I like to delete last line of richtextbox which has ended with ; semicolumn. I like to delete this line until ; semicolumn that comes before the last semicolumn.
Example:
hello do not delete this line;
hello this sentence will continue...
untill here;
result should be:
hello do not delete this line;
My Code:
private void button1_Click_1(object sender, EventArgs e) {
List<string> myList = richTextBox1.Lines.ToList();
if (myList.Count > 0) {
myList.RemoveAt(myList.Count - 1);
richTextBox1.Lines = myList.ToArray();
richTextBox1.Refresh();
}
}
Found the solution here:
RichTextBox1.Lines = RichTextBox1.Lines.Take(RichTextBox1.Lines.Length - 3).ToArray();
Use this:
var last = richTextBox1.Text.LastIndexOf(";");
if (last > 0)
{
richTextBox1.Text = richTextBox1.Text.Substring(0, last - 1);
var beforelast = richTextBox1.Text.LastIndexOf(";");
richTextBox1.Text = richTextBox1.Text.Substring(0, beforelast + 1);
}
else
{
richTextBox1.Text = "";
}
You did not specify the other scenarios(i.e, when the string does not contain ";")
this code removes the string starting at ";" just before the last ";" to the last ";".
It removes the last semicolon and texts after that, then finds the new last ";". finally removes the text after this ";"
For those that find this question after all these years...
The solutions that use the .Text property or .Lines property end up removing the formatting from the existing text. Instead use something like this to preserve formatting:
var i = textBox.Text.LastIndexOf("\n");
textBox.SelectionStart = i;
textBox.SelectionLength = o.TextLength - i + 1;
textBox.SelectedText = "";
Note that if your textbox is in ReadOnly mode, you can't modify SelectedText. In that case you need to set and reset ReadOnly like this:
textBox.ReadOnly = false;
textBox.SelectedText = "";
textBox.ReadOnly = true;
I'm not sure exactly how the rich text box works, but something like
input = {rich text box text}
int index = text.lastIndexOf(";");
if (index > 0)
{
input = input.Substring(0, index);
}
// put input back in text box
How about that ?
string input = "your complete string; Containing two sentences";
List<string> sentences = s.Split(';').ToList();
//Delete the last sentence
sentences.Remove(sentences[sentences.Count - 1]);
string result = string.Join(" ", sentences.ToArray());
int totalcharacters = yourrtb.Text.Trim().Length;
int totalLines = yourrtb.Lines.Length;
string lastLine = yourrtb.Lines[totalLines - 1];
int lastlinecharacters = lastLine.Trim().Length;
yourrtb.Text = yourrtb.Text.Substring(0, totalcharacters - lastlinecharacters);
Related
I have a software which needs to remove all of the characters before "|".
For example input
" text needs to removed | Text needs to stay "
An example output will be
"Text needs to stay"
I have the code down below. It works for single-line text but doesn't work on multiple lines. (only removes the text on the first line rest of them stays the same)
I need to make it work with multiple lines. Any ideas?
string input = richTextBox.Text;
string output = input.Substring(input.IndexOf('|') + 1);
richTextBox1.Text = output;
You could do it easily using the Lines property and a temporary List<string> to store the result of substring
List<string> newLines = new List<string>();
foreach (string s in richTextBox1.Lines)
{
// If you want only the lines with the | remove the else block
int x = s.IndexOf('|');
if(x > -1)
newLines.Add(s.Substring(x + 1).Trim());
else
newLines.Add(s);
}
richTextBox1.Lines = newLines.ToArray();
string output = "";
var myArray = input.Split("\r\n");
foreach(var ar in myArray)
if(ar.Length > 0)
output+= ar.Substring(0, ar.IndexOf('|')) + "\r\n";
Oups! i returned the first part, but i suppose you got the point
What about using LINQ for this.
