhoneDomain
After a couple seconds, it installed the package and said Successfully added 'EntityFramework 4.3.1' to PhoneDomain
The problem is, when I run my application, I get the following error message: Could not load file or assembly 'EntityFramework, Version=4.3.1.0, Culture=neutral' or one of its dependencies. The system cannot find the file specified.
The reference in the PhoneDomain is definately there and the the Copy Local property is set to True.
Can anyone tell me what is going on here?
Check your web.config for assembly references. There may be a rogue reference in there.
UPDATE:
Also make sure ALL projects have the necessary reference...
I'm trying to compile my excel addin using C# 4.0, and started to get this problem when building my project in Visual Studio. It's important to tell you that I haven't had this problem before. What could cause this to happen?
When I had this problem I fixed it by turning off the 'Enable ClickOnce security settings'.
Menu: Project | 'Project name' Properties... | Security tab | 'Enable ClickOnce security settings' check box.
My guess is that you're not working with strongly named assemblies. I've had this error when two projects reference slightly different versions of the same assembly and a more dependent project references these projects. The resolution in my case was to remove the key and version information from the assembly name in the .csproj files (it didn't matter anyway), and then do a clean build.
Changes between the different assembly versions were compatible with the parts of the solution referring to them. If this is not the case with you, you might have to do some more work to resolve the issue.
NuGet
With NuGet it's easy to get into this situation if:
You install a package to one project in your solution.
A new version of that package is deployed to the package source.
You install it to another project in the same solution.
This results in two projects in your solution referencing different versions of that package's assemblies. If one of them references the other and is a ClickOnce app, you'll see this problem.
To fix this, issue the update-package [package name] command at the Nuget Package Manager Console to bring everything up to a level playing field, at which point the problem goes away.
You should manage NuGet packages at the solution level rather than at the project level unless there is a compelling reason not to. Solution level package management avoids the potential of multiple versions of dependencies. When using the management UI, if the Consolidated tab shows 1 or more packages have multiple versions, consider consolidating them to one.
See this answer.
Go to the publish page and click on "Application Files". From there you should see a list of your DLL's. Ensure that the ones that are giving you trouble have their Publish Status marked as "Include" rather than "Prerequisite".
I've had this problem. It happened because i had many projects pointing to the same assembly but from different versions. I solve it selecting the same version to all projects in my solution.
If you have changed your assembly version or copied a different version of the managed library stated in the error you may also have previously compiled files referencing the wrong version. A 'Rebuild All' (or deleting you 'bin and 'obj' folders as mentioned in an earlier comment) should fix this case.
If you tried all the other answers in this question and you:
Have multiple projects in your solution
Have a project (Project A) that references another project (Project B), whose project references a NuGet package.
In Project A, you used Intellisense/ReSharper to bring in the reference to the NuGet package referenced in Project B (this can happen when a method in Project B returns a type provided by the NuGet package and that method is used in Project A)
updated the NuGet package via NuGet Package Manager (or CLI).
...you may have separate versions of the NuGet packages DLL in your projects' References, as the reference created by Intellisense/ReSharper will be a "normal" reference, and not a NuGet reference as expected, so the NuGet update process won't find or update it!
To fix this, remove the reference in Project A, then use NuGet to install it, and make sure the NuGet packages in all projects are the same version. (as explain in this answer)
Life Pro Tip:
This issue can come up whenever ReSharper/Intellisense suggests to add a reference to your project. It can be much more deeply convoluted than the example above, with multiple interweaving projects and dependencies making it hard to track down. If the reference being suggested by ReSharper/Intellisense is actually from a NuGet package, use NuGet to install it.
you need to sign the assembly with a key. Go in the project properties under the tab signing:
Adding my solution for this issue for anyone it might help.
I had a ClickOnce solution throwing this error. The app referenced a common "Libs" folder and contained a project reference to a Foo.dll. While none of the projects in the solution referenced the static copy of the Foo.dll in the "Libs" folder, some of the references in that folder did (ie: my solution had refs to Libs\Bar.dll which referenced Foo.dll.) Since the CO app pulled all the dependencies from Libs as well as their dependencies, both copies were going into the project. This was generating the error above.
I fixed the problem by moving my Libs\Foo.dll static version into a subfolder, Libs\Fix\Foo.dll. This change made the ClickOnce app use only the project version of the DLL and the error disappeared.
Deleting the DLL (where the error is occurred) and re-building the solution fixed my problem. Thanks
When this happened to me with the WindowsAPICodePack after I updated it, I just rebuilt the solution.
Build-->Rebuild Solution
I encountered this problem after migrating an Excel Addin from packages.config to PackageReference. Seems to be related to this issue.
