I am loading a native control (C++) into a WPF control using HwndHost. The HwndHost is defined as follows:
class ControlHost : System.Windows.Interop.HwndHost
{
public IntPtr Handle;
protected override HandleRef BuildWindowCore(HandleRef hwndParent)
{
// instantiate the native control
Handle = control.Handle;
return new HandleRef(this, control.Handle);
}
...
}
My WPF project has a System.Windows.Controls.Border named ControlHostElement. The general pattern is to get the handle for the ControlHostElement, instantiate the native control and and set it as a child element of the WPF control. This pattern is prescribed by MSDN here. I am triggering this with a button on the WPF page:
private void btnHwndHost_OnClick(object sender, RoutedEventArgs e)
{
myControlHost = new ControlHost();
ControlHostElement.Child = myControlHost;
}
The problem is that when I instantiate my native control, I get an OS Loader Lock error at the line where Child is assigned:
DLL 'my.dll' is attempting managed execution inside OS Loader lock. Do
not attempt to run managed code inside a DllMain or image
initialization function since doing so can cause the application to
hang.
I'm not sure how I'm inside the loader thread at this point, but I figure I should just spin up a new thread to perform the initialization and window handle assignment:
private void btnHwndHost_OnClick(object sender, RoutedEventArgs e)
{
Thread loadControlHostThread = new Thread(
new ThreadStart(this.loadControlHostThread_DoWork));
loadControlHostThread.SetApartmentState(ApartmentState.STA);
loadControlHostThread.Start();
}
void loadControlHostThread_DoWork()
{
myControlHost = new ControlHost();
ControlHostElement.Child = myControlHost;
}
No dice:
An unhandled exception of type 'System.InvalidOperationException'
occurred in WindowsBase.dll
Additional information: The calling thread cannot access this object
because a different thread owns it.
Fair enough. Maybe I should try asking the UI thread to do this work:
void loadControlHostThread_DoWork()
{
this.Dispatcher.Invoke((Action)(() =>
{
myControlHost = new ControlHost();
ControlHostElement.Child = myControlHost;
}));
}
That results in the same OS Loader Lock error. What is the correct way for me to initialize my native control?
I get an OS Loader Lock error
It is not an error, it is a warning. From an MDA, a Managed Debugger Assistant. They are little slivers of code that Microsoft inserted into the CLR and the debugger to produce warnings when it looks like your program is doing something wrong. The kind that doesn't produce an exception but makes your program hang-up or fail in a very difficult to diagnose way.
Loader lock certainly fits that pattern, it is a deadlock buried inside Windows internals. Associated with the loader, the part of the operating system that's responsible for loading DLLs and calling their DllMain() entrypoint. It takes an internal lock to ensure that the DllMain() functions are called one-at-a-time. It prevents re-entrancy problems, pretty comparable to the kind of trouble Application.DoEvents() causes. A deadlock on that lock is pretty hard to debug, the code is completely buried inside operating system as well as mysterious DllMain() functions you don't know anything about. Very high odds that a real deadlock would get you to tear your head-hair out in major clumps with little to show for it than a bald spot without that MDA.
Unfortunately the MDA tends to produce false warnings. It is not always aware that deadlock cannot actually happen. It is over-eager, a side-effect of it having to predict, crystal-ball style, that it might happen. Without otherwise being able to wire itself into the operating system internals to give you a guaranteed warning. The Windows group at Microsoft hasn't ever been that happy about accommodating managed code, Longhorn was a sore spot for quite a while. Loader lock was a big, big issue in .NET 1.0
It almost certainly is a false warning in your case, you can be dead-sure that the CLR is already loaded, your program could not possibly start otherwise.
Fortunately it is very simple to make it stop bugging you: Debug + Exceptions, open the Managed Debugging Assistants node and untick the "LoaderLock" checkbox. Very high odds that it will leave you in peace from there, allowing you to focus on testing your program.
Related
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}
I am using .net 4.0, with POS.net 1.12 and I create a hardware class in a new child AppDomain so that any unhandled exceptions do not kill my parent AppDomain.
I can create the child AppDomain and make calls to it no problem. However, if I try to unload the AppDomain I get the exception "CannotUnloadAppDomainException".
I have googled the issue and the exception normally occurs when threads cannot be killed. I do not actually create any new threads in the child class.
I managed to pinpoint the piece of code that causes this error. If I create the POS hardware class and it only creates POS objects then it works fine. If, however, I call method "Open()" on any piece of hardware, then this exception occurs when unloading. Now before I attempt the unload, I close down all hardware and I have made sure the clean up code gets hit, so I am unsure what the issue is.
Here is the code to create and unload the AppDomain:
AppDomain hardwareDomain = AppDomain.CreateDomain("Hardware domain");
IHardwareManager hardwareManager =
(IHardwareManager)hardwareDomain.CreateInstanceFromAndUnwrap(typeof(OposHardwareManager).Assembly.Location,
typeof(OposHardwareManager).FullName);
hardwareManager.StartupHardware();
hardwareManager.CloseDownHardware();
hardwareManager = null;
// **** causes exception
AppDomain.Unload(hardwareDomain);
And here is the hardware class:
public class OposHardwareManager : MarshalByRefObject, IHardwareManager
{
private PosExplorer _posExplorer;
private PosPrinter _printer;
public void StartupHardware()
{
// create the hardware explorer
this._posExplorer = new PosExplorer();
// create and enable the printer
DeviceInfo printerInfo = this._posExplorer.GetDevice(DeviceType.PosPrinter);
PosDevice printerDevice = this._posExplorer.CreateInstance(printerInfo);
this._printer = (PosPrinter)printerDevice;
// ***** this line here, if run, causes the exception on unload
this._printer.Open();
this._printer.Claim(2000);
this._printer.DeviceEnabled = true;
}
public void CloseDownHardware()
{
this._printer.Release();
this._printer.Close();
this._printer = null;
this._posExplorer = null;
}
}
Any ideas?
If you are referencing a type in your creating domain (like you do with typeof(OposHardwareManager)), the assembly will be loaded in that domain too. When that happens, iow types crossing the domain boundary 'upwards', the created domain cannot be unloaded.
I suggest you do not reference the assembly containing OposHardwareManager and simply create it with the full qualified name instead. This may involve some refactoring.
In the documentation of AppDomain.Unload it is remarked that:
If a thread does not abort, for example because it is executing
unmanaged code, or because it is executing a finally block, then after
a period of time a CannotUnloadAppDomainException is thrown in the
thread that originally called Unload.
This is probably your case. Look at the documentation of PosDevice on how to properly release the resource.
Also note that an unhandled exception thrown by a thread created in the new AppDomain will crash your whole application. In the documentation of AppDomain.UnhandledException Event it is remarked that:
In the .NET Framework versions 1.0 and 1.1, an unhandled exception
that occurs in a thread other than the main application thread is
caught by the runtime and therefore does not cause the application to
terminate. Thus, it is possible for the UnhandledException event to be
raised without the application terminating. Starting with the .NET
Framework version 2.0, this backstop for unhandled exceptions in child
threads was removed, because the cumulative effect of such silent
failures included performance degradation, corrupted data, and
lockups, all of which were difficult to debug.
Not sure would this help but I founded the same error on Win 7 and XP. During app exit then the app crashed and error thrown. But the fault came from Report Viewer so when unload the form please make sure call
reportviewer.Reset();
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}