E.g.:
List<string> lines = yourString.Split("\n"); //Add \r if needed
List<string> smallerLines = lines.Select(x => x.Skip(x.IndexOf('|')+1));
If needed you can always create one new string of the output:
string finalString = String.Join(String.Empty, smallerLines);
string input = richTextBox1.Text;
int len = richTextBox1.Lines.Length;
string output = "";
for (int i = 0; i <len; i++)
{
if(i!=len-1)
{
output += richTextBox1.Lines[i].Substring(input.IndexOf('|') + 1) +
Environment.NewLine;
}
else
{
output += richTextBox1.Lines[i].Substring(input.IndexOf('|') + 1);
}
}
richTextBox1.Text = output;
I have a string like AX_1234X_12345_X_CXY, I want to remove X from after the first underscore _ i.e. from 1234X to 1234. So final output will be like AX_1234_12345_X_CXY. How to do it?? If I use .Replace("X", "") it will replace all X which I don't want
You can iterate trough the string from the first occurrence of '_' .
you can find the first occurrence of '_' using IndexOf().
when loop will get to 'X' it will not append it to the "fixed string".
private static void Func()
{
string Original = "AX_1234X_12345_X_CXY";
string Fixed = Original.Substring(0, Original.IndexOf("_", 0));
// in case you want to remove all 'X`s' after first occurrence of `'_'`
// just dont use that variable
bool found = false;
for (int i = Original.IndexOf("_", 0); i < Original.Length; i++)
{
if (Original[i].ToString()=="X" && found == false)
{
found = true;
}
else
{
Fixed += Original[i];
}
}
Console.WriteLine(Fixed);
Console.ReadLine();
}
Why not good old IndexOf and Substring?
string s = "AX_1234X_12345_X_CXY";
int pUnder = s.IndexOf('_');
if (pUnder >= 0) { // we have underscope...
int pX = s.IndexOf('X', pUnder + 1); // we should search for X after the underscope
if (pX >= 0) // ...as well as X after the underscope
s = s.Substring(0, pX) + s.Substring(pX + 1);
}
Console.Write(s);
Outcome:
AX_1234_12345_X_CXY
string original = #"AX_1234X_12345_X_CXY";
original = #"AX_1234_12345_X_CXY";
One way is String.Remove, because you can tell exactly where to remove from. If the offending "X" is always in the same place, you can use:
string newString = old.Remove(7,1);
This will remove 1 character starting as position 7 (counting from zero as the beginning of the string).
If not always in the same character position, you might try:
int xPos = old.IndexOf("X");
string newString = old.Remove(xPos,1);
EDIT:
Based on OP comment, the "X" we're targeting occurs just after the first underscore character, so let's index off of the first underscore:
int iPosUnderscore = old.IndexOf("_");
string newString = old.Remove(iPosUnderscore + 1 ,1); // start after the underscore
Try looking at string.IndexOf or string.IndexOfAny
string s = "AX_1234X_12345_X_CXY";
string ns = HappyChap(s);
public string HappyChap(string value)
{
int start = value.IndexOf("X_");
int next = start;
next = value.IndexOf("X_", start + 1);
if (next > 0)
{
value = value.Remove(next, 1);
}
return value;
}
If and only if this is always the format then it should be a simple matter of combining substrings of the original text without including the x in that position. But the op hasn't stated that this is always the case. So if this is always the format and the same character position is always removed then you could simply just
string s = "AX_1234X_12345_X_CXY";
string newstring = s.Substring(0, 7) + s.Substring(8);
OK, based on only the second set of numbers being variable in length, you could then do something like:
int startpos = s.IndexOf('_', 4);
string newstring = s.Substring(0, startpos - 1) + s.Substring(startpos);
with this code, the following tests resulted in:
"AX_1234X_12345_X_CXY" became "AX_1234_12345_X_CXY"
"AX_123X_12345_X_CXY" became "AX_123_12345_X_CXY"
"AX_234X_12345_X_CXY" became "AX_234_12345_X_CXY"
"AX_1X_12345_X_CXY" became "AX_1_12345_X_CXY"
Something like this could work. I'm sure there's a more elegant solution.
string input1 = "AX_1234X_12345_X_CXY";
string pattern1 = "^[A-Z]{1,2}_[0-9]{1,4}(X)";
string newInput = string.Empty;
Match match = Regex.Match(input1, pattern1);
if(match.Success){
newInput = input1.Remove(match.Groups[1].Index, 1);
}
Console.WriteLine(newInput);
I have a RichTextBox for a simple chat where I add lines programmatically.