The following works as a crude workaround if you're not using ClickOnce (it will omit all the dependency information from the .manifest file):
Unload project, edit .csproj
Find the section looking like this:
<!-- Include additional build rules for an Office application add-in. -->
<Import Project="$(VSToolsPath)\OfficeTools\Microsoft.VisualStudio.Tools.Office.targets" Condition="'$(VSToolsPath)' != ''" />
Edit a renamed copy of the referenced .targets file (in my case, the file resolved to C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\MSBuild\Microsoft\VisualStudio\v15.0\OfficeTools\Microsoft.VisualStudio.Tools.Office.targets and I made a copy Microsoft.VisualStudio.Tools.Office_FIX.targets in the same folder - didn't check if it works from a different folder).
Find the GenerateApplicationManifest element and change its attribute Dependencies="#(DependenciesForGam)" to Dependencies="".
Change the section found in 2. to reference your edited .targets file instead.
This will have to be repeated whenever the version of the .targets file shipped with VS is updated (or you won't get the updates), but I'm hoping it will be fixed soon...
There were too many projects in my solution to go through and individually update so I fixed this by:
Right-clicking my solution and selecting 'Manage NuGet Packages for Solution...'
Going to the Updates tab
Finding the affected package and selecting Update
Clicked OK and this brought all instances of the package up to date
Unloading and reloading the problem project solved it for me.
I went to publish, application files, found the dll throwing the error changed it to 'Include' from 'Include (Auto)'. I can now publish.
Is your assembly properly signed?
To check this, press Alt+Enter on your project (or right click, then Properties). Go to "Signing". Verify that the check box "Sign the assembly" is checked and the strong name key file is selected and "Delay sign only" is unchecked.
Now Here is a different approach to the problem:
Right click on the project and select the 'Unload Project' option. You will notice you project becomes unavailable.
Right click on the unavailable project and select the 'Edit' option.
Scroll down to the ' < ItemGroup > ' tag that contains all the resource tags.
Now go to the reference that has been displayed on the error list, you will notice it it uses a single tag (i.e. < Reference Include="assemble_name_here, Version=0.0.0.0, Culture=neutral" / >).
Change that to look as follows:
.
<Reference Include="assemble_name_here, Version=1.0.0.0, Culture=neutral, processorArchitecture=MSIL" >
< Private > True < / Private >
< HintPath > path_here\assemble_name_here.dll < / HintPath >
< / Reference >
Save your changes, Right click on the unavailable project again and click on the 'Reload Project' option, then build.
This is caused when you change the version of the .dll that is referenced. You need to delete all items, or the .dll in the target build folder.
I got the similar compiler error. Once I add the dependent project of the dll file to the solution, issue resolved.
If your main project using some library projects and have reference to them, you can cause this problem if your project reference to a assembly dll file instead to library project when you change something in your library project (ex: rename a class).
You can check all references to your main project by view in Object Browser window (menu View->Object Browser). A reference to a dll file always has a version number. Ex: TestLib [1.0.0.0]
Solution: delete the current reference of your main project to the library project and add reference to that library project again.
After trying most of the solutions here, I finally just added a reference to the project from the click once project, this changed it to Include (Auto) from Include and it finally worked.
What helped me was I went onto Package Manager Solution and looked at the installed package which was causing the issue. I saw that several projects were referencing the same package but different versions. I aligned them based on my needs and it worked.
I had this in a solution w/ 6 projects.
One of my projects was referring to the named assembly as a file reference. The others were all pointing to the project reference.
I usually get a different error in these cases.
My solution was to delete the named assembly anywhere it was referenced and add it back.
Once I worked through the project, ths problem disappeared.
Before doing this, I tried cleaning the solution as well as making sure none of the projects were signed.
hope it helps someone...
If its a mismatch of a dependencies dependencies, go to the NuGet package manager at the solution level and check the Update and Consolidate tabs, harmonise it all.
I recently hit this problem. In my case, I have NuGet packages on different assemblies. What I had was different versions of the same NuGet packages associated with my own assemblies.
My solution was to use the NuGet package manager upon the Solution, as opposed to the individual projects. This enables a "consolidation" option, where you can upgrade your NuGet packages across as many projects as you want - so they all reference the same version of the assembly.
When I did the consolidations, the build failure disappeared.
I also bump into kind of problem, all I just had to do is delete the .dll (can be found in reference) that causing the error and add it again.
Works like a charm.
Try with update-package -reinstall -ignoredependencies
Just go to Publish -> Application File -> And change the effected dll publish status from prerequisite to include!
This worked for me!
In my case, I upgraded the project to .net 4.7.2 but still built in old visual studio version (2015).
When i built the project in VS 2019, the build failure disappeared.