When recording CUIT in Visual Studio 2015 (C#), I click inside a WinRow (inside a property grid-view table) which enables the ellipse [...] button control to click and open a pop-up window. However, the button is only visible when the WinRow is selected. So on playback, the WinRow loses focus between steps and the button is no longer visible to be clicked.
Does anyone know how to keep the focus inside the WinRow to be able to see/click the button?
Well if the WinRow is defined in your UIMAp Designer file, then you should add a clik on it just before the click on the button to put again the focus on the Winrow first.
But you will have to handcode it in external cs file because any modification on the UIMap designer will be automatically removed at it first next update...
Note that a lot of recorded actions may not replay properly, mostly when you are in a dynamic behavior context, so you may have to handcode your automatisation to playback each needed actions.
I recently installed Visual Studio 2013 Professional, and found that in the Windows Forms Application project type I'm unable to move any controls on a form in design mode. I tested a few alternatives out and found the following:
Controls can be moved with the keyboard
Controls can be resized by dragging the keypoints on the outline of the control
Controls can be aligned using the commands in the Tools menu
Controls can be moved by setting the Location field manually in the designer property grid
Controls can be docked
Controls cannot be moved with the mouse
Furthermore, as you can see in the image below, the "cross" icon that indicates that the controls are movable is not visible on any controls.
I've tried the following, but have not yet been able to correct the issue:
Created a new project & solution (same issue)
Created a new form (same issue)
Verified that the Locked property of both the form and controls is set to False
Verified that the form inherits from Form (as expected, as this is a standard installation and the first time I've used it)
Googled for help (nothing that worked)
Any suggestions would be appreciated.
It took some time but I finally found a workaround, if not an answer. As it happens, periodically my computer will stop allowing me to drag-and-drop anything. The solution to this is to press the Esc (escape) key, which instantly restores functionality.
I had this happening using multiple monitors.
Move VS to the main monitor (1) and all will work fine.
Greetz
I know this is an older thread, but this problem still persists. I am putting this here because I think some of these may work for others. The top option works for me, but is by no means a permanent solution. It helps to get your project completed though. Design your forms on your main screen then move VS to your secondary monitor to code kinda thing. I work off a laptop, so I don't like working on a small screen.
Some steps are rudimentary, but I was trying to be thorough. Sometimes it's the simple solution.
Preliminary troubleshooting...
Moving VS to main monitor(1) - this worked for me, but still doesn't allow me to use my 2 monitors
Run installer, select Repair
Run and cancel your project
Press the Esc button and see if things return to normal
Right click form "Lock Controls". This should not have the blue outline, or right click on form/control>Lock Controls and make sure nothing is locked.
Rebuild project, close and open the form again.
Snap to grid setting - Tools>Options>Windows Form Designer>General
Restart VS with 100% scaling - drawing may be an issue. I am not convinced it is not here since it works on the main screen but not the 2nd or 3rd
Dock property set to none for form/controls
Moving items very slowly with mouse - another indication drawing may be an issue.
Controls may not be docked in the container in which they reside. Restart VS. Try double clicking on the control, then move. I think this is indicative of creating the control outside a container(say, on a form), dragging it into another container(say, a tabControl) and then it not moving within that tabControl. Additionally, try creating new controls within their intended container and then trying to move them.
Close VS, delete C:\Users\user.name\AppData\Local\Microsoft\VisualStudio\15.0_xxxxxxxxx folder
Mouse driver - some software may cause issues here.
Absolute positioning - Tools>Options>Web Form Designer>CSS Styling>Change position...
Right click any item under toolbox and select "reset toolbox"
Requires Reboot...
Close VS. Delete some config files with current dates (devenv.exe.config, toolbox.tbd, toolbox_reset.tbd, toolboxindex.tbd, toolboxindex_reset.tbd) and reboot the PC. These are found in a directory like C:\Users\tdevy97\AppData\Local\Microsoft\VisualStudio\15.0_18c2eb4a where the last folder(15.0_18c2eb4a) is some random name. Reboot. Restart VS.
Corrupt toolbox? Close Visual Studio, Open the “c:\Users\AppData\Local\Microsoft\VisualStudio\14.0” folder and remove all the .TBD files, Start regedit, Find the “HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\14.0\ToolboxControlsInstaller_AssemblyFoldersExCache” and “HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\14.0\ToolboxControlsInstallerCache” keys, Remove everything from these keys leaving them empty, before you removing it, (back up your registry first), Reboot, Run Visual Studio again and wait until it recreates all items in the toolbox.
Last resorts...
Open command prompt as admin, navigate to your "IDE" directory (C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE) and run the following commands...
devenv.exe /resetskippkgs, it will clear all SkipLoading tags that have been added to VSPackages by users who want to avoid loading problem VSPackages.
devenv.exe /resetsettings, it will restore Visual Studio default settings. Optionally resets the settings to the specified .vssettings file.
devenv.exe /resetuserdata, it will take a couple of minutes to run as Visual Studio cleans up and sets itself back to its original state. You may open Task Manager at this point to check whether the devenv.exe process is still running. After it has completed running, you can restart Visual Studio.
devenv.exe /uninstall /force - complete uninstall. Reboot. Reinstall. Rock on!