I make the usernames bold and the messages in regular style.
After some lines I want to delete the first lines to keep the chat in a acceptably length. But when I do so I lose the text format and everything appears bold. What am I doing wrong and how can I fix this?
EDIT
I could solve the problem where I wasn't able to delete the first line.
I had to set the the ReadOnly property to false. Even though I was able to add new lines it prevented deleting lines. So the following code works to delete lines. Thanks to #TaW!
if (ChatText.Lines.Length >= 10)
{
int p = 0; int count = 0;
do
{
p = ChatText.Text.IndexOf("\n\r");
if (p >= 0)
{
ChatText.SelectionStart = p;
ChatText.SelectionLength = 2; // length of "\n\r"
ChatText.SelectedText = "\n";
count++;
}
}
while(p >= 0);
int nll = 1; // <<=== pick the length of your new line character(s)!!
int pS = ChatText.Lines.Take(0).Select(x => x.Length + nll).Sum() - nll;
int pL = ChatText.Lines.Take(1).Select(x => x.Length + nll).Sum() - nll;
if (pS < 0) { pS = 0; pL++; }
ChatText.SelectionStart = pS;
ChatText.SelectionLength = pL - pS;
ChatText.Cut();
}
//////////////////////////////////
// now add new lines
//////////////////////////////////
string[] chatstr;
// string text is given as method parameter
chatstr = text.Split(new string[] { ": " }, 2, StringSplitOptions.None);
// go to the end of the text
ChatText.SelectionStart = ChatText.Text.Length;
ChatText.SelectionLength = 0;
// make text bold
ChatText.SelectionFont = new Font(ChatText.Font, FontStyle.Bold);
// add username (chatstr[0]) and colon
ChatText.AppendText(chatstr[0] + ": ");
// make text regular
ChatText.SelectionFont = new Font(ChatText.Font, FontStyle.Regular);
// add message (chatstr[1])
ChatText.AppendText(chatstr[1] + "\n");
// and finaly scroll down
ChatText.ScrollToCaret();
So deleting lines works and new lines are added as intended. Finaly!
solved :)
Never change the Text of a RichtTextBox if it contains any formatting.
Changing the Lines property (by Skip) is just another way to change the Text.
Instead only use the functions the RTB provides: Always start by selecting the portion you want to format, then apply one or more of the functions and/or set one or more of the properties..:
To delete portions use Cut.
Here is a function that will delete a number of entire lines:
void DeleteLines(RichTextBox rtb, int fromLine, int count)
{
int p1 = rtb.GetFirstCharIndexFromLine(fromLine);
int p2 = rtb.GetFirstCharIndexFromLine(fromLine + count);
rtb.SelectionStart = p1;
rtb.SelectionLength = p2 - p1;
bool readOnly = rtb.ReadOnly; // allow change even when the RTB is readonly
rtb.ReadOnly = false; ;
rtb.Cut();
rtb.ReadOnly = readOnly;
}
Trying to keept the formatting alive yourself is a tedious and error-prone waste of your time.
In addition to font properties you would also have to resore all other things you can set with the SelectedXXX properties, like colors, alignment, spacing etc etc..
To delete the first 3 lines use:
DeleteLines(yourRTB, 0, 3);
To restrict the text to 10 lines use:
DeleteLines(yourRTB, 0, yourRTB.Lines.Length - 10);
Note that the function above should have a few checks for valid input; I left them out as the checks somehow need a decision what to do, if count or fromLine if greater than Lines.Length or if fromLine is negative..
While we are at it, here is how to append a bold line:
yourRTB.SelectionStart = yourRTB.Text.Length;
yourRTB.SelectionLength = 0;
using (Font font = new Font(yourRTB.SelectionFont, FontStyle.Bold))
yourRTB.SelectionFont = font;
yourRTB.AppendText(yourNewLine + textOfNewLine);
Of course it really shold go into a reuseable function that the the bolding as a parameter..
Update:
since you are using WordWrap you may prefer this function. It deletes the actual lines, not the visible ones:
void DeleteLinesWW(RichTextBox rtb, int fromLine, int count)
{
int nll = 1; // <<=== pick the length of your new line character(s)!!
int pS = rtb.Lines.Take(fromLine).Select(x => x.Length + nll).Sum() - nll;
int pL = rtb.Lines.Take(fromLine + count).Select(x => x.Length + nll).Sum() - nll;
if (pS < 0) { pS = 0; pL++; }
rtb.SelectionStart = pS;
rtb.SelectionLength = pL - pS ;
bool readOnly = rtb.ReadOnly;
rtb.ReadOnly = false; // allow change even when the RTB is readonly
rtb.Cut();
rtb.ReadOnly = readOnly;
}
A word on NewLine: Do note that I have not used the Environment.NewLine constant as it not really a good idea. If you add multiline text to the RichTextBox in the designer and then look at it you will see that it uses simple '\n' new lines, no returns, no NL-CR, just '\n'. So this seems to be the generic way in a winforms RTB and I recommend using it..
The new function relies on all lines having a newline of the same length!
To make sure you can use this replacement function:
int RTBReplace(RichTextBox rtb, string oldText, string newText)
{
int p = 0; int count = 0;
do
{
p = richTextBox1.Text.IndexOf(oldText);
if (p >= 0)
{
richTextBox1.SelectionStart = p;
richTextBox1.SelectionLength = oldText.Length;
richTextBox1.SelectedText = newText;
count ++;
}
}
while (p >= 0);
return count;
}
Calling it like this:
RTBReplace(yourrichTextBox, "\r\n", "\n");
Update 2:
Here is an example how to add your chat lines:
private void button1_Click(object sender, EventArgs e)
{
string cLine = "Taw: Hello World"; // use your own lines!
var chatstr = cLine.Split(new string[] { ": " }, 2, StringSplitOptions.None);
AppendLineBold(yourrichTextBox, "\n" + chatstr[0], true);
AppendLineBold(yourrichTextBox, chatstr[1], false);
yourrichTextBox.ScrollToCaret();
}
void AppendLineBold(RichTextBox rtb, string text, bool bold)
{
rtb.SelectionStart = richTextBox1.Text.Length;
rtb.SelectionLength = 0;
using (Font font = new Font(rtb.SelectionFont,
bold ? FontStyle.Bold : FontStyle.Regular))
rtb.SelectionFont = font;
rtb.AppendText(text);
}
Update 3:
Looks like the ReadOnly property disallows the use of Cut. So we need to temporatily allow changes.
Funny: SelectedText can't be set either, but AppendText works fine..