In my case, I had to change the Dock property to None.
I had this issue and tried solving it using some of the aforementioned methods, including pressing Esc, rebooting, and deleting the folder in AppData, but none of these worked for me.
"Solution"
I have a dual screen setup, and what I eventually did notice is that if Visual Studio starts up on Screen 1 and is then moved to Screen 2, the components will snap back to their initial location after being clicked and dragged. After moving the Visual Studio window back to Screen 1, the components click and drag as usual. I am unsure of the cause of this since it never used to be a problem, but for anyone using dual/multiple screens, this may "solve" the issue.
I just found myself in similar, but slightly different situation - I could drag all controls without the "cross" icon such as buttons, but could not drag any control that had the "cross" icon such as group boxes and panels. One workaround that worked was to use the "arrow" keys to move the controls, but only a computer reboot fixed the issue. The solution, posted by Brett Wolfington did not work in my case.
Found a solution!!
I had the same problem:
Holding the mouse button and trying to move the element with no effects!
My solution:
Try after pressing the mouse button to move the element very slowely - it works!
I think it has maybe something to do with the mouse speed/acceleration settings. I changed them to the maximum. I guess VS has a problem with that. When i move the mouse slowely at the beginning then it works just fine!
Answer to a slightly different question, but my googling lead me here, so perhaps it helps someone else.
If no movement works, also not with keyboard, check the "locked" property. That was it for me in a colleagues project, so I was not aware he had locked it.
The controls also have a tiny lock icon so if you look closely you will notice.
None of these solutions worked for me. These are the steps that worked for me:
Close Visual Studio
Delete the Visual Studio AppData folder, usually at C:\Users\user.name\AppData\Local\Microsoft\VisualStudio. My folder was named 15.0_b148b13d, but your folder may have a similar name.
After deleting, Visual Studio took some time to initialize but I could finally drag the controls.
Seems its a drawing error. The controls actually moves, but there is a short time delay before you see it!
I have really weird problem. In my simple project in c#/winforms I had ToolStrip with inserted standard buttons. It was all ok but suddenly after one restart icons just disappeared. Buttons were still there but with no image.
I was pretty shocked by this and couldn't find any bug. Well, I added another ToolStrip with standard buttons. Icons were there. I noticed, that in Designer.cs file new buttons definitions had line:
this.newToolStripButton1.Image =
((System.Drawing.Image)(resources.GetObject("newToolStripButton1.Image")));
Unfortunately after restart those lines just disappears aswell as the icons.
What could be the problem? How to solve it?
Just had a similar problem where my ToolStripButtons dis-attached themselves form the ToolStrip. I was going along nicely, compiled and ran my program and the ToolStripButtons simply went AWOL.
Doing a web search, this seems to happen occasionally without any real answer as to why.
Looking in the designer file, the 'this.myToolStrip.Items.AddRange' command had disappeared from myToolStrip section of the form, but the buttons where still there.
To fix, I simply added it back (in the Designer file)...
this.myToolStrip.Items.AddRange(new System.Windows.Forms.ToolStripItem[] {
this.myToolStripButton1,
this.myToolStripButton2,
this.myToolStripButton3,
this.myToolStripButton4});
To get the format, just add a new button to the existing ToolStrip and search the designer for 'AddRange'.
I'm working on some C# application to help myself learn C# a bit. I've been searching for a solution, but I can't seem to find one.
When my application minimizes, it shows a notifyicon in the system tray. When I right click it, a context menu pops up on the mouse. However, for each level of the menu and submenu, a blank window pops up on the taskbar until I exit that submenu or the contextmenu.
I don't know why, and I'd like to. I'd also like to know how to prevent that from happening.
Edit
Also, in Visual C# Studio 2010, when debugging, is there a way to determine exactly which form/part of the code I've focused on, so that I could click one of those windows to see what exactly it is?
How are you showing the ContextMenu? I suspect you are calling ContextMenu/ContextMenuStrip.Show(x,y) directly. That will cause it to show in the taskbar.
Instead, assign your ContextMenu/ContextMenuStrip to the ContextMenu/ContextMenuStrip property of your NotifyIcon rather than manually showing it in the mouse click handler. If it is used as part of ContextMenu/ContextMenuStrip property, it won't show in the taskbar.
I'm inside a XAML page, in the Design screen. Somehow I got VS2010 into a mode where it changes the cursor to crosshairs, and when you click you place a UIElement where you clicked. I can't figure out a) how I got into this mode in the first place, and b) how to get out. I like to be able to click on elements in the Design view and automatically navigate to the XAML associated with it, and I can't get back into that mode.
Any ideas?
PS- I'm in Visual Studio Express 2010 for C#, if that makes any difference.
Ok, I figured it out, thanks to Michael Todd. Here is the answer:
The ToolBox usually holds a button for the standard Pointer, which gets you out of the mode I mentioned above. However, if you have edited the display options on the ToolBox, then it may be buried or (possibly?) not visible at all. To fix this, right click on any item in the ToolBox window and select "Reset Toolbox" from the popup menu. The "Pointer" option should now be at the top of the list, under almost every section.