To keep text formatting, you can also try the following (it's a little shorter and should also do the trick)
string text = "Username: hello this is a chat message";
// delete the first line when after 10 lines
if (ChatText.Lines.Length >= 10)
{
ChatText.SelectionStart = 0; // set SelectionStart to the beginning of chat text (RichTextBox)
ChatText.SelectionLength = ChatText.Text.IndexOf("\n", 0) + 1; // select the first line
ChatText.SelectedText = ""; // replace by an empty string
ChatText.SelectionStart = ChatText.Text.Length; // set SelectionStart to text end to make SelectionFont work for appended text
}
// split the string in chatstr[0] = username, chatstr[1] = message
string[] chatstr = text.Split(new string[] { ": " }, 2, StringSplitOptions.None);
// make the username bold
ChatText.SelectionFont = new Font(ChatText.Font, FontStyle.Bold);
ChatText.AppendText(chatstr[0] + ": ");
// make the message regular
ChatText.SelectionFont = new Font(ChatText.Font, FontStyle.Regular);
ChatText.AppendText(chatstr[1] + Environment.NewLine);
ChatText.ScrollToCaret();
This is the code:
private void retrivingText1()
{
string startTag = "zethrone1_03510";//"<Translation>";
string endTag = "-2.8";//"</Translation>";
int startTagWidth = startTag.Length;
int endTagWidth = endTag.Length;
index = 0;
w = new StreamWriter(#"d:\retrivedText1.txt");
while (true)
{
index = f.IndexOf(startTag, index);
if (index == -1)
{
break;
}
// else more to do - index now is positioned at first character of startTag
int start = index + startTagWidth;
index = f.IndexOf(endTag, start + 1);
if (index == -1)
{
break;
}
// found the endTag
string g = f.Substring(start, index - start);
w.WriteLine(g);
}
w.Close();
}
The first work in the file that I want to retrieve is Hallo? which is coming right after zethrone1_03510 but between zethrone1_03510 and Hallo? there are two spaces so I'm getting it in the new text file like this Hallo?
And I want it to be Hallo? without the two spaces after zethrone1_03510 that's one problem.
The second problem is that in the end of the file there is a text -2.8 so I want to retrieve all the text from the first Hallo? including it until the end of the file or until the last -2.8 including it too. Since there are more places after the Hallo? with -2.8
I tried to use LastIndexOf instead of IndexOf but it didn't work.
And I know there are other ways but I want to do it with my code to fix/repair my code not using another way of codes. Whats wrong here ?
Thanks.
For your first problem you could use the Trim() method to get rid of the space. you could Trim your resulting string like: (" Hallo").Trim(); or variable.Trim(); which results in "Hallo".
LastIndexOf should work with your second problem . You could use int position = f.LastIndexOf (endTag); And after you found the text you should break from the loop so you don't have an endless loop.
http://msdn.microsoft.com/en-us/library/0w96zd3d.aspx
private void retrivingText1()
{
string startTag = "zethrone1_03510";//"<Translation>";
string endTag = "-2.8";//"</Translation>";
int startTagWidth = startTag.Length;
int endTagWidth = endTag.Length;
index = 0;
w = new StreamWriter(#"d:\retrivedText1.txt");
while (true)
{
index = f.IndexOf(startTag, index);
if (index == -1)
{
break;
}
// else more to do - index now is positioned at first character of startTag
int start = index + startTagWidth;
index = f.LastIndexOf (endTag, start + 1);
if (index == -1)
{
break;
}
// found the endTag
string g = f.Substring(start, index - start + endTagWidth).Trim(); //Trim the founded text so the start and ending spaces are removed.
w.WriteLine(g);
//break so you dont have an endless loop
break;
}
w.Close();
}
How can the first letter in a text be set to capital?
Example:
it is a text. = It is a text.
public static string ToUpperFirstLetter(this string source)
{
if (string.IsNullOrEmpty(source))
return string.Empty;
// convert to char array of the string
char[] letters = source.ToCharArray();
// upper case the first char
letters[0] = char.ToUpper(letters[0]);
// return the array made of the new char array
return new string(letters);
}
It'll be something like this:
// precondition: before must not be an empty string
String after = before.Substring(0, 1).ToUpper() + before.Substring(1);
polygenelubricants' answer is fine for most cases, but you potentially need to think about cultural issues. Do you want this capitalized in a culture-invariant way, in the current culture, or a specific culture? It can make a big difference in Turkey, for example. So you may want to consider:
CultureInfo culture = ...;
text = char.ToUpper(text[0], culture) + text.Substring(1);
or if you prefer methods on String:
CultureInfo culture = ...;
text = text.Substring(0, 1).ToUpper(culture) + text.Substring(1);
where culture might be CultureInfo.InvariantCulture, or the current culture etc.
For more on this problem, see the Turkey Test.
If you are using C# then try this code:
Microsoft.VisualBasic.StrConv(sourceString, Microsoft.VisualBasic.vbProperCase)
I use this variant:
private string FirstLetterCapital(string str)
{
return Char.ToUpper(str[0]) + str.Remove(0, 1);
}
If you are sure that str variable is valid (never an empty-string or null), try:
str = Char.ToUpper(str[0]) + str[1..];
Unlike the other solutions that use Substring, this one does not do additional string allocations. This example basically concatenates char with ReadOnlySpan<char>.
I realize this is an old post, but I recently had this problem and solved it with the following method.
private string capSentences(string str)
{
string s = "";
if (str[str.Length - 1] == '.')
str = str.Remove(str.Length - 1, 1);
char[] delim = { '.' };
string[] tokens = str.Split(delim);
for (int i = 0; i < tokens.Length; i++)
{
tokens[i] = tokens[i].Trim();
tokens[i] = char.ToUpper(tokens[i][0]) + tokens[i].Substring(1);
s += tokens[i] + ". ";
}
return s;
}
In the sample below clicking on the button executes this simple code outBox.Text = capSentences(inBox.Text.Trim()); which pulls the text from the upper box and puts it in the lower box after the above method runs on it.
Take the first letter out of the word and then extract it to the other string.
strFirstLetter = strWord.Substring(0, 1).ToUpper();
strFullWord = strFirstLetter + strWord.Substring(1);
text = new String(
new [] { char.ToUpper(text.First()) }
.Concat(text.Skip(1))
.ToArray()
);
this functions makes capital the first letter of all words in a string
public static string FormatSentence(string source)
{
var words = source.Split(' ').Select(t => t.ToCharArray()).ToList();
words.ForEach(t =>
{
for (int i = 0; i < t.Length; i++)
{
t[i] = i.Equals(0) ? char.ToUpper(t[i]) : char.ToLower(t[i]);
}
});
return string.Join(" ", words.Select(t => new string(t)));;
}
string str = "it is a text";
// first use the .Trim() method to get rid of all the unnecessary space at the begining and the end for exemple (" This string ".Trim() is gonna output "This string").
str = str.Trim();
char theFirstLetter = str[0]; // this line is to take the first letter of the string at index 0.
theFirstLetter.ToUpper(); // .ToTupper() methode to uppercase the firstletter.
str = theFirstLetter + str.substring(1); // we add the first letter that we uppercased and add the rest of the string by using the str.substring(1) (str.substring(1) to skip the first letter at index 0 and only print the letters from the index 1 to the last index.)
Console.WriteLine(str); // now it should output "It is a text"
static String UppercaseWords(String BadName)
{
String FullName = "";
if (BadName != null)
{
String[] FullBadName = BadName.Split(' ');
foreach (string Name in FullBadName)
{
String SmallName = "";
if (Name.Length > 1)
{
SmallName = char.ToUpper(Name[0]) + Name.Substring(1).ToLower();
}
else
{
SmallName = Name.ToUpper();
}
FullName = FullName + " " + SmallName;
}
}
FullName = FullName.Trim();
FullName = FullName.TrimEnd();
FullName = FullName.TrimStart();
return FullName;
}
string Input = " it is my text";
Input = Input.TrimStart();
//Create a char array
char[] Letters = Input.ToCharArray();
//Make first letter a capital one
string First = char.ToUpper(Letters[0]).ToString();
//Concatenate
string Output = string.Concat(First,Input.Substring(1));
Try this code snippet:
char nm[] = "this is a test";
if(char.IsLower(nm[0])) nm[0] = char.ToUpper(nm[0]);
//print result: This is